summaryrefslogtreecommitdiff
path: root/src/arch
AgeCommit message (Collapse)Author
2018-02-08arch-arm: Don't change PSTATE in Illegal Exception returnGiacomo Travaglini
This patch fixes the Illegal Exception return handler. According to the armarm documentation, when PSTATE.IL is set to one because of an illegal exception return, PSTATE.{EL, nRW, SP} are unchanged. This means the Exception level, Execution state, and stack pointer selection do not change as a result of the return. Change-Id: I35f2fe68fb2822a54fc4a21930871eab7a1aaab4 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/8021 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-08arch-arm: Handle route to EL2 in Supervisor TrapChuan Zhu
Supervisor Trap is supposed to be able to handle exceptions routed to EL2, which is enabled by HCR_EL2.TGE. This fix adds routeToHyp() function to Supervisor Trap to handle this, similar to that in UndefinedFault, DataAbort, etc. Change-Id: I1fcf9f2d445ecbc13c8f6d3b7d599728b0250ab7 Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7961 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Change the type of fault for dc ivac instructionsNikos Nikoleris
Change-Id: I00f957a3bc4721a66db62b1257f10e9019a94608 Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7829 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
2018-02-07arch-arm: Unify permission checks for dc * instructionsNikos Nikoleris
Change-Id: Ib47f4134e3f0a580e5356d384a5d3b293c1af7be Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7828 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Check cache maintenance insts for permission faultsNikos Nikoleris
In AArch32, data cache maintenance instructions that operate by VA do not generate permission faults. In AArch64, a data cache invalidate instruction can generate a permission fault when there are no write permissions to the specified VA. Data cache clean and data cache clean and invalidate instructions do not generate permission faults. Checks for external aborts are also bypassed for data cache maintenance instructions. Change-Id: Iea5bc665e4cf66d528e36b671535b66637c4b224 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7827 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Turn dc ivac to dc civac when some conditions are metNikos Nikoleris
The Arm ARM defines that at EL1 a data cache invalidate instruction performs a data cache clean and invalidate operation if all of the following apply: * EL2 is implemented, * HCR_EL2.VM is set to 1, * SCR_EL3.NS is set to 1 or EL3 is not implemented. This changeset implements this behavior. Change-Id: I6b6aef2f4b1e7eb107c069fdb0a10f4aa8e6b196 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7826 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Fix printing of the data cache maintenance instructionsNikos Nikoleris
Change-Id: I2322c7bf65b38cb07a1ea2b5dc25dfc5a0496cf0 Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7825 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
2018-02-07arch-arm: Fix cache line size for cache maintenace instNikos Nikoleris
Cache maintenance operations operate on whole cache blocks. This changeset uses the system cache line size as the size of the cache maintenance requests and masks the lower bits of the effective address. Change-Id: I6e7aefff51670c8cac39e4e73db21a0c5a0b7aef Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7824 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Fault when dc ivac is executed from EL0Nikos Nikoleris
A previous change enabled execution of dc ivac from EL0 when SCTLR_EL1.UCI=1. The Arm ARM specifies that dc ivac is the only data cache maintenance operation by VA that cannot be executed from EL0. This changeset essential reverts the change: 8d43922 arch-arm: Allow dc ivac from EL0 when SCTLR_EL1.UCI=1 Change-Id: Ia25fab13846a151f548e649a16067feb1ff65c9c Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7823 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Change function name for banked miscregsGiacomo Travaglini
This commit changes the function's name used for retrieving the index of a security banked register given the flatten index. This will avoid confusion with flattenRegId, which has a different purpose. Change-Id: I470ffb55916cb7fc9f78e071a7f2e609c1829f1a Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7982 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Fix AArch32 SETEND InstructionGiacomo Travaglini
This patch fixes AArch32 SETEND instruction, which was previously executed unconditionally without checking (H)SCTLR.SED field. This bit enables/disables the trapping of the instruction. Change-Id: Ib3d2194c8d16c34ec2a9ab3e8090081900c1e42e Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7981 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Correct Illegal Exception Return detectionGiacomo Travaglini
