summaryrefslogtreecommitdiff
path: root/src/cpu/o3/commit.hh
AgeCommit message (Collapse)Author
2015-03-09cpu: o3: commit: mark pipeline delay variable as constsNilay Vaish
2015-03-09cpu: o3: remove unused stat variables.Nilay Vaish
2015-03-09cpu: o3: remove member variable squashCounterNilay Vaish
The variable is used in only one place and a whole new function setNextStatus() has been defined just to compute the value of the variable. Instead of calling the function, the value is now computed in the loop that preceded the function call.
2014-09-03cpu: Fix o3 drain bugMitch Hayenga
For X86, the o3 CPU would get stuck with the commit stage not being drained if an interrupt arrived while drain was pending. isDrained() makes sure that pcState.microPC() == 0, thus ensuring that we are at an instruction boundary. However, when we take an interrupt we execute: pcState.upc(romMicroPC(entry)); pcState.nupc(romMicroPC(entry) + 1); tc->pcState(pcState); As a result, the MicroPC is no longer zero. This patch ensures the drain is delayed until no interrupts are present. Once draining, non-synchronous interrupts are deffered until after the switch.
2014-09-03cpu: Fix SMT scheduling issue with the O3 cpuMitch Hayenga
The o3 cpu could attempt to schedule inactive threads under round-robin SMT mode. This is because it maintained an independent priority list of threads from the active thread list. This priority list could be come stale once threads were inactive, leading to the cpu trying to fetch/commit from inactive threads. Additionally the fetch queue is now forcibly flushed of instrctuctions from the de-scheduled thread. Relevant output: 24557000: system.cpu: [tid:1]: Calling deactivate thread. 24557000: system.cpu: [tid:1]: Removing from active threads list 24557500: system.cpu: FullO3CPU: Ticking main, FullO3CPU. 24557500: system.cpu.fetch: Running stage. 24557500: system.cpu.fetch: Attempting to fetch from [tid:1]
2014-09-03cpu: Fix o3 front-end pipeline interlock behaviorMitch Hayenga
The o3 pipeline interlock/stall logic is incorrect. o3 unnecessicarily stalled fetch and decode due to later stages in the pipeline. In general, a stage should usually only consider if it is stalled by the adjacent, downstream stage. Forcing stalls due to later stages creates and results in bubbles in the pipeline. Additionally, o3 stalled the entire frontend (fetch, decode, rename) on a branch mispredict while the ROB is being serially walked to update the RAT (robSquashing). Only should have stalled at rename.
2014-05-09cpu: add more instruction mix statisticsCurtis Dunham
For the o3, add instruction mix (OpClass) histogram at commit (stats also already collected at issue). For the simple CPUs we add a histogram of executed instructions
2014-01-24base: add support for probe points and common probesMatt Horsnell
The probe patch is motivated by the desire to move analytical and trace code away from functional code. This is achieved by the probe interface which is essentially a glorified observer model. What this means to users: * add a probe point and a "notify" call at the source of an "event" * add an isolated module, that is being used to carry out *your* analysis (e.g. generate a trace) * register that module as a probe listener Note: an example is given for reference in src/cpu/o3/simple_trace.[hh|cc] and src/cpu/SimpleTrace.py What is happening under the hood: * every SimObject maintains has a ProbeManager. * during initialization (src/python/m5/simulate.py) first regProbePoints and the regProbeListeners is called on each SimObject. this hooks up the probe point notify calls with the listeners. FAQs: Why did you develop probe points: * to remove trace, stats gathering, analytical code out of the functional code. * the belief that probes could be generically useful. What is a probe point: * a probe point is used to notify upon a given event (e.g. cpu commits an instruction) What is a probe listener: * a class that handles whatever the user wishes to do when they are notified about an event. What can be passed on notify: * probe points are templates, and so the user can generate probes that pass any type of argument (by const reference) to a listener. What relationships can be generated (1:1, 1:N, N:M etc): * there isn't a restriction. You can hook probe points and listeners up in a 1:1, 1:N, N:M relationship. They become useful when a number of modules listen to the same probe points. The idea being that you can add a small number of probes into the source code and develop a larger number of useful analysis modules that use information passed by the probes. Can you give examples: * adding a probe point to the cpu's commit method allows you to build a trace module (outputting assembler), you could re-use this to gather instruction distribution (arithmetic, load/store, conditional, control flow) stats. Why is the probe interface currently restricted to passing a const reference: * the desire, initially at least, is to allow an interface to observe functionality, but not to change functionality. * of course this can be subverted by const-casting. What is the performance impact of adding probes: * when nothing is actively listening to the probes they should have a relatively minor impact. Profiling has suggested even with a large number of probes (60) the impact of them (when not active) is very minimal (<1%).
