summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28Clock: Rework clocks to avoid tick-to-cycle transformationsAndreas Hansson
This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28Port: Stricter port bind/unbind semanticsAndreas Hansson
This patch tightens up the semantics around port binding and checks that the ports that are being bound are currently not connected, and similarly connected before unbind is called. The patch consequently also changes the order of the unbind and bind for the switching of CPUs to ensure that the rules are adhered to. Previously the ports would be "over-written" without any check. There are no changes in behaviour due to this patch, and the only place where the unbind functionality is used is in the CPU.
2012-08-28Checker: Fix checker CPU portsAndreas Hansson
This patch updates how the checker CPU handles the ports such that the regressions will once again run without causing a panic. A minor amount of tidying up was also done as part of this patch.
2012-08-27Ruby: Remove RubyEventQueueNilay Vaish
This patch removes RubyEventQueue. Consumer objects now rely on RubySystem or themselves for scheduling events.
2012-08-22Packet: Remove NACKs from packet and its use in endpointsAndreas Hansson
This patch removes the NACK frrom the packet as there is no longer any module in the system that issues them (the bridge was the only one and the previous patch removes that). The handling of NACKs was mostly avoided throughout the code base, by using e.g. panic or assert false, but in a few locations the NACKs were actually dealt with (although NACKs never occured in any of the regressions). Most notably, the DMA port will now never receive a NACK and the backoff time is thus never changed. As a consequence, the entire backoff mechanism (similar to a PCI bus) is now removed and the DMA port entirely relies on the bus performing the arbitration and issuing a retry when appropriate. This is more in line with e.g. PCIe. Surprisingly, this patch has no impact on any of the regressions. As mentioned in the patch that removes the NACK from the bridge, a follow-up patch should change the request and response buffer size for at least one regression to also verify that the system behaves as expected when the bridge fills up.
2012-08-21CPU: Remove overloaded function_trace_start parameterAndreas Hansson
This patch removes the overloading of the parameter, which seems both redundant, and possibly incorrect. The inorder CPU is particularly interesting as it uses a different name for the parameter, and never make any use of it internally.
2012-08-21Clock: Make Tick unsigned and remove UTickAndreas Hansson
This patch makes the Tick unsigned and removes the UTick typedef. The ticks should never be negative, and there was only one major issue with removing it, caused by the o3 CPU using a -1 as an initial value. The patch has no impact on any regressions.
2012-08-21Clock: Move the clock and related functions to ClockedObjectAndreas Hansson
This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-15O3,ARM: fix some problems with drain/switchout functionality and add Drain ↵Anthony Gutierrez
DPRINTFs This patch fixes some problems with the drain/switchout functionality for the O3 cpu and for the ARM ISA and adds some useful debug print statements. This is an incremental fix as there are still a few bugs/mem leaks with the switchout code. Particularly when switching from an O3CPU to a TimingSimpleCPU. However, when switching from O3 to O3 cores with the ARM ISA I haven't encountered any more assertion failures; now the kernel will typically panic inside of simulation.
2012-08-06process: add progName() virtual functionSteve Reinhardt
This replaces a (potentially uninitialized) string field with a virtual function so that we can have a safe interface without requiring changes to the eio code.
2012-07-27checker: make checker cpu id match its host's cpu idAnthony Gutierrez
when using the checker i ran into problems where an instruction reading the cpu id register failed because the ids did not match, and hence, the result of the instruction did not match. this patch ensures that the ids match so this instruction does not fail. this problem only seemed to manifest itself when multiple cores were in the system, either multi-core, or extra switched- out cores present in the system.
2012-07-10ruby: remove the cpu assumptions for the random testerBrad Beckmann
2012-07-10cpu: added assertions to ensure the correct proxies are usedBrad Beckmann
2012-07-09Port: Align port names in C++ and PythonAndreas Hansson
This patch is a first step to align the port names used in the Python world and the C++ world. Ultimately it serves to make the use of config.json together with output from the simulation easier, including post-processing of statistics. Most notably, the CPU, cache, and bus is addressed in this patch, and there might be other ports that should be updated accordingly. The dash name separator has also been replaced with a "." which is what is used to concatenate the names in python, and a separation is made between the master and slave port in the bus.
