| Age | Commit message (Collapse) | Author |
|---|
|
this patch fixes issues with changeset 11593
use the host's pwrite() syscall for pwrite64Func(),
as opposed to pwrite64(), because pwrite64() does
not work well on all distros.
undo the enabling of fstatfs, as we will add this
in a separate pate.
|
|
this patch adds an implementation for the pwrite64 syscall and
enables it for x86_64, and enables fstatfs for x86_64.
|
|
Introduce and use a lookup table.
Using fetchDescriptor() rather than DMA cleanly handles nested paging.
Change-Id: I69ec762f176bd752ba1040890e731826b58d15a6
|
|
During host bootup, KVM reads/writes to CNTHCTL_EL2. Because this
miscreg has not been implemented, the simulation would end there. This
patch causes the simulation to warn about the read/write instead of fail.
Change-Id: If034bfd0818a9a5e50c5fe86609e945258c96fa3
|
|
This fixes a bug where stage 2 lookups used the AArch32
permissions rules even if we were executing in AArch64 mode.
Change-Id: Ia40758f0599667ca7ca15268bd3bf051342c24c1
|
|
This patch corrects IPA reporting if the translation faults in a
stage 2 lookup.
Change-Id: I0b914527f8a9f98a5e980a131cf9d03e5584b4e9
|
|
This patch adds support for stage 2 TLBI instructions
such as TLBI IPAS2E1_Xt.
Change-Id: I0cd5e8055b0c1003e03439aa5183252f50ea0a88
|
|
Change-Id: I14c93a5460550051a12129e792a9a9bd522a145c
|
|
This patch restricts trapping to hypervisor only if we are in the
correct exception level for the trap to happen.
Change-Id: I0a382b6a572ef835ea36d2702b8a81b633bd3df0
|
|
Faults that could potentially be routed to the hypervisor checked
whether or not they were in a secure state without checking if security
was enabled or not. This caused faults not to be routed correctly. This
patch causes secure state checking to first ask if security is enabled.
Change-Id: I179e9b181b27f552734c9bab2b18d05ac579a119
|
|
We recompute if we are doing a stage 2 walk inside of the table walker
but we have already figured it out in the tlb. Pass the information in
to the walk instead of recomputing it.
Change-Id: I39637ce99309b2ddbc30344d45ac9ebf6a203401
|
|
The functional case is already handled within the fetchDescriptor()
function. We can thus use that function for both atomic and functional
mode when we start the table walk.
Change-Id: Iacaed28cd9024d259fd37a58150efd00ff94d86e
|
|
This patch adds the option for faults to be routed to the hypervisor
using the pre-existing routeToHyp() functions that are present in each
fault type.
Change-Id: I9735512c094457636b9870456a5be5432288e004
|
|
During address translation instructions (such as AT S1E1R_Xt) the exception
level can be different than the current exception level. This patch fixes
how the TLB determines what EL to use during these instructions.
Change-Id: Ia9ce229404de9e284bc1f7479fd2c580efd55f8f
|
|
This patch adds the AArch64 instruction hvc which raises an exception
from EL1 into EL2. The host OS uses this instruction to world switch
into the guest.
Change-Id: I930ee43f4f0abd4b35a68eb2a72e44e3ea6570be
|
|
Change-Id: I8f7c09c7ec3a97149ebebf4b21471b244e6cecc1
|
|
Change-Id: I59fa4fae98c33d9e5c2185382e1411911d27d341
|
|
Change-Id: I5212c91c56435fe008950ed99feacc6921609226
|
|
Change-Id: I122918d0e3dfd01ae1a4ca4f19240a069115c8b7
|
|
Make it so that getInterrupt *always* returns an interrupt if
checkInterrupts() returns true. This fixes/simplifies handling
of interrupts on the SMT FS CPUs (currently minor).
|
|
Don't consult the TLB test interface for PA's returned by functional
translations by the AT instruction. We implement this by chaning the
ISA code to synthesize 0-length functional reads for the TLB lookup.
The TLB then bypasses the final PA check in the tester if the size is
zero.
Change-Id: I2487b7f829cea88c37e229e9fc7a4543aced961b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
Previously when we initialized the TLB we would allocate a number of
TLB entries which would be marked as valid. As a result the TLB
contained an entry which would be considered a valid entry for the 0
page.
Change-Id: I23ace86426a171a4f6200ebeb29ad57c21647036
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Add helper functions to dump the guest kernel's dmesg buffer to a text
file in m5out. This functionality is split into two parts. First, a
dmesg dump function that can be used in other places:
void Linux::dumpDmesg(ThreadContext *, std::ostream &)
This function is used to implement two PCEvents: DmesgDumpEvent and
KernelPanic event. The only difference between the two is that the
latter produces a gem5 panic instead of a warning in addition to
dumping the kernel log.
Change-Id: I6d2af1d666ace57124089648ea906f6c787ac63c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
|
|
There is a mismatch between DataType and SrcDataType in constructing
Atomic ST instruction. The mismatch causes atomic_store and
atomic_store_explicit function to store incorrect value in memory.
|
|
Eliminate the VSZ constant that defined the Wavefront size (in numbers of work
items); replaced it with a parameter in the GPU.py configuration script.
Changed all data structures dependent on the Wavefront size to be dynamically
sized. Legal values of Wavefront size are 16, 32, 64 for now and checked at
initialization time.
|
|
Fixing an issue with regStats not calling the parent class method
for most SimObjects in Gem5. This causes issues if one adds new
stats in the base class (since they are never initialized properly!).
Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
We want to extend the stats of objects hierarchically and thus it is necessary
to register the statistics of the base-class(es), as well. For now, these are
empty, but generic stats will be added there.
Patch originally provided by Akash Bagdia at ARM Ltd.
|
|
In particular, when EL0 is in AArch32 but EL1 is AArch64, AArch64
memory translation must be used. This is essential for typical
AArch64/32 interworking use cases.
|
|
The ERET instruction doesn't set PSTATE correctly in some cases
(particularly when returning to aarch32 code). Among other things,
this breaks EL0 thumb code when using a 64-bit kernel. This changeset
updates the ERET implementation to match the ARM ARM.
Change-Id: I408e7c69a23cce437859313dfe84e68744b07c98
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
|
|
The current implementation of aarch32 FP/SIMD in gem5 assumes that EL1
and higher are all 32-bit. This breaks interprocessing since an
aarch64 EL1 uses different enable/disable bits. This change updates
the permission checks to according to what is prescribed by the ARM
ARM.
Change-Id: Icdcef31b00644cfeebec00216b3993aa1de12b88
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
|
|
LPAE has been tested with Linux 4.4 and seems to work just fine. Let's
enable it by default.
Change-Id: Id88c6e3c91ae9c353279d42f2aa1f8a78485bd32
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
|
|
According to the ARM ARM (see AArch32.TranslateAddress in the
pseudocode library), the TLB should be operating in aarch64 mode if
the EL0 is aarch32 and EL1 is aarch64. This is currently not the case
in gem5, which breaks 64/32 interprocessing. Update the check to match
the reference manual.
Change-Id: I6f1444d57c0e2eb5f8880f513f33a9197b7cb2ce
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
We currently check the current state instead of the state of the
target EL when determining how we report a fault. This breaks
interprocessing since EL0 in aarch32 would report its fault status
using the aarch32 registers even if EL1 is in aarch64. Fix this to
report the fault using the format of the target EL.
Change-Id: Ic080267ac210783d1e01c722a4ddaa687dce280e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
|
|
The TLB currently assumes that the pxn bit in an LPAE page descriptor
disables execution from unprivileged mode. However, according to the
architecture manual, this bit should disable execution from privileged
modes. Update the TLB implementation to reflect this behavior.
Change-Id: I7f1bb232d7a94a93fd601a9230223195ac952947
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
A lot of code assumes that it is possible to test what the highest EL
is and if it is 64 bit. These calls currently don't work in SE mode
since they rely on an instance of an ArmSystem.
Change-Id: I0d1f261926a66ce3dc4fa116845ffb2a081446f2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
|
|
This patch fixes an issue identified by ASAN where the Neon64Load
operation assumes the packet always contains 16 bytes.
Change-Id: If24a7e461d60cb80970dfbe61d923d7d56926698
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
According to the Intel Multi Processor Specification rev 1.4 (-006) (*),
section 4.3.2 Bus Entries, Bus type strings are >>6-character ASCII
(blank-filled) strings<<.
This patch properly pads the entries with the missing spaces at the end.
(*) http://www.intel.com/design/pentium/datashts/24201606.pdf
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
Registers are 0x10 and not 0x8 apart. The latter leads to invalid
calculations of index in array which in turn means that we will not
find the interrupt we were looking (been notified) for in the OS.
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
The LinuxArmSystem class normally provides support for panicing gem5
if the simulated kernel panics. When this is turned off (default),
gem5 uses a BreakPCEvent to provide a debugger hook into the simulator
when the kernel crashes. This hook unconditionally kills gem5 with a
SIGTRAP unless gem5 is compiled in fast mode. This is undesirable
since the panic_on_panic param already provides similar functionality.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Add support for overriding the number of interrupt lines in the ARM
KvmGic.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Factor out the kernel device wrapper from the KvmGIC and put it in a
separate class. This will simplify a future kernel/gem5 hybrid GIC.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Remve the assertion that we always need to add a delta larger than
zero as that does not seem to be true when we hit it in the
'PMU reset cycle counter to zero' case.
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
A few warnings (and thus errors) pop up after being added to -Wall:
1. -Wmisleading-indentation
In the auto-generated code there were instances of if/else blocks that
were not indented to gcc's liking. This is addressed by adding braces.
2. -Wshift-negative-value
gcc is clever enougn to consider ~0 a negative constant, and
rightfully complains. This is addressed by using mask() which
explicitly casts to unsigned before shifting.
That is all. Porting done.
|
|
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.
|
|
|
|
The following patches had unexpected interactions with the current
upstream code and have been reverted for now:
e07fd01651f3: power: Add support for power models
831c7f2f9e39: power: Low-power idle power state for idle CPUs
4f749e00b667: power: Add power states to ClockedObject
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
--HG--
extra : amend_source : 0b6fb073c6bbc24be533ec431eb51fbf1b269508
|
|
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
|
|
Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.
Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.
Add dump call back function to allow stats update of distribution and residency
stats.
|
|
After all this it turns out we don't even use it.
|
|
The openFlagTable and mmapFlagTables for emulated Linux
platforms are basically identical, but are specified
repetitively for every platform. Use a common file
that gets included for each platform so that we only
have one copy, making them more consistent and simplifying
changes (like adding #ifdefs).
In the process, made some minor fixes that slipped through
due to previous inconsistencies, and added more #ifdefs
to try to fix building on alternative hosts.
|
