summaryrefslogtreecommitdiff
path: root/src/arch/x86
AgeCommit message (Collapse)Author
2012-06-07X86 TLB: Add a missing = signNilay Vaish
2012-06-07X86 TLB: Fix for gcc 4.4.3Jayneel Gandhi
Due to recent changes to X86 TLB, gem5 stopped compiling on gcc version 4.4.3. This patch provides the fix for that problem. The patch is tested on gcc 4.4.3. The change is not required for more recent versions of gcc (like on 4.6.3).
2012-06-05ISA: Back-out NoopMachInst as a StaticInstPtr change.Ali Saidi
2012-06-05O3: Clean up the O3 structures and try to pack them a bit better.Ali Saidi
DynInst is extremely large the hope is that this re-organization will put the most used members close to each other.
2012-06-05sim: Remove FastAllocAli Saidi
While FastAlloc provides a small performance increase (~1.5%) over regular malloc it isn't thread safe. After removing FastAlloc and using tcmalloc I've seen a performance increase of 12% over libc malloc when running twolf for ARM.
2012-06-04ISA: Turn the ExtMachInst NoopMachinst into the StaticInstPtr NoopStaticInst.Gabe Black
This eliminates a use of the ExtMachInst type outside of the ISAs.
2012-06-04X86: Ensure that the CPUID instruction always writes its outputs.Gabe Black
The CPUID instruction was implemented so that it would only write its results if the instruction was successful. This works fine on the simple CPU where unwritten registers retain their old values, but on a CPU like O3 with renaming this is broken. The instruction needs to write the old values back into the registers explicitly if they aren't being changed.
2012-06-04X86: Ensure that the decoder's internal ExtMachInst is completely initialized.Gabe Black
There are some bits of some fields of the ExtMachInst which are not actually used for anything but are included in the hash of an ExtMachInst for simplicity and efficiency. This change makes sure the decoder's internal working ExtMachInst is completely initialized, even these unused bits, so that there isn't any nondeterministic behavior, no valgrind messages about uninitialized variables, and no potential false misses/redundant entries in the decode cache.
2012-05-28X86: Use the HandyM5Reg to avoid a register read and some logic in the TLB.Gabe Black
2012-05-27X86: Move the GDT down to where it can be accessed in 32 bit mode.Gabe Black
The GDT can be accessed by user level software running in compatibility mode by moving segment selectors into segment registers. The GDT needs to be set up at an address accessible in this mode.
2012-05-27X86: Truncate addresses to 32 bits except in 64 bit mode, not long mode.Gabe Black
A small change was added a while ago to keep addresses from overflowing 32 bits when larger addresses shouldn't be accessible to software. That change truncated when not in long mode, but really it should have truncated when not in 64 bit mode. The difference is whether compatibility mode is included, a mode that's supposed to act like a legacy 32 bit mode.
2012-05-26ISA,CPU: Generalize and split out the components of the decode cache.Gabe Black
This will allow it to be specialized by the ISAs. The existing caching scheme is provided by the BasicDecodeCache in the GenericISA namespace and is built from the generalized components. --HG-- rename : src/cpu/decode_cache.cc => src/arch/generic/decode_cache.cc
2012-05-26CPU: Merge the predecoder and decoder.Gabe Black
These classes are always used together, and merging them will give the ISAs more flexibility in how they cache things and manage the process. --HG-- rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-25ISA: Make the decode function part of the ISA's decoder.Gabe Black
2012-05-25Decode: Make the Decoder class defined per ISA.Gabe Black
--HG-- rename : src/cpu/decode.cc => src/arch/generic/decoder.cc rename : src/cpu/decode.hh => src/arch/generic/decoder.hh
2012-05-22X86: Split Condition Code registerNilay Vaish
This patch moves the ECF and EZF bits to individual registers (ecfBit and ezfBit) and the CF and OF bits to cfofFlag registers. This is being done so as to lower the read after write dependencies on the the condition code register. Ultimately we will have the following registers [ZAPS], [OF], [CF], [ECF], [EZF] and [DF]. Note that this is only one part of the solution for lowering the dependencies. The other part will check whether or not the condition code register needs to be actually read. This would be done through a separate patch.