2012-07-09Port: Move retry from port base class to Master/SlavePortAndreas Hansson
This patch is the last part of moving all protocol-related functionality out of the Port base class. All the send/recv functions are already moved, and the retry (which still governs all the timing transport functions) is the only part that remained in the base class. The only point where this currently causes a bit of inconvenience is in the bus where the retry list is global and holds Port pointers (not Master/SlavePort). This is about to change with the split into a request/response bus and will soon be removed anyway. The patch has no impact on any regressions.
2012-07-09Fix: Address a few benign memory leaksAndreas Hansson
This patch is the result of static analysis identifying a number of memory leaks. The leaks are all benign as they are a result of not deallocating memory in the desctructor. The fix still has value as it removes false positives in the static analysis.
2012-06-29O3: Track if the RAS has been pushed or not to pop the RAS if neccessary.Nathanael Premillieu
Add new flag (named pushedRAS) in the PredictorHistory structure. This flag tracks whether the RAS has been pushed or not during a prediction. Then, in the squash function it is used to pop the RAS if necessary.
2012-06-08Timing CPU: Remove a redundant port pointerAndreas Hansson
This patch is trivial and merely prunes a pointer that was never set or used.
2012-06-05cpu: Don't init simple and inorder CPUs if they are defered.Anthony Gutierrez
initCPU() will be called to initialize switched out CPUs for the simple and inorder CPU models. this patch prevents those CPUs from being initialized because they should get their state from the active CPU when it is switched out.
2012-06-05ISA: Back-out NoopMachInst as a StaticInstPtr change.Ali Saidi
2012-06-05O3: Clean up the O3 structures and try to pack them a bit better.Ali Saidi
DynInst is extremely large the hope is that this re-organization will put the most used members close to each other.
2012-06-05sim: Remove FastAllocAli Saidi
While FastAlloc provides a small performance increase (~1.5%) over regular malloc it isn't thread safe. After removing FastAlloc and using tcmalloc I've seen a performance increase of 12% over libc malloc when running twolf for ARM.
2012-06-04ISA: Turn the ExtMachInst NoopMachinst into the StaticInstPtr NoopStaticInst.Gabe Black
This eliminates a use of the ExtMachInst type outside of the ISAs.
2012-05-31Bus: Split the bus into a non-coherent and coherent busAndreas Hansson
This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-05-30Packet: Unify the use of PortID in packet and portAndreas Hansson
This patch removes the Packet::NodeID typedef and unifies it with the Port::PortId. The src and dest fields in the packet are used to hold a port id (e.g. in the bus), and thus the two should actually be the same. The typedef PortID is now global (in base/types.hh) and aligned with the ThreadID in terms of capitalisation and naming of the InvalidPortID constant. Before this patch, two flags were used for valid destination and source, rather than relying on a named value (InvalidPortID), and this is now redundant, as the src and dest field themselves are sufficient to tell whether the current value is a valid port identifier or not. Consequently, the VALID_SRC and VALID_DST are removed. As part of the cleaning up, a number of int parameters and local variables are updated to use PortID. Note that Ruby still has its own NodeID typedef. Furthermore, the MemObject getMaster/SlavePort still has an int idx parameter with a default value of -1 which should eventually change to PortID idx = InvalidPortID.
2012-05-26ISA,CPU: Generalize and split out the components of the decode cache.Gabe Black
This will allow it to be specialized by the ISAs. The existing caching scheme is provided by the BasicDecodeCache in the GenericISA namespace and is built from the generalized components. --HG-- rename : src/cpu/decode_cache.cc => src/arch/generic/decode_cache.cc
2012-05-26CPU: Merge the predecoder and decoder.Gabe Black
These classes are always used together, and merging them will give the ISAs more flexibility in how they cache things and manage the process. --HG-- rename : src/arch/x86/predecoder_tables.cc => src/arch/x86/decoder_tables.cc
2012-05-25ISA: Make the decode function part of the ISA's decoder.Gabe Black
2012-05-25CPU: Simplify the implementation of the decode cache.Gabe Black
Also reorganize it to make it more amenable to being rearranged later.
