| Age | Commit message (Collapse) | Author |
|---|
|
AddrRange does not attempt to merge interleaved address ranges if it
has only one of the ranges.
This is needed to allow XBars to accept request targeting only one
part of a interleaved address range. A use case for this would be
modeling distributed LLCs in which a XBar is used solely to
encapsulate the snoop filter of a single LLC slice.
Change-Id: If71c9cf1444ee11916611afb51eab3a4f1d93985
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18788
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: Ia154c3a17c3c8254a0e3d622568ac34f0d62fc9e
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19131
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Previously an AddrRange could express interleaving using a number of
consecutive bits and in additional optionally a second number of
consecutive bits. The two sets of consecutive bits would be xored and
matched against a value to determine if an address is in the
AddrRange. For example:
sel[0] = a[8] ^ a[12]
sel[1] = a[9] ^ a[13]
where sel == intlvMatch
This change extends AddrRange to allow more flexible interleavings
with an abritary number of set of bits which do not need be
consecutive. For example:
sel[0] = a[8] ^ a[11] ^ a[13]
sel[1] = a[15] ^ a[17] ^ a[19]
where sel == intlvMatch
Change-Id: I42220a6d5011a31f0560535762a25bfc823c3ebb
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19130
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
The implementation of ctz32 uses __builtin_ctz to count the number of
trailing zeros and therefore makes the assumption that an unsigned int
is 32bit. This change checks whether that's the case and if not it
uses __builtin_ctzl instead.
Change-Id: Ic3ed3ada25fd0a93c7eb91d75b954e9924bdbb77
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19129
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: Iaad0679b403bc5015ffeacbf7284313e41a36cd0
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19128
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This can be used to check if the fiber has started its execution.
Change-Id: Ie9222b8076756363c9f82c1333c76a352bcaf817
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18648
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This is done since TestFiber is too generic and it is not the only
Fiber's testing subclass in the unit test
Change-Id: Idc386f487091ae9bdadae865090a6719a25583da
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19153
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
CircularQueue is currently throwing compilation errors when creating
a derived class.
assert() needs <cassert>
ptrdiff_t needs <cstddef>
(u)intX_t need <cstdint>
random_access_iterator_tag needs <iterator>
is_same, enable_if and others need <type_traits>
Change-Id: I77a78e7b13f7a8b8e7e8b2b872065d78d1ab815a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19089
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
These two functions were performing the same function but had two
different names for historical reasons. This change merges them
together, keeping the getVirtProxy name to be consistent with the
getPhysProxy method used to get a non-translating proxy port.
Change-Id: Idd83c6b899f9343795075b030ccbc723a79e52a4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18581
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Al(most) all of the interesting differences between the two classes
have been removed. There are some control methods which are still
specific to each type which may require treating them as their true
type, but most code that consumes them doesn't need to worry about
which is which.
Change-Id: Ie592676f1e496c7940605b66e55cd7fae18e59d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18577
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This expands those functions into code which extracts the virt proxy
and then uses the appropriate method on it. This has two benefits.
First, the Copy* functions where mostly redundant wrappers around the
methods the proxy port already had. Second, using them forced a
particular port which might not actually be what the user wanted.
Change-Id: I62084631dd080061e3c74997125164f40da2d77c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18575
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The port proxy can be declared as a reference to a const proxy
rather than just a reference to a proxy.
Change-Id: I4640b0c5f33e2334c1e7630131f78607ced40a34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12301
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ia73b2d86a10d02fa09c924a4571477bb5f200eb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18572
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Ie68f3b07a35ed2e6b0eee20b3b34050542fcdc6c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18420
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This avoids having a big pile of #if-s in sim/process.cc and allows
dynamically adding new types of object file loaders which might
recognize new arch/OS combinations.
Change-Id: Ie3b9c1aa2974d30a61afc4fcc529ffd6a74d43e0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18583
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This code will be preserved through version control, but otherwise
creates clutter and will rot in place since it's never compiled.
Change-Id: Id265f6deac445116843956ea5cf1210d8127274e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18608
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Add shift, add and subtract assignment operators, as well as
copy and move constructor and assignments to SatCounter, so
that it they can be used by the prefetchers.
