summaryrefslogtreecommitdiff
path: root/src/cpu/o3/rename_impl.hh
AgeCommit message (Collapse)Author
2014-09-03cpu: Fix o3 front-end pipeline interlock behaviorMitch Hayenga
The o3 pipeline interlock/stall logic is incorrect. o3 unnecessicarily stalled fetch and decode due to later stages in the pipeline. In general, a stage should usually only consider if it is stalled by the adjacent, downstream stage. Forcing stalls due to later stages creates and results in bubbles in the pipeline. Additionally, o3 stalled the entire frontend (fetch, decode, rename) on a branch mispredict while the ROB is being serially walked to update the RAT (robSquashing). Only should have stalled at rename.
2014-06-21o3: split load & store queue full cases in renameBinh Pham
Check for free entries in Load Queue and Store Queue separately to avoid cases when load cannot be renamed due to full Store Queue and vice versa. This work was done while Binh was an intern at AMD Research.
2014-04-23cpu: Add O3 CPU width checksDam Sunwoo
O3CPU has a compile-time maximum width set in o3/impl.hh, but checking the configuration against this limit was not implemented anywhere except for fetch. Configuring a wider pipe than the limit can silently cause various issues during the simulation. This patch adds the proper checking in the constructor of the various pipeline stages.
2013-10-17cpu: add consistent guarding to *_impl.hh files.Matt Horsnell
2013-10-17cpu: Removing an unused variable in renameFaissal Sleiman
2013-10-15cpu: add a condition-code register classYasuko Eckert
Add a third register class for condition codes, in parallel with the integer and FP classes. No ISAs use the CC class at this point though.
2013-10-15cpu/o3: clean up rename map and free listSteve Reinhardt
Restructured rename map and free list to clean up some extraneous code and separate out common code that can be reused across different register classes (int and fp at this point). Both components now consist of a set of Simple* objects that are stand-alone rename map & free list for each class, plus a Unified* object that presents a unified interface across all register classes and then redirects accesses to the appropriate Simple* object as needed. Moved free list initialization to PhysRegFile to better isolate knowledge of physical register index mappings to that class (and remove the need to pass a number of parameters to the free list constructor). Causes a small change to these stats: cpu.rename.int_rename_lookups cpu.rename.fp_rename_lookups because they are now categorized on a per-operand basis rather than a per-instruction basis. That is, an instruction with mixed fp/int/misc operand types will have each operand categorized independently, where previously the lookup was categorized based on the instruction type.
2013-10-15cpu: rename *_DepTag constants to *_Reg_BaseSteve Reinhardt
Make these names more meaningful. Specifically, made these substitutions: s/FP_Base_DepTag/FP_Reg_Base/g; s/Ctrl_Base_DepTag/Misc_Reg_Base/g; s/Max_DepTag/Max_Reg_Index/g;
2013-10-15cpu/o3: clean up scoreboard objectSteve Reinhardt
It had a bunch of fields (and associated constructor parameters) thet it didn't really use, and the array initialization was needlessly verbose. Also just hardwired the getReg() method to aleays return true for misc regs, rather than having an array of bits that we always kept marked as ready.
2013-10-15cpu: clean up architectural register classificationSteve Reinhardt
Move from a poorly documented scheme where the mapping of unified architectural register indices to register classes is hardcoded all over to one where there's an enum for the register classes and a function that encapsulates the mapping.
2013-02-15cpu: Fix rename mis-handling serializing instructions when resource constrainedGeoffrey Blake
The rename can mis-handle serializing instructions (i.e. strex) if it gets into a resource constrained situation and the serializing instruction has to be placed on the skid buffer to handle blocking. In this situation the instruction informs the pipeline it is serializing and logs that the next instruction must be serialized, but since we are blocking the pipeline defers this action to place the serializing instruction and incoming instructions into the skid buffer. When resuming from blocking, rename will pull the serializing instruction from the skid buffer and the current logic will see this as the "next" instruction that has to be serialized and because of flags set on the serializing instruction, it passes through the pipeline stage as normal and resets rename to non-serializing. This causes instructions to follow the serializing inst incorrectly and eventually leads to an error in the pipeline. To fix this rename should check first if it has to block before checking for serializing instructions.