2013-02-15cpu: Fix a livelock in the o3 cpu.Ali Saidi
Check if an instruction just enabled interrupts and we've previously had an interrupt pending that was not handled because interrupts were subsequently disabled before the pipeline reached a place to handle the interrupt. In that case squash now to make sure the interrupt is handled.
2013-01-07cpu: Rewrite O3 draining to avoid stopping in microcodeAndreas Sandberg
Previously, the O3 CPU could stop in the middle of a microcode sequence. This patch makes sure that the pipeline stops when it has committed a normal instruction or exited from a microcode sequence. Additionally, it makes sure that the pipeline has no instructions in flight when it is drained, which should make draining more robust. Draining is controlled in the commit stage, which checks if the next PC after a committed instruction is in microcode. If this isn't the case, it requests a squash of all instructions after that the instruction that just committed and immediately signals a drain stall to the fetch stage. The CPU then continues to execute until the pipeline and all associated buffers are empty.
2013-01-07cpu: Fix broken squashAfter implementation in O3 CPUAndreas Sandberg
Commit can currently both commit and squash in the same cycle. This confuses other stages since the signals coming from the commit stage can only signal either a squash or a commit in a cycle. This changeset changes the behavior of squashAfter so that it commits all instructions, including the instruction that requested the squash, in the first cycle and then starts to squash in the next cycle.
2013-01-07cpu: Initialize the O3 pipeline from startup()Andreas Sandberg
The entire O3 pipeline used to be initialized from init(), which is called before initState() or unserialize(). This causes the pipeline to be initialized from an incorrect thread context. This doesn't currently lead to correctness problems as instructions fetched from the incorrect start PC will be squashed a few cycles after initialization. This patch will affect the regressions since the O3 CPU now issues its first instruction fetch to the correct PC instead of 0x0.
2012-09-12stats: remove duplicate instruction stats from the commit stageAnthony Gutierrez
these stats are duplicates of insts/opsCommitted, cause confusion, and are poorly named.
2012-09-07Param: Transition to Cycles for relevant parametersAndreas Hansson
This patch is a first step to using Cycles as a parameter type. The main affected modules are the CPUs and the Ruby caches. There are definitely plenty more places that are affected, but this patch serves as a starting point to making the transition. An important part of this patch is to actually enable parameters to be specified as Param.Cycles which involves some changes to params.py.
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28Clock: Rework clocks to avoid tick-to-cycle transformationsAndreas Hansson
This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-02-12cpu: add separate stats for insts/ops both globally and per cpu modelAnthony Gutierrez
2012-02-10O3 CPU: Strengthen condition for handling interruptsNilay Vaish
The condition for handling interrupts is to check whether or not the cpu's instruction list is empty. As observed, this can lead to cases in which even though the instruction list is empty, interrupts are handled when they should not be. The condition is being strengthened so that interrupts get handled only when the last committed microop did not had IsDelayedCommit set.
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2011-11-18SE/FS: Get rid of FULL_SYSTEM in the CPU directory.Gabe Black
2011-04-15includes: fix up code after sortingNathan Binkert
2011-04-15includes: sort all includesNathan Binkert
2011-03-17O3: Cleanup the commitInfo comm struct.Ali Saidi
Get rid of unused members and use base types rather than derrived values where possible to limit amount of state.
