summaryrefslogtreecommitdiff
path: root/src/cpu/base.hh
AgeCommit message (Collapse)Author
2013-04-22kvm: Avoid synchronizing the TC on every KVM exitAndreas Sandberg
Reduce the number of KVM->TC synchronizations by overloading the getContext() method and only request an update when the TC is requested as opposed to every time KVM returns to gem5.
2013-03-26cpu: Remove CpuPort and use MasterPort in the CPU classesAndreas Hansson
This patch changes the port in the CPU classes to use MasterPort instead of the derived CpuPort. The functions of the CpuPort are now distributed across the relevant subclasses. The port accessor functions (getInstPort and getDataPort) now return a MasterPort instead of a CpuPort. This simplifies creating derivative CPUs that do not use the CpuPort.
2013-02-15cpu: Refactor memory system checksAndreas Sandberg
CPUs need to test that the memory system is in the right mode in two places, when the CPU is initialized (unless it's switched out) and on a drainResume(). This led to some code duplication in the CPU models. This changeset introduces the verifyMemoryMode() method which is called by BaseCPU::init() if the CPU isn't switched out. The individual CPU models are responsible for calling this method when resuming from a drain as this code is CPU model specific.
2013-01-07cpu: Unify the serialization code for all of the CPU modelsAndreas Sandberg
Cleanup the serialization code for the simple CPUs and the O3 CPU. The CPU-specific code has been replaced with a (un)serializeThread that serializes the thread state / context of a specific thread. Assuming that the thread state class uses the CPU-specific thread state uses the base thread state serialization code, this allows us to restore a checkpoint with any of the CPU models.
2013-01-07cpu: Flush TLBs on switchOut()Andreas Sandberg
This changeset inserts a TLB flush in BaseCPU::switchOut to prevent stale translations when doing repeated switching. Additionally, the TLB flushing functionality is exported to the Python to make debugging of switching/checkpointing easier. A simulation script will typically use the TLB flushing functionality to generate a reference trace. The following sequence can be used to simulate a handover (this depends on how drain is implemented, but is generally the case) between identically configured CPU models: m5.drain(test_sys) [ cpu.flushTLBs() for cpu in test_sys.cpu ] m5.resume(test_sys) The generated trace should normally be identical to a trace generated when switching between identically configured CPU models or checkpointing and resuming.
2013-01-07cpu: Introduce sanity checks when switching between CPUsAndreas Sandberg
This patch introduces the following sanity checks when switching between CPUs: * Check that the set of new and old CPUs do not overlap. Having an overlap between the set of new CPUs and the set of old CPUs is currently not supported. Doing such a switch used to result in the following assertion error: BaseCPU::takeOverFrom(BaseCPU*): \ Assertion `!new_itb_port->isConnected()' failed. * Check that all new CPUs are in the switched out state. * Check that all old CPUs are in the switched in state.
2012-11-02ARM: dump stats and process info on context switchesDam Sunwoo
This patch enables dumping statistics and Linux process information on context switch boundaries (__switch_to() calls) that are used for Streamline integration (a graphical statistics viewer from ARM).
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-09-25sim: Move CPU-specific methods from SimObject to the BaseCPU classAndreas Sandberg
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-21Clock: Move the clock and related functions to ClockedObjectAndreas Hansson
This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-05-26CPU: Merge the predecoder and decoder.Gabe Black
These classes are always used together, and merging them will give the ISAs more flexibility in how they cache things and manage the process. --HG-- rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-01MEM: Separate requests and responses for timing accessesAndreas Hansson
This patch moves send/recvTiming and send/recvTimingSnoop from the Port base class to the MasterPort and SlavePort, and also splits them into separate member functions for requests and responses: send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq, send/recvTimingSnoopResp. A master port sends requests and receives responses, and also receives snoop requests and sends snoop responses. A slave port has the reciprocal behaviour as it receives requests and sends responses, and sends snoop requests and receives snoop responses. For all MemObjects that have only master ports or slave ports (but not both), e.g. a CPU, or a PIO device, this patch merely adds more clarity to what kind of access is taking place. For example, a CPU port used to call sendTiming, and will now call sendTimingReq. Similarly, a response previously came back through recvTiming, which is now recvTimingResp. For the modules that have both master and slave ports, e.g. the bus, the behaviour was previously relying on branches based on pkt->isRequest(), and this is now replaced with a direct call to the apprioriate member function depending on the type of access. Please note that send/recvRetry is still shared by all the timing accessors and remains in the Port base class for now (to maintain the current bus functionality and avoid changing the statistics of all regressions). The packet queue is split into a MasterPort and SlavePort version to facilitate the use of the new timing accessors. All uses of the PacketQueue are updated accordingly. With this patch, the type of packet (request or response) is now well defined for each type of access, and asserts on pkt->isRequest() and pkt->isResponse() are now moved to the appropriate send member functions. It is also worth noting that sendTimingSnoopReq no longer returns a boolean, as the semantics do not alow snoop requests to be rejected or stalled. All these assumptions are now excplicitly part of the port interface itself.
