Age | Commit message (Collapse) | Author |
|
These fix what I believe are some bugs, and also some gcc warnings.
Change-Id: I5fb2a1b2f0ef3643b25aaf0c29c096996ef98ec0
Reviewed-on: https://gem5-review.googlesource.com/9402
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
|
|
Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.
|
|
This register is writable according to UA2005
Tried to boot NetBSD which starts the kernel by writing to the tick_cmpr
register. Without the patch gem5 crashes with a panic. With the patch NetBSD
starts to boot normally (although sun4v support in NetBSD is not complete yet)
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This patch addresses the comments and feedback on the preceding patch
that reworks the clocks and now more clearly shows where cycles
(relative cycle counts) are used to express time.
Instead of bumping the existing patch I chose to make this a separate
patch, merely to try and focus the discussion around a smaller set of
changes. The two patches will be pushed together though.
This changes done as part of this patch are mostly following directly
from the introduction of the wrapper class, and change enough code to
make things compile and run again. There are definitely more places
where int/uint/Tick is still used to represent cycles, and it will
take some time to chase them all down. Similarly, a lot of parameters
should be changed from Param.Tick and Param.Unsigned to
Param.Cycles.
In addition, the use of curTick is questionable as there should not be
an absolute cycle. Potential solutions can be built on top of this
patch. There is a similar situation in the o3 CPU where
lastRunningCycle is currently counting in Cycles, and is still an
absolute time. More discussion to be had in other words.
An additional change that would be appropriate in the future is to
perform a similar wrapping of Tick and probably also introduce a
Ticks class along with suitable operators for all these classes.
|
|
This gets rid of cryptic bits of code with lots of bit manipulation, and makes
some comments redundant.
|
|
|
|
|
|
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help
|
|
This step makes it easy to replace the accessor functions
(which still access a global variable) with ones that access
per-thread curTick values.
|
|
|
|
|
|
Basically merge it in with Halted.
Also had to get rid of a few other functions that
called ThreadContext::deallocate(), including:
- InOrderCPU's setThreadRescheduleCondition.
- ThreadContext::exit(). This function was there to avoid terminating
simulation when one thread out of a multi-thread workload exits, but we
need to find a better (non-cpu-centric) way.
|
|
|
|
|
|
the primary identifier for a hardware context should be contextId(). The
concept of threads within a CPU remains, in the form of threadId() because
sometimes you need to know which context within a cpu to manipulate.
|
|
across the subclasses. generally make it so that member data is _cpuId and
accessor functions are cpuId(). The ID val comes from the python (default -1 if
none provided), and if it is -1, the index of cpuList will be given. this has
passed util/regress quick and se.py -n4 and fs.py -n4 as well as standard
switch.
|
|
|
|
For now, there is still a single global event queue, but this is
necessary for making the steps towards a parallelized m5.
|
|
|
|
--HG--
extra : convert_revision : 790eddb793d4f5ba35813d001037bd8601bd76a5
|
|
src/arch/sparc/ua2005.cc:
fix interrupting when quisced. Since sticks correspond to instructions when not quisced we need to
check if were suspended and interrupt at the guess time
src/base/traceflags.py:
add trace flag for Iob
src/cpu/simple/base.cc:
Use Quisce instead of IPI trace flag
src/dev/sparc/iob.cc:
add some Dprintfs
--HG--
extra : convert_revision : 72e18fcc750ad1e4b2bb67b19b354eaffc6af6d5
|
|
src/arch/sparc/miscregfile.cc:
this code should be in readFSreg
src/arch/sparc/ua2005.cc:
move code froh miscregfile to ua2005.cc
--HG--
extra : convert_revision : fa450b04ad73ab6f6e25d66fa0368054263f09f9
|
|
src/arch/alpha/utility.hh:
src/arch/mips/utility.hh:
src/arch/sparc/utility.hh:
src/arch/x86/utility.hh:
add hook for system to startup the cpu or not... in the case of FS sparc, only the first cpu would get spunup.. the rest sit in an idle state until they get an ipi
src/arch/sparc/isa/decoder.isa:
handle writable bits of strandstatus register in miscregfile
src/arch/sparc/miscregfile.hh:
some constants for the strand status register
src/arch/sparc/ua2005.cc:
properly implement the strand status register
src/dev/sparc/iob.cc:
implement ipi generation properly
src/sim/system.cc:
call into the ISA to start the CPU (or not)
--HG--
extra : convert_revision : 0003b2032337d8a031a9fc044da726dbb2a9e36f
|
|
--HG--
extra : convert_revision : 19fce78a19b27b7ccb5e3653a64b46e6d5292915
|
|
--HG--
extra : convert_revision : f799b65f1b2a6bf43605e6870b0f39b473dc492b
|
|
configs/common/FSConfig.py:
Use binaries we've compiled instead of the ones that come with Legion
src/arch/alpha/interrupts.hh:
get rid of post(int int_type) and add a get_vec function that gets the interrupt vector for an interrupt number
src/arch/sparc/asi.cc:
Add AsiIsInterrupt() to AsiIsMmu()
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
Add InterruptVector type
src/arch/sparc/interrupts.hh:
rework interrupts. They are no longer cleared when created... A I/O or ASI read/write needs to happen before they are cleared
src/arch/sparc/isa_traits.hh:
Add the "interrupt" trap types to isa traits
src/arch/sparc/miscregfile.cc:
add names for all the misc registers and possible post an interrupt when TL is changed.
