summaryrefslogtreecommitdiff
path: root/src/arch/x86/utility.cc
AgeCommit message (Collapse)Author
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-21Clock: Move the clock and related functions to ClockedObjectAndreas Hansson
This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2011-10-30X86: Get rid of more uses of FULL_SYSTEM.Gabe Black
2011-07-11X86: implements copyRegs() functionNilay Vaish
This patch implements the copyRegs() function for the x86 architecture. The patch assumes that no side effects other than TLB invalidation need to be considered while copying the registers. This may not hold true in future.
2011-01-03Make commenting on close namespace brackets consistent.Steve Reinhardt
Ran all the source files through 'perl -pi' with this script: s|\s*(};?\s*)?/\*\s*(end\s*)?namespace\s*(\S+)\s*\*/(\s*})?|} // namespace $3|; s|\s*};?\s*//\s*(end\s*)?namespace\s*(\S+)\s*|} // namespace $2\n|; s|\s*};?\s*//\s*(\S+)\s*namespace\s*|} // namespace $1\n|; Also did a little manual editing on some of the arch/*/isa_traits.hh files and src/SConscript.
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-10-15GetArgument: Rework getArgument so that X86_FS compiles again.Gabe Black
When no size is specified for an argument, push the decision about what size to use into the ISA by passing a size of -1.
2010-10-01Debug: Implement getArgument() and function skipping for ARM.Ali Saidi
In the process make add skipFuction() to handle isa specific function skipping instead of ifdefs and other ugliness. For almost all ABIs, 64 bit arguments can only start in even registers. Size is now passed to getArgument() so that 32 bit systems can make decisions about register selection for 64 bit arguments. The number argument is now passed by reference because getArgument() will need to change it based on the size of the argument and the current argument number. For ARM, if the argument number is odd and a 64-bit register is requested the number must first be incremented to because all 64 bit arguments are passed in an even argument register. Then the number will be incremented again to access both halves of the argument.
2010-08-23X86: Create a directory for files that define register indexes.Gabe Black
This is to help tidy up arch/x86. These files should not be used external to the ISA. --HG-- rename : src/arch/x86/apicregs.hh => src/arch/x86/regs/apic.hh rename : src/arch/x86/floatregs.hh => src/arch/x86/regs/float.hh rename : src/arch/x86/intregs.hh => src/arch/x86/regs/int.hh rename : src/arch/x86/miscregs.hh => src/arch/x86/regs/misc.hh rename : src/arch/x86/segmentregs.hh => src/arch/x86/regs/segment.hh
2010-05-23copyright: Change HP copyright on x86 code to be more friendlyNathan Binkert
2009-07-08Registers: Add a registers.hh file as an ISA switched header.Gabe Black
This file is for register indices, Num* constants, and register types. copyRegs and copyMiscRegs were moved to utility.hh and utility.cc. --HG-- rename : src/arch/alpha/regfile.hh => src/arch/alpha/registers.hh rename : src/arch/arm/regfile.hh => src/arch/arm/registers.hh rename : src/arch/mips/regfile.hh => src/arch/mips/registers.hh rename : src/arch/sparc/regfile.hh => src/arch/sparc/registers.hh rename : src/arch/x86/regfile.hh => src/arch/x86/registers.hh
2009-04-19X86: Implement the INIT IPI.Gabe Black
2009-04-19X86: Condense the startupCPU code.Gabe Black
2008-10-12X86: Make the local APIC accessible through the memory system directly, and ↵Gabe Black
make the timer work.
2008-10-12Turn Interrupts objects into SimObjects. Also, move local APIC state into ↵Gabe Black
x86's Interrupts object.
2008-02-26X86: Put in initial implementation of the local APIC.Gabe Black
--HG-- extra : convert_revision : 1708a93d96b819e64ed456c75dbb5325ac8114a8
2007-12-01X86: Move startup code to the system object to initialize a Linux system.Gabe Black
--HG-- extra : convert_revision : a4796c79f41aa8b8f38bf2f628bee8f1b3af64be
2007-12-01X86: Reorganize segmentation and implement segment selector movs.Gabe Black
--HG-- extra : convert_revision : 553c3ffeda1f5312cf02493f602e7d4ba2fe66e8
2007-12-01X86: Separate the effective seg base and the "hidden" seg base.Gabe Black
--HG-- extra : convert_revision : 5fcb8d94dbab7a7d6fe797277a5856903c885ad4
2007-11-16X86: Fix 32 bit compilation.Gabe Black
--HG-- extra : convert_revision : d16d68731a8480080ec6b8da3ebda8567e115a30
2007-11-12X86: Implement the startupCPU function.Gabe Black
--HG-- extra : convert_revision : d2331a0e0bd14863e82004508558f657c5b900a2
2007-10-23X86: Fix X86_FS compilation.Gabe Black
--HG-- extra : convert_revision : 5f014337e33a9e1ebe4df4063335315539fff69e
2007-10-07X86: Make x86 initialize more state.Gabe Black
--HG-- extra : convert_revision : a55866efd339ae795da4072c070918bf419b07fa
2007-10-07X86: Make initCPU and startupCPU do something basic.Gabe Black
--HG-- extra : convert_revision : 1a04f4402f4f31e4e5cd482c7983d853fe117df5
2007-09-24X86: Get X86_FS to compile.Gabe Black
--HG-- extra : convert_revision : fb973bcf13648876d5691231845dd47a2be50f01