summaryrefslogtreecommitdiff
path: root/src/arch/x86
AgeCommit message (Collapse)Author
2019-01-10sim-se: Refactor clone to avoid most ifdefsAndreas Sandberg
Some parts of clone are architecture dependent. In some cases, we are able to use architecture-specific helper functions or register aliases. However, there is still some architecture-specific that is protected by ifdefs in the common clone implementation. Move these architecture-specific bits to the architecture-specific OS class instead to avoid these ifdefs and make the code a bit more readable. Change-Id: Ia0903d738d0ba890863bddfa77e3b717db7f45de Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Cc: Giacomo Travaglini <giacomo.travaglini@arm.com> Cc: Javier Setoain <javier.setoain@arm.com> Cc: Brandon Potter <Brandon.Potter@amd.com> Reviewed-on: https://gem5-review.googlesource.com/c/15435 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-12-05arch-x86: Add sys/syscall.h to x86 process.cc/syscall_emul.ccTony Gutierrez
Change a66d12c guards the selection of getdents() in x86's process.cc file with SYS_getdents, however process.cc does not include the right header for SYS_getdents, which leads to x86 choosing the unimplemented call. This change adds sys/syscall.h to address the problem. This change also adds sys/syscall.hh to syscall_emu.cc, which only includes syscall.hh and may not be supported on all systems. Change-Id: If1adcf41e9e455de5f2827ba98c542fdcacdc22e Reviewed-on: https://gem5-review.googlesource.com/c/14775 Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-11-27sim-se: only implement getdentsFunc on supported hostsCiro Santilli
The implementation of the getdents syscall relies on SYS_getdents, which is not available on all archs, because the getdents syscall has been superseded by getdents64, and does not exist on newer archs such as aarch64. This leads the build to break on aarch64 hosts with error: error: 'SYS_getdents' was not declared in this scope Change-Id: I8701fb5b61c0418b14a9463ef135a391a7f7a9ba Reviewed-on: https://gem5-review.googlesource.com/c/14596 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-11-21x86: Get rid of a problematic DPRINTF in PremFp.Gabe Black
This DPRINTF shouldn't be necessary since it shows the operands and results of the instruction which the trace should already make available. Also by passing the destination register to DPRINTF, the ISA parser will assume that it's also a source when tracking dependencies. Change-Id: I820387c82578bdbb8d2e3d91652a6c0185077f54 Reviewed-on: https://gem5-review.googlesource.com/c/14475 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-10-17arch: Get rid of the unused type AnyReg.Gabe Black
This type is defined for all the ISAs but isn't used by anything. Change-Id: I659a0c5abc7883d82fedd1cac2cd103612d315c8 Reviewed-on: https://gem5-review.googlesource.com/c/13539 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-12x86: Use little endian packet accessors.Gabe Black
We know data is little endian, so we can use those accessors explicitly. Change-Id: I09aa7f1e525ad1346e932ce4a772b64bf59dc350 Reviewed-on: https://gem5-review.googlesource.com/c/13456 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-09-19syscall_emul: implement dir-related syscallsBrandon Potter
Add getdents, rmdir, chdir, and mknod to SE mode for x86. Change-Id: I387ea3066869e8999bc0064f74070f4e47c1e9a1 Reviewed-on: https://gem5-review.googlesource.com/12112 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-09-19syscall_emul: expand AuxVector classBrandon Potter
The AuxVector class is responsible for holding Process data. The data that it holds is normally setup by an OS kernel in the process address space. The purpose behind doing this is to pass in information that the process will need for various reasons. (Check out the enum in the header file for an idea of what the AuxVector holds.) The AuxVector struct was changed into a class and encapsulation methods were added to protect access to the member variables. The host ISA may have a different endianness than the simulated ISA. Since data is passed between the process address space and the simulator for auxiliary vectors, we need to worry about maintaining endianness for the right context. Change-Id: I32c5ac4b679559886e1efeb4b5483b92dfc94af9 Reviewed-on: https://gem5-review.googlesource.com/12109 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-08-21misc: Appease GCC 8Jason Lowe-Power
GCC 8 adds a number of new warnings to -Wall which generate errors. - Fix memset to 0 for structs by adding casts. - Fix cast with const when the const was ignored. - Fix catch a polymorphic type by value We now compile with GCC 8! Change-Id: Iab70ce11190eee67608fc25c0bedff170152b153 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/11949 Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2018-06-25syscall_emul: adding symlink system callMatt Sinclair
Change-Id: Iebda05c130b4d2ee8434cad1e703933bfda486c8 Reviewed-on: https://gem5-review.googlesource.com/11490 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-06-25syscall_emul: adding link system callMatt Sinclair