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2011-01-18O3: Keep around the last committed instruction and use for squashing.Ali Saidi
Without this change 0 is always used for the youngest sequence number if a squash occured and the ROB was empty (E.g. an instruction is marked serializeAfter or a fetch stall prevents other instructions from issuing). Using 0 there is a race to rename where an instruction that committed the same cycle as the squashing instruction can have it's renamed state undone by the squash using sequence number 0.
2011-01-18O3: Fixes fetch deadlock when the interrupt clears before CPU handles it.Min Kyu Jeong
When this condition occurs the cpu should restart the fetch stage to fetch from the original execution path. Fault handling in the commit stage is cleaned up a little bit so the control flow is simplier. Finally, if an instruction is being used to carry a fault it isn't executed, so the fault propagates appropriately.
2011-01-03Move sched_list.hh and timebuf.hh from src/base to src/cpu.Steve Reinhardt
These files really aren't general enough to belong in src/base. This patch doesn't reorder include lines, leaving them unsorted in many cases, but Nate's magic script will fix that up shortly. --HG-- rename : src/base/sched_list.hh => src/cpu/sched_list.hh rename : src/base/timebuf.hh => src/cpu/timebuf.hh
2010-12-07O3: Support squashing all state after special instructionAli Saidi
For SPARC ASIs are added to the ExtMachInst. If the ASI is changed simply marking the instruction as Serializing isn't enough beacuse that only stops rename. This provides a mechanism to squash all the instructions and refetch them
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2009-05-26types: add a type for thread IDs and try to use it everywhereNathan Binkert
2009-03-05stats: Fix all stats usages to deal with template fixesNathan Binkert
2008-08-11params: Convert the CPU objects to use the auto generated param structs.Nathan Binkert
A whole bunch of stuff has been converted to use the new params stuff, but the CPU wasn't one of them. While we're at it, make some things a bit more stylish. Most of the work was done by Gabe, I just cleaned stuff up a bit more at the end.
2008-02-06Make the Event::description() a const functionStephen Hines
--HG-- extra : convert_revision : c7768d54d3f78685e93920069f5485083ca989c0
2007-04-14Add support for microcode and pull out the special branch delay slot ↵Gabe Black
handling. Branch delay slots need to be squash on a mispredict as well because the nnpc they saw was incorrect. --HG-- extra : convert_revision : 8b9c603616bcad254417a7a3fa3edfb4c8728719
2007-04-04Pass ISA-specific O3 CPU as a constructor parameter instead of using setCPU ↵Kevin Lim
functions. src/cpu/o3/alpha/cpu_impl.hh: Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions. --HG-- extra : convert_revision : 74f4b1f5fb6f95a56081f367cce7ff44acb5688a
2007-03-23Updates for commit.Kevin Lim
1. Move interrupt handling to a separate function to clean up main commit() function a bit. Also gate the function call off properly based on whether or not there are outstanding interrupts, and the system is not in PAL mode. 2. Better handling of updating instruction's status bits. Instructions are not marked "atCommit" until other stages view it (pushed off to IEW/IQ), and they have been properly handled (faults). 