2013-02-15o3: fix tick used for renaming and issue with range selectionMatt Horsnell
Fixes the tick used from rename: - previously this gathered the tick on leaving rename which was always 1 less than the dispatch. This conflated the decode ticks when back pressure built in the pipeline. - now picks up tick on entry. Added --store_completions flag: - will additionally display the store completion tail in the viewer. - this highlights periods when large numbers of stores are outstanding (>16 LSQ blocking) Allows selection by tick range (previously this caused an infinite loop)
2013-01-07cpu: Rewrite O3 draining to avoid stopping in microcodeAndreas Sandberg
Previously, the O3 CPU could stop in the middle of a microcode sequence. This patch makes sure that the pipeline stops when it has committed a normal instruction or exited from a microcode sequence. Additionally, it makes sure that the pipeline has no instructions in flight when it is drained, which should make draining more robust. Draining is controlled in the commit stage, which checks if the next PC after a committed instruction is in microcode. If this isn't the case, it requests a squash of all instructions after that the instruction that just committed and immediately signals a drain stall to the fetch stage. The CPU then continues to execute until the pipeline and all associated buffers are empty.
2013-01-07cpu: Initialize the O3 pipeline from startup()Andreas Sandberg
The entire O3 pipeline used to be initialized from init(), which is called before initState() or unserialize(). This causes the pipeline to be initialized from an incorrect thread context. This doesn't currently lead to correctness problems as instructions fetched from the incorrect start PC will be squashed a few cycles after initialization. This patch will affect the regressions since the O3 CPU now issues its first instruction fetch to the correct PC instead of 0x0.
2012-06-05O3: Clean up the O3 structures and try to pack them a bit better.Ali Saidi
DynInst is extremely large the hope is that this re-organization will put the most used members close to each other.
2012-03-21O3: Fix sizing of decode to rename skid buffer.Andrew Lukefahr
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-09O3: Remove some asserts that no longer seem to be valid.Ali Saidi
2012-01-07Merge with main repository.Gabe Black
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-10-31GCC: Get everything working with gcc 4.6.1.Gabe Black
And by "everything" I mean all the quick regressions.
2011-07-15O3: Create a pipeline activity viewer for the O3 CPU model.Giacomo Gabrielli
Implemented a pipeline activity viewer as a python script (util/o3-pipeview.py) and modified O3 code base to support an extra trace flag (O3PipeView) for generating traces to be used as inputs by the tool.
2011-04-19stats: rename stats so they can be used as python expressionsNathan Binkert
2011-04-15trace: reimplement the DTRACE function so it doesn't use a vectorNathan Binkert
At the same time, rename the trace flags to debug flags since they have broader usage than simply tracing. This means that --trace-flags is now --debug-flags and --trace-help is now --debug-help
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2011-01-18O3: Don't try to scoreboard misc registers.Ali Saidi
I'm not positive this is the correct fix, but it's working right now. Either we need to do something like this, prevent the misc reg from being renamed at all, or there something else going on. We need to find the root cause as to why this is only a problem sometimes.
2010-11-18O3: Fix fp destination register flattening, and index offset adjusting.Gabe Black
This change makes O3 flatten floating point destination registers, and also fixes misc register flattening so that it's correctly repositioned relative to the resized regions for integer and floating point indices. It also fixes some overly long lines.
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-08-25ARM: Fixed register flattening logic (FP_Base_DepTag was set too low)Min Kyu Jeong
When decoding a srs instruction, invalid mode encoding returns invalid instruction. This can happen when garbage instructions are fetched from mispredicted path
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-07-08Registers: Add a registers.hh file as an ISA switched header.Gabe Black
This file is for register indices, Num* constants, and register types. copyRegs and copyMiscRegs were moved to utility.hh and utility.cc. --HG-- rename : src/arch/alpha/regfile.hh => src/arch/alpha/registers.hh rename : src/arch/arm/regfile.hh => src/arch/arm/registers.hh rename : src/arch/mips/regfile.hh => src/arch/mips/registers.hh rename : src/arch/sparc/regfile.hh => src/arch/sparc/registers.hh rename : src/arch/x86/regfile.hh => src/arch/x86/registers.hh
2009-07-08Registers: Add an ISA object which replaces the MiscRegFile.Gabe Black
This object encapsulates (or will eventually) the identity and characteristics of the ISA in the CPU.
