Age | Commit message (Collapse) | Author |
|
CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.
This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.
The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.
A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.
Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes the WFx trapping behaviour by introducing the arm arm
v8 pseudocode functions: checkForWFxTrap32 and checkForWFxTrap64
Change-Id: I3db0d78b5c4ad46860e6d199c2f2fc7b41842840
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6622
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If undefined instruction has to be routed to EL2, the HSR register
must change the HSR.EC and HSR.ISS accordingly, which means not using
the EL1 exception syndrome, but the unknown reason one (EC=0, ISS=0)
Change-Id: I1540c713ab545bf307c1dad3ae305de4178443f4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6621
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The previously introduced method was missing the machInst value
to be masked.
Change-Id: Ic722f7cc2abc680da1a1f19c08299338b5c859a6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6881
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is introducing some methods in StaticInst so that is possible
to get the instruction size in byte of the instruction (can be 2 bytes
in Thumb) and the correct opcode (The machInst field contains some
appended metadata)
Change-Id: I3bed4d9fd7c77feaeded40ded192afe445d306ea
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6781
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Cosmetic fix: prefer static_cast rather than reinterpret_cast in
hierarchy.
Change-Id: Ic0e5a4df9b18072a6df5ee316f674241074c349a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6761
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
According to the getauxval(3) man page, the AT_RANDOM aux value should
be a pointer to 16 random bytes. In the initial implementation of
RISC-V, this was based on spike's program stack setup, which copied the
program header table there instead. This patch changes the
implementation to use the proper 16 random bytes, making it compatible
with some RISC-V programs that use custom linker scripts.
Change-Id: Idaae7f19bf3ed3fd06d293e5e9c0b6f778270eb2
Reviewed-on: https://gem5-review.googlesource.com/6681
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch increases the maximum stack size of RISC-V, which should help
to reduce problems with programs that allocate large amounts of data on
the stack or do many small allocations.
Change-Id: I1d760050229b12f01a4a8f24c047b587299fef6d
Reviewed-on: https://gem5-review.googlesource.com/6661
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
This means the instruction is treated as cmpxchg8b when the effective
operand size is 16 bits.
Change-Id: I4d9bb295f96097e1746a9bbccb2c579d14738fab
Reviewed-on: https://gem5-review.googlesource.com/6603
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Replace them with std::array<>s.
Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34
Reviewed-on: https://gem5-review.googlesource.com/6602
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Neither of these were used, particularly memAccInst.
Change-Id: I4ac9e44cf624e5de42519d586d7b699f08a2cdfc
Reviewed-on: https://gem5-review.googlesource.com/6601
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Explicitly separate the way the data is represented in the underlying
representation from how it's represented in the instruction.
In order to make the ISA parser happy, the Mem operand needs to have
a single, particular type. To handle that with scalar types, we just
used uint64_ts and then worked with values that were smaller than the
maximum we could hold. To work with these new array values, we also
use an underlying uint64_t for each element.
To make accessing the underlying memory system more natural, when we
go to actually read or write values, we translate the access into an
array of the actual, correct underlying type. That way we don't have
non-exact asserts which confuse gcc, or weird endianness conversion
which assumes that the data should be flipped 8 bytes at a time.
Because the functions involved are generally inline, the syntactic
niceness should all boil off, and the final implementation in the
binary should be simple and efficient for the given data types.
Change-Id: I14ce7a2fe0dc2cbaf6ad4a0d19f743c45ee78e26
Reviewed-on: https://gem5-review.googlesource.com/6582
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch corrects the TPIDRURO and TPIDRURW access flags: TPIDRURO is
now readable in secure user mode, an TPIDRURW is readable and writable
in secure user mode.
Change-Id: I6293d9a3bcc7adc0f655bf98d29aca51eca5a002
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6381
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Print faulting instruction for unmapped address panic in faults.cc
and print extra info about corresponding fetched PC in base.cc.
Change-Id: Id9e15d3e88df2ad6b809fb3cf9f6ae97e9e97e0f
Reviewed-on: https://gem5-review.googlesource.com/6461
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch moves static portions of the compressed instruction
definitions out of the ISA generated code.
Change-Id: I61daae8b8c03a9e0f012790a132aa4d34a6ec296
Reviewed-on: https://gem5-review.googlesource.com/6026
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
The FSW and TOP values are technically part of the same register, but
they have very different behaviors. One of them can be renamed and
float along without affecting global state, while the other requires
serialization. They just need to *look* like the same register when
read by the user.
Also, there was a missing break in setMiscRegNoEffect.
Change-Id: If58de0f566f65068208240f4001209fb9e1826d6
Reviewed-on: https://gem5-review.googlesource.com/6441
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The microcode for those instructions needs a directive which overrides
that setting in the instructions emulation environment.
