Age | Commit message (Collapse) | Author |
|
This patch encompasses several interrelated and interdependent changes
to the ISA generation step. The end goal is to reduce the size of the
generated compilation units for instruction execution and decoding so
that batch compilation can proceed with all CPUs active without
exhausting physical memory.
The ISA parser (src/arch/isa_parser.py) has been improved so that it can
accept 'split [output_type];' directives at the top level of the grammar
and 'split(output_type)' python calls within 'exec {{ ... }}' blocks.
This has the effect of "splitting" the files into smaller compilation
units. I use air-quotes around "splitting" because the files themselves
are not split, but preprocessing directives are inserted to have the same
effect.
Architecturally, the ISA parser has had some changes in how it works.
In general, it emits code sooner. It doesn't generate per-CPU files,
and instead defers to the C preprocessor to create the duplicate copies
for each CPU type. Likewise there are more files emitted and the C
preprocessor does more substitution that used to be done by the ISA parser.
Finally, the build system (SCons) needs to be able to cope with a
dynamic list of source files coming out of the ISA parser. The changes
to the SCons{cript,truct} files support this. In broad strokes, the
targets requested on the command line are hidden from SCons until all
the build dependencies are determined, otherwise it would try, realize
it can't reach the goal, and terminate in failure. Since build steps
(i.e. running the ISA parser) must be taken to determine the file list,
several new build stages have been inserted at the very start of the
build. First, the build dependencies from the ISA parser will be emitted
to arch/$ISA/generated/inc.d, which is then read by a new SCons builder
to finalize the dependencies. (Once inc.d exists, the ISA parser will not
need to be run to complete this step.) Once the dependencies are known,
the 'Environments' are made by the makeEnv() function. This function used
to be called before the build began but now happens during the build.
It is easy to see that this step is quite slow; this is a known issue
and it's important to realize that it was already slow, but there was
no obvious cause to attribute it to since nothing was displayed to the
terminal. Since new steps that used to be performed serially are now in a
potentially-parallel build phase, the pathname handling in the SCons scripts
has been tightened up to deal with chdir() race conditions. In general,
pathnames are computed earlier and more likely to be stored, passed around,
and processed as absolute paths rather than relative paths. In the end,
some of these issues had to be fixed by inserting serializing dependencies
in the build.
Minor note:
For the null ISA, we just provide a dummy inc.d so SCons is never
compelled to try to generate it. While it seems slightly wrong to have
anything in src/arch/*/generated (i.e. a non-generated 'generated' file),
it's by far the simplest solution.
|
|
With (upcoming) separate compilation, they are useless. Only
link-time optimization could re-inline them, but ideally
feedback-directed optimization would choose to do so only for
profitable (i.e. common) instructions.
|
|
This gets rid of cryptic bits of code with lots of bit manipulation, and makes
some comments redundant.
|
|
|
|
|
|
And by "everything" I mean all the quick regressions.
|
|
|
|
Add a few constants and functions that the InOrder model wants for SPARC.
* * *
sparc: add eaComp function
InOrder separates the address generation from the actual access so give
Sparc that functionality
* * *
sparc: add control flags for branches
branch predictors and other cpu model functions need to know specific information
about branches, so add the necessary flags here
|
|
|
|
|
|
|
|
|
|
Even though we're not incorrect about operator precedence, let's add
some parens in some particularly confusing places to placate GCC 4.3
so that we don't have to turn the warning off. Agreed that this is a
bit of a pain for those users who get the order of operations correct,
but it is likely to prevent bugs in certain cases.
|
|
--HG--
extra : convert_revision : 3c22e576d95bdc7566bbce9b92cf2a6ff153a66f
|
|
into doughnut.hpl.hp.com:/home/gblack/newmem-o3-micro
src/cpu/base_dyn_inst_impl.hh:
src/cpu/o3/fetch_impl.hh:
Hand merge
--HG--
extra : convert_revision : 0c0692033ac30133672d8dfe1f1a27e9d9e95a3d
|
|
src/arch/x86/isa/macroop.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also fill out the emulation environment handling a little more, and use an object to pass around output code.
src/arch/x86/isa/microops/base.isa:
Make microOp vs microop and macroOp vs macroop capitilization consistent. Also adjust python to C++ bool translation.