src/arch/sparc/miscregfile.hh:
Add a helper function to post an interrupt when pil < some set softint
src/arch/sparc/regfile.cc:
src/arch/sparc/regfile.hh:
InterruptLevel shouldn't really live here, moved to interrupt.hh
src/arch/sparc/tlb.cc:
Add interrupt ASIs to TLB
src/arch/sparc/ua2005.cc:
Add checkSoftInt to check if a softint needs to be posted
Check that a tickCompare isn't scheduled before scheduling one
Post and clear interrupts on queue writes and what not
src/base/bitfield.hh:
Add an helper function to return the msb that is set
src/cpu/base.cc:
src/cpu/base.hh:
get rid of post_interrupt(type) since it's no longer needed.. Add a way to see what interrupts are pending
src/cpu/intr_control.cc:
src/cpu/intr_control.hh:
src/dev/alpha/tsunami_cchip.cc:
src/python/m5/objects/IntrControl.py:
Make IntrControl have a system pointer rather than using a cpu pointer to get one
src/dev/sparc/SConscript:
add iob to SConsscrip
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.ini:
tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing/config.out:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini:
tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out:
update config.ini/out for intrcntrl not having a cpu pointer anymore
--HG--
extra : convert_revision : 38614f6b9ffc8f3c93949a94ff04b7d2987168dd
|
|
into zed.eecs.umich.edu:/z/hsul/work/sparc/x86.m5
--HG--
extra : convert_revision : 1b854ec7caa33d3009383754206b643494c4c42d
|
|
--HG--
extra : convert_revision : 58e960e5019f944c7ec5606e4b8c93ce42330719
|
|
simplify and make complete some asi checks
implement all the twin asis and remove panic checks on their use
soft int is supported, so we don't need to print writes to it
src/arch/sparc/asi.cc:
make AsiIsLittle() be all the little asis.
Speed up AsiIsTwin() a bit
src/arch/sparc/faults.cc:
clean up the do*Fault code.... Make it work like legion, in particular
pstate.priv is left alone, not set to 0 like the spec says
src/arch/sparc/isa/decoder.isa:
implement some more twin ASIs
src/arch/sparc/tlb.cc:
All the twin asis are implemented, no need to say their not supported anymore
src/arch/sparc/ua2005.cc:
softint is supported now, no more need to
--HG--
extra : convert_revision : aef2a1b93719235edff830a17a8ec52f23ec9f8b
|
|
src/arch/sparc/interrupts.hh:
condition hstick matches on HINTP
src/arch/sparc/miscregfile.cc:
implement HINTP
src/arch/sparc/ua2005.cc:
don't post interrupt unless it is enabled.
--HG--
extra : convert_revision : f71d1c1d9fd1a898ddafd5a885c3a8d5c75e8ff0
|
|
into zed.eecs.umich.edu:/z/hsul/work/sparc/m5
src/arch/sparc/ua2005.cc:
hand merge between ali and me.
