summaryrefslogtreecommitdiff
path: root/src/cpu/simple/base.hh
AgeCommit message (Collapse)Author
2016-08-15cpu, arch: fix the type used for the request flagsNikos Nikoleris
Change-Id: I183b9942929c873c3272ce6d1abd4ebc472c7132 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-01-17cpu. arch: add initiateMemRead() to ExecContext interfaceSteve Reinhardt
For historical reasons, the ExecContext interface had a single function, readMem(), that did two different things depending on whether the ExecContext supported atomic memory mode (i.e., AtomicSimpleCPU) or timing memory mode (all the other models). In the former case, it actually performed a memory read; in the latter case, it merely initiated a read access, and the read completion did not happen until later when a response packet arrived from the memory system. This led to some confusing things, including timing accesses being required to provide a pointer for the return data even though that pointer was only used in atomic mode. This patch splits this interface, adding a new initiateMemRead() function to the ExecContext interface to replace the timing-mode use of readMem(). For consistency and clarity, the readMemTiming() helper function in the ISA definitions is renamed to initiateMemRead() as well. For x86, where the access size is passed in explicitly, we can also get rid of the data parameter at this level. For other ISAs, where the access size is determined from the type of the data parameter, we have to keep the parameter for that purpose.
2015-10-12misc: Add explicit overrides and fix other clang >= 3.5 issuesAndreas Hansson
This patch adds explicit overrides as this is now required when using "-Wall" with clang >= 3.5, the latter now part of the most recent XCode. The patch consequently removes "virtual" for those methods where "override" is added. The latter should be enough of an indication. As part of this patch, a few minor issues that clang >= 3.5 complains about are also resolved (unused methods and variables).
2015-10-12misc: Remove redundant compiler-specific definesAndreas Hansson
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap (and similar) abstractions, as these are no longer needed with gcc 4.7 and clang 3.1 as minimum compiler versions.
2015-09-30cpu,isa,mem: Add per-thread wakeup logicMitch Hayenga
Changes wakeup functionality so that only specific threads on SMT capable cpus are woken.
2015-09-30config,cpu: Add SMT support to Atomic and Timing CPUsMitch Hayenga
Adds SMT support to the "simple" CPU models so that they can be used with other SMT-supported CPUs. Example usage: this enables the TimingSimpleCPU to be used to warmup caches before swapping to detailed mode with the in-order or out-of-order based CPU models.
2015-07-28revert 5af8f40d8f2cNilay Vaish
2015-07-26cpu: implements vector registersNilay Vaish
This adds a vector register type. The type is defined as a std::array of a fixed number of uint64_ts. The isa_parser.py has been modified to parse vector register operands and generate the required code. Different cpus have vector register files now.
2015-07-07sim: Refactor the serialization base classAndreas Sandberg
Objects that are can be serialized are supposed to inherit from the Serializable class. This class is meant to provide a unified API for such objects. However, so far it has mainly been used by SimObjects due to some fundamental design limitations. This changeset redesigns to the serialization interface to make it more generic and hide the underlying checkpoint storage. Specifically: * Add a set of APIs to serialize into a subsection of the current object. Previously, objects that needed this functionality would use ad-hoc solutions using nameOut() and section name generation. In the new world, an object that implements the interface has the methods serializeSection() and unserializeSection() that serialize into a named /subsection/ of the current object. Calling serialize() serializes an object into the current section. * Move the name() method from Serializable to SimObject as it is no longer needed for serialization. The fully qualified section name is generated by the main serialization code on the fly as objects serialize sub-objects. * Add a scoped ScopedCheckpointSection helper class. Some objects need to serialize data structures, that are not deriving from Serializable, into subsections. Previously, this was done using nameOut() and manual section name generation. To simplify this, this changeset introduces a ScopedCheckpointSection() helper class. When this class is instantiated, it adds a new /subsection/ and subsequent serialization calls during the lifetime of this helper class happen inside this section (or a subsection in case of nested sections). * The serialize() call is now const which prevents accidental state manipulation during serialization. Objects that rely on modifying state can use the serializeOld() call instead. The default implementation simply calls serialize(). Note: The old-style calls need to be explicitly called using the serializeOld()/serializeSectionOld() style APIs. These are used by default when serializing SimObjects. * Both the input and output checkpoints now use their own named types. This hides underlying checkpoint implementation from objects that need checkpointing and makes it easier to change the underlying checkpoint storage code.