Also add extra useful functions to calculate saturation
oercentile so that the instantiator does not need to be aware
of the counter's maximum value.
Change-Id: I61d0cb28c8375b9d2774a39011e4a0aa6fe9ccb7
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17996
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Add a GTest to the SatCounter class.
Change-Id: Iaf1b18db9fe8d7fe32e0e40c7947dcd1fd6cc33b
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17994
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Saturating counters are used by many objects, not only
the cpu predictors. Therefore, move the class to the
base folder so that it can be more easily used.
Change-Id: I26f799324bdd8720ab8834c72a2002149cee777c
Signed-off-by: Daniel <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17993
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Clang with -Wconstant-conversion is _very_ restrictive on casting.
The shift operator results in an incorrect promotion.
This patch add a compile-time static cast that remove the error
when clang is used.
Change-Id: I3aa1e77da2565799feadc32317d5faa111b2de86
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17308
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The erase() method only accepts regular iterators which is consistent
with the normal STL map, but the existing find() only returns const
iterators. The STL container can return either depending on if "this"
is const.
Unfortunately there isn't a great way to have only one find
implementation which returns the right type of iterator under the right
conditions. Also, it's not possible to turn a const_iterator into an
iterator, but it is possible to go the other way. This change
duplicates very short functions which return iterators, and for find
does the only thing I could find which avoids having to copy that
whole large function.
Change-Id: I2f789b5d0881feb9adff9978bd40e31731c6a688
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17588
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When adding multiple SimObjects to --debug-ignore, either separating the values with
a colon or adding multiple --debug-ignore flags, the previous code only ignored the
last SimObject in the list. This changeset adds and uses new `ObjectMatch::add` and
`Logger::addIgnore` methods to make the functionality of the flag consistent with
its description.
Change-Id: Ib6967a48611ea59a211f81af2a970c4de429b1be
Signed-off-by: Isaac Sánchez Barrera <isaac.sanchez@bsc.es>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17488
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Using operator-= when the rhs is a negative value is equivalent
to using += on -rhs. This is fixing rounding in that scenario.
Change-Id: Ia22e51f81a6805d27fd6b2115d288bb23421d00f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17528
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing CircularQueue iterators' subtraction, in particular
the behaviour when head and tail round multiple times.
Change-Id: Ie79ac8accd30a10cf039cf4def87675b01375d6b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17188
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Creating an extra version of string to number converters (__to_number)
in base/str.hh; it will be used by enums only when unserializing
them. The reason not to have a single helper for both enums and
integers is that std::numeric_limits trait is not specialized for enums.
We fix this by using the std::underlying_type trait.
Change-Id: I819e35c0df8c094de7b7a6390152964fa47d513d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16382
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
This patch splits up the riscv SE mode support for 32 and 64-bit.
A future patch will add support for decoding rv32 instructions.
Change-Id: Ia79ae19f753caf94dc7e5830a6630efb94b419d7
Signed-off-by: Austin Harris <austinharris@utexas.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/15355
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
|
|
This type is no longer used since FP registers are accessed as integer
bit patterns.
Change-Id: I1070f9443d6247165fd64c6bc041811c28287e9f
Reviewed-on: https://gem5-review.googlesource.com/c/14459
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch does a large modification of the LSQ in the O3 model. The
main goal of the patch is to remove the 'an operation can be served with
one or two memory requests' assumption that is present in the LSQ
and the instruction with the req, reqLow, reqHigh triplet, and
generalising it to operations that can be addressed with one request,
and operations that require many requests, embodied in the
SingleDataRequest and the SplitDataRequest.
This modification has been done mimicking the minor model to an extent,
shifting the responsibilities of dealing with VtoP translation and
tracking the status and resources from the DynInst to the LSQ via the
LSQRequest. The LSQRequest models the information concerning the
operation, handles the creation of fragments for translation and request
as well as assembling/splitting the data accordingly.
With this modifications, the implementation of vector ISAs, particularly
on the memory side, become more rich, as the new model permits a
dissociation of the ISA characteristics as vector length, from the
microarchitectural characteristics that govern how contiguous loads are
executing, allowing exploration of different LSQ to DL1 bus widths to
understand the tradeoffs in complexity and performance.