Fixed Illegal Exception Return detection, which was not covering all the documented cases. Change-Id: If08ddc1490d1c0a1fccee1489d116384770ce0a5 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7223 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: ELUsingAArch32K from armarm pseudocodeGiacomo Travaglini
This patch implements the ELUsingAArch32K pseudocode, which is returning true if the provided Exception Level is using A32 ISA, but it is not panicking (quitting simulation) if the information is unknown (see documentation). The panicking is the current behaviour of the ELIs32 utility in gem5. Change-Id: Iad7b56077d7e0f8ee223b5b9593cb8097f26bb29 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7222 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: isSecureBelow from armarm pseudocodeGiacomo Travaglini
This patch introduces the inSecureBelow pseudocode function defined in the armarm documentation. It also replaces the inSecureState function call which was improperly used in ELIs32: we might be in secure state (EL3), but with non-secure lower ELs (SCR.NS = 1). Change-Id: I01febcb54392ad4e51e785b4d5153aeb3437c778 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Chuan Zhu <chuan.zhu@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7221 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-07arch-arm: Fix incorrect assumptions in ELIs64Chuan Zhu
The state of EL1 wasn't determined correctly when running in secure mode if virtualisation was enabled. This changset updates the implementation to match the canonical behavior from the ARM ARM. Change-Id: I7ed6f5c003617773603f678667aac069d73b6f62 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/7141 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2018-02-05arch-arm: Removing Serializing flag from ISBGiacomo Travaglini
ISB Serializing behaviour is guaranteed by IsSquashAfter, which is inherently serializing; when instruction is commited, consecutive instructions are flushed and refetched. Change-Id: I05e61b4cf9f01113d95b1502c996d04cbd69b759 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5701 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-02-01alpha: fix for no 'break' in the case statementSujay Phadke
gem5 won't compile correctly since g++ will throw a warning (error) that the next case statement below this one is reachable since there is no 'break' statement. Signed-off-by: Sujay Phadke Change-Id: Icab646ee5abcfeb6ba3e690909042927b4003eba Reviewed-on: https://gem5-review.googlesource.com/7521 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-31arch-x86: consistent style of comments in system filesChristian Menard
Change-Id: I9f208819b8c1a5c46a77262eb533bb47adb2b905 Reviewed-on: https://gem5-review.googlesource.com/7701 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-30arch-x86: Granularity bit and segment limitMaximilian Stein
If set, the granularity bit indicates that the segment limit of segment descriptors shall be interpreted as number of 4K blocks rather than bytes. The high part (bit 48 to 51) of segment descriptor limits is only 4 bits wide while the low part (bit 0 to 15) spans 16 bits. Change-Id: Ie386224ca815275fdb31498fe68310ed9c62cc87 Reviewed-on: https://gem5-review.googlesource.com/7601 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-29riscv: Add overrides to various StaticInst methods.Gabe Black
This makes riscv compile with the version of clang(++) I have on my workstation. Change-Id: I0478616810fbc8a715fd61323b7e0f73676c8328 Reviewed-on: https://gem5-review.googlesource.com/7643 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-29arch-arm: understandably initialize register permissionsCurtis Dunham
Move massive initialization routine to the bottom of miscregs.cc. Additionally, share register metadata across ISA instances by making lookUpMiscReg a static member of the ISA and only initializing it once. Change-Id: I6d6ab26200c4e781151cc6efd97ce2420e2bf4cc Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6803 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-29arm: extend MiscReg metadata structuresCurtis Dunham
Implement proper handling of RES0/RES1 and RAZ/RAO bitfields. Change-Id: I344c32c3fb1d142acfb0521ba3590ddd2b1f5360 Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6802 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-29arch-arm: understandably initialize register mappingsCurtis Dunham