2012-05-25Decode: Make the Decoder class defined per ISA.Gabe Black
--HG-- rename : src/cpu/decode.cc => src/arch/generic/decoder.cc rename : src/cpu/decode.hh => src/arch/generic/decoder.hh
2012-05-10gem5: fix some iterator use and erase bugsAli Saidi
2012-05-10gem5: fix a number of use after free issuesAli Saidi
2012-05-01MEM: Separate requests and responses for timing accessesAndreas Hansson
This patch moves send/recvTiming and send/recvTimingSnoop from the Port base class to the MasterPort and SlavePort, and also splits them into separate member functions for requests and responses: send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq, send/recvTimingSnoopResp. A master port sends requests and receives responses, and also receives snoop requests and sends snoop responses. A slave port has the reciprocal behaviour as it receives requests and sends responses, and sends snoop requests and receives snoop responses. For all MemObjects that have only master ports or slave ports (but not both), e.g. a CPU, or a PIO device, this patch merely adds more clarity to what kind of access is taking place. For example, a CPU port used to call sendTiming, and will now call sendTimingReq. Similarly, a response previously came back through recvTiming, which is now recvTimingResp. For the modules that have both master and slave ports, e.g. the bus, the behaviour was previously relying on branches based on pkt->isRequest(), and this is now replaced with a direct call to the apprioriate member function depending on the type of access. Please note that send/recvRetry is still shared by all the timing accessors and remains in the Port base class for now (to maintain the current bus functionality and avoid changing the statistics of all regressions). The packet queue is split into a MasterPort and SlavePort version to facilitate the use of the new timing accessors. All uses of the PacketQueue are updated accordingly. With this patch, the type of packet (request or response) is now well defined for each type of access, and asserts on pkt->isRequest() and pkt->isResponse() are now moved to the appropriate send member functions. It is also worth noting that sendTimingSnoopReq no longer returns a boolean, as the semantics do not alow snoop requests to be rejected or stalled. All these assumptions are now excplicitly part of the port interface itself.
2012-04-25MEM: Add the PortId type and a corresponding id field to PortAndreas Hansson
This patch introduces the PortId type, moves the definition of INVALID_PORT_ID to the Port class, and also gives every port an id to reflect the fact that each element in a vector port has an identifier/index. Previously the bus and Ruby testers (and potentially other users of the vector ports) added the id field in their port subclasses, and now this functionality is always present as it is moved to the base class.
2012-04-15CPU: Tidy up some formatting and a DPRINTF in the simple CPU base class.Gabe Black
Put the { on the same line as the if and put a space between the if and the open paren. Also, use the # format modifier which puts a 0x in front of hex values automatically. If the ExtMachInst type isn't integral and actually prints something more complicated, the # falls away harmlessly and we aren't left with a phantom 0x followed by a bunch of unrelated text.
2012-04-14Ruby: Use MasterPort base-class pointers where possibleAndreas Hansson
This patch simplifies future patches by changing the pointer type used in a number of the Ruby testers to use MasterPort instead of using a derived CpuPort class. There is no reason for using the more specialised pointers, and there is no longer a need to do any casting. With the latest changes to the tester, organising ports as readers and writes, things got a bit more complicated, and the "type" now had to be removed to be able to fall back to using MasterPort rather than CpuPort.
