| Age | Commit message (Collapse) | Author |
|---|
|
With the hierarchical RegId there are a lot of functions that are
redundant now.
The idea behind the simplification is that instead of having the regId,
telling which kind of register read/write/rename/lookup/etc. and then
the function panic_if'ing if the regId is not of the appropriate type,
we provide an interface that decides what kind of register to read
depending on the register type of the given regId.
Change-Id: I7d52e9e21fc01205ae365d86921a4ceb67a57178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2702
|
|
Replace the unified register mapping with a structure associating
a class and an index. It is now much easier to know which class of
register the index is referring to. Also, when adding a new class
there is no need to modify existing ones.
Change-Id: I55b3ac80763702aa2cd3ed2cbff0a75ef7620373
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2700
|
|
Change-Id: Ie1df07b70776208fc3631a73d403024636fc05a9
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3749
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Change-Id: I912601b6f781a0bbedd06583c059589374f6d5c6
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3720
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joe.gross@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
GDB breaks if more bytes are sent than the transmitted registers
actually need. Therefore the GdbRegCache struct needs to be packed to
prevent padding at the end.
Change-Id: Ib2c14eb70becdac609eb4f475d5dddbd5bcc60da
Signed-off-by: Matthias Hille <matthiashille8@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/3020
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Remove redundant information from the ExtMachInst, hash the vex
information to ensure the decode cache works properly, print the vex info
when printing an ExtMachInst, consider the vex info when comparing two
ExtMachInsts, fold the info from the vex prefixes into existing settings,
remove redundant decode code, handle vex prefixes one byte at a time and
don't bother building up the entire prefix, and let instructions that care
about vex use it in their implementation, instead of developing an entire
parallel decode tree.
This also eliminates the error prone vex immediate decode table which was
incomplete and would result in an out of bounds access for incorrectly
encoded instructions or when the CPU was mispeculating, as it was (as far
as I can tell) redundant with the tables that already existed for two and
three byte opcodes. There were differences, but I think those may have
been mistakes based on the documentation I found.
Also, in 32 bit mode, the VEX prefixes might actually be LDS or LES
instructions which are still legal in that mode. A valid VEX prefix would
look like an LDS/LES with an otherwise invalid modrm encoding, so use that
as a signal to abort processing the VEX and turn the instruction into an
LES/LDS as appropriate.
Change-Id: Icb367eaaa35590692df1c98862f315da4c139f5c
Reviewed-on: https://gem5-review.googlesource.com/3501
Reviewed-by: Joe Gross <joe.gross@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When the LiveProcess class was renamed to be just Process, the CL author
also changed the syscall function from a virtual function into a regular
one. Unfortunately, the I386Process class overrode the syscall function
to adjust the return address so that control would return to the right
place. Without that adjustment, 32 bit x86 process would segfault and die
immediately after their first system call.
This change reinstates the virtual specifier on the base syscall function,
and adds an override keyword on the I386Process's version so that it won't
be orphaned again in the future. It also fixes some small style issues the
style checker script complained about.
Change-Id: I0d1178ea0eda6676050c8fc043820a2bb4d99c0d
Reviewed-on: https://gem5-review.googlesource.com/3500
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.
Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the operands were 64 bit, an intermediate calculation could lose a
carry bit. This change rearranges that intermediate calculation if the
operand width is large, and reworks the microop implementation in general
in an attempt to make it easier to understand.
Change-Id: Ib36333f3f2695a33cd9623e43682de22ebd2e7ea
Reviewed-on: https://gem5-review.googlesource.com/3381
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When a branch micro-op belongs to a flow and the micro-op does not change
the nPC and just updates the nuPC (like a 'rep movs' flow), branching()
function always returns not-taken no matter actual micro-branch outcome.
Provided fix adds to the equation nuPC attribute checking since these kind
of branch micro-op only updates that pointer.