The mappings for sharing a backing store between AArch32 and AArch64 system registers are made clearer using an initializer object. Change-Id: I29dcfab2797b4d36b3182342997edffde334a291 Signed-off-by: Curtis Dunham <Curtis.Dunham@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/6801 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-29arm: DT autogeneration - Generate memory nodeGlenn Bergmans
Implements a high level method for generating a Device Tree node for an AbstractMemory object. Change-Id: I544ec642f182f103df26de535fdfaf03b3787a08 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5964 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-29arm: DT autogeneration - Device Tree generation methodsGlenn Bergmans
This patch adds an extra layer to the pyfdt library such that usage gets easier and device tree nodes can be specified in less code, without limiting original usage. Note to not import both the pyfdt and fdthelper in the same namespace (but generally fdthelper is all you need, because it supplies the same classes even when they are not extended in any way) Also, this patch lays out the primary functionality for generating a device tree, where every SimObject gets an empty generateDeviceTree method and ArmSystems loop over their children in an effort to merge all the nodes. Devices are implemented in other patches. Change-Id: I4d0a0666827287fe42e18447f19acab4dc80cc49 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/5962 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-23arch-x86: Adding clflush, clflushopt, clwb instructionsSwapnil Haria
This patch adds support for cache flushing instructions in x86. It piggybacks on support for similar instructions in arm ISA added by Nikos Nikoleris. I have tested each instruction using microbenchmarks. Change-Id: I72b6b8dc30c236a21eff7958fa231f0663532d7d Reviewed-on: https://gem5-review.googlesource.com/7401 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-23arch: Remove the "arch/tlb.hh" switching header.Gabe Black
This header is no longer used. Change-Id: I8da7f8618d647dd11c581818c13855c4e20d32d2 Reviewed-on: https://gem5-review.googlesource.com/7351 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-23tarch, mem: Abstract the data stored in the SE page tables.Gabe Black
Rather than store the actual TLB entry that corresponds to a mapping, we can just store some abstracted information (address, a few flags) and then let the caller turn that into the appropriate entry. There could potentially be some small amount of overhead from creating entries vs. storing them and just installing them, but it's likely pretty minimal since that only happens on a TLB miss (ideally rare), and, if it is problematic, there could be some preallocated TLB entries which are just minimally filled in as necessary. This has the nice effect of finally making the page tables ISA agnostic. Change-Id: I11e630f60682f0a0029b0683eb8ff0135fbd4317 Reviewed-on: https://gem5-review.googlesource.com/7350 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-23x86, mem: Rewrite the multilevel page table class.Gabe Black
The new version extracts all the x86 specific aspects of the class, and builds the interface around a variable collection of template arguments which are classes that represent the different levels of the page table. The multilevel page table class is now much more ISA independent. Change-Id: Id42e168a78d0e70f80ab2438480cb6e00a3aa636 Reviewed-on: https://gem5-review.googlesource.com/7347 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20x86, mem: Don't try to force physical addresses on the system.Gabe Black
Use the system object to allocate physical memory instead of manually placing certain structures and then forcing the system to start other allocations after them in physical memory. Change-Id: Ie18c81645c3b648c64a6d7a649a0e50f7028f344 Reviewed-on: https://gem5-review.googlesource.com/7346 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-20x86, mem: Get rid of PageTableOps::getBasePtr.Gabe Black
Pass this constant into the page table constructor. Change-Id: Icbf730f18d9dfcfebd10a196f7f799514728b0fb Reviewed-on: https://gem5-review.googlesource.com/7345 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-20x86, mem: Pass the multi level page table layout in as a parameter.Gabe Black
Don't get it from a global constant declared in an ISA header file. Change-Id: Ie19440abdd76500a5e12e6791e6f755ad9e95af3 Reviewed-on: https://gem5-review.googlesource.com/7344 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2018-01-20arch, mem: Make the page table lookup function return a pointer.Gabe Black