Part of the complexities introduced stem from the fact that gem5 keeps a
large amount of metadata regarding, in particular, memory operations,
thus, when an instruction is squashed while some operation as TLB lookup
or cache access is ongoing, when the relevant structure communicates to
the LSQ that the operation is over, it tries to access some pieces of
data that should have died when the instruction is squashed, leading to
asserts, panics, or memory corruption. To ensure the correct behaviour,
the LSQRequest rely on assesing who is their owner, and self-destroying
if they detect their owner is done with the request, and there will be
no subsequent action. For example, in the case of an instruction
squashed whal the TLB is doing a walk to serve the translation, when the
translation is served by the TLB, the LSQRequest detects that the
instruction was squashed, and as the translation is done, no one else
expect to access its information, and therefore, it self-destructs.
Having destroyed the LSQRequest earlier, would lead to wrong behaviour
as the TLB walk may access some fields of it.
Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
Change-Id: I9578a1a3f6b899c390cdd886856a24db68ff7d0c
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13516
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
This is done by implementing the Xfer:features:read packet of the GDB
remote protocol.
Before this commit, gem5 used the defaults of the GDB client.
With this commit, gem5 can inform the client which registers it knows
about. This allows in particular to support new registers which an older
GDB client does not yet know about.
The XML is not implemented in this commit for any arch, and falls back
almost exactly to previous behaviour. The only change is that now gem5
replies to the Supported: request which the GDB clients sends at the
beginning of the transaction with an empty feature list containing only
the mandatory PacketSize= argument.
Since the feature list does not contain qXfer:features:read, the GDB
client knows that the gem5 server does support the XML format and uses
its default registers as before.
Change-Id: I5185f28b00e9b9cc8245f4b4262cc324c3d298c1
Reviewed-on: https://gem5-review.googlesource.com/c/15137
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ib0067fc743f84ff7be9f12d2fc33ddf63736bdd1
Reviewed-on: https://gem5-review.googlesource.com/c/13436
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The __to_number helper function defined in base/str.hh is used by
unserializing code. Its purpose is to convert a string into an
integral/floating point number. Since enums underlying type can only be
an integer type, it makes sense to extend the helper function for enums
as well. In this way it will be possible to unserialize Enums and
containers of Enums without the need of casting.
Change-Id: I74069cc4c04ec8b5eb80939acea7ab18fb366dd4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15336
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the following issues:
- base: typename should be used only for types
- systemc: 'GCC_VERSION' is not defined for clang
Change-Id: I27c94445d65691a08a0a14a0ffe6b6942f6c455f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14976
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Ported the existing circlebuf on top of the CircularQueue to condense
shared functionality and minimise code/functionality replication.
Additional contributors: Gabor Dozsa.
Change-Id: Ib4e67c638f0fb66b54cef77007a03439218bda7f
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13128
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
The former implementation of CircleBuf is functional but a bit too
tailored to match a use-case. This patches introduces a new iterable
circular queue, which adds some more functionality so it can also be
used for the newer LSQ implementation, where iteration and iterators
are a very desirable feature.
Additional contributors: Gabor Dozsa.
Change-Id: I5cfb95c8abc1f5e566a114acdbf23fc52a38ce5e
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13127
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
Mac OS has deprecated the use of ucontext and at the moment we are
using a workaround to enable it. A side-effect is that the code is
marked as _POSIX_C_SOURCE and consequently <sys/mman.h> requires the
code to be also marked as _DARWIN_C_SOURCE to include the definition
of MAP_ANONYMOUS.
Change-Id: I65550d11a0a21cd36d832a7de6320e7e3f332a9d
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14817
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Derived classes with virtual functions need to define a virtual
destructor or a protected destructor otherwise calling the base class
destructor has undefined behavior. This change adds a virtual
distructor in the base class.
Change-Id: I1c855aa56dff6585ff99b9147bdb4eb9729a0a53
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14815
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Ied2204566a8fc5c34fb4702301051b8e5ab84ffe
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13717
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The size was not large enough for the 'G' packet on aarch64, which the
client sends to set registers.
This would lead to the stub not to be able to find the end of the input
packet and keep waiting forever.