--HG--
extra : convert_revision : 810d63fb484ab26fc30f8130ef32390ba149b267
|
|
formatting/indentation for case statements
src/arch/sparc/ua2005.cc:
formatting/indentation for case statements
--HG--
extra : convert_revision : aeb7d0274d8d22db3fa56aabbb8ab8f5371a32ff
|
|
i SWEAR i committed this already, but apparently i didnt. ust start using HPSTATE::hpriv, etc. to access bitfields.
src/arch/sparc/ua2005.cc:
i SWEAR i committed this already, but apparently i didnt. ust start using HPSTATE::hpriv, etc. to access bitfields.
--HG--
extra : convert_revision : e66fac9c63088c0fc1a62bd0fac92df305beadff
|
|
fix implementation of cwp manipulation
implement PS0 and PS1 IMMU asis
src/arch/sparc/miscregfile.cc:
get rid of some warnings
fix implementation of setting cwp to saturate cwp since it appears the os sets it to a large value to see how many there actually are
src/arch/sparc/tlb.cc:
implement PS0 and PS1 IMMU access ASIs
src/arch/sparc/ua2005.cc:
make warning less verbose
--HG--
extra : convert_revision : 442b65dfc41ebc32b2ef0e6b80da94eee3be9cd3
|
|
CPU->checkInterrupts bool is inconsistent, and i think should eventually be phased out. For now, I've just assumed that CPU->checkInterrupts() is the way to fast path a CPU if you have no interrupts by having a simple bitfield in each ISA to determine whether interrupts are pending. getInterrupts has been mostly filled in.
src/arch/sparc/interrupts.hh:
fill in how we do interrupts on sparc a little bit.
1) create a bitfield for interrupts, and check that in checkInterrupts() to fast path CPU.
2) fill in getInterrupts() a little bit.
also, update the bitfield access to be HPSTATE::hpriv, etc.
src/arch/sparc/ua2005.cc:
1) update formatting
2) change the way interrupts are done to use the new way to tickle the CPU.
src/cpu/base.cc:
src/cpu/base.hh:
overload the post_interrupt function for SPARC interrupts - which are only denoted by a single int value.
--HG--
extra : convert_revision : 9074a003eff37a40dcce78f56d20f6cbcc453eb5
|
|
to do the acutal interrupting still
src/arch/sparc/miscregfile.cc:
fix softint and fprs in miscregfile
--HG--
extra : convert_revision : cf98bd9c172e20f328f18e07dd05f63f37f14c87
|
|
there is no interrupt_level_0 interrupt, so start the list at 0x40 so the adding is done correctly
src/arch/sparc/faults.cc:
there is no interrupt_level_0 interrupt, so start the list at 0x40 so the adding is done correctly
src/arch/sparc/faults.hh:
correct protection defines
src/arch/sparc/ua2005.cc:
set the softint appropriately on an timer compare interrupt
--HG--
extra : convert_revision : f41c10ec78db973b3f856c70b58a17f83b60bbe2
|
|
appropriate time
turn warnings into dprintfs
src/arch/sparc/miscregfile.cc:
turn dprintfn into dprintfs
--HG--
extra : convert_revision : cd313e9037c8f040d837de4c7ddbcf98534e60ad
|
|
--HG--
extra : convert_revision : d25604156ae0b2cf29d92fb960b8f5d77427985b
|
|
into zed.eecs.umich.edu:/z/hsul/work/sparc/m5
src/arch/sparc/ua2005.cc:
hand merge
--HG--
extra : convert_revision : 5157fa5d7053cb93f73241c63871eaae6f58b8a6
|
|
src/arch/sparc/interrupts.hh:
add in thread_context.hh to get access to tc.
get rid of stubs that don't make sense right now.
implement checking and get softint interrupts
src/arch/sparc/miscregfile.cc:
softint should be OR-ed on a write.
src/arch/sparc/miscregfile.hh:
add some enums for state fields for easy access to bitmasks of HPSTATE and PSTATE regs.
src/arch/sparc/ua2005.cc:
implement writing SOFTINT, PSTATE, PIL, and HPSTATE properly, add helpful info to panic for bad reg write.