Reported-by: Matt Sinclair <mattdsinclair@gmail.com>
Change-Id: I474d938c0b3cf01da92ec817a58b08de783f1967
Reviewed-on: https://gem5-review.googlesource.com/6301
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch adds support for decoding and executing the following ARMv8
cache maintenance instructions by Virtual Address:
* dc civac: Clean and Invalidate by Virtual Address to the Point
of Coherency
* dc cvac: Clean by Virtual Address to the Point of Coherency
* dc cvau: Clean by Virtual Address to the Point of Unification
* dc ivac: Invalidate by Virtual Addrsess to the Point of Coherency
Change-Id: I58cabda37f9636105fda1b1e84a0a04965fb5670
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5060
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds support for the ARMv7 cache maintenance
intructions:
* mcr dccmvac cleans a VA to the PoC
* mcr dcimvac invalidates a VA to the PoC
* mcr dccimvac cleans and invalidates a VA to the PoC
* mcr dccmvau cleans a VA to the PoU
Change-Id: I6511f203039ca145cc9128ddf61d09d6d7e40c10
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5059
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Cache Maintainance operations to the point of coherence are treated as
normal cahceable requests and clean and/or invalidate the caches of
all PEs.
Change-Id: Ia4a749c2318fe29c8601848b034b8315c4186c8a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5056
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Arm security extension introduced register banking between secure and
non-secure mode. This has been removed in armv8 using AArch64 in EL3,
where the decoded register is by default the non-secure version. Using
non-secure register infos(flags) was preventing secure execution to
access the register with the MRC/MCR at EL1.
The patch updates the following banked registers' flags so that their
non-secure version can be accessed in secure mode:
MISCREG_CSSELR, MISCREG_SCTLR, MISCREG_ACTLR, MISCREG_TTBR0,
MISCREG_TTBR1, MISCREG_TTBCR, MISCREG_DACR, MISCREG_DFSR, MISCREG_IFSR,
MISCREG_ADFSR, MISCREG_AIFSR, MISCREG_DFAR, MISCREG_IFAR, MISCREG_PAR,
MISCREG_PRRR, MISCREG_MAIR0, MISCREG_NMRR, MISCREG_MAIR1,
MISCREG_AMAIR0, MISCREG_AMAIR1, MISCREG_VBAR, MISCREG_CONTEXTIDR,
MISCREG_TPIDRURW, MISCREG_TPIDRURO, MISCREG_TPIDRPRW, MISCREG_CNTP_TVAL,
MISCREG_CNTP_CTL, MISCREG_CNTP_CVAL
For those registers the following permission bits have been set:
MISCREG_PRI_S_RD
MISCREG_PRI_S_WR
Change-Id: Ib881c526e75d69e313f8ef66eb78fc704de6bf59
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6201
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Replace manual creation of masks for sign extension of immediates with
the sext<N> function.
Change-Id: Ief2df91a25500c64f5bcae0dcd437c1e3bb95e6c
Reviewed-on: https://gem5-review.googlesource.com/6182
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch makes mem.isa conform to style guidelines better by removing
spaces around the "ea_code" argument default value assignment of the
Load format.
Change-Id: I1c62b99de3617a3734b128b00fb421773e021317
Reviewed-on: https://gem5-review.googlesource.com/6181
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
Some of the files in earlier patches rearranging instruction definitions
were missing copyright and license information. This patch adds them.
Change-Id: I2ac4910a415de6032fc0b7d4422904c682e0ad87
Reviewed-on: https://gem5-review.googlesource.com/6183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch removes the static parts of the RISC-V atomic memory
instructions out of the ISA generated code and into arch/riscv/insts. It
also makes the LR and SC instructions subclasses of MemInst from
arch/riscv/insts/mem.hh.
Change-Id: I6591f3d171045c4f1b457eb1264bbb7bd62b3e51
Reviewed-on: https://gem5-review.googlesource.com/6025
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch moves static portions of the memory instructions out of the
ISA generated code and puts them into arch/riscv/insts. It also
simplifies the definitions of load and store instructions by giving
them a common base class.
Change-Id: Ic6930cbfc6bb02e4b3477521e57b093eac0c8803
Reviewed-on: https://gem5-review.googlesource.com/6024
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch removes the Unknown instruction type out of the ISA generated
code and puts it into arch/riscv/insts. Since there isn't any dynamic
behavior to it, all that's left behind is a template for creating a new
Unknown instruction.
Change-Id: If7c3258a24ecadd3e00ab74586e1740e14f028db
Reviewed-on: https://gem5-review.googlesource.com/6023
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch removes static portions of the standard instruction types
from the generated ISA code and puts them into arch/riscv/insts. Some
dynamically-generated content is left behind for each individual
instruction's implementation. Also, BranchOp is removed due to its
similarity with ImmOp and ImmOp and UImmOp are joined into a single
templated class, ImmOp<T>.
Change-Id: I1bf47c8b8a92a5be74a50909fcc51d8551185a2a
Reviewed-on: https://gem5-review.googlesource.com/6022
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
This patch introduces the ARM pseudocode haveEL function
into gem5.