2015-02-16arch: Make readMiscRegNoEffect const throughoutAndreas Hansson
Finally took the plunge and made this apply to all ISAs, not just ARM.
2015-01-25cpu: Remove all notion that we know when the cpu is misspeculating.Ali Saidi
We have no way of knowing if a CPU model is on the wrong path with our execute-in-execute CPU models. Don't pretend that we do.
2014-11-14arm: Fixes based on UBSan and static analysisAndreas Hansson
Another churn to clean up undefined behaviour, mostly ARM, but some parts also touching the generic part of the code base. Most of the fixes are simply ensuring that proper intialisation. One of the more subtle changes is the return type of the sign-extension, which is changed to uint64_t. This is to avoid shifting negative values (undefined behaviour) in the ISA code.
2014-11-06x86 isa: This patch attempts an implementation at mwait.Marc Orr
Mwait works as follows: 1. A cpu monitors an address of interest (monitor instruction) 2. A cpu calls mwait - this loads the cache line into that cpu's cache. 3. The cpu goes to sleep. 4. When another processor requests write permission for the line, it is evicted from the sleeping cpu's cache. This eviction is forwarded to the sleeping cpu, which then wakes up. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-20cpu: Remove unused deallocateContext callsMitch Hayenga
The call paths for de-scheduling a thread are halt() and suspend(), from the thread context. There is no call to deallocateContext() in general, though some CPUs chose to define it. This patch removes the function from BaseCPU and the cores which do not require it.
2014-09-19arch: Pass faults by const reference where possibleAndreas Hansson
This patch changes how faults are passed between methods in an attempt to copy as few reference-counting pointer instances as possible. This should avoid unecessary copies being created, contributing to the increment/decrement of the reference counters.
2014-09-03arch, cpu: Factor out the ExecContext into a proper base classAndreas Sandberg
We currently generate and compile one version of the ISA code per CPU model. This is obviously wasting a lot of resources at compile time. This changeset factors out the interface into a separate ExecContext class, which also serves as documentation for the interface between CPUs and the ISA code. While doing so, this changeset also fixes up interface inconsistencies between the different CPU models. The main argument for using one set of ISA code per CPU model has always been performance as this avoid indirect branches in the generated code. However, this argument does not hold water. Booting Linux on a simulated ARM system running in atomic mode (opt/10.linux-boot/realview-simple-atomic) is actually 2% faster (compiled using clang 3.4) after applying this patch. Additionally, compilation time is decreased by 35%.
2014-05-09cpu: add more instruction mix statisticsCurtis Dunham
For the o3, add instruction mix (OpClass) histogram at commit (stats also already collected at issue). For the simple CPUs we add a histogram of executed instructions
2014-02-09cpu: simple: Add support for using branch predictorsAndreas Sandberg
This changesets adds branch predictor support to the BaseSimpleCPU. The simple CPUs normally don't need a branch predictor, however, there are at least two cases where it can be desirable: 1) A simple CPU can be used to warm the branch predictor of an O3 CPU before switching to the slower O3 model. 2) The simple CPU can be used as a quick way of evaluating/debugging new branch predictors since it exposes branch predictor statistics. Limitations: * Since the simple CPU doesn't speculate, only one instruction will be active in the branch predictor at a time (i.e., the branch predictor will never see speculative branches). * The outcome of a branch prediction does not affect the performance of the simple CPU.
2013-10-15cpu: add a condition-code register classYasuko Eckert
Add a third register class for condition codes, in parallel with the integer and FP classes. No ISAs use the CC class at this point though.