This issue has been found while debugging the performance of a copy-loop
implemented with memcopy function. Without the fix, 'rep movss' internal
micro-branch was always predicted as not-taken causing an squash event
after every branch micro-branch execution.
Using the provided test, branch mispredition went from 1922 without the fix
to 7.
Change-Id: I1bcbefae26aef47e3135817ef99b53d0ea0a98fa
|
|
This changeset sets the implementation policy for a subset of
system calls to the ignoreFunc implementation (for x86 only).
The ignored system calls likely will never be implemented and
this allows a warning to be issued instead of the simulation
exiting with a fatal.
Change-Id: I8d9741ad683151e88cc71156d3602e2d0ccb0acf
Reviewed-on: https://gem5-review.googlesource.com/2270
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This changeset adds support to kill a thread group by calling
the tgkill system call. The functionality is needed in some
pthread applications.
Change-Id: I0413a3331be69b74dfab30de95384113ec4efb63
Reviewed-on: https://gem5-review.googlesource.com/2268
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
|
|
This changeset extends the pipe system call to work with
architectures other than Alpha (and enables the syscall for
x86). For the dup system call, it sets the clone-on-exec
flag by default. For the dup2 system call, the changeset
adds an implementation (and enables it for x86).
Change-Id: I00ddb416744ee7dd61a5cd02c4c3d97f30543878
Reviewed-on: https://gem5-review.googlesource.com/2266
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
|
|
This changeset adds refactors the existing open system call,
adds the openat variant (enabled for x86 builds), and adds
additional "special file" test cases for /proc/meminfo and
/etc/passwd.
Change-Id: I6f429db65bbf2a28ffa3fd12df518c2d0de49663
Reviewed-on: https://gem5-review.googlesource.com/2265
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
|
|
This changeset fixes line alignment issues, spacing, spelling,
etc. for files that are used during SE Mode.
Change-Id: Ie61b8d0eb4ebb5af554d72f1297808027833616e
Reviewed-on: https://gem5-review.googlesource.com/2264
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
|
|
The Process class is full of implementation details and
structures related to SE Mode. This changeset factors out an
internal class from Process and moves it into a separate file.
The purpose behind doing this is to clean up the code and make
it a bit more modular.
Change-Id: Ic6941a1657751e8d51d5b6b1dcc04f1195884280
Reviewed-on: https://gem5-review.googlesource.com/2263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
simulations
Modifies the clone system call and adds execve system call. Requires allowing
processes to steal thread contexts from other processes in the same system
object and the ability to detach pieces of process state (such as MemState)
to allow dynamic sharing.
|
|
This changeset add fields to the process object and adds the following
three system calls: setpgid, gettid, getpid.
|
|
|
|
This changeset adds functionality that allows system calls to retry without
affecting thread context state such as the program counter or register values
for the associated thread context (when system calls return with a retry
fault).
This functionality is needed to solve problems with blocking system calls
in multi-process or multi-threaded simulations where information is passed
between processes/threads. Blocking system calls can cause deadlock because
the simulator itself is single threaded. There is only a single thread
servicing the event queue which can cause deadlock if the thread hits a
blocking system call instruction.
To illustrate the problem, consider two processes using the producer/consumer
sharing model. The processes can use file descriptors and the read and write
calls to pass information to one another. If the consumer calls the blocking
read system call before the producer has produced anything, the call will
block the event queue (while executing the system call instruction) and
deadlock the simulation.
The solution implemented in this changeset is to recognize that the system
calls will block and then generate a special retry fault. The fault will
be sent back up through the function call chain until it is exposed to the
cpu model's pipeline where the fault becomes visible. The fault will trigger
the cpu model to replay the instruction at a future tick where the call has
a chance to succeed without actually going into a blocking state.
