summaryrefslogtreecommitdiff
path: root/src/arch
AgeCommit message (Collapse)Author
2016-04-01syscall_emul: remove mmapFlagTableSteve Reinhardt
After all this it turns out we don't even use it.
2016-04-01syscall_emul: factor out flag tables into common fileSteve Reinhardt
The openFlagTable and mmapFlagTables for emulated Linux platforms are basically identical, but are specified repetitively for every platform. Use a common file that gets included for each platform so that we only have one copy, making them more consistent and simplifying changes (like adding #ifdefs). In the process, made some minor fixes that slipped through due to previous inconsistencies, and added more #ifdefs to try to fix building on alternative hosts.
2016-03-21arm: Refactor the TLB test interfaceAndreas Sandberg
Refactor the TLB and page table walker test interface to use a dynamic registration mechanism. Instead of patching a couple of empty methods to wire up a TLB tester, this change allows such testers to register themselves using the setTestInterface() method.
2016-03-17base: add symbol support for dynamic librariesBrandon Potter
Libraries are loaded into the process address space using the mmap system call. Conveniently, this happens to be a good time to update the process symbol table with the library's incoming symbols so we handle the table update from within the system call. This works just like an application's normal symbols. The only difference between a dynamic library and a main executable is when the symbol table update occurs. The symbol table update for an executable happens at program load time and is finished before the process ever begins executing. Since dynamic linking happens at runtime, the symbol loading happens after the library is first loaded into the process address space. The library binary is examined at this time for a symbol section and that section is parsed for symbol types with specific bindings (global, local, weak). Subsequently, these symbols are added to the table and are available for use by gem5 for things like trace generation. Checkpointing should work just as it did previously. The address space (and therefore the library) will be recorded and the symbol table will be entirely recorded. (It's not possible to do anything clever like checkpoint a program and then load the program back with different libraries with LD_LIBRARY_PATH, because the library becomes part of the address space after being loaded.)
2016-03-17base: support dynamic loading of Linux ELF objects in SE modeBrandon Potter
2016-03-17syscall_emul: update x86 mmap base addressBrandon Potter
2016-03-17syscall_emul: move mmapGrowsDown() to LiveProcessSteve Reinhardt
The mmapGrowsDown() method was a static method on the OperatingSystem class (and derived classes), which worked OK for the templated syscall emulation methods, but made it hard to access elsewhere. This patch moves the method to be a virtual function on the LiveProcess method, where it can be overridden for specific platforms (for now, Alpha). This patch also changes the value of mmapGrowsDown() from being false by default and true only on X86Linux32 to being true by default and false only on Alpha, which seems closer to reality (though in reality most people use ASLR and this doesn't really matter anymore). In the process, also got rid of the unused mmap_start field on LiveProcess and OperatingSystem mmapGrowsUp variable.
2016-03-17syscall_emul: fix bugs for mmap2 system call and x86-32 syscallsBrandon Potter
2016-03-17syscall_emul: extend mmap system call to support file backed mmapsBrandon Potter
For O3, which has a stat that counts reg reads, there is an additional reg read per mmap() call since there's an arg we no longer ignore. Otherwise, stats should not be affected.
2016-03-17syscall_emul: add many Linux kernel flagsBrandon Potter
2016-03-17syscall_emul: rename OpenFlagTransTable structBrandon Potter
The structure definition only had the open system call flag set in mind when it was named, so we rename it here with the intention of using it to define additional tables to translate flags for other system calls in the future.
2016-03-16arm: Fix disasm printingNathanael Premillieu
Fix the printDataInst function to properly print the immediate value.
2015-11-27base: Add support for changing output directoriesAndreas Sandberg
This changeset adds support for changing the simulator output directory. This can be useful when the simulation goes through several stages (e.g., a warming phase, a simulation phase, and a verification phase) since it allows the output from each stage to be located in a different directory. Relocation is done by calling core.setOutputDir() from Python or simout.setOutputDirectory() from C++. This change affects several parts of the design of the gem5's output subsystem. First, files returned by an OutputDirectory instance (e.g., simout) are of the type OutputStream instead of a std::ostream. This allows us to do some more book keeping and control re-opening of files when the output directory is changed. Second, new subdirectories are OutputDirectory instances, which should be used to create files in that sub-directory. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> [sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version] Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2015-08-10mem, cpu: Add assertions to snoop invalidation logicStephan Diestelhorst
This patch adds assertions that enforce that only invalidating snoops will ever reach into the logic that tracks in-order load completion and also invalidation of LL/SC (and MONITOR / MWAIT) monitors. Also adds some comments to MSHR::replaceUpgrades().