Change-Id: If8922c2233bbe1f6fce35f64d1a44b91d2cfeed2 Reviewed-on: https://gem5-review.googlesource.com/11489 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-06-11misc: Using smart pointers for memory RequestsGiacomo Travaglini
This patch is changing the underlying type for RequestPtr from Request* to shared_ptr<Request>. Having memory requests being managed by smart pointers will simplify the code; it will also prevent memory leakage and dangling pointers. Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/10996 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-05-24x86: Add op classes to the MediaOps.Gabe Black
The ISA parser had been assuming these microops were all FloatAddOp which is usually not correct. Change-Id: Ic54881d16f16b50c3d6a8c74b94bff9ae3b1f43e Reviewed-on: https://gem5-review.googlesource.com/10541 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Tariq Azmy <tariqslayer01@gmail.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-05-08arch-x86, arch-power: fix calls to bits and insertBitsMatt Sinclair
The bits and insertBits assume the first bit is the larger bit and the last bit is the smaller bit. This commit fixes several X86 and Power calls to these functions that incorrectly assumed that first was the smaller bit. Change-Id: I2b5354d1b9ca66e3436c4a72042416a6ce6dec01 Reviewed-on: https://gem5-review.googlesource.com/10241 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-05-03arch-x86: Enable fstatfs for x86_64Tony Gutierrez
Change-Id: Ic871f852c4892f2228f0d9bb3cc5cb66887d9736 Reviewed-on: https://gem5-review.googlesource.com/10201 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-05-02arch-x86: implement movntps/movntpd SSE instsSteve Reinhardt
These are non-temporal packed SSE stores. Change-Id: I526cd6551b38d6d35010bc6173f23d017106b466 Reviewed-on: https://gem5-review.googlesource.com/9861 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-05-02x86: Add a ld/st microop flag for marking an access uncacheable.Gabe Black
This percolates down to the memory request object which will have its "UNCACHEABLE" flag set. Change-Id: Ie73f4249bfcd57f45a473f220d0988856715a9ce Reviewed-on: https://gem5-review.googlesource.com/9881 Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
2018-05-02arch-x86: Enable the umask system callTony Gutierrez
Change-Id: I309beb1604657e8d1807ac90458709df57f0f819 Reviewed-on: https://gem5-review.googlesource.com/10161 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-04-27sim,cpu,mem,arch: Introduced MasterInfo data structureGiacomo Travaglini
With this patch a gem5 System will store more info about its Masters. While it was previously keeping track of the Master name and Master ID only, it is now adding a per-Master pointer to the SimObject related to the Master. This will make it possible for a client to query a System for a Master using either the master's name or the master's pointer. Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/9781 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-03-27arch: cpu: Make the ExtMachInst type a template argument in InstMap.Gabe Black
This doesn't completely hide the ISA specific ExtMachInst type inside the ISAs since it still gets applied in arch/generic, but it at least pulls it into the arch directory. Change-Id: Ic2188d59696530d7ecafdff0785d71867182701d Reviewed-on: https://gem5-review.googlesource.com/9403 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-15arch-x86,sim-se: Enable prlimit syscallJason Lowe-Power
Change-Id: I15f0e5ddb72578de90ed68866c8a0c1501717d61 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8921 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-03-15arch-x86,sim-se: Bump kernel version to 3.2Jason Lowe-Power
Current glibc expects at least kernel 3.2. Bump this so syscall emulation with dynamically-linked binaries works. Change-Id: I07077ed2de14c308f6ff79cae677915612557332 Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/8903 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Brandon Potter <Brandon.Potter@amd.com>
2018-03-15x86: Add bitfields which can gather/scatter bases and limits.Gabe Black
Add bitfields which can gather/scatter base and limit fields within "normal" segment descriptors, and in TSS descriptors which have the same bitfields in the same positions for those two values. This centralizes the code which manages those bitfields and makes it less likely that a local implementation will be buggy. Change-Id: I9809aa626fc31388595c3d3b225c25a0ec6a1275 Reviewed-on: https://gem5-review.googlesource.com/7661 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-14x86: Simplify the implementations of RDTSC and RDTSCP slightly.Gabe Black
These instructions originally read the TSC into t1 and then unpacked it into eax and edx using a move, a right shift, and then another move. We can combine the second shift and move. The shift will move the upper 32 bits into the lower 32 bits, and clear the upper 32 bits to zero. This has the same effect as moving the lower 32 bits post-shift into another register, since the upper 32 bits will be cleared to zero based on x86 partial register access semantics. Change-Id: Iba85e501c7e84147ad0047f5c555e61bdf8f032b Reviewed-on: https://gem5-review.googlesource.com/9044 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-14x86: Implement the RDTSCP instruction.Gabe Black