2012-04-14MEM: Separate snoops and normal memory requests/responsesAndreas Hansson
This patch introduces port access methods that separates snoop request/responses from normal memory request/responses. The differentiation is made for functional, atomic and timing accesses and builds on the introduction of master and slave ports. Before the introduction of this patch, the packets belonging to the different phases of the protocol (request -> [forwarded snoop request -> snoop response]* -> response) all use the same port access functions, even though the snoop packets flow in the opposite direction to the normal packet. That is, a coherent master sends normal request and receives responses, but receives snoop requests and sends snoop responses (vice versa for the slave). These two distinct phases now use different access functions, as described below. Starting with the functional access, a master sends a request to a slave through sendFunctional, and the request packet is turned into a response before the call returns. In a system without cache coherence, this is all that is needed from the functional interface. For the cache-coherent scenario, a slave also sends snoop requests to coherent masters through sendFunctionalSnoop, with responses returned within the same packet pointer. This is currently used by the bus and caches, and the LSQ of the O3 CPU. The send/recvFunctional and send/recvFunctionalSnoop are moved from the Port super class to the appropriate subclass. Atomic accesses follow the same flow as functional accesses, with request being sent from master to slave through sendAtomic. In the case of cache-coherent ports, a slave can send snoop requests to a master through sendAtomicSnoop. Just as for the functional access methods, the atomic send and receive member functions are moved to the appropriate subclasses. The timing access methods are different from the functional and atomic in that requests and responses are separated in time and send/recvTiming are used for both directions. Hence, a master uses sendTiming to send a request to a slave, and a slave uses sendTiming to send a response back to a master, at a later point in time. Snoop requests and responses travel in the opposite direction, similar to what happens in functional and atomic accesses. With the introduction of this patch, it is possible to determine the direction of packets in the bus, and no longer necessary to look for both a master and a slave port with the requested port id. In contrast to the normal recvFunctional, recvAtomic and recvTiming that are pure virtual functions, the recvFunctionalSnoop, recvAtomicSnoop and recvTimingSnoop have a default implementation that calls panic. This is to allow non-coherent master and slave ports to not implement these functions.
2012-04-03Atomic: Remove the physmem_port and access memory directlyAndreas Hansson
This patch removes the physmem_port from the Atomic CPU and instead uses the system pointer to access the physmem when using the fastmem option. The system already keeps track of the physmem and the valid memory address ranges, and with this patch we merely make use of that existing functionality. As a result of this change, the overloaded getMasterPort in the Atomic CPU can be removed, thus unifying the CPUs.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-19clang: Fix recently introduced clang compilation errorsAndreas Hansson
This patch makes the code compile with clang 2.9 and 3.0 again by making two very minor changes. Firt, it maintains a strict typing in the forward declaration of the BaseCPUParams. Second, it adds a FullSystemInt flag of the type unsigned int next to the boolean FullSystem flag. The FullSystemInt variable can be used in decode-statements (expands to switch statements) in the instruction decoder.
2012-03-02CPU: Check that the interrupt controller is created when neededAndreas Hansson
This patch adds a creation-time check to the CPU to ensure that the interrupt controller is created for the cases where it is needed, i.e. if the CPU is not being switched in later and not a checker CPU. The patch also adds the "createInterruptController" call to a number of the regression scripts.