2016-02-29arm: Squash after returning from exceptions in v7Mitch Hayenga
Properly done for the ERET instruction in v8, but not for v7. Many control register changes are only visible after explicit instruction synchronization barriers or exception entry/exit. This means mode changing instructions should squash any younger in-flight speculative instructions.
2016-02-23scons: Add missing override to appease clangAndreas Hansson
Make clang happy...again.
2016-02-15misc: Add missing overrides to appease clangAndreas Hansson
Since the last round of fixes a few new issues have snuck in. We should consider switching the regression runs to clang.
2016-02-13syscall_emul: Implement clock_getres() system callMichael LeBeane
This patch implements the clock_getres() system call for arm and x86 in linux SE mode.
2016-02-06x86: revamp cmpxchg8b/cmpxchg16b implementationAlexandru Dutu
The previous implementation did a pair of nested RMW operations, which isn't compatible with the way that locked RMW operations are implemented in the cache models. It was convenient though in that it didn't require any new micro-ops, and supported cmpxchg16b using 64-bit memory ops. It also worked in AtomicSimpleCPU where atomicity was guaranteed by the core and not by the memory system. It did not work with timing CPU models though. This new implementation defines new 'split' load and store micro-ops which allow a single memory operation to use a pair of registers as the source or destination, then uses a single ldsplit/stsplit RMW pair to implement cmpxchg. This patch requires support for 128-bit memory accesses in the ISA (added via a separate patch) to support cmpxchg16b.
2016-02-06arch, x86: add support for arrays as memory operandsSteve Reinhardt
Although the cache models support wider accesses, the ISA descriptions assume that (for the most part) memory operands are integer types, which makes it difficult to define instructions that do memory accesses larger than 64 bits. This patch adds some generic support for memory operands that are arrays of uint64_t, and specifically a 'u2qw' operand type for x86 that is an array of 2 uint64_ts (128 bits). This support is unused at this point, but will be needed shortly for cmpxchg16b. Ideally the 128-bit SSE memory accesses will also be rewritten to use this support. Support for 128-bit accesses could also have been added using the gcc __int128_t extension, which would have been less disruptive. However, although clang also supports __int128_t, it's still non-standard. Also, more importantly, this approach creates a path to defining 256- and 512-byte operands as well, which will be useful for eventual AVX support.
2016-02-06arch: get rid of dummy var initSteve Reinhardt
MemOperand variables were being initialized to 0 "to avoid 'uninitialized variable' errors" but these no longer seem to be a problem (with the exception of one use case in POWER that is arguably broken and easily fixed here). Getting rid of the initialization is necessary to set up a subsequent patch which extends memory operands to possibly not be scalars, making the '= 0' initialization no longer feasible.
2016-02-06syscall_emul: fix bug in aux vector initializationSteve Reinhardt
Writing 16 bytes from an 8-byte source value is a bad idea. This doesn't appear to have broken anything, but showed up as spurious differences when tracediffing runs.
2016-02-06style: eliminate explicit boolean comparisonsSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-control -a' to get rid of '== true' comparisons, plus trivial manual edits to get rid of '== false'/'== False' comparisons. Left a couple of explicit comparisons in where they didn't seem unreasonable: invalid boolean comparison in src/arch/mips/interrupts.cc:155 >> DPRINTF(Interrupt, "Interrupts OnCpuTimerINterrupt(tc) == true\n");<< invalid boolean comparison in src/unittest/unittest.hh:110 >> "EXPECT_FALSE(" #expr ")", (expr) == false)<<
2016-02-06x86: create function to check miscreg validitySteve Reinhardt
In the process of trying to get rid of an '== false' comparison, it became apparent that a slightly more involved solution was needed. Split this out into its own changeset since it's not a totally trivial local change like the others.
2016-02-06style: fix missing spaces in control statementsSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-control -a'.
2016-02-06style: remove trailing whitespaceSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-white -a'.