Change-Id: Icb149f15a6c769371ebcb6ec5fbebc6170c31fc6
Reviewed-on: https://gem5-review.googlesource.com/c/14497
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Most tests were named *test where * was the base name of the file being
tested, but some were named differently based on, for instance, the
name of the class that file implemented.
This change makes all the test names consistently based off of the file
name they test, and also brings in the new .test convention to make
them easier to read.
Now, if you have a file like fiber.cc you want to test, you'd have a
unit test in a file called fiber.test.cc, and a test called fiber.test
which would generate a binary called fiber.test.opt, fiber.test.debug,
etc.
Change-Id: I61d59016090371a9bae72066e7473a34aecea21f
Reviewed-on: https://gem5-review.googlesource.com/c/14677
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This makes the name easier to read, looks ok if the file is named with
underscores between words or not, is easy to grep for, and shouldn't
introduce any ambiguities in the file names.
Change-Id: I34b7bcccea2d87c10c0de417dd5e3ef27c4b5666
Reviewed-on: https://gem5-review.googlesource.com/c/14676
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Even though gtest.h is a C++ header, it looks like a C header which
makes the style check hook upset. Lets move it up so the hook doesn't
complain when the file is changed.
Change-Id: Ibcc2d0b7bf3b254c70e55b30379ebd4b70933c26
Reviewed-on: https://gem5-review.googlesource.com/c/14675
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Id5ee2a970a3dceee1b7e24ce3b452b7fece87875
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14619
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I47d6c9cbae21877420a15ffcf8489e3c26959139
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14615
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.
This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.
Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
These make it easier to extract the binary representation of floats and
doubles, and given a binary representation convert it back again.
The versions with a size prefix are safer to use since they make it
clear what size inputs/outputs are expected. The versions without are
to make writing generic code easier in case the same code snippet,
templated function, etc., needs to be applied in both circumstances.
Change-Id: Ib1f35a7e88e00806a7c639c211c5699b4af5a472
Reviewed-on: https://gem5-review.googlesource.com/c/14455
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This function catches a couple types of exceptions the functions it
calls might throw, but if one that it doesn't catch is thrown, then
it will propogate that exception to its own callers, and not initialize
the value it was asked to convert.
This might be considered desirable behavior since it lets errors
propogate and avoids handling them in code that might not know the
context of when it's called. On the other hand, it upsets g++ since it
thinks that there might be an uninitialized value used elsewhere, even
though that value will only be uninitialized if an exception is
propogating, and the code that would use it is after a point where that
exception would have been caught and execution would have resumed.
To satisfy g++ and to also avoid silently hiding errors, this change
adds a catch all which will panic if an unexpected exception is raised.
Change-Id: Ie94dcef3a50f7902566328a3fa2eac59b3cf9aad
Reviewed-on: https://gem5-review.googlesource.com/c/14399
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This will help detect stack overflow for fibers.
Change-Id: Iff2b102120ec351709e495291d6bead597f8d10c
Reviewed-on: https://gem5-review.googlesource.com/c/14395
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Summary: Usage of const DynInstPtr& when possible and introduction of
move operators to RefCountingPtr.
In many places, scoped references to dynamic instructions do a copy of
the DynInstPtr when a reference would do. This is detrimental to
performance. On top of that, in case there is a need for reference
tracking for debugging, the redundant copies make the process much more
painful than it already is.
Also, from the theoretical point of view, a function/method that
defines a convenience name to access an instruction should not be
considered an owner of the data, i.e., doing a copy and not a reference
is not justified.
On a related topic, C++11 introduces move semantics, and those are
useful when, for example, there is a class modelling a HW structure that
contains a list, and has a getHeadOfList function, to prevent doing a
copy to an internal variable -> update pointer, remove from the list ->
update pointer, return value making a copy to the assined variable ->
update pointer, destroy the returned value -> update pointer.
Change-Id: I3bb46c20ef23b6873b469fd22befb251ac44d2f6
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13105
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
These should be used instead of the ISA specific ones, and should be
at least as large as the largest primitive register type in all the
ISAs.
Change-Id: Iaac104eef74eabcdd87787b1cdf8bea22d449eda
Reviewed-on: https://gem5-review.googlesource.com/c/13615
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