Change-Id: I0d96070959e8e13773eb7fa9964894ec0ff2cac2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6162
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
We sometimes need to cast the System pointer stored in a
ThreadContext to an ArmSystem pointer to query global
system setting.
Add an assertion to make sure that the cast resulted in a
valid pointer.
Change-Id: Id382d0c1dceefee8f74d070c205c7b43b83ab215
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6161
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch creates an "insts" directory in src/arch/riscv to store
static portions of instruction definitions that aren't part of the code
generated by the ISA description. It serves as a starting point for
future patches to simplify the ISA description.
Change-Id: I6700522143f6fa6c9b18a30e1fbdc8f80cdc7afa
Reviewed-on: https://gem5-review.googlesource.com/6021
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
Add support for software breakpoints as signalled by the aarch64 brk
instruction. This introduces a new SoftwareBreakpoint fault.
Change-Id: I93646c3298e09d7f7b0983108ba8937c7331297a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5721
Reviewed-by: Giacomo Gabrielli <Giacomo.Gabrielli@arm.com>
|
|
Since EL2 is not available in secure mode, any HVC call from secure mode
should be treated as undefined. This behaviour was implemented in
aarch32 HVC but not in 64 bit version
Change-Id: Ibaa4d8b1e8fe01d2ba3ef07494c09a4d3e7e87b0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5921
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds all system calls present in riscv-gnu-toolchain at
commit hash 65cb174. Many of them do not have implementations in gem5, so
they are just placeholders.
[Remove the variadic macro and replace it with a function that has
default arguments because variadic macros may not be portable across
compilers]
[Remove spaces around default arguments of createSyscall for better
style]
[Switch from using a loose function to using SyscallDesc's new
constructor]
Change-Id: Iff97c689109121b39df423c72d0e79c6366e31b9
Reviewed-on: https://gem5-review.googlesource.com/5322
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
Change-Id: I24008c1e2a94ad8dc4cc13739214928eb846a496
Reviewed-on: https://gem5-review.googlesource.com/5483
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: Ifbeee464e2d7f872e192f065ad3494f52d274596
Reviewed-on: https://gem5-review.googlesource.com/5482
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These were just raw C++ classes.
Change-Id: Id2101400d885c6938efb6b94f2949722cfbb94ae
Reviewed-on: https://gem5-review.googlesource.com/5481
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These had been marked as non-speculative so that their execute
functions would only be called if the instruction should really be
executed. Instead, we can return faults which will cause the same
behavior when the instruction is committed and let the instruction
execute as normal.
Change-Id: I39fa5073e93399424144724b99bdc12070e42286
Reviewed-on: https://gem5-review.googlesource.com/5465
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These are simple classes which don't need to be in the ISA description.
Change-Id: Ia0bb45f50c4da2536855efcb3c17c7780b431332
Reviewed-on: https://gem5-review.googlesource.com/5464
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The only thing the Unknown format does is return an instance of this
class, so there's no reason to have it in the ISA description.
Change-Id: I3f8187b1450a8622a974c030c0cb552b26f6b5f0
Reviewed-on: https://gem5-review.googlesource.com/5463
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The Nop format mostly just made instructions that inherited from the
Nop base class but with different mnemonics, so there doesn't need
to be very much dynamic content.
Change-Id: I1cf5e25ca8372f9b71f56d49756879c7545c9f6c
Reviewed-on: https://gem5-review.googlesource.com/5462
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These are for the trap and branch instructions.
Change-Id: Idedab6f3e6c6c954c1f8a36dae52976cf25ad394
Reviewed-on: https://gem5-review.googlesource.com/5461
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These classes are just used as base classes for other instructions
and don't need to be part of the ISA definition. Pull them into
standard C++ files.
Change-Id: If3e0bd82b1e676f20459bc0293fbda49de66b554
Reviewed-on: https://gem5-review.googlesource.com/5422
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change the definition of PMU events in order to integrate events not
cannot easily be represented by probe points. The software
increment event is now defined as a special type with its separate
implementation in pmu.cc and pmu.hh.
Change-Id: I43874b9641bf38c54f6ba2c26386542b6a73e282
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5764
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I09531e9992e045254e5ee989dd11ccabbf84e4ce
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5763
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the Aarch32 MCR/MRC disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the coprocessor register name
Change-Id: I1937938c43680200cf6c5c9558e835ce2b209adc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5862
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the Aarch64 MSR/MRS disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the system register name
Change-Id: Iac9d5f2f2fea85abd9a398320ef7aa4844d43c0e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5861
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Events were not being attached to counters after a checkpoint resume.
By not storing the enable private variable from the stored state the
recreation of the event to counter association is automatically carried.
The enable state is stored in the reg_pmcnten.
Change-Id: I46344df0882a9050c900efb2e8996d64dbfbf297
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|