2016-01-19gpu-compute: AMD's baseline GPU modelTony Gutierrez
2016-01-17cpu. arch: add initiateMemRead() to ExecContext interfaceSteve Reinhardt
For historical reasons, the ExecContext interface had a single function, readMem(), that did two different things depending on whether the ExecContext supported atomic memory mode (i.e., AtomicSimpleCPU) or timing memory mode (all the other models). In the former case, it actually performed a memory read; in the latter case, it merely initiated a read access, and the read completion did not happen until later when a response packet arrived from the memory system. This led to some confusing things, including timing accesses being required to provide a pointer for the return data even though that pointer was only used in atomic mode. This patch splits this interface, adding a new initiateMemRead() function to the ExecContext interface to replace the timing-mode use of readMem(). For consistency and clarity, the readMemTiming() helper function in the ISA definitions is renamed to initiateMemRead() as well. For x86, where the access size is passed in explicitly, we can also get rid of the data parameter at this level. For other ISAs, where the access size is determined from the type of the data parameter, we have to keep the parameter for that purpose.
2016-01-17arch: don't call *Timing functions from *Atomic versionsSteve Reinhardt
The readMemAtomic/writeMemAtomic helper functions were calling readMemTiming/writeMemTiming respectively. This is functionally correct, since the *Timing functions are doing the same access initiation operation as the *Atomic functions (just that the *Atomic versions also complete the access in line). It also provides for some (very minimal) code reuse. Unfortunately, it's potentially pretty confusing, since it makes it look like the atomic accesses are somehow being converted to timing accesses. It also gets in the way of specializing the timing interface (as will be done in a future patch).
2016-01-17arch: get rid of unused LargestRead typedefSteve Reinhardt
2016-01-17sim: don't ignore SIG_TRAPSteve Reinhardt
By ignoring SIG_TRAP, using --debug-break <N> when not connected to a debugger becomes a no-op. Apparently this was intended to be a feature, though the rationale is not clear. If we don't ignore SIG_TRAP, then using --debug-break <N> when not connected to a debugger causes the simulation process to terminate at tick N. This is occasionally useful, e.g., if you just want to collect a trace for a specific window of execution then you can combine this with --debug-start to do exactly that. In addition to not ignoring the signal, this patch also updates the --debug-break help message and deletes a handful of unprotected calls to Debug::breakpoint() that relied on the prior behavior.
2016-01-11scons: Enable -Wextra by defaultAndreas Hansson
Make best use of the compiler, and enable -Wextra as well as -Wall. There are a few issues that had to be resolved, but they are all trivial.
2016-01-07pseudo inst,util: Add optional key to initparam pseudo instructionGabor Dozsa
The key parameter can be used to read out various config parameters from within the simulated software.
2015-12-18arm: remote GDB: rationalize structure of register offsetsBoris Shingarov
Currently, the wire format of register values in g- and G-packets is modelled using a union of uint8/16/32/64 arrays. The offset positions of each register are expressed as a "register count" scaled according to the width of the register in question. This results in counter- intuitive and error-prone "register count arithmetic", and some formats would even be altogether unrepresentable in such model, e.g. a 64-bit register following a 32-bit one would have a fractional index in the regs64 array. Another difficulty is that the array is allocated before the actual architecture of the workload is known (and therefore before the correct size for the array can be calculated). With this patch I propose a simpler mechanism for expressing the register set structure. In the new code, GdbRegCache is an abstract class; its subclasses contain straightforward structs reflecting the register representation. The determination whether to use e.g. the AArch32 vs. AArch64 register set (or SPARCv8 vs SPARCv9, etc.) is made by polymorphically dispatching getregs() to the concrete subclass. The subclass is not instantiated until it is needed for actual g-/G-packet processing, when the mode is already known. This patch is not meant to be merged in on its own, because it changes the contract between src/base/remote_gdb.* and src/arch/*/remote_gdb.*, so as it stands right now, it would break the other architectures. In this patch only the base and the ARM code are provided for review; once we agree on the structure, I will provide src/arch/*/remote_gdb.* for the other architectures; those patches could then be merged in together. Review Request: http://reviews.gem5.org/r/3207/ Pushed by Joel Hestness <jthestness@gmail.com>
2015-12-04arm, config: Automatically discover available platformsAndreas Sandberg
Add support for automatically discover available platforms. The Python-side uses functionality similar to what we use when auto-detecting available CPU models. The machine IDs have been updated to match the platform configurations. If there isn't a matching machine ID, the configuration scripts default to -1 which Linux uses for device tree only platforms.
2015-12-03arm: Add support for automatic boot loader selectionAndreas Sandberg
Add support for automatically selecting a boot loader that matches the guest system's kernel. Instead of accepting a single boot loader, the ArmSystem class now accepts a vector of boot loaders. When initializing a system, the we now look for the first boot loader with an architecture that matches the kernel. This changeset makes it possible to use the same system for both 64-bit and 32-bit kernels.