2012-04-14MEM: Remove the Broadcast destination from the packetAndreas Hansson
This patch simplifies the packet by removing the broadcast flag and instead more firmly relying on (and enforcing) the semantics of transactions in the classic memory system, i.e. request packets are routed from a master to a slave based on the address, and when they are created they have neither a valid source, nor destination. On their way to the slave, the request packet is updated with a source field for all modules that multiplex packets from multiple master (e.g. a bus). When a request packet is turned into a response packet (at the final slave), it moves the potentially populated source field to the destination field, and the response packet is routed through any multiplexing components back to the master based on the destination field. Modules that connect multiplexing components, such as caches and bridges store any existing source and destination field in the sender state as a stack (just as before). The packet constructor is simplified in that there is no longer a need to pass the Packet::Broadcast as the destination (this was always the case for the classic memory system). In the case of Ruby, rather than using the parameter to the constructor we now rely on setDest, as there is already another three-argument constructor in the packet class. In many places where the packet information was printed as part of DPRINTFs, request packets would be printed with a numeric "dest" that would always be -1 (Broadcast) and that field is now removed from the printing.
2012-04-14MEM: Separate snoops and normal memory requests/responsesAndreas Hansson
This patch introduces port access methods that separates snoop request/responses from normal memory request/responses. The differentiation is made for functional, atomic and timing accesses and builds on the introduction of master and slave ports. Before the introduction of this patch, the packets belonging to the different phases of the protocol (request -> [forwarded snoop request -> snoop response]* -> response) all use the same port access functions, even though the snoop packets flow in the opposite direction to the normal packet. That is, a coherent master sends normal request and receives responses, but receives snoop requests and sends snoop responses (vice versa for the slave). These two distinct phases now use different access functions, as described below. Starting with the functional access, a master sends a request to a slave through sendFunctional, and the request packet is turned into a response before the call returns. In a system without cache coherence, this is all that is needed from the functional interface. For the cache-coherent scenario, a slave also sends snoop requests to coherent masters through sendFunctionalSnoop, with responses returned within the same packet pointer. This is currently used by the bus and caches, and the LSQ of the O3 CPU. The send/recvFunctional and send/recvFunctionalSnoop are moved from the Port super class to the appropriate subclass. Atomic accesses follow the same flow as functional accesses, with request being sent from master to slave through sendAtomic. In the case of cache-coherent ports, a slave can send snoop requests to a master through sendAtomicSnoop. Just as for the functional access methods, the atomic send and receive member functions are moved to the appropriate subclasses. The timing access methods are different from the functional and atomic in that requests and responses are separated in time and send/recvTiming are used for both directions. Hence, a master uses sendTiming to send a request to a slave, and a slave uses sendTiming to send a response back to a master, at a later point in time. Snoop requests and responses travel in the opposite direction, similar to what happens in functional and atomic accesses. With the introduction of this patch, it is possible to determine the direction of packets in the bus, and no longer necessary to look for both a master and a slave port with the requested port id. In contrast to the normal recvFunctional, recvAtomic and recvTiming that are pure virtual functions, the recvFunctionalSnoop, recvAtomicSnoop and recvTimingSnoop have a default implementation that calls panic. This is to allow non-coherent master and slave ports to not implement these functions.
2012-04-14clang/gcc: Fix compilation issues with clang 3.0 and gcc 4.6Andreas Hansson
This patch addresses a number of minor issues that cause problems when compiling with clang >= 3.0 and gcc >= 4.6. Most importantly, it avoids using the deprecated ext/hash_map and instead uses unordered_map (and similarly so for the hash_set). To make use of the new STL containers, g++ and clang has to be invoked with "-std=c++0x", and this is now added for all gcc versions >= 4.6, and for clang >= 3.0. For gcc >= 4.3 and <= 4.5 and clang <= 3.0 we use the tr1 unordered_map to avoid the deprecation warning. The addition of c++0x in turn causes a few problems, as the compiler is more stringent and adds a number of new warnings. Below, the most important issues are enumerated: 1) the use of namespaces is more strict, e.g. for isnan, and all headers opening the entire namespace std are now fixed. 2) another other issue caused by the more stringent compiler is the narrowing of the embedded python, which used to be a char array, and is now unsigned char since there were values larger than 128. 3) a particularly odd issue that arose with the new c++0x behaviour is found in range.hh, where the operator< causes gcc to complain about the template type parsing (the "<" is interpreted as the beginning of a template argument), and the problem seems to be related to the begin/end members introduced for the range-type iteration, which is a new