2013-10-15cpu: rename *_DepTag constants to *_Reg_BaseSteve Reinhardt
Make these names more meaningful. Specifically, made these substitutions: s/FP_Base_DepTag/FP_Reg_Base/g; s/Ctrl_Base_DepTag/Misc_Reg_Base/g; s/Max_DepTag/Max_Reg_Index/g;
2013-01-12x86: Changes to decoder, corrects 9376Nilay Vaish
The changes made by the changeset 9376 were not quite correct. The patch made changes to the code which resulted in decoder not getting initialized correctly when the state was restored from a checkpoint. This patch adds a startup function to each ISA object. For x86, this function sets the required state in the decoder. For other ISAs, the function is empty right now.
2013-01-07cpu: Unify the serialization code for all of the CPU modelsAndreas Sandberg
Cleanup the serialization code for the simple CPUs and the O3 CPU. The CPU-specific code has been replaced with a (un)serializeThread that serializes the thread state / context of a specific thread. Assuming that the thread state class uses the CPU-specific thread state uses the base thread state serialization code, this allows us to restore a checkpoint with any of the CPU models.
2012-05-26CPU: Merge the predecoder and decoder.Gabe Black
These classes are always used together, and merging them will give the ISAs more flexibility in how they cache things and manage the process. --HG-- rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-25Decode: Make the Decoder class defined per ISA.Gabe Black
--HG-- rename : src/cpu/decode.cc => src/arch/generic/decoder.cc rename : src/cpu/decode.hh => src/arch/generic/decoder.hh
2012-03-09CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectableGeoffrey Blake
Enables the CheckerCPU to be selected at runtime with the --checker option from the configs/example/fs.py and configs/example/se.py configuration files. Also merges with the SE/FS changes.
2012-02-24CPU: Round-two unifying instr/data CPU ports across modelsAndreas Hansson
This patch continues the unification of how the different CPU models create and share their instruction and data ports. Most importantly, it forces every CPU to have an instruction and a data port, and gives these ports explicit getters in the BaseCPU (getDataPort and getInstPort). The patch helps in simplifying the code, make assumptions more explicit, andfurther ease future patches related to the CPU ports. The biggest changes are in the in-order model (that was not modified in the previous unification patch), which now moves the ports from the CacheUnit to the CPU. It also distinguishes the instruction fetch and load-store unit from the rest of the resources, and avoids the use of indices and casting in favour of keeping track of these two units explicitly (since they are always there anyways). The atomic, timing and O3 model simply return references to their already existing ports.
2012-02-12cpu: add separate stats for insts/ops both globally and per cpu modelAnthony Gutierrez
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-31CheckerCPU: Re-factor CheckerCPU to be compatible with current gem5Geoffrey Blake
Brings the CheckerCPU back to life to allow FS and SE checking of the O3CPU. These changes have only been tested with the ARM ISA. Other ISAs potentially require modification.
2012-01-29Implement Ali's review feedback.Gabe Black
Try to decrease indentation, and remove some redundant FullSystem checks.
2011-11-01SE/FS: Expose the same methods on the CPUs in SE and FS modes.Gabe Black
2011-09-19Syscall: Make the syscall function available in both SE and FS modes.Gabe Black
In FS mode the syscall function will panic, but the interface will be consistent and code which calls syscall can be compiled in. This will allow, for instance, instructions that use syscall to be built unconditionally but then not returned by the decoder.