--HG--
extra : convert_revision : 6f4bacfa334c42732c845f9a7f211cbefc73f96f
|
|
into doughnut.mwconnections.com:/home/gblack/newmem-o3-micro
--HG--
extra : convert_revision : 545b9e98eb1895f4b9e782224fb6615c71ed6323
|
|
to use the architecture's TLB, at which point this can be removed.
--HG--
extra : convert_revision : 54f3c18e5aead727d0ac244ed00fd97d3ca8ad75
|
|
though I don't believe that's true. Placate it anyway.
--HG--
extra : convert_revision : dcd9427af14f0e7a33510054bee4ecbe73e050be
|
|
implementations from using doubles to using concatenated singles.
--HG--
extra : convert_revision : 609ba35bbb13cbd1998e93957cb051461442d1f9
|
|
IsStoreConditional flag needs to be set for them because they aren't store conditional instructions, and I should fix the format code which is not handling the opt_flags correctly.
--HG--
extra : convert_revision : cfd32808592832d7b6fbdaace5ae7b17c8a246e9
|
|
--HG--
extra : convert_revision : 368d1c57a46fd5ca15461cb5ee8e05fd1e080daa
|
|
conditional swaps as well
Add support for a twin 64 bit int load
Add Memory barrier and write barrier flags as appropriate
Make atomic memory ops atomic
src/arch/alpha/isa/mem.isa:
src/arch/alpha/locked_mem.hh:
src/cpu/base_dyn_inst.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_impl.hh:
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/arch/alpha/types.hh:
src/arch/mips/types.hh:
src/arch/sparc/types.hh:
add a largest read data type for statically allocating read buffers in atomic simple cpu
src/arch/isa_parser.py:
Add support for a twin 64 bit int load
src/arch/sparc/isa/decoder.isa:
Make atomic memory ops atomic
Add Memory barrier and write barrier flags as appropriate
src/arch/sparc/isa/formats/mem/basicmem.isa:
add post access code block and define a twinload format for twin loads
src/arch/sparc/isa/formats/mem/blockmem.isa:
remove old microcoded twin load coad
src/arch/sparc/isa/formats/mem/mem.isa:
swap.isa replaces the code in loadstore.isa
src/arch/sparc/isa/formats/mem/util.isa:
add a post access code block
src/arch/sparc/isa/includes.isa:
need bigint.hh for Twin64_t
src/arch/sparc/isa/operands.isa:
add a twin 64 int type
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
add support for twinloads
add support for swap and conditional swap instructions
rename store conditional stuff as extra data so it can be used for conditional swaps as well
src/mem/packet.cc:
src/mem/packet.hh:
Add support for atomic swap memory commands
src/mem/packet_access.hh:
Add endian conversion function for Twin64_t type
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
Add support for atomic swap memory commands
Rename sc code to extradata
--HG--
extra : convert_revision : 69d908512fb34a4e28b29a6e58b807fb1a6b1656
|
|
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/system.cc:
Hand Merge
--HG--
extra : convert_revision : d5e0c97caebb616493e2f642e915969d7028109c
|
|
some fixes to fp instructions to use the single precision registers
if this is an fp op emit fp check code
add fpregs to m5legion struct
src/arch/sparc/floatregfile.cc:
Make Sparc traceflag even more chatty
src/arch/sparc/isa/base.isa:
add code to check if the fpu is enabled
src/arch/sparc/isa/decoder.isa:
some fixes to fp instructions to use the single precision registers
fix smul again
fix subc/subcc/subccc condition code setting
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/mem/util.isa:
if this is an fp op emit fp check code
src/cpu/exetrace.cc:
check fp regs as well as int regs
src/cpu/m5legion_interface.h:
add fpregs to m5legion struct
--HG--
extra : convert_revision : e7d26d10fb8ce88f96e3a51f84b48c3b3ad2f232