3. Don't consider the ROB "empty" for the purpose of other stages until the ROB is empty, all stores have written back, and there was no store commits this cycle. The last is necessary in case a store committed, in which case it would look like all stores have written back but in actuality have not. src/cpu/o3/commit.hh: Slightly modify how interrupts are handled. Also include some extra bools to keep track of state properly. src/cpu/o3/commit_impl.hh: Slightly modify how interrupts are handled. Also include some extra bools to keep track of state. General correctness updates, most specifically for when commit broadcasts to other stages that the ROB is empty. --HG-- extra : convert_revision : 682ec6ccf4ee6ed0c8a030ceaba1c90a3619d102
2006-11-13More interrupt reworking.Kevin Lim
--HG-- extra : convert_revision : 40dfbb72c4e418c54e909c54dad5fe6ef7017cb4
2006-08-15Cleaned up include files and got rid of many using directives in header files.Gabe Black
--HG-- extra : convert_revision : 6b11e039cbc061dab75195fa1aebe6ca2cdc6f91
2006-07-26MIPS ISA runs 'hello world' in O3CPU ...Korey Sewell
src/arch/mips/isa/base.isa: special case syscall disasembly... maybe give own instruction class? src/arch/mips/isa/decoder.isa: add 'IsSerializeAfter' flag for syscall src/cpu/o3/commit.hh: Add skidBuffer to commit src/cpu/o3/commit_impl.hh: Use skidbuffer in MIPS ISA src/cpu/o3/fetch_impl.hh: Print name out when there is a fault src/cpu/o3/mips/cpu_impl.hh: change comment --HG-- extra : convert_revision : d032549e07102bdd50aa09f044fce8de6f0239b5
2006-07-23This changeset gets the MIPS ISA pretty much working in the O3CPU. It ↵Korey Sewell
builds, runs, and gets very very close to completing the hello world succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh! Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... ) src/arch/alpha/isa/mem.isa: spacing src/arch/mips/faults.cc: src/arch/mips/faults.hh: Gabe really authored this src/arch/mips/isa/decoder.isa: add StoreConditional Flag to instruction src/arch/mips/isa/formats/basic.isa: Steven really did this file src/arch/mips/isa/formats/branch.isa: fix bug for uncond/cond control src/arch/mips/isa/formats/mem.isa: Adjust O3CPU memory access to use new memory model interface. src/arch/mips/isa/formats/util.isa: update LoadStoreBase template src/arch/mips/isa_traits.cc: update SERIALIZE partially src/arch/mips/process.cc: src/arch/mips/process.hh: no need for this for NOW. ASID/Virtual addressing handles it src/arch/mips/regfile/misc_regfile.hh: add in clear() function and comments for future usage of special misc. regs src/cpu/base_dyn_inst.hh: add in nextNPC variable and supporting functions. add isCondDelaySlot function Update predTaken and mispredicted functions src/cpu/base_dyn_inst_impl.hh: init nextNPC src/cpu/o3/SConscript: add MIPS files to compile src/cpu/o3/alpha/thread_context.hh: no need for my name on this file src/cpu/o3/bpred_unit_impl.hh: Update RAS appropriately for MIPS src/cpu/o3/comm.hh: add some extra communication variables to aid in handling the delay slots src/cpu/o3/commit.hh: minor name fix for nextNPC functions. src/cpu/o3/commit_impl.