This is very similar to RDTSC, except that it requires all younger instructions to retire before it completes, and it writes the TSC_AUX MSR into ECX. I've added an mfence as an iniitial microop to ensure that memory accesses complete before RDTSCP runs, and added an rdval microop at the end to read the TSC_AUX value into ECX. Change-Id: I9766af562b7fd0c22e331b56e06e8818a9e268c9 Reviewed-on: https://gem5-review.googlesource.com/9043 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-14x86: Mark the RDTSC instruction as .serialize_before.Gabe Black
Change-Id: I20bf6a57ea4354aac9267845bb37b70b83d6fcde Reviewed-on: https://gem5-review.googlesource.com/9042 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-03-14x86: Replace the .serializing directive with .serialize_(before|after).Gabe Black
This makes it explicit which type of serialization you want, and also makes it possible to make a macroop serialize before. The old serializing directive was renamed .serialize_after in the microcode assembler, and throughout the microcode implementation, and its behavior is unchanged. More specifically, it still marks the last microop within the macroop as IsSerializing and IsSerializeAfter. The new .serialize_before directive does something similar and marks the first microop as IsSerializing and IsSerializeBefore. Change-Id: Ia53466c734c651c65400809de7ef903c4a6c3e7e Reviewed-on: https://gem5-review.googlesource.com/9041 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-31arch-x86: consistent style of comments in system filesChristian Menard
Change-Id: I9f208819b8c1a5c46a77262eb533bb47adb2b905 Reviewed-on: https://gem5-review.googlesource.com/7701 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-30arch-x86: Granularity bit and segment limitMaximilian Stein
If set, the granularity bit indicates that the segment limit of segment descriptors shall be interpreted as number of 4K blocks rather than bytes. The high part (bit 48 to 51) of segment descriptor limits is only 4 bits wide while the low part (bit 0 to 15) spans 16 bits. Change-Id: Ie386224ca815275fdb31498fe68310ed9c62cc87 Reviewed-on: https://gem5-review.googlesource.com/7601 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-23arch-x86: Adding clflush, clflushopt, clwb instructionsSwapnil Haria
This patch adds support for cache flushing instructions in x86. It piggybacks on support for similar instructions in arm ISA added by Nikos Nikoleris. I have tested each instruction using microbenchmarks. Change-Id: I72b6b8dc30c236a21eff7958fa231f0663532d7d Reviewed-on: https://gem5-review.googlesource.com/7401 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-23tarch, mem: Abstract the data stored in the SE page tables.Gabe Black
Rather than store the actual TLB entry that corresponds to a mapping, we can just store some abstracted information (address, a few flags) and then let the caller turn that into the appropriate entry. There could potentially be some small amount of overhead from creating entries vs. storing them and just installing them, but it's likely pretty minimal since that only happens on a TLB miss (ideally rare), and, if it is problematic, there could be some preallocated TLB entries which are just minimally filled in as necessary. This has the nice effect of finally making the page tables ISA agnostic. Change-Id: I11e630f60682f0a0029b0683eb8ff0135fbd4317 Reviewed-on: https://gem5-review.googlesource.com/7350 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-23x86, mem: Rewrite the multilevel page table class.Gabe Black
The new version extracts all the x86 specific aspects of the class, and builds the interface around a variable collection of template arguments which are classes that represent the different levels of the page table. The multilevel page table class is now much more ISA independent. Change-Id: Id42e168a78d0e70f80ab2438480cb6e00a3aa636 Reviewed-on: https://gem5-review.googlesource.com/7347 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20x86, mem: Don't try to force physical addresses on the system.Gabe Black
Use the system object to allocate physical memory instead of manually placing certain structures and then forcing the system to start other allocations after them in physical memory. Change-Id: Ie18c81645c3b648c64a6d7a649a0e50f7028f344 Reviewed-on: https://gem5-review.googlesource.com/7346 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-20x86, mem: Get rid of PageTableOps::getBasePtr.Gabe Black
Pass this constant into the page table constructor. Change-Id: Icbf730f18d9dfcfebd10a196f7f799514728b0fb Reviewed-on: https://gem5-review.googlesource.com/7345 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-20x86, mem: Pass the multi level page table layout in as a parameter.Gabe Black