--HG--
extra : convert_revision : d12d1147b508121075ee9be4599693554d4b9eae
|
|
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
add sparc error asi
src/arch/sparc/faults.cc:
put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
add sparc error register code that just does nothing
fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
fix implementation of HPSTATE write
src/cpu/exetrace.cc:
let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
add l2 error status register fake devices
--HG--
extra : convert_revision : ed5dfdfb28633bf36e5ae07d244f7510a02874ca
|
|
file (reducing the number of if FULL_SYSTEM defines and includes)
Protect other pieces of code so that sparc compiles SE again
src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
--HG--
extra : convert_revision : 6b3c9f6f95b4da8544525f4f82e92861383ede76
|
|
--HG--
rename : docs/footer.html => src/doxygen/footer.html
rename : docs/stl.hh => src/doxygen/stl.hh
extra : convert_revision : 2b2e5637930843c1be07deaa708fd4126213cda2
|
|
between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh.
Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar.
src/arch/alpha/arguments.cc:
src/arch/alpha/arguments.hh:
src/arch/alpha/ev5.cc:
src/arch/alpha/faults.cc:
src/arch/alpha/faults.hh:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/freebsd/system.hh:
src/arch/alpha/isa/branch.isa:
src/arch/alpha/isa/decoder.isa:
src/arch/alpha/isa/main.isa:
src/arch/alpha/linux/process.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/linux/system.hh:
src/arch/alpha/linux/threadinfo.hh:
src/arch/alpha/process.cc:
src/arch/alpha/regfile.hh:
src/arch/alpha/stacktrace.cc:
src/arch/alpha/stacktrace.hh:
src/arch/alpha/tlb.cc:
src/arch/alpha/tlb.hh:
src/arch/alpha/tru64/process.cc:
src/arch/alpha/tru64/system.cc:
src/arch/alpha/tru64/system.hh:
src/arch/alpha/utility.hh:
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
src/arch/mips/isa_traits.cc:
src/arch/mips/isa_traits.hh:
src/arch/mips/linux/process.cc:
src/arch/mips/process.cc:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/arch/mips/regfile/regfile.hh:
src/arch/mips/stacktrace.hh:
src/arch/sparc/faults.cc:
src/arch/sparc/faults.hh:
src/arch/sparc/isa_traits.hh:
src/arch/sparc/linux/process.cc:
src/arch/sparc/linux/process.hh:
src/arch/sparc/process.cc:
src/arch/sparc/regfile.hh:
src/arch/sparc/solaris/process.cc:
src/arch/sparc/stacktrace.hh:
src/arch/sparc/ua2005.cc:
src/arch/sparc/utility.hh:
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
src/base/remote_gdb.cc:
src/base/remote_gdb.hh:
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.cc:
src/cpu/checker/cpu.hh:
src/cpu/checker/exec_context.hh:
src/cpu/cpu_exec_context.cc:
src/cpu/cpu_exec_context.hh:
src/cpu/cpuevent.cc:
src/cpu/cpuevent.hh:
src/cpu/exetrace.hh:
src/cpu/intr_control.cc:
src/cpu/memtest/memtest.hh:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/back_end.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/inorder_back_end.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/pc_event.cc:
src/cpu/pc_event.hh:
src/cpu/profile.cc:
src/cpu/profile.hh:
src/cpu/quiesce_event.cc:
src/cpu/quiesce_event.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/static_inst.cc:
src/cpu/static_inst.hh:
src/cpu/thread_state.hh:
src/dev/alpha_console.cc:
src/dev/ns_gige.cc:
src/dev/sinic.cc:
src/dev/tsunami_cchip.cc:
src/kern/kernel_stats.cc:
src/kern/kernel_stats.hh:
src/kern/linux/events.cc:
src/kern/linux/events.hh:
src/kern/system_events.cc:
src/kern/system_events.hh:
src/kern/tru64/dump_mbuf.cc:
src/kern/tru64/tru64.hh:
src/kern/tru64/tru64_events.cc:
src/kern/tru64/tru64_events.hh:
src/mem/vport.cc:
src/mem/vport.hh:
src/sim/faults.cc:
src/sim/faults.hh:
src/sim/process.cc:
src/sim/process.hh:
src/sim/pseudo_inst.cc:
src/sim/pseudo_inst.hh:
src/sim/syscall_emul.cc:
src/sim/syscall_emul.hh:
src/sim/system.cc:
src/cpu/thread_context.hh:
src/sim/system.hh:
src/sim/vptr.hh:
Change ExecContext to ThreadContext.