In subsequent patches, we recognize that a syscall will block by calling a
non-blocking poll (from inside the system call implementation) and checking
for events. When events show up during the poll, it signifies that the call
would not have blocked and the syscall is allowed to proceed (calling an
underlying host system call if necessary). If no events are returned from the
poll, we generate the fault and try the instruction for the thread context
at a distant tick. Note that retrying every tick is not efficient.
As an aside, the simulator has some multi-threading support for the event
queue, but it is not used by default and needs work. Even if the event queue
was completely multi-threaded, meaning that there is a hardware thread on
the host servicing a single simulator thread contexts with a 1:1 mapping
between them, it's still possible to run into deadlock due to the event queue
barriers on quantum boundaries. The solution of replaying at a later tick
is the simplest solution and solves the problem generally.
|
|
This changeset adds the ability to set a close-on-exec flag for a given
file descriptor. It also reworks some of the logic surrounding setting and
retrieving flags from the file description.
|
|
|
|
|
|
Moves aux_vector into its own .hh and .cc files just to get it out of the
already crowded Process files. Arguably, it could stay there, but it's
probably better just to move it and give it files.
The changeset looks ugly around the Process header file, but the goal here is
to move methods and members around so that they're not defined randomly
throughout the entire header file. I expect this is likely one of the reasons
why I several unused variables related to this class. So, the methods are
declared first followed by members. I've tried to aggregate them together
so that similar entries reside near one another.
There are other changes coming to this code so this is by no means the
final product.
|
|
The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
|
|
When in 64-bit mode, if the stack is accessed implicitly by an instruction
the alternate address prefix should be ignored if present.
This patch adds an extra flag to the ldstop which signifies when the
address override should be ignored. Then, for all of the affected
instructions, this patch adds two options to the ld and st opcode to use
the current stack addressing mode for all addresses and to ignore the
AddressSizeFlagBit. Finally, this patch updates the x86 TLB to not
truncate the address if it is in 64-bit mode and the IgnoreAddrSizeFlagBit
is set.
This fixes a problem when calling __libc_start_main with a binary that is
linked with a recent version of ld. This version of ld uses the address
override prefix (0x67) on the call instruction instead of a nop.
Note: This has not been tested in compatibility mode and only the call
instruction with the address override prefix has been tested.
See [1] page 9 (pdf page 45)
For instructions that are affected see [1] page 519 (pdf page 555).
[1] http://support.amd.com/TechDocs/24594.pdf
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.
|
|
The class was crammed into syscall_emul.hh which has tons of forward
declarations and template definitions. To clean it up a bit, moved the
class into separate files and commented the class with doxygen style
comments. Also, provided some encapsulation by adding some accessors and
a mutator.
The syscallreturn.hh file was renamed syscall_return.hh to make it consistent
with other similarly named files in the src/sim directory.
The DPRINTF_SYSCALL macro was moved into its own header file with the
include the Base and Verbose flags as well.
--HG--
rename : src/sim/syscallreturn.hh => src/sim/syscall_return.hh
|
|
|
|
|
|
|
|
UBSAN flags this operation because it detects that arg is being cast directly
to an unsigned type, argBits. this patch fixes this by first casting the
value to a signed int type, then reintrepreting the raw bits of the signed
int into argBits.
|
|
|
|
fixes to appease clang++. tested on:
Ubuntu clang version 3.5.0-4ubuntu2~trusty2
(tags/RELEASE_350/final) (based on LLVM 3.5.0)
Ubuntu clang version 3.6.0-2ubuntu1~trusty1
(tags/RELEASE_360/final) (based on LLVM 3.6.0)
the fixes address the following five issues:
1) the exec continuations in gpu_static_inst.hh were marked
as protected when they should be public. here we mark
them as public
2) the Abs instruction uses std::abs() in its execute method.
because Abs is templated, it can also operate on U32 and U64,
types, which cause Abs::execute() to pass uint32_t and uint64_t
types to std::abs() respectively. this triggers a warning
because std::abs() has no effect in this case. to rememdy this
we add template specialization for the execute() method of Abs
when its template paramter is U32 or U64.
3) Some potocols that utilize the code in cprintf.hh were missing
includes to BoolVec.hh, which defines operator<< for the BoolVec
type. This would cause issues when the generated code would try
to pass a BoolVec type to a method in cprintf.hh that used
operator<< on an instance of a BoolVec.
4) Surprise, clang doesn't like it when you clobber all the bits
in a newly allocated object. I.e., this code:
tlb = new GpuTlbEntry\[size\];
std::memset(tlb, 0, sizeof(GpuTlbEntry) \* size);
Let's use std::vector to track the TLB entries in the GpuTlb now...
5) There were a few variables used only in DPRINTFs, so we mark them
with M5_VAR_USED.
|
|
This patch adds the ability for an application to request dist-gem5 to begin/
end synchronization using an m5 op. When toggling on sync, all nodes agree
on the next sync point based on the maximum of all nodes' ticks. CPUs are
suspended until the sync point to avoid sending network messages until sync has
been enabled. Toggling off sync acts like a global execution barrier, where
all CPUs are disabled until every node reaches the toggle off point. This
avoids tricky situations such as one node hitting a toggle off followed by a
toggle on before the other nodes hit the first toggle off.
|
|
Adding details, e.g. rip, rsp etc. to the kvm pagefault exit when in SE mode.
|
|
Normal MMAPPED_IPR requests are allowed to execute speculatively under the
assumption that they have no side effects. The special case of m5ops that are
treated like MMAPPED_IPR should not be allowed to execute speculatively, since
they can have side-effects. Adding the STRICT_ORDER flag to these requests
blocks execution until the associated instruction hits the ROB head.
|
|
Change-Id: I183b9942929c873c3272ce6d1abd4ebc472c7132
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
this patch fixes issues with changeset 11593
use the host's pwrite() syscall for pwrite64Func(),
as opposed to pwrite64(), because pwrite64() does
not work well on all distros.
undo the enabling of fstatfs, as we will add this
in a separate pate.
|
|
this patch adds an implementation for the pwrite64 syscall and
enables it for x86_64, and enables fstatfs for x86_64.
|
|
According to the Intel Multi Processor Specification rev 1.4 (-006) (*),
section 4.3.2 Bus Entries, Bus type strings are >>6-character ASCII
(blank-filled) strings<<.
This patch properly pads the entries with the missing spaces at the end.
(*) http://www.intel.com/design/pentium/datashts/24201606.pdf
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
Registers are 0x10 and not 0x8 apart. The latter leads to invalid
calculations of index in array which in turn means that we will not
find the interrupt we were looking (been notified) for in the OS.
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
After all this it turns out we don't even use it.
|
|
The openFlagTable and mmapFlagTables for emulated Linux
platforms are basically identical, but are specified
repetitively for every platform. Use a common file
that gets included for each platform so that we only
have one copy, making them more consistent and simplifying
changes (like adding #ifdefs).
In the process, made some minor fixes that slipped through
due to previous inconsistencies, and added more #ifdefs
to try to fix building on alternative hosts.
|
|
|
|
|
|
The mmapGrowsDown() method was a static method on the OperatingSystem
class (and derived classes), which worked OK for the templated syscall
emulation methods, but made it hard to access elsewhere. This patch
moves the method to be a virtual function on the LiveProcess method,
where it can be overridden for specific platforms (for now, Alpha).
This patch also changes the value of mmapGrowsDown() from being false
by default and true only on X86Linux32 to being true by default and
false only on Alpha, which seems closer to reality (though in reality
most people use ASLR and this doesn't really matter anymore).
In the process, also got rid of the unused mmap_start field on
LiveProcess and OperatingSystem mmapGrowsUp variable.
|
|
|
|
For O3, which has a stat that counts reg reads, there is an additional
reg read per mmap() call since there's an arg we no longer ignore.
Otherwise, stats should not be affected.
|
|
|