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/inst_queue_impl.hh: src/cpu/o3/rename_impl.hh: Fix necessary variables and functions for squashes with delay slots src/cpu/o3/cpu.cc: Update function interface ... adjust removeInstsNotInROB function to recognize delay slots insts src/cpu/o3/cpu.hh: update removeInstsNotInROB src/cpu/o3/decode.hh: declare necessary variables for handling delay slot src/cpu/o3/dyn_inst.hh: Add in MipsDynInst src/cpu/o3/fetch.hh: src/cpu/o3/iew.hh: src/cpu/o3/rename.hh: declare necessary variables and adjust functions for handling delay slot src/cpu/o3/inst_queue.hh: src/cpu/simple/base.cc: no need for my name here src/cpu/o3/isa_specific.hh: add in MIPS files src/cpu/o3/scoreboard.hh: dont include alpha specific isa traits! src/cpu/o3/thread_context.hh: no need for my name here, i just rearranged where the file goes src/cpu/static_inst.hh: add isCondDelaySlot function src/cpu/o3/mips/cpu.cc: src/cpu/o3/mips/cpu.hh: src/cpu/o3/mips/cpu_builder.cc: src/cpu/o3/mips/cpu_impl.hh: src/cpu/o3/mips/dyn_inst.cc: src/cpu/o3/mips/dyn_inst.hh: src/cpu/o3/mips/dyn_inst_impl.hh: src/cpu/o3/mips/impl.hh: src/cpu/o3/mips/params.hh: src/cpu/o3/mips/thread_context.cc: src/cpu/o3/mips/thread_context.hh: MIPS file for O3CPU...mirrors ALPHA definition --HG-- extra : convert_revision : 9bb199b4085903e49ffd5a4c8ac44d11460d988c
2006-07-10Some minor cleanups.Kevin Lim
src/cpu/SConscript: Change the error message to be slightly nicer. src/cpu/o3/commit.hh: Remove old code. src/cpu/o3/commit_impl.hh: Remove old unused code. --HG-- extra : convert_revision : 48aa430e1f3554007dd5e4f3d9e89b5e4f124390
2006-07-06Fix the O3CPU to support the multi-pass method for checking if the system ↵Kevin Lim
has fully drained. src/cpu/o3/commit.hh: src/cpu/o3/commit_impl.hh: src/cpu/o3/decode.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/rename.hh: src/cpu/o3/rename_impl.hh: Return a value so that the CPU can instantly return from draining if the pipeline is already drained. src/cpu/o3/cpu.cc: Use values returned from pipeline stages so that the CPU can instantly return from draining if the pipeline is already drained. --HG-- extra : convert_revision : d8ef6b811644ea67c8b40c4719273fa224105811
2006-07-06Support for draining, and the new method of switching out. Now switching ↵Kevin Lim
out happens after the pipeline has been drained, deferring the three way handshake to the normal drain mechanism. The calls of switchOut() and takeOverFrom() both take action immediately. src/cpu/o3/commit.hh: src/cpu/o3/commit_impl.hh: src/cpu/o3/cpu.cc: src/cpu/o3/cpu.hh: src/cpu/o3/decode.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/rename.hh: src/cpu/o3/rename_impl.hh: Support for draining, new method of switching out. --HG-- extra : convert_revision : 05bf8b271ec85b3e2c675c3bed6c42aeba21f465
2006-07-02Fix default SMT configuration in O3CPU (i.e. fetch policy, workloads/numThreads)Korey Sewell
Edit Test3 for newmem src/base/traceflags.py: Add O3CPU flag src/cpu/base.cc: for some reason adding a BaseCPU flag doesnt work so just go back to old way... src/cpu/o3/alpha/cpu_builder.cc: Determine number threads by workload size instead of solely by parameter. Default SMT fetch policy to RoundRobin if it's not specified in Config file src/cpu/o3/commit.hh: only use nextNPC for !ALPHA src/cpu/o3/commit_impl.hh: add FetchTrapPending as condition for commit src/cpu/o3/cpu.cc: panic if active threads is more than Impl::MaxThreads src/cpu/o3/fetch.hh: src/cpu/o3/inst_queue.hh: src/cpu/o3/inst_queue_impl.hh: src/cpu/o3/rob.hh: src/cpu/o3/rob_impl.hh: name stuff src/cpu/o3/fetch_impl.hh: fatal if try to use SMT branch count, that's unimplemented right now src/python/m5/config.py: make it clearer that a parameter is not valid within a configuration class --HG-- extra : convert_revision : 55069847304e40e257f9225f0dc3894ce6491b34
2006-06-16Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge --HG-- extra : convert_revision : 488b9a9965dd86ca73dc9e510e5b3122cbd357f9