--HG--
rename : src/cpu/exec_context.hh => src/cpu/thread_context.hh
extra : convert_revision : 108bb97d15a114a565a2a6a23faa554f4e2fd77e
|
|
--HG--
extra : convert_revision : 77f475b156d81c03a2811818fa23593d5615c685
|
|
the object and places itself on a global list so
so the events can be migrated on cpu switches.
Create a new wrapper classe called CpuEventWrapper that works like the old wrapper class but calls the function with the xc
parameter
Use new CpuEventWrapper class from tick compare events on sparc
src/arch/sparc/regfile.hh:
Use new CpuEventWrapper class from tick compare events
src/arch/sparc/ua2005.cc:
Move definition to to a fullsystem only file, since it is.
src/cpu/base.cc:
On switch from one cpu to another CpuEvent::replaceExecContext() needs to be called on all (oldxc,newxc) pairs.
--HG--
extra : convert_revision : eecf4540427cc0ddf75e19a3371cf32b56cba0f5
|
|
setup all initialization stuff for UA2005
Setup fullsys build options
Start to make fullsystem compile
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
RCS to BitKeeper
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add support for doing virtual to physical translation using the in-memory
page table
src/arch/sparc/vtophys.cc:
a tad bit of error checking
src/arch/sparc/vtophys.hh:
Cleanup of full-system global variables, primarily in simple_cpu.cc,
to allow multi-system simulations. (Multiple systems not yet yested
though.) Also changes to build sim_smt in full-system mode (though
with only SimpleCPU and not the full timing CPU for now).
Still to do: minimize changes in SimpleCPU code between full-system
and application modes... way too many ifdefs there. Much of the
full-system stuff moved into SimpleCPU should be put in a new System
object to allow multiprocessor simulations.
Converted last remaining modules from C to C++ (mostly in /old).
Renamed all .c files to .cc and a few .h files to .hh.
Renamed architecture-specific files in arch/$TARGET from
$TARGET.{cc,hh,def} to machine.{cc,hh,def} to get rid of pointless
intermediate files in object directory. Split exo-specific
definitions out of machine.hh into machine_exo.h.
Specifics:
In machine.def, null resource descriptors must be FUClamd_NA (and not
NA) to pass C++ type checking.
Enhanced error checking/reporting in bas
src/arch/sparc/vtophys.cc:
- Get rid of my String class, the Vector class, the bitvector class, and my
doubly linked list class.
- Convert tokenize, to_number (formerly StringToNumber) and eat_white to
function on stl strings.
- Change most cases of char * and const char * to string, or const string &
- Some formatting and style nits, but not too many.
src/arch/sparc/vtophys.cc:
simplify
src/arch/sparc/vtophys.cc:
Renamed SimpleCPU::(read|write)_(byte|half|word|qword) to just read &
write, overloaded on the type of the 'data' argument. Merged the
full-system and non-full-system implementations of these eight
original functions into two common template functions.
To support this, also renamed (read|write)[1248] on memory_object and
derivatives to just read & write, again overloaded on the type of the
'data' argument. Many of these functions could now be condensed into
a few template functions (though with a level of indirection so that
the interface can remain virtual). I did not do that though.
src/arch/sparc/vtophys.cc:
First pass at compiling with gcc 3.x. Lots of "std::" in header files,
"using namespace std" in source files. (Note policy of not putting "using"
statements in headers or before includes in sources.)
Still not able to compile with gcc 3.2.
Errors:
- Can't create an ifstream from a file descriptor anymore (breaks IniFile).
- "`class MSHR::MSHRegister' is private" errors in mshr.cc and prefetch_cache.cc:
not clear why since it's in the public part of the class declaration.
- cpu.cc:879: can't match a reference and 0 (specifically "no match for `bool ?
SimObjectParam<PipeTrace*>& : int' operator")
- pipetrace.cc: "invalid conversion from `int' to `std::_Ios_Fmtflags'"
Warnings:
- strstream now deprecated... needs some rewriting in sat_counter.hh
and hybrid_pred.hh (need to get all that code out of the headers anyway)
- trace.hh macro problem: cpp now says 'pasting "::" and "Event" does not
give a valid preprocessing token'
- major "implicit typename" issues in base/sized.hh
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Implement some interval statistics for full system mode.