2009-05-26types: add a type for thread IDs and try to use it everywhereNathan Binkert
2008-08-11params: Convert the CPU objects to use the auto generated param structs.Nathan Binkert
A whole bunch of stuff has been converted to use the new params stuff, but the CPU wasn't one of them. While we're at it, make some things a bit more stylish. Most of the work was done by Gabe, I just cleaned stuff up a bit more at the end.
2007-09-19X86: Put in the foundation for x87 stack based fp registers.Gabe Black
--HG-- extra : convert_revision : 940f92efd4a9dc59106e991cc6d9836861ab69de
2007-04-14Add support for microcode and pull out the special branch delay slot ↵Gabe Black
handling. Branch delay slots need to be squash on a mispredict as well because the nnpc they saw was incorrect. --HG-- extra : convert_revision : 8b9c603616bcad254417a7a3fa3edfb4c8728719
2007-04-13Remove most of the special handling for delay slots since they have to be ↵Gabe Black
squashed anyway on a mispredict. This is because the NNPC value they saw when executing was incorrect. --HG-- extra : convert_revision : b42c4eb28b4fbba66c65cbd0a5033bf886c1532d
2007-04-09Merge ktlim@zizzer:/bk/newmemKevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/tmp/head --HG-- extra : convert_revision : a250eed999be9b8acd6f420fdfe8f1b02905beb1
2007-04-09Fix bug when blocking due to no free registers.Kevin Lim
--HG-- extra : convert_revision : a1a218d3294515184689041487057495223360b7
2007-04-08Take into account that the flattened integer register space is a different ↵Gabe Black
size than the architected one. Also fixed some asserts. --HG-- extra : convert_revision : 26e7863919d1b976ba8cad747af475a6f18e9440
2007-04-04Pass ISA-specific O3 CPU as a constructor parameter instead of using setCPU ↵Kevin Lim
functions. src/cpu/o3/alpha/cpu_impl.hh: Pass ISA-specific O3 CPU to FullO3CPU as a constructor parameter instead of using setCPU functions. --HG-- extra : convert_revision : 74f4b1f5fb6f95a56081f367cce7ff44acb5688a
2007-04-02Remove/comment out DPRINTFs that were causing a segfault.Kevin Lim
The removed ones were unnecessary. The commented out ones could be useful in the future, should this problem get fixed. See flyspray task #243. src/cpu/o3/commit_impl.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/inst_queue_impl.hh: src/cpu/o3/lsq_impl.hh: src/cpu/o3/lsq_unit_impl.hh: src/cpu/o3/rename_impl.hh: src/cpu/o3/rob_impl.hh: Remove/comment out DPRINTFs that were causing a segfault. --HG-- extra : convert_revision : b5aeda1c6300dfde5e0a3e9b8c4c5f6fa00b9862
2007-01-03Merge zizzer:/bk/newmemGabe Black
into zower.eecs.umich.edu:/eecshome/m5/newmem --HG-- extra : convert_revision : f4a05accb8fa24d425dd818b1b7f268378180e99
2006-12-20don't use (*activeThreads).begin(), use activeThreads->blah().Nathan Binkert
Also don't call (*activeThreads).end() over and over. Just call activeThreads->end() once and save the result. Make sure we always check that there are elements in the list before we grab the first one. --HG-- extra : convert_revision : d769d8ed52da99532d57a9bbc93e92ddf22b7e58
2006-12-16Add in capability to return to unblocking after a squash. This is needed ↵Gabe Black