|
|
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
src/arch/sparc/isa/decoder.isa:
fix smul and sdiv to sign extend, and handle overflow/underflow corretly
Only allow writing/reading of 32 bits of Y
Only allow writing/reading 32 bits of pc when pstate.am
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/formats/mem/blockmem.isa:
Put any loaded data on the first half of a micro-op in uReg0 so it can't
overwrite the register we are using for address calculation
src/arch/sparc/isa/includes.isa:
Use limits for 32bit underflow/overflow detection
src/arch/sparc/tlb.cc:
only erase a entry from the lookup table if it's valid
Put in a temporary check to make sure that lookup table and tlb array stay in sync
src/arch/sparc/tlb_map.hh:
add a print function to dump the tlb lookup table
src/cpu/simple/base.cc:
if we are interrupted in the middle of a mico-op, reset the micropc/nexpc
so we start on the first part of it when we come back
--HG--
extra : convert_revision : 50a23837fd888393a5c2aa35cbd1abeebb7f55d4
|
|
into ewok.(none):/home/gblack/m5/newmemo3
src/sim/byteswap.hh:
Hand Merge
--HG--
extra : convert_revision : 640d33ad0c416934e8a5107768e7f1dce6709ca8
|
|
Increment instruction count on first micro-op instead of last
src/arch/sparc/isa/decoder.isa:
Implement a twin load for ASI_LDTX_P(0xe2)
src/arch/sparc/isa/formats/mem/blockmem.isa:
set the new flag IsFirstMicroOp when needed
src/cpu/simple/atomic.cc:
Increment instruction count on first micro-op instead of last (because if we take a fault on a micro coded instruction it should be counted twice acording to legion)
src/cpu/static_inst.hh:
Add IsFirstMicroop flag to static insts
--HG--
extra : convert_revision : 02bea93d38c03bbafe4570665eb4c01c11caa2fc
|
|
into zower.eecs.umich.edu:/eecshome/m5/newmem
--HG--
extra : convert_revision : f4a05accb8fa24d425dd818b1b7f268378180e99
|
|
bugfixes and demap implementation in tlb
ignore some more differencs for one cycle
src/arch/sparc/isa/formats/mem/blockmem.isa:
twinx has 2 micro-ops
src/arch/sparc/isa/formats/mem/util.isa:
fix the fault check for twinx
src/arch/sparc/tlb.cc:
tlb bugfixes and write demapping code
src/cpu/exetrace.cc:
don't halt on a couple more instruction (ldx, stx) when things differ
beacuse of the way tlb faults are handled in legion.
--HG--
extra : convert_revision : 1e156dead6ebd58b257213625ed63c3793ef4b71
|
|
--HG--
extra : convert_revision : f41183cfa011b21e7ab8cbcdef0ac1d464692362
|
|
into zizzer.eecs.umich.edu:/z/m5/Bitkeeper/sparco3
--HG--
extra : convert_revision : f17800685609d8353ec14676f45fbb123fc4e6c3
|
|
--HG--
extra : convert_revision : d81e0d1356f3433e8467e407d66d4afb95614748
|
|
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/operands.isa:
Hand Merge
--HG--
extra : convert_revision : 4c54544e5c7a61f055ea9b00ccf5f8510df0e6c2
|
|
src/arch/sparc/isa/decoder.isa:
Added the extended twin load instructions
src/arch/sparc/isa/formats/mem/blockmem.isa:
Added stuff to implement the extended twin loads. This created alot of duplication which I'll deal with later.
--HG--
extra : convert_revision : 5d8bdaacbfe83d21d3a396ce30ace90aeefc54d8
|
|
--HG--
extra : convert_revision : bf650dfe401377ce1b4c952aa8bfe3708c865472
|
|
src/arch/sparc/isa/decoder.isa:
Changed the names of the twin loads to match the 2005 spec. They still use the old format though.
src/arch/sparc/isa/formats/mem/blockmem.isa:
Added code to generate twin loads
src/arch/sparc/isa/formats/mem/util.isa:
Added an alignment check for twin loads
src/arch/sparc/isa/operands.isa:
Comment explaining twin load operands.