2006-06-16Two updates that got combined into one ChangeSet accidentally. They're both ↵Kevin Lim
pretty simple so they shouldn't cause any trouble. First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model. Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled. SConstruct: Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled. configs/test/test.py: Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick. src/base/traceflags.py: Add in O3CPU trace flag. src/cpu/SConscript: Rename AlphaFullCPU to AlphaO3CPU. Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included. src/cpu/base_dyn_inst.cc: src/cpu/base_dyn_inst.hh: Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU. src/cpu/cpu_models.py: src/cpu/o3/alpha_cpu.cc: src/cpu/o3/alpha_cpu.hh: src/cpu/o3/alpha_cpu_builder.cc: src/cpu/o3/alpha_cpu_impl.hh: Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model. src/cpu/o3/alpha_dyn_inst.hh: src/cpu/o3/alpha_dyn_inst_impl.hh: src/cpu/o3/alpha_impl.hh: src/cpu/o3/alpha_params.hh: src/cpu/o3/commit.hh: src/cpu/o3/cpu.hh: src/cpu/o3/decode.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch.hh: src/cpu/o3/iew.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/inst_queue.hh: src/cpu/o3/lsq.hh: src/cpu/o3/lsq_impl.hh: src/cpu/o3/lsq_unit.hh: src/cpu/o3/regfile.hh: src/cpu/o3/rename.hh: src/cpu/o3/rename_impl.hh: src/cpu/o3/rob.hh: src/cpu/o3/rob_impl.hh: src/cpu/o3/thread_state.hh: src/python/m5/objects/AlphaO3CPU.py: Rename FullCPU to O3CPU to differentiate from old FullCPU model. src/cpu/o3/commit_impl.hh: src/cpu/o3/cpu.cc: src/cpu/o3/fetch_impl.hh: src/cpu/o3/lsq_unit_impl.hh: Rename FullCPU to O3CPU to differentiate from old FullCPU model. Also #ifdef the checker code so it doesn't need to be included if it's not selected. --HG-- rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
2006-06-15Initial changes to allowed DetailedCPU to work with other architectures ↵Korey Sewell
(i.e. Sparc & MIPS) Still need to add some code to fetch & commit stages src/cpu/o3/commit.hh: src/cpu/o3/cpu.cc: src/cpu/o3/cpu.hh: Add nextNPC read & set functions src/cpu/o3/fetch.hh: src/cpu/o3/fetch_impl.hh: Add nextNPC --HG-- extra : convert_revision : 120677547d54091411399156bd066ce5baf785f7
2006-06-12Clean up/shift some code around.Kevin Lim
src/cpu/base_dyn_inst.cc: Clean up some code and update. src/cpu/base_dyn_inst.hh: Clean up some code and update with more descriptive function names. src/cpu/o3/alpha_cpu_builder.cc: src/cpu/o3/alpha_params.hh: src/cpu/o3/commit.hh: Remove unused parameters. src/cpu/o3/commit_impl.hh: Remove unused parameters, also set squashCounter directly to the counted number of squashes. src/cpu/o3/fetch_impl.hh: Update for function name changes. src/cpu/o3/iew.hh: src/cpu/o3/iew_impl.hh: Remove unused parameter, move some code into a function. --HG-- extra : convert_revision : 45abd77ad43dde2e93c2e53c4738c90ba8352a1d
2006-06-06Change ExecContext to ThreadContext. This is being renamed to differentiate ↵Kevin Lim