Create a callpal function that is called when a callpal occurs so it's easier
to manipulate the statics.
Rework the vtophys stuff to make it a bit cleaner.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Get rid of almost all old-style object names. This commit is equivalent
to running the following script on the current head:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' \) -exec perl -pi -e '\
s/\bmemory_object\b(?!\.hh)/FunctionalMemory/g;\
s/\bvirtual_memory\b(?!\.hh)/VirtualMemory/g;\
s/\bmain_memory\b(?!\.hh)/MainMemory/g;\
s/\bphysical_memory\b(?!\.hh)/PhysicalMemory/g;\
s/\bspec_memory\b(?!\.hh)/SpeculativeMemory/g;\
s/\bMemObj\b(?!\.hh)/TimingMemObj/g;\
s/\bmemory_translation\b(?!\.hh)/AddressTranslator/g;\
s/\balpha_tlb\b(?!\.hh)/AlphaTlb/g;\
s/\balpha_itb\b(?!\.hh)/AlphaItb/g;\
s/\balpha_dtb\b(?!\.hh)/AlphaDtb/g;\
s/\bmemory_controller\b(?!\.hh)/MemoryController/g;\
s/\bstorebuffer_t\b(?!\.hh)/StoreBuffer/g;\
s/\bstorebuffer_entry_t\b(?!\.hh)/StoreBufferEntry/g;\
s/\bcreate_vector_t\b(?!\.hh)/CreateVector/g;\
s/\bcv_spec_state\b(?!\.hh)/CreateVecSpecState/g;\
s/\bspec_state_list\b(?!\.hh)/SpecStateList/g;\
s/\bdyn_inst_t\b(?!\.hh)/DynInst/g;' {} \;
src/arch/sparc/vtophys.cc:
since cprintf properly deals with 64-bit types, stop using FMT* as much as
possible
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Change byte_t etc. to C99 standard int8_t etc.
Other than old/host.h, all other changes were produced by this script:
#! /bin/sh
find \( -name '*.cc' -o -name '*.hh' -o -name '*.c' -o -name '*.h' -o -name 'machine.def' \) -exec perl -pi -e '\
s/\bbyte_t\b(?!\.hh)/uint8_t/g;\
s/\bsbyte_t\b(?!\.hh)/int8_t/g;\
s/\bhalf_t\b(?!\.hh)/uint16_t/g;\
s/\bshalf_t\b(?!\.hh)/int16_t/g;\
s/\bword_t\b(?!\.hh)/uint32_t/g;\
s/\bsword_t\b(?!\.hh)/int32_t/g;\
s/\bqword_t\b(?!\.hh)/uint64_t/g;\
s/\bsqword_t\b(?!\.hh)/int64_t/g;\
s/\bbool_t\b(?!\.hh)/bool/g;\
s/\bdfloat_t\b(?!\.hh)/double/g;\
s/\bsfloat_t\b(?!\.hh)/float/g;' {} \;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add CVS Id tags
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Massive renaming to (almost) eliminate all md_* and MD_* names
in preparation for total exorcism of machine.def.
Most of the changes in this commit were performed with the
following perl script (perl -pi <script> <files>). A small
amount of manual fixup was needed to (mostly getting rid of
the Addr typedefs in the various memory objects now that
the former md_addr_t has that name).
# rename machine-dependent types and constants (will be moving into ISA traits object)
s/md_addr_t/Addr/g;
s/md_intreg_t/IntReg/g;
s/md_gpr_t/IntRegFile/g;
s/md_fpreg_t/FloatReg/g;
s/md_fpr_t/FloatRegFile/g;
s/md_ctrlreg_t/MiscReg/g;
s/md_ctrl_t/MiscRegFile/g;
s/md_ipr_t/InternalProcReg/g;
s/md_anyreg_t/AnyReg/g;
s/md_inst_t/MachInst/g;
s/regs_t/RegFile/g;
# manually fix declaration in old/regs.h and a few forward decls
s/struct RegFile/RegFile/g;
s/MD_NUM_IREGS/NumIntRegs/g;
s/MD_NUM_FREGS/NumFloatRegs/g;
s/MD_NUM_CREGS/NumMiscRegs/g;
s/MD_IPR_NUM/NumInternalProcRegs/g;
s/MD_TOTAL_REGS/TotalNumRegs/g;
s/MD_REG_ZERO/ZeroReg/g;
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
New ISA description system. No more machine.def!