2015-11-22arm: Fix fplib 128-bit shift operatorsNathanael Premillieu
Appease clang.
2015-11-16x86: Invalidating TLB entry on page faultSwapnil Haria
As per the x86 architecture specification, matching TLB entries need to be invalidated on a page fault. For instance, after a page fault due to inadequate protection bits on a TLB hit, the TLB entry needs to be invalidated. This behavior is clearly specified in the x86 architecture manuals from both AMD and Intel. This invalidation is missing currently in gem5, due to which linux kernel versions 3.8 and up cannot be simulated efficiently. This is exposed by a linux optimisation in commit e4a1cc56e4d728eb87072c71c07581524e5160b1, which removes a tlb flush on updating page table entries in x86. Testing: Linux kernel versions 3.8 onwards were booting very slowly in FS mode, due to repeated page faults (~300000 before the first print statement in a bash file). Ensured that page fault rate drops drastically and observed reduction in boot time from order of hours to minutes for linux kernel v3.8 and v3.11
2015-11-16x86: cpuid: add family to warn() messageBjoern A. Zeeb
doCpuid() has to identical warn messages about unimplemented functions. Add the family to the log message to make them distinguishable. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-11-16x86: pagetable walker: fix typo in commentBjoern A. Zeeb
2015-11-16sparc: Make remote debugging with gdb workPalle Lyckegaard
Remove sparc V8 TBR register from list of registers since it is not part of sparc V9. This brings the number of registers in sync with what gdb expects Without this patch gdb complains about receoved packet too long. with this patch gdb is able to work properly with gem5 for remote debugging. Note: gdb is version 7.8 Note: gdb is configured with --target=sparc64-sun-solaris2.8 Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-10-29arm: Add secure flag to TableWalker request when neededNathanael Premillieu
2015-10-29kvm, arm: Fix compilation errors due to API changesVictor Garcia
The checkpoint changes, along with the SMT patches have changed a number of APIs. Adapt the ArmKvmCPU accordingly.
2015-10-25power: Implement Remote GDBBoris Shingarov
2015-10-23x86: Add missing explicit overrides for X86 devicesAndreas Hansson
Make clang >= 3.5 happy when compiling build/X86/gem5.opt on OSX.
2015-10-12misc: Add explicit overrides and fix other clang >= 3.5 issuesAndreas Hansson
This patch adds explicit overrides as this is now required when using "-Wall" with clang >= 3.5, the latter now part of the most recent XCode. The patch consequently removes "virtual" for those methods where "override" is added. The latter should be enough of an indication. As part of this patch, a few minor issues that clang >= 3.5 complains about are also resolved (unused methods and variables).
2015-10-12misc: Remove redundant compiler-specific definesAndreas Hansson
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap (and similar) abstractions, as these are no longer needed with gcc 4.7 and clang 3.1 as minimum compiler versions.
2015-10-09isa: Add parameter to pick different decoder inside ISARekai Gonzalez Alberquilla
The decoder is responsible for splitting instructions in micro operations (uops). Given that different micro architectures may split operations differently, this patch allows to specify which micro architecture each isa implements, so different cores in the system can split instructions differently, also decoupling uop splitting (microArch) from ISA (Arch). This is done making the decodification calls templates that receive a type 'DecoderFlavour' that maps the name of the operation to the class that implements it. This way there is only one selection point (converting the command line enum to the appropriate DecodeFeatures object). In addition, there is no explicit code replication: template instantiation hides that, and the compiler should be able to resolve a number of things at compile-time.
2015-10-06arch: clean up isa_parser error handlingSteve Reinhardt
Although some decent error messages were getting generated inside isa_parser.py, they weren't always getting printed because of the screwy way we were handling exceptions. (Basically an inner exception would get hidden by an outer exception, and the more informative inner error message would not get printed.) Also line numbers were messed up, since they were taken from the lexer, which is typically a token (or more) ahead of the grammar rule that's being matched. Using the 'lineno' attribute that PLY associates with the grammar production is more accurate. The new LineTracker class extends lineno to track filenames as well as line numbers.
2015-10-06x86: implement rcpps and rcpss SSE instsSteve Reinhardt
These are packed single-precision approximate reciprocal operations, vector and scalar versions, respectively. This code was basically developed by copying the code for sqrtps and sqrtss. The mrcp micro-op was simplified relative to msqrt since there are no double-precision versions of this operation.