2011-09-09Decode: Pull instruction decoding out of the StaticInst class into its own.Gabe Black
This change pulls the instruction decoding machinery (including caches) out of the StaticInst class and puts it into its own class. This has a few intrinsic benefits. First, the StaticInst code, which has gotten to be quite large, gets simpler. Second, the code that handles decode caching is now separated out into its own component and can be looked at in isolation, making it easier to understand. I took the opportunity to restructure the code a bit which will hopefully also help. Beyond that, this change also lays some ground work for each ISA to have its own, potentially stateful decode object. We'd be able to include less contextualizing information in the ExtMachInst objects since that context would be applied at the decoder. Also, the decoder could "know" ahead of time that all the instructions it's going to see are going to be, for instance, 64 bit mode, and it will have one less thing to check when it decodes them. Because the decode caching mechanism has been separated out, it's now possible to have multiple caches which correspond to different types of decoding context. Having one cache for each element of the cross product of different configurations may become prohibitive, so it may be desirable to clear out the cache when relatively static state changes and not to have one for each setting. Because the decode function is no longer universally accessible as a static member of the StaticInst class, a new function was added to the ThreadContexts that returns the applicable decode object.
2011-05-04CPU: Fix a case where timing simple cpu faults can nest.Ali Saidi
If we fault, change the state to faulting so that we don't fault again in the same cycle.
2011-04-15includes: sort all includesNathan Binkert
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2010-12-07O3: Make all instructions that write a misc. register not perform the write ↵Giacomo Gabrielli
until commit. ARM instructions updating cumulative flags (ARM FP exceptions and saturation flags) are not serialized. Added aliases for ARM FP exceptions and saturation flags in FPSCR. Removed write accesses to the FP condition codes for most ARM VFP instructions: only VCMP and VCMPE instructions update the FP condition codes. Removed a potential cause of seg. faults in the O3 model for NEON memory macro-ops (ARM).
2010-11-15O3: Make O3 support variably lengthed instructions.Gabe Black
2010-11-08ARM/Alpha/Cpu: Change prefetchs to be more like normal loads.Ali Saidi
This change modifies the way prefetches work. They are now like normal loads that don't writeback a register. Previously prefetches were supposed to call prefetch() on the exection context, so they executed with execute() methods instead of initiateAcc() completeAcc(). The prefetch() methods for all the CPUs are blank, meaning that they get executed, but don't actually do anything. On Alpha dead cache copy code was removed and prefetches are now normal ops. They count as executed operations, but still don't do anything and IsMemRef is not longer set on them. On ARM IsDataPrefetch or IsInstructionPreftech is now set on all prefetch instructions. The timing simple CPU doesn't try to do anything special for prefetches now and they execute with the normal memory code path.
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-08-31CPU: Get rid of the unused ev5_trap function on the simple and checker CPUs.Gabe Black
2010-08-23CPU: Make Exec trace to print predication result (if false) for memory ↵Min Kyu Jeong
instructions
2010-08-23ARM/O3: store the result of the predicate evaluation in DynInst or Threadstate.Min Kyu Jeong
THis allows the CPU to handle predicated-false instructions accordingly. This particular patch makes loads that are predicated-false to be sent straight to the commit stage directly, not waiting for return of the data that was never requested since it was predicated-false.
2010-06-03Minor remote GDB cleanup.Steve Reinhardt
Expand the help text on the --remote-gdb-port option so people know you can use it to disable remote gdb without reading the source code, and thus don't waste any time trying to add a separate option to do that. Clean up some gdb-related cruft I found while looking for where one would add a gdb disable option, before I found the comment that told me that I didn't need to do that.
2010-03-23cpu: fix exec tracing memory corruption bugSteve Reinhardt
Accessing traceData (to call setAddress() and/or setData()) after initiating a timing translation was causing crashes, since a failed translation could delete the traceData object before returning. It turns out that there was never a need to access traceData after initiating the translation, as the traced data was always available earlier; this ordering was merely historical. Furthermore, traceData->setAddress() and traceData->setData() were being called both from the CPU model and the ISA definition, often redundantly. This patch standardizes all setAddress and setData calls for memory instructions to be in the CPU models and not in the ISA definition. It also moves those calls above the translation calls to eliminate the crashes.
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-07-08Registers: Get rid of the float register width parameter.Gabe Black
2009-05-26types: add a type for thread IDs and try to use it everywhereNathan Binkert
2009-03-05stats: Fix all stats usages to deal with template fixesNathan Binkert