because if you don't squash -all- the instructions, you need to keep clearing out whatever is left in the skid buffer. --HG-- extra : convert_revision : 7308eda27f4366348cf5fce71ddfa4b217bc172d
2006-12-07Fix for squashing during a serializing instruction.Gabe Black
--HG-- extra : convert_revision : 04f9131258bfb7cca1654e00273edb29bde2366b
2006-12-06Change rename to rename the flattened register index instead of the ↵Gabe Black
architectural one. --HG-- extra : convert_revision : 757866ad7a3c8be7382e1ffa71c60bc00c861f6f
2006-09-30Merge ktlim@zamp:./local/clean/o3-merge/m5Kevin Lim
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem configs/boot/micro_memlat.rcS: configs/boot/micro_tlblat.rcS: src/arch/alpha/ev5.cc: src/arch/alpha/isa/decoder.isa: src/arch/alpha/isa_traits.hh: src/cpu/base.cc: src/cpu/base.hh: src/cpu/base_dyn_inst.hh: src/cpu/checker/cpu.hh: src/cpu/checker/cpu_impl.hh: src/cpu/o3/alpha/cpu_impl.hh: src/cpu/o3/alpha/params.hh: src/cpu/o3/checker_builder.cc: src/cpu/o3/commit_impl.hh: src/cpu/o3/cpu.cc: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/inst_queue.hh: src/cpu/o3/lsq.hh: src/cpu/o3/lsq_impl.hh: src/cpu/o3/lsq_unit.hh: src/cpu/o3/lsq_unit_impl.hh: src/cpu/o3/regfile.hh: src/cpu/o3/rename_impl.hh: src/cpu/o3/thread_state.hh: src/cpu/ozone/checker_builder.cc: src/cpu/ozone/cpu.hh: src/cpu/ozone/cpu_impl.hh: src/cpu/ozone/front_end.hh: src/cpu/ozone/front_end_impl.hh: src/cpu/ozone/lw_back_end.hh: src/cpu/ozone/lw_back_end_impl.hh: src/cpu/ozone/lw_lsq.hh: src/cpu/ozone/lw_lsq_impl.hh: src/cpu/ozone/thread_state.hh: src/cpu/simple/base.cc: src/cpu/simple_thread.cc: src/cpu/simple_thread.hh: src/cpu/thread_state.hh: src/dev/ide_disk.cc: src/python/m5/objects/O3CPU.py: src/python/m5/objects/Root.py: src/python/m5/objects/System.py: src/sim/pseudo_inst.cc: src/sim/pseudo_inst.hh: src/sim/system.hh: util/m5/m5.c: Hand merge. --HG-- rename : arch/alpha/ev5.cc => src/arch/alpha/ev5.cc rename : arch/alpha/freebsd/system.cc => src/arch/alpha/freebsd/system.cc rename : arch/alpha/isa/decoder.isa => src/arch/alpha/isa/decoder.isa rename : arch/alpha/isa/mem.isa => src/arch/alpha/isa/mem.isa rename : arch/alpha/isa_traits.hh => src/arch/alpha/isa_traits.hh rename : arch/alpha/linux/system.cc => src/arch/alpha/linux/system.cc rename : arch/alpha/system.cc => src/arch/alpha/system.cc rename : arch/alpha/tru64/system.cc => src/arch/alpha/tru64/system.cc rename : cpu/base.cc => src/cpu/base.cc rename : cpu/base.hh => src/cpu/base.hh rename : cpu/base_dyn_inst.hh => src/cpu/base_dyn_inst.hh rename : cpu/checker/cpu.hh => src/cpu/checker/cpu.hh rename : cpu/checker/cpu.cc => src/cpu/checker/cpu_impl.hh rename : cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc rename : cpu/checker/o3_cpu_builder.cc => src/cpu/o3/checker_builder.cc rename : cpu/o3/commit_impl.hh => src/cpu/o3/commit_impl.hh rename : cpu/o3/cpu.cc => src/cpu/o3/cpu.cc rename : cpu/o3/fetch_impl.hh => src/cpu/o3/fetch_impl.hh rename : cpu/o3/iew.hh => src/cpu/o3/iew.hh rename : cpu/o3/iew_impl.hh => src/cpu/o3/iew_impl.hh rename : cpu/o3/inst_queue.hh => src/cpu/o3/inst_queue.hh rename : cpu/o3/inst_queue_impl.hh => src/cpu/o3/inst_queue_impl.hh rename : cpu/o3/lsq_impl.hh => src/cpu/o3/lsq_impl.hh rename : cpu/o3/lsq_unit.hh => src/cpu/o3/lsq_unit.hh