This avoids having a copy in the lookup function itself, and the declaration of a lot of temporary TLB entry pointers in callers. The gpu TLB seems to have had the most dependence on the original signature of the lookup function, partially because it was relying on a somewhat unsafe copy to a TLB entry using a base class pointer type. Change-Id: I8b1cf494468163deee000002d243541657faf57f Reviewed-on: https://gem5-review.googlesource.com/7343 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20arm, base: Generalize and move the BitUnion hash struct.Gabe Black
The ARM types.hh file defined an STL style hash structure to operate on the ExtMachInst, but it referred to the underlying storage type using internal typedefs in the BitUnion types. To avoid having to do that, this change adds a hash structure to bitunion.hh which will work on any BitUnion, and gets rid of the ARM ExtMachInst version. Change-Id: I7c1c84d61b59061fec98abaaeab6becd06537dee Reviewed-on: https://gem5-review.googlesource.com/7204 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20base: Rework bitunions so they can be more flexible.Gabe Black
They are now oriented around a class which makes it easy to provide custom setter/getter functions which let you set or read bits in an arbitrary way. Future additions may add the ability to add custom bitfield methods, and index-able bitfields. Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333 Reviewed-on: https://gem5-review.googlesource.com/7201 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-20sim, arch, base: Refactor the base remote GDB class.Gabe Black
Fold the GDBListener class into the main BaseRemoteGDB class, move around a bunch of functions, convert a lot of internal functions to be private, move some functions into the .cc, make some functions non-virtual which didn't really need to be overridden. Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d Reviewed-on: https://gem5-review.googlesource.com/7422 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-19arch, mem, sim: Consolidate and rename the SE mode page table classes.Gabe Black
Now that Nothing inherits from PageTableBase directly, it can be merged into FuncPageTable. This change also takes the opportunity to rename the combined class to EmulationPageTable which lets you know that it's specifically for SE mode. Also remove the page table entry cache since it doesn't seem to actually improve performance. The TLBs likely absorb the majority of the locality, essentially acting like a cache like they would in real hardware. Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13 Reviewed-on: https://gem5-review.googlesource.com/7342 Reviewed-by: Brandon Potter <Brandon.Potter@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-16arch-riscv: Fix floating-poing op classesAlec Roelke
This patch applies correct miscellaneous or multiply-accumulate op classes to floating point instructions which had previously been incorrectly classed as add or multiply instructions. Change-Id: I959dd8d3152aa341e0f060b003ce1da8c4d688fb Reviewed-on: https://gem5-review.googlesource.com/6521 Reviewed-by: Alec Roelke <ar4jc@virginia.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-16arch-riscv: Fix floating-point conversion bugsAlec Roelke
Using the fetestexcept function to check for specific types of floating point exceptions is unreliable for some kinds of floating-point-to-integer conversion operations. RISC-V code used to make use of them to check for some exceptional cases like overflow and underflow, which caused incorrect output when compiler optimization is turned on. This patch changes the use of fetestexcept to explicit checks for those exceptional cases. Change-Id: Id983906ea0664dc246e115a9e470d9ab7733bde1 Reviewed-on: https://gem5-review.googlesource.com/6402 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-15arch: Fix a fatal_if in most of the arch's process classes.Gabe Black
When switching an assert to a fatal while addressing recent review feedback, I forgot to reverse the polarity of the condition, making the fatal fire in exactly the opposite of the conditions it was meant to. Change-Id: Icf49864ef449052bbb0d427dca786006166575c4 Reviewed-on: https://gem5-review.googlesource.com/7381 Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-01-11arch-riscv: Don't crash when printing unknown CSRsAlec Roelke
This patch fixes a potential crash if an unnamed CSR is accessed and debug flags are enabled that print disassembly. Unknown CSRs will be identified as "??" followed by the address that was used. Change-Id: If5ac57f1422bd59c72a1a06206fa9d9dc05d21ef Reviewed-on: https://gem5-review.googlesource.com/7321 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-11arm, power: Make the python TLB simobjects inherit from BaseTLB.Gabe Black