Don't get it from a global constant declared in an ISA header file. Change-Id: Ie19440abdd76500a5e12e6791e6f755ad9e95af3 Reviewed-on: https://gem5-review.googlesource.com/7344 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2018-01-20arch, mem: Make the page table lookup function return a pointer.Gabe Black
This avoids having a copy in the lookup function itself, and the declaration of a lot of temporary TLB entry pointers in callers. The gpu TLB seems to have had the most dependence on the original signature of the lookup function, partially because it was relying on a somewhat unsafe copy to a TLB entry using a base class pointer type. Change-Id: I8b1cf494468163deee000002d243541657faf57f Reviewed-on: https://gem5-review.googlesource.com/7343 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20sim, arch, base: Refactor the base remote GDB class.Gabe Black
Fold the GDBListener class into the main BaseRemoteGDB class, move around a bunch of functions, convert a lot of internal functions to be private, move some functions into the .cc, make some functions non-virtual which didn't really need to be overridden. Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d Reviewed-on: https://gem5-review.googlesource.com/7422 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-19arch, mem, sim: Consolidate and rename the SE mode page table classes.Gabe Black
Now that Nothing inherits from PageTableBase directly, it can be merged into FuncPageTable. This change also takes the opportunity to rename the combined class to EmulationPageTable which lets you know that it's specifically for SE mode. Also remove the page table entry cache since it doesn't seem to actually improve performance. The TLBs likely absorb the majority of the locality, essentially acting like a cache like they would in real hardware. Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13 Reviewed-on: https://gem5-review.googlesource.com/7342 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-11arch,mem: Remove the default value for page size.Gabe Black
This breaks one more architecture dependence outside of the ISAs. Change-Id: I071f9ed73aef78e1cd1752247c183e30854b2d28 Reviewed-on: https://gem5-review.googlesource.com/6982 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-11arch,mem: Move page table construction into the arch classes.Gabe Black
This gets rid of an awkward NoArchPageTable class, and also gives the arch a place to inject ISA specific parameters (specifically page size) without having to have TheISA:: in the generic version of these types. Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441 Reviewed-on: https://gem5-review.googlesource.com/6981 Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-10alpha,arm,mips,power,riscv,sparc,x86,cpu: Get rid of ISA_HAS_DELAY_SLOT.Gabe Black
This constant is, first, a #define, and second only used in one place. In that one place, it appears that the code it guards is no longer necessary in general. It was originally written to avoid refetching a block of data that you're still in, even if you've moved slightly farther in it because you're skipping the next instruction due to an annulled branch delay slot. In reality however, in SPARC, the one ISA I'm aware of which has this sort of branching behavior, the PC state object will correctly determine that no branch is happening in these cases. Code lower down in the loop will then recompute where fetching should continue based on the next PC, automatically skipping the annulled branch slot without misinterpretting the gap as a branch. This change therefore also removes this block of code. Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c Reviewed-on: https://gem5-review.googlesource.com/6821 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2017-12-23alpha,arm,mips,power,riscv,sparc,x86: Get rid of TheISA::NoopMachInst.Gabe Black
It's no longer used. Change-Id: I4a71bcb214f1bb186b92ef50841eca635e6701c5 Reviewed-on: https://gem5-review.googlesource.com/6826 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-23riscv,x86: Stop using the arch Nop machine instruction unnecessarily.Gabe Black
That particular ExtMachInst is a convenient placeholder, but a value of 0 in RISCV or a static uninitialized ExtMachInst (which will therefore be all zeroes) on x86 works just as well, and removes the need for an ISA specific constant. Also, the idea of a universal Nop doesn't always make sense since it could be that what, exactly, doesn't do anything depends on context which would be lost on a constant value of an ExtMachInst. For instance, the value of an ExtMachInst that makes sense might depend on what mode the CPU was in, etc. Change-Id: I1f1a43a5c607a667e11b79bcf6e059e4f7141b3f Reviewed-on: https://gem5-review.googlesource.com/6825 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-22arch,cpu: "virtualize" the TLB interface.Gabe Black