2012-05-19x86 ISA: Implement the sse3 haddps instruction.Marc Orr
Shuffle the 32 bit values into position, and then add in parallel.
2012-05-01MEM: Separate requests and responses for timing accessesAndreas Hansson
This patch moves send/recvTiming and send/recvTimingSnoop from the Port base class to the MasterPort and SlavePort, and also splits them into separate member functions for requests and responses: send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq, send/recvTimingSnoopResp. A master port sends requests and receives responses, and also receives snoop requests and sends snoop responses. A slave port has the reciprocal behaviour as it receives requests and sends responses, and sends snoop requests and receives snoop responses. For all MemObjects that have only master ports or slave ports (but not both), e.g. a CPU, or a PIO device, this patch merely adds more clarity to what kind of access is taking place. For example, a CPU port used to call sendTiming, and will now call sendTimingReq. Similarly, a response previously came back through recvTiming, which is now recvTimingResp. For the modules that have both master and slave ports, e.g. the bus, the behaviour was previously relying on branches based on pkt->isRequest(), and this is now replaced with a direct call to the apprioriate member function depending on the type of access. Please note that send/recvRetry is still shared by all the timing accessors and remains in the Port base class for now (to maintain the current bus functionality and avoid changing the statistics of all regressions). The packet queue is split into a MasterPort and SlavePort version to facilitate the use of the new timing accessors. All uses of the PacketQueue are updated accordingly. With this patch, the type of packet (request or response) is now well defined for each type of access, and asserts on pkt->isRequest() and pkt->isResponse() are now moved to the appropriate send member functions. It is also worth noting that sendTimingSnoopReq no longer returns a boolean, as the semantics do not alow snoop requests to be rejected or stalled. All these assumptions are now excplicitly part of the port interface itself.
2012-04-29X86: Fix the IMUL_R_P_I macroop.Gabe Black
The disp displacement was left off the load microop so the wrong value was used.
2012-04-29X86: Fix up the open system call's flags.Vince Weaver
2012-04-29X86: Make gem5 ignore a bunch of syscalls.Vince Weaver
2012-04-24X86: Clear out duplicate TLB entries when adding a new one.Gabe Black
It's possible for two page table walks to overlap which will go in the same place in the TLB's trie. They would land on top of each other, so this change adds some code which detects if an address already matches an entry and if so throws away the new one.
2012-04-23ISA: Put parser generated files in a "generated" directory.Gabe Black
This is to avoid collision with non-generated files.
2012-04-21X86: Report an error if there's no kernel object, don't blindly use it.Gabe Black
This way the user gets a nice message instead of a less nice segfault.
2012-04-15X86: Fix a tiny typo in the load/store microop constructor.Gabe Black
The parameter is _machInst, which is very similar to the member machInst. If machInst is used to pass the parameter to a lower level constructor, what really happens is that machInst is set to whatever it already happened to be, effectively leaving it uninitialized.
2012-04-14X86: Use the AddrTrie class to implement the TLB.Gabe Black
This change also adjusts the TlbEntry class so that it stores the number of address bits wide a page is rather than its size in bytes. In other words, instead of storing 4K for a 4K page, it stores 12. 12 is easy to turn into 4K, but it's a little harder going the other way.
2012-04-14MEM: Remove the Broadcast destination from the packetAndreas Hansson
This patch simplifies the packet by removing the broadcast flag and instead more firmly relying on (and enforcing) the semantics of transactions in the classic memory system, i.e. request packets are routed from a master to a slave based on the address, and when they are created they have neither a valid source, nor destination. On their way to the slave, the request packet is updated with a source field for all modules that multiplex packets from multiple master (e.g. a bus). When a request packet is turned into a response packet (at the final slave), it moves the potentially populated source field to the destination field, and the response packet is routed through any multiplexing components back to the master based on the destination field. Modules that connect multiplexing components, such as caches and bridges store any existing source and destination field in the sender state as a stack (just as before). The packet constructor is simplified in that there is no longer a need to pass the Packet::Broadcast as the destination (this was always the case for the classic memory system). In the case of Ruby, rather than using the parameter to the constructor we now rely on setDest, as there is already another three-argument constructor in the packet class. In many places where the packet information was printed as part of DPRINTFs, request packets would be printed with a numeric "dest" that would always be -1 (Broadcast) and that field is now removed from the printing.
2012-04-14MEM: Separate snoops and normal memory requests/responsesAndreas Hansson
This patch introduces port access methods that separates snoop request/responses from normal memory request/responses. The differentiation is made for functional, atomic and timing accesses and builds on the introduction of master and slave ports. Before the introduction of this patch, the packets belonging to the different phases of the protocol (request -> [forwarded snoop request -> snoop response]* -> response) all use the same port access functions, even though the snoop packets flow in the opposite direction to the normal packet. That is, a coherent master sends normal request and receives responses, but receives snoop requests and sends snoop responses (vice versa for the slave). These two distinct phases now use different access functions, as described below. Starting with the functional access, a master sends a request to a slave through sendFunctional, and the request packet is turned into a response before the call returns. In a system without cache coherence, this is all that is needed from the functional interface. For the cache-coherent scenario, a slave also sends snoop requests to coherent masters through sendFunctionalSnoop, with responses returned within the same packet pointer. This is currently used by the bus and caches, and the LSQ of the O3 CPU. The send/recvFunctional and send/recvFunctionalSnoop are moved from the Port super class to the appropriate subclass. Atomic accesses follow the same flow as functional accesses, with request being sent from master to slave through sendAtomic. In the case of cache-coherent ports, a slave can send snoop requests to a master through sendAtomicSnoop. Just as for the functional access methods, the atomic send and receive member functions are moved to the appropriate subclasses. The timing access methods are different from the functional and atomic in that requests and responses are separated in time and send/recvTiming are used for both directions. Hence, a master uses sendTiming to send a request to a slave, and a slave uses sendTiming to send a response back to a master, at a later point in time. Snoop requests and responses travel in the opposite direction, similar to what happens in functional and atomic accesses. With the introduction of this patch, it is possible to determine the direction of packets in the bus, and no longer necessary to look for both a master and a slave port with the requested port id. In contrast to the normal recvFunctional, recvAtomic and recvTiming that are pure virtual functions, the recvFunctionalSnoop, recvAtomicSnoop and recvTimingSnoop have a default implementation that calls panic. This is to allow non-coherent master and slave ports to not implement these functions.
2012-04-14clang/gcc: Fix compilation issues with clang 3.0 and gcc 4.6Andreas Hansson
This patch addresses a number of minor issues that cause problems when compiling with clang >= 3.0 and gcc >= 4.6. Most importantly, it avoids using the deprecated ext/hash_map and instead uses unordered_map (and similarly so for the hash_set). To make use of the new STL containers, g++ and clang has to be invoked with "-std=c++0x", and this is now added for all gcc versions >= 4.6, and for clang >= 3.0. For gcc >= 4.3 and <= 4.5 and clang <= 3.0 we use the tr1 unordered_map to avoid the deprecation warning. The addition of c++0x in turn causes a few problems, as the compiler is more stringent and adds a number of new warnings. Below, the most important issues are enumerated: 1) the use of namespaces is more strict, e.g. for isnan, and all headers opening the entire namespace std are now fixed. 2) another other issue caused by the more stringent compiler is the narrowing of the embedded python, which used to be a char array, and is now unsigned char since there were values larger than 128. 3) a particularly odd issue that arose with the new c++0x behaviour is found in range.hh, where the operator< causes gcc to complain about the template type parsing (the "<" is interpreted as the beginning of a template argument), and the problem seems to be related to the begin/end members introduced for the range-type iteration, which is a new feature in c++11. As a minor update, this patch also fixes the build flags for the clang debug target that used to be shared with gcc and incorrectly use "-ggdb".