These were still inheriting from SimObject instead of BaseTLB, making them incompatible with parameters which expect a BaseTLB. Change-Id: I05115cc5515f745fdeb85e4dea8eded613647e40 Reviewed-on: https://gem5-review.googlesource.com/7348 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-11arch,mem: Remove the default value for page size.Gabe Black
This breaks one more architecture dependence outside of the ISAs. Change-Id: I071f9ed73aef78e1cd1752247c183e30854b2d28 Reviewed-on: https://gem5-review.googlesource.com/6982 Maintainer: Gabe Black <gabeblack@google.com> Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2018-01-11arch,mem: Move page table construction into the arch classes.Gabe Black
This gets rid of an awkward NoArchPageTable class, and also gives the arch a place to inject ISA specific parameters (specifically page size) without having to have TheISA:: in the generic version of these types. Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441 Reviewed-on: https://gem5-review.googlesource.com/6981 Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-10style: change C/C++ source permissions to noexecBKP
Several files in the repository were tracked with execute permissions even though the files are just normal C/C++ files (and the one .isa). Change-Id: I976b096acab4a1fc74c5699ef1f9b222c1e635c2 Reviewed-on: https://gem5-review.googlesource.com/7241 Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-10arch-riscv: Make use of ImmOp's polymorphismAlec Roelke
This patch makes use of ImmOp's polymorphism to remove unnecessary casting from the implementations of arithmetic instructions with immediate operands and to remove the CUIOp format by combining it with the CIOp format (compressed arithmetic instructions with immediate operands). Interestingly, RISC-V specifies that instructions with unsigned immediate operands still need to sign-extend the immediates from 12 (or 20) bits to 64 bits, so that is left alone. Change-Id: If20d70c1e90f379b9ed8a4155b2b9222b6defe16 Reviewed-on: https://gem5-review.googlesource.com/6401 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tuan Ta <qtt2@cornell.edu> Maintainer: Alec Roelke <ar4jc@virginia.edu>
2018-01-10alpha,arm,mips,power,riscv,sparc,x86,cpu: Get rid of ISA_HAS_DELAY_SLOT.Gabe Black
This constant is, first, a #define, and second only used in one place. In that one place, it appears that the code it guards is no longer necessary in general. It was originally written to avoid refetching a block of data that you're still in, even if you've moved slightly farther in it because you're skipping the next instruction due to an annulled branch delay slot. In reality however, in SPARC, the one ISA I'm aware of which has this sort of branching behavior, the PC state object will correctly determine that no branch is happening in these cases. Code lower down in the loop will then recompute where fetching should continue based on the next PC, automatically skipping the annulled branch slot without misinterpretting the gap as a branch. This change therefore also removes this block of code. Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c Reviewed-on: https://gem5-review.googlesource.com/6821 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-01-09cpu, power: Get rid of the remnants of the EA computation insts.Gabe Black
Get rid of some remnants of a system which was intended to separate address computation into its own instruction object. Change-Id: I23f9ffd70fcb89a8ea5bbb934507fb00da9a0b7f Reviewed-on: https://gem5-review.googlesource.com/7122 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-09arm: Make translateFunctional override the base implementation.Gabe Black
Now that translateFunctional is a virtual function, having an extra parameter with a default value makes the compiler fall through to the base implementation instead of overriding it. This change removes the default value for the extra parameter, and adds a small wrapper with the correct signature which overrides the base implementation and calls the full version with the previously default value for the extra parameter. To callers this will look like the same thing, but the the right function will get called. This was what was already being done for transateAtomic and translateTiming. Change-Id: I0b71adf34fd6f326005edbb8eaac93275b437c55 Reviewed-on: https://gem5-review.googlesource.com/7121 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Gabe Black <gabeblack@google.com>
2018-01-05arch-riscv: Ignore sched_yield syscall in SE modeTuan Ta
Change-Id: I14f22c06eb8fdbe063980b4cd0a49387b9113a97 Reviewed-on: https://gem5-review.googlesource.com/6961 Maintainer: Brandon Potter <Brandon.Potter@amd.com> Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 07:53:56 +0000