rename : cpu/o3/lsq_unit_impl.hh => src/cpu/o3/lsq_unit_impl.hh rename : cpu/o3/mem_dep_unit_impl.hh => src/cpu/o3/mem_dep_unit_impl.hh rename : cpu/o3/rename.hh => src/cpu/o3/rename.hh rename : cpu/o3/rename_impl.hh => src/cpu/o3/rename_impl.hh rename : cpu/o3/thread_state.hh => src/cpu/o3/thread_state.hh rename : cpu/o3/tournament_pred.cc => src/cpu/o3/tournament_pred.cc rename : cpu/o3/tournament_pred.hh => src/cpu/o3/tournament_pred.hh rename : cpu/checker/cpu_builder.cc => src/cpu/ozone/checker_builder.cc rename : cpu/ozone/cpu.hh => src/cpu/ozone/cpu.hh rename : cpu/ozone/cpu_builder.cc => src/cpu/ozone/cpu_builder.cc rename : cpu/ozone/cpu_impl.hh => src/cpu/ozone/cpu_impl.hh rename : cpu/ozone/front_end.hh => src/cpu/ozone/front_end.hh rename : cpu/ozone/front_end_impl.hh => src/cpu/ozone/front_end_impl.hh rename : cpu/ozone/inorder_back_end_impl.hh => src/cpu/ozone/inorder_back_end_impl.hh rename : cpu/ozone/inst_queue_impl.hh => src/cpu/ozone/inst_queue_impl.hh rename : cpu/ozone/lw_back_end.hh => src/cpu/ozone/lw_back_end.hh rename : cpu/ozone/lw_back_end_impl.hh => src/cpu/ozone/lw_back_end_impl.hh rename : cpu/ozone/lw_lsq.hh => src/cpu/ozone/lw_lsq.hh rename : cpu/ozone/lw_lsq_impl.hh => src/cpu/ozone/lw_lsq_impl.hh rename : cpu/ozone/simple_params.hh => src/cpu/ozone/simple_params.hh rename : cpu/ozone/thread_state.hh => src/cpu/ozone/thread_state.hh rename : cpu/simple/cpu.cc => src/cpu/simple/base.cc rename : cpu/cpu_exec_context.cc => src/cpu/simple_thread.cc rename : cpu/thread_state.hh => src/cpu/thread_state.hh rename : dev/ide_disk.hh => src/dev/ide_disk.hh rename : python/m5/objects/BaseCPU.py => src/python/m5/objects/BaseCPU.py rename : python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/O3CPU.py rename : python/m5/objects/OzoneCPU.py => src/python/m5/objects/OzoneCPU.py rename : python/m5/objects/Root.py => src/python/m5/objects/Root.py rename : python/m5/objects/System.py => src/python/m5/objects/System.py rename : sim/eventq.hh => src/sim/eventq.hh rename : sim/pseudo_inst.cc => src/sim/pseudo_inst.cc rename : sim/pseudo_inst.hh => src/sim/pseudo_inst.hh rename : sim/serialize.cc => src/sim/serialize.cc rename : sim/stat_control.cc => src/sim/stat_control.cc rename : sim/stat_control.hh => src/sim/stat_control.hh rename : sim/system.hh => src/sim/system.hh extra : convert_revision : 135d90e43f6cea89f9460ba4e23f4b0b85886e7d
2006-08-31add ISA_HAS_DELAY_SLOT directive instead of "#if THE_ISA == ALPHA_ISA" ↵Korey Sewell
throughout CPU models src/arch/alpha/isa_traits.hh: src/arch/mips/isa_traits.hh: src/arch/sparc/isa_traits.hh: define 'ISA_HAS_DELAY_SLOT' src/cpu/base_dyn_inst.hh: src/cpu/o3/bpred_unit_impl.hh: src/cpu/o3/commit_impl.hh: src/cpu/o3/cpu.cc: src/cpu/o3/cpu.hh: src/cpu/o3/decode_impl.hh: src/cpu/o3/fetch_impl.hh: src/cpu/o3/iew_impl.hh: src/cpu/o3/inst_queue_impl.hh: src/cpu/o3/rename_impl.hh: src/cpu/simple/base.cc: use ISA_HAS_DELAY_SLOT instead of THE_ISA == ALPHA_ISA --HG-- extra : convert_revision : 24c7460d9391e8d443c9fe08e17c331ae8e9c36a
2006-08-15Cleaned up include files and got rid of many using directives in header files.Gabe Black
--HG-- extra : convert_revision : 6b11e039cbc061dab75195fa1aebe6ca2cdc6f91