2012-03-31X86: Fix address size handling so real mode works properly.Gabe Black
Virtual (pre-segmentation) addresses are truncated based on address size, and any non-64 bit linear address is truncated to 32 bits. This means that real mode addresses aren't truncated down to 16 bits after their segment bases are added in.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-19gcc: Clean-up of non-C++0x compliant code, first stepsAndreas Hansson
This patch cleans up a number of minor issues aiming to get closer to compliance with the C++0x standard as interpreted by gcc and clang (compile with std=c++0x and -pedantic-errors). In particular, the patch cleans up enums where the last item was succeded by a comma, namespaces closed by a curcly brace followed by a semi-colon, and the use of the GNU-extension typeof (replaced by templated functions). It does not address variable-length arrays, zero-size arrays, anonymous structs, range expressions in switch statements, and the use of long long. The generated CPU code also has a large number of issues that remain to be fixed, mainly related to overflows in implicit constant conversion (due to shifts).
2012-03-19clang: Fix recently introduced clang compilation errorsAndreas Hansson
This patch makes the code compile with clang 2.9 and 3.0 again by making two very minor changes. Firt, it maintains a strict typing in the forward declaration of the BaseCPUParams. Second, it adds a FullSystemInt flag of the type unsigned int next to the boolean FullSystem flag. The FullSystemInt variable can be used in decode-statements (expands to switch statements) in the instruction decoder.
2012-03-09CheckerCPU: Add function stubs to non-ARM ISA source to compile with CheckerCPUGeoffrey Blake
Making the CheckerCPU a runtime time option requires the code to be compatible with ISAs other than ARM. This patch adds the appropriate function stubs to allow compilation.
2012-03-01x86: Fix x86 TLB and WalkerNilay Vaish
This patch adds a function to X86 tlb that returns the walker port. This port is required for correctly connecting the walker ports for the cpu just switched in
2012-02-26X86: Use the M5PanicFault fault in execute methods instead of calling panic.Gabe Black
If an instruction is executed speculatively and hits a situation where it wants to panic, it should return a fault instead. If the instruction was misspeculated, the fault can be thrown away. If the instruction wasn't misspeculated, the fault will be invoked and the panic will still happen.
2012-02-24MEM: Make port proxies use references rather than pointersAndreas Hansson
This patch is adding a clearer design intent to all objects that would not be complete without a port proxy by making the proxies members rathen than dynamically allocated. In essence, if NULL would not be a valid value for the proxy, then we avoid using a pointer to make this clear. The same approach is used for the methods using these proxies, such as loadSections, that now use references rather than pointers to better reflect the fact that NULL would not be an acceptable value (in fact the code would break and that is how this patch started out). Overall the concept of "using a reference to express unconditional composition where a NULL pointer is never valid" could be done on a much broader scale throughout the code base, but for now it is only done in the locations affected by the proxies.
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-12X86: open flags: Another patch from Vince WeaverGabe Black
2012-02-12mem: Add a master ID to each request object.Ali Saidi
This change adds a master id to each request object which can be used identify every device in the system that is capable of issuing a request. This is part of the way to removing the numCpus+1 stats in the cache and replacing them with the master ids. This is one of a series of changes that make way for the stats output to be changed to python.
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-29Implement Ali's review feedback.Gabe Black
Try to decrease indentation, and remove some redundant FullSystem checks.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-09X86: Add memory fence to I/O instructionsNilay Vaish
2012-01-07Another merge with the main repository.Gabe Black