--HG--
extra : convert_revision : ad42821a97dcda17744875b1e5dc00a9642e59b7
|
|
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/arch/isa_parser.py:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
src/cpu/o3/iew_impl.hh:
Hand Merge
--HG--
extra : convert_revision : ae1b25cde85ab8ec275a09d554acd372887d4d47
|
|
split execute instructions and miscregs aliasing with integer registers.
src/arch/isa_parser.py:
Rearranged things so that classes with more than one execute function treat operands properly.
1. Eliminated the CodeBlock class
2. Created a SubOperandList
3. Redefined how InstObjParams is constructed
To define an InstObjParam, you can either pass in a single code literal which will be named "code", or you can pass in a dictionary of code snippets which will be substituted into the Templates. In order to get this to work, there is a new restriction that each template has only one function in it. These changes should only affect memory instructions which have regular and split execute functions.
Also changed the MiscRegs so that they use the instrunctions srcReg and destReg arrays.
src/arch/sparc/isa/formats/basic.isa:
src/arch/sparc/isa/formats/branch.isa:
src/arch/sparc/isa/formats/integerop.isa:
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
src/arch/sparc/isa/formats/mem/util.isa:
src/arch/sparc/isa/formats/nop.isa:
src/arch/sparc/isa/formats/priv.isa:
src/arch/sparc/isa/formats/trap.isa:
Rearranged to work with new InstObjParam scheme.
src/cpu/o3/sparc/dyn_inst.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays. Also changed the names of the other accessors so that they have the suffix "Operand" if they use those arrays.
src/cpu/simple/base.hh:
Added functions to access the miscregs using the indexes from instructions srcReg and destReg arrays.
--HG--
extra : convert_revision : c91e1073138b72bcf4113a721e0ed40ec600cf2e
|
|
getting touched.
configs/common/FSConfig.py:
Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
Fix AsiIsNucleus spelling with respect to header file
Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
Flesh out priviledgedString with hypervisor checks
Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
add an IPR traceflag
src/mem/request.hh:
Fix a bad assert() in request
--HG--
extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
|
|
result of a store conditional.
--HG--
extra : convert_revision : d36ff9e2343fdf78a3bc16a1348975fdba5c55e2
|
|
--HG--
extra : convert_revision : 4a985635cda7680abcddaf0bc9579fa03d5bc7c6
|
|
--HG--
extra : convert_revision : 7bdf68f445b79b1b5dbcdfa5fa1005c68d03724c
|
|
--HG--
extra : convert_revision : 863d395f8e7c8ee2aec708ffcef842317ec9a89b
|
|
in the future for micro insts.
--HG--
extra : convert_revision : c71faa5e43b56ed15d00ed5fd57c020d1c845445
|
|
--HG--
extra : convert_revision : ab6cd69f82b2013d66a91beaa3e39d8f417a9251
|
|
src/arch/sparc/isa/decoder.isa:
Fix up the casa and casxa instructions.
src/arch/sparc/isa/formats/formats.isa:
This is handled in loadstore.isa now
src/arch/sparc/isa/formats/mem/basicmem.isa:
src/arch/sparc/isa/formats/mem/blockmem.isa:
Renamed doSplitExecute to doDualSplitExecute. This differentiates between the version that does both a register and immediate version, and one that just does a register version.
src/arch/sparc/isa/formats/mem/mem.isa:
The cas format is handled in loadstore.isa as well now.
src/arch/sparc/isa/formats/mem/util.isa:
Reorganized things a bit to better support cas
--HG--
extra : convert_revision : 12411e89e763287e52f9825bf7a417b263c1037f
|
|
with the timing cpu
--HG--
extra : convert_revision : 37358504c4d05d78d08c19ba3d0c99d38c4babf5
|
|
memory operations in the SPARC ISA description.
--HG--
rename : src/arch/sparc/isa/formats.isa => src/arch/sparc/isa/formats/formats.isa
rename : src/arch/sparc/isa/formats/mem.isa => src/arch/sparc/isa/formats/mem/basicmem.isa
rename : src/arch/sparc/isa/formats/blockmem.isa => src/arch/sparc/isa/formats/mem/blockmem.isa
rename : src/arch/sparc/isa/formats/mem.isa => src/arch/sparc/isa/formats/mem/mem.isa
extra : convert_revision : dbbb00f997a102871b084b209b9fa08c5e1853ee
|