CPUs have historically instantiated the architecture specific version of the TLBs to avoid a virtual function call, making them a little bit more dependent on what the current ISA is. Some simple performance measurement, the x86 twolf regression on the atomic CPU, shows that there isn't actually any performance benefit, and if anything the simulator goes slightly faster (although still within margin of error) when the TLB functions are virtual. This change switches everything outside of the architectures themselves to use the generic BaseTLB type, and then inside the ISA for them to cast that to their architecture specific type to call into architecture specific interfaces. The ARM TLB needed the most adjustment since it was using non-standard translation function signatures. Specifically, they all took an extra "type" parameter which defaulted to normal, and translateTiming returned a Fault. translateTiming actually doesn't need to return a Fault because everywhere that consumed it just stored it into a structure which it then deleted(?), and the fault is stored in the Translation object when the translation is done. A little more work is needed to fully obviate the arch/tlb.hh header, so the TheISA::TLB type is still visible outside of the ISAs. Specifically, the TlbEntry type is used in the generic PageTable which lives in src/mem. Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575 Reviewed-on: https://gem5-review.googlesource.com/6921 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-14misc: Updates for gcc7.2 for x86Jason Lowe-Power
GCC 7.2 is much stricter than previous GCC versions. The following changes are needed: * There is now a warning if there is an implicit fallthrough between two case statments. C++17 adds the [[fallthrough]]; declaration. However, to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH. M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and if that doesn't exist, it defaults to nothing (no older compilers generate warnings). * The above resulted in a couple of bugs that were found. This is noted in the review request on gerrit. * throw() for dynamic exception specification is deprecated * There were a couple of new uninitialized variable warnings * Can no longer perform bitwise operations on a bool. * Must now include <functional> for std::function * Compiler bug for void* lambda. Changed to auto as work around. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878 Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e Signed-off-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-on: https://gem5-review.googlesource.com/5802 Reviewed-by: Gabe Black <gabeblack@google.com>
2017-12-14x86: Use operand size 4 when it would be 2 for cmpxchg8b.Gabe Black
This means the instruction is treated as cmpxchg8b when the effective operand size is 16 bits. Change-Id: I4d9bb295f96097e1746a9bbccb2c579d14738fab Reviewed-on: https://gem5-review.googlesource.com/6603 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-13arm,sparc,x86,base,cpu,sim: Replace the Twin(32|64)_t types with.Gabe Black
Replace them with std::array<>s. Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34 Reviewed-on: https://gem5-review.googlesource.com/6602 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-12-13x86: Rework how "split" loads/stores are handled.Gabe Black
Explicitly separate the way the data is represented in the underlying representation from how it's represented in the instruction. In order to make the ISA parser happy, the Mem operand needs to have a single, particular type. To handle that with scalar types, we just used uint64_ts and then worked with values that were smaller than the maximum we could hold. To work with these new array values, we also use an underlying uint64_t for each element. To make accessing the underlying memory system more natural, when we go to actually read or write values, we translate the access into an array of the actual, correct underlying type. That way we don't have non-exact asserts which confuse gcc, or weird endianness conversion which assumes that the data should be flipped 8 bytes at a time. Because the functions involved are generally inline, the syntactic niceness should all boil off, and the final implementation in the binary should be simple and efficient for the given data types. Change-Id: I14ce7a2fe0dc2cbaf6ad4a0d19f743c45ee78e26 Reviewed-on: https://gem5-review.googlesource.com/6582 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-08x86,misc: add additional info on faulting X86 instruction, fetched PCMatt Sinclair
Print faulting instruction for unmapped address panic in faults.cc and print extra info about corresponding fetched PC in base.cc. Change-Id: Id9e15d3e88df2ad6b809fb3cf9f6ae97e9e97e0f Reviewed-on: https://gem5-review.googlesource.com/6461 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2017-12-06x86: Split apart x87's FSW and TOP, and add a missing break.Gabe Black
The FSW and TOP values are technically part of the same register, but they have very different behaviors. One of them can be renamed and float along without affecting global state, while the other requires serialization. They just need to *look* like the same register when read by the user. Also, there was a missing break in setMiscRegNoEffect. Change-Id: If58de0f566f65068208240f4001209fb9e1826d6 Reviewed-on: https://gem5-review.googlesource.com/6441 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 04:25:03 +0000