Instructions are now decoded into StaticInst objects, and all static
instruction properties (including execution behavior) are associated
with those objects. Extended documentation in progress.
Currently supports Alpha only; PISA will not compile.
Use END_OF_MACHINE_DOT_DEF tag to extract previous version.
src/arch/sparc/vtophys.cc:
get rid of MD_IPR_foo and call it IPR_foo
add some comments to describe what the various PALtemp registers do
formatting
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
license
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
a little style
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Add attribution to license.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Make include paths explicit.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
CopyData and CopyString moved from kernel.cc to vtophys.cc
kernel.cc and kernel.hh moved to kern/tru64
src/arch/sparc/vtophys.hh:
Include isa_traits.hh for Addr
src/arch/sparc/vtophys.cc:
formatting fixes
src/arch/sparc/vtophys.cc:
fix up vtophys to deal with translations if there
is no ptbr, and to deal with PAL addresses
add ptomem which is just a wrapper for dma_addr
src/arch/sparc/vtophys.hh:
add ptomem which is a wrapper for dma_addr with the
same usage as vtomem
src/arch/sparc/vtophys.cc:
Fix to remote debugger while in PAL code
src/arch/sparc/vtophys.cc:
Remote an old hack that is now unnecessary
src/arch/sparc/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Updated Copyright
src/arch/sparc/vtophys.cc:
added back some code andrew removed and couldn't remember why.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
rename CopyData to CopyOut and implement CopyIn to copy data
from the simulator into the simulatee
src/arch/sparc/vtophys.cc:
fixed a bad merge from linux<->tru64
src/arch/sparc/vtophys.cc:
Check max address pal can be at so we don't do the wrong conversion
if gdb asks for an unaligned access.
src/arch/sparc/vtophys.cc:
PGOFSET -> ALPHA_PGOFSET to avoid include file problems
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
in the arch/alpha directory we should use arch/alpha, not
targetarch. sort includes while we're here.
src/arch/sparc/vtophys.cc:
use new constants, functions and structs to clean up the
vtophys code.
src/arch/sparc/vtophys.hh:
Clean up a little bit and make the protypes match new changes.
src/arch/sparc/vtophys.cc:
deal with isa addition
src/arch/sparc/vtophys.cc:
shuffle files around for new directory structure
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Remove RCS Id string
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
Update copyright dates and author list
src/arch/sparc/vtophys.cc:
Added a using directive for AlphaISA
src/arch/sparc/vtophys.hh:
Added the AlphaISA namespace specifier where needed
src/arch/sparc/vtophys.hh:
Made Addr a global type
src/arch/sparc/vtophys.cc:
Change access to the IPR to go through the XC.
src/arch/sparc/vtophys.cc:
Avoid directly accessing objects within the XC.
src/arch/sparc/vtophys.cc:
src/arch/sparc/vtophys.hh:
fixed for new memory system
put in namespace AlphaISA
src/arch/alpha/vtophys.cc:
src/arch/alpha/vtophys.hh:
Remove authors from copyright.
src/arch/sparc/vtophys.cc:
bk cp alpha/vtophys.cc sparc/vtophys.cc
src/arch/sparc/vtophys.hh:
bk cp alpha/vtophys.hh sparc/vtophys.hh
src/arch/sparc/SConscript:
remove fullsystem files that don't exist
src/arch/sparc/isa_traits.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
src/arch/sparc/regfile.hh:
split off fullsystem and se iprs into two functions to remove lots of #ifs
setup all initialization stuff for UA2005
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
Add system level tick storage to make stick be syncronized across multiple processors
src/arch/sparc/vtophys.hh:
start to create a vtophys for Sparc
src/base/loader/symtab.hh:
Addr is defined in sim/host.hh
--HG--
extra : convert_revision : ae4658e6bc2e2b51d7fb1c711d069ffe99e1377d
|