2012-02-24CPU: Round-two unifying instr/data CPU ports across modelsAndreas Hansson
This patch continues the unification of how the different CPU models create and share their instruction and data ports. Most importantly, it forces every CPU to have an instruction and a data port, and gives these ports explicit getters in the BaseCPU (getDataPort and getInstPort). The patch helps in simplifying the code, make assumptions more explicit, andfurther ease future patches related to the CPU ports. The biggest changes are in the in-order model (that was not modified in the previous unification patch), which now moves the ports from the CacheUnit to the CPU. It also distinguishes the instruction fetch and load-store unit from the rest of the resources, and avoids the use of indices and casting in favour of keeping track of these two units explicitly (since they are always there anyways). The atomic, timing and O3 model simply return references to their already existing ports.
2012-02-12cpu: add separate stats for insts/ops both globally and per cpu modelAnthony Gutierrez
2012-02-12mem: Add a master ID to each request object.Ali Saidi
This change adds a master id to each request object which can be used identify every device in the system that is capable of issuing a request. This is part of the way to removing the numCpus+1 stats in the cache and replacing them with the master ids. This is one of a series of changes that make way for the stats output to be changed to python.
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-17CPU: Moving towards a more general port across CPU modelsAndreas Hansson
This patch performs minimal changes to move the instruction and data ports from specialised subclasses to the base CPU (to the largest degree possible). Ultimately it servers to make the CPU(s) have a well-defined interface to the memory sub-system.
2012-01-09O3: Add support of function tracing with O3 CPU.Ali Saidi
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-11-18SE/FS: Get rid of FULL_SYSTEM in the CPU directory.Gabe Black
2011-11-01SE/FS: Expose the same methods on the CPUs in SE and FS modes.Gabe Black
2011-10-09SE/FS: Build the Interrupt objects in SE mode.Gabe Black
2011-04-15includes: sort all includesNathan Binkert
2011-03-26mips: cleanup ISA-specific codeKorey Sewell
*** (1): get rid of expandForMT function MIPS is the only ISA that cares about having a piece of ISA state integrate multiple threads so add constants for MIPS and relieve the other ISAs from having to define this. Also, InOrder was the only core that was actively calling this function * * * (2): get rid of corespecific type The CoreSpecific type was used as a proxy to pass in HW specific params to a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense to not force every other ISA to use CoreSpecific as well use a special reset function to set it. That probably should go in a PowerOn reset fault anyway.
2011-02-06m5: added work completed monitoring supportBrad Beckmann
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2011-01-07Replace curTick global variable with accessor functions.Steve Reinhardt
This step makes it easy to replace the accessor functions (which still access a global variable) with ones that access per-thread curTick values.
2010-11-15O3: Make O3 support variably lengthed instructions.Gabe Black
2010-04-15tick: rename Clock namespace to SimClockNathan Binkert
2010-01-12since totalInstructions() is impl'ed by all the cpus, make it an abstract ↵Lisa Hsu
base class.
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-05-26types: add a type for thread IDs and try to use it everywhereNathan Binkert
2009-05-05cpus: fix cpu progress eventKorey Sewell
this was double scheduling itself (once in constructor and once in cpu code). also add support for stopping / starting progress events through repeatEvent flag and also changing the interval of the progress event as well
2009-03-05stats: Fix all stats usages to deal with template fixesNathan Binkert
2009-01-24cpu: provide a wakeup mechanism that can be used to pull CPUs out of sleep.Nathan Binkert
Make interrupts use the new wakeup method, and pull all of the interrupt stuff into the cpu base class so that only the wakeup code needs to be updated. I tried to make wakeup, wakeCPU, and the various other mechanisms for waking and sleeping a little more sane, but I couldn't understand why the statistics were changing the way they were. Maybe we'll try again some day.
2008-11-04get rid of all instances of readTid() and getThreadNum(). Unify and eliminateLisa Hsu
redundancies with threadId() as their replacement.
2008-11-02make BaseCPU the provider of _cpuId, and cpuId() instead of being scatteredLisa Hsu
across the subclasses. generally make it so that member data is _cpuId and accessor functions are cpuId(). The ID val comes from the python (default -1 if none provided), and if it is -1, the index of cpuList will be given. this has passed util/regress quick and se.py -n4 and fs.py -n4 as well as standard switch.
2008-10-21style: Use the correct m5 style for things relating to interrupts.Nathan Binkert
2008-10-12CPU: Create a microcode ROM object in the CPU which is defined by the ISA.Gabe Black
2008-10-12Turn Interrupts objects into SimObjects. Also, move local APIC state into ↵Gabe Black
x86's Interrupts object.