between the interface used objects outside of the CPU, and the interface used by the ISA. ThreadContext is used by objects outside of the CPU and is specifically defined in thread_context.hh. ExecContext is more implicit, and is defined by files such as base_dyn_inst.hh or cpu/simple/base.hh. Further renames/reorganization will be coming shortly; what is currently CPUExecContext (the old ExecContext from m5) will be renamed to SimpleThread or something similar. src/arch/alpha/arguments.cc: src/arch/alpha/arguments.hh: src/arch/alpha/ev5.cc: src/arch/alpha/faults.cc: src/arch/alpha/faults.hh: src/arch/alpha/freebsd/system.cc: src/arch/alpha/freebsd/system.hh: src/arch/alpha/isa/branch.isa: src/arch/alpha/isa/decoder.isa: src/arch/alpha/isa/main.isa: src/arch/alpha/linux/process.cc: src/arch/alpha/linux/system.cc: src/arch/alpha/linux/system.hh: src/arch/alpha/linux/threadinfo.hh: src/arch/alpha/process.cc: src/arch/alpha/regfile.hh: src/arch/alpha/stacktrace.cc: src/arch/alpha/stacktrace.hh: src/arch/alpha/tlb.cc: src/arch/alpha/tlb.hh: src/arch/alpha/tru64/process.cc: src/arch/alpha/tru64/system.cc: src/arch/alpha/tru64/system.hh: src/arch/alpha/utility.hh: src/arch/alpha/vtophys.cc: src/arch/alpha/vtophys.hh: src/arch/mips/faults.cc: src/arch/mips/faults.hh: src/arch/mips/isa_traits.cc: src/arch/mips/isa_traits.hh: src/arch/mips/linux/process.cc: src/arch/mips/process.cc: src/arch/mips/regfile/float_regfile.hh: src/arch/mips/regfile/int_regfile.hh: src/arch/mips/regfile/misc_regfile.hh: src/arch/mips/regfile/regfile.hh: src/arch/mips/stacktrace.hh: src/arch/sparc/faults.cc: src/arch/sparc/faults.hh: src/arch/sparc/isa_traits.hh: src/arch/sparc/linux/process.cc: src/arch/sparc/linux/process.hh: src/arch/sparc/process.cc: src/arch/sparc/regfile.hh: src/arch/sparc/solaris/process.cc: src/arch/sparc/stacktrace.hh: src/arch/sparc/ua2005.cc: src/arch/sparc/utility.hh: src/arch/sparc/vtophys.cc: src/arch/sparc/vtophys.hh: src/base/remote_gdb.cc: src/base/remote_gdb.hh: src/cpu/base.cc: src/cpu/base.hh: src/cpu/base_dyn_inst.hh: src/cpu/checker/cpu.cc: src/cpu/checker/cpu.hh: src/cpu/checker/exec_context.hh: src/cpu/cpu_exec_context.cc: src/cpu/cpu_exec_context.hh: src/cpu/cpuevent.cc: src/cpu/cpuevent.hh: src/cpu/exetrace.hh: src/cpu/intr_control.cc: src/cpu/memtest/memtest.hh: src/cpu/o3/alpha_cpu.hh: src/cpu/o3/alpha_cpu_impl.hh: src/cpu/o3/alpha_dyn_inst_impl.hh: src/cpu/o3/commit.hh: src/cpu/o3/commit_impl.hh: src/cpu/o3/cpu.cc: src/cpu/o3/cpu.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/regfile.hh: src/cpu/o3/thread_state.hh: src/cpu/ozone/back_end.hh: src/cpu/ozone/cpu.hh: src/cpu/ozone/cpu_impl.hh: src/cpu/ozone/front_end.hh: src/cpu/ozone/front_end_impl.hh: src/cpu/ozone/inorder_back_end.hh: src/cpu/ozone/lw_back_end.hh: src/cpu/ozone/lw_back_end_impl.hh: src/cpu/ozone/lw_lsq.hh: src/cpu/ozone/lw_lsq_impl.hh: src/cpu/ozone/thread_state.hh: src/cpu/pc_event.cc: src/cpu/pc_event.hh: src/cpu/profile.cc: src/cpu/profile.hh: src/cpu/quiesce_event.cc: src/cpu/quiesce_event.hh: src/cpu/simple/atomic.cc: src/cpu/simple/base.cc: src/cpu/simple/base.hh: src/cpu/simple/timing.cc: src/cpu/static_inst.cc: src/cpu/static_inst.hh: src/cpu/thread_state.hh: src/dev/alpha_console.cc: src/dev/ns_gige.cc: src/dev/sinic.cc: src/dev/tsunami_cchip.cc: src/kern/kernel_stats.cc: src/kern/kernel_stats.hh: src/kern/linux/events.cc: src/kern/linux/events.hh: src/kern/system_events.cc: src/kern/system_events.hh: src/kern/tru64/dump_mbuf.cc: src/kern/tru64/tru64.hh: src/kern/tru64/tru64_events.cc: src/kern/tru64/tru64_events.hh: src/mem/vport.cc: src/mem/vport.hh: src/sim/faults.cc: src/sim/faults.hh: src/sim/process.cc: src/sim/process.hh: src/sim/pseudo_inst.cc: src/sim/pseudo_inst.hh: src/sim/syscall_emul.cc: src/sim/syscall_emul.hh: src/sim/system.cc: src/cpu/thread_context.hh: src/sim/system.hh: src/sim/vptr.hh: Change ExecContext to ThreadContext. --HG-- rename : src/cpu/exec_context.hh => src/cpu/thread_context.hh extra : convert_revision : 108bb97d15a114a565a2a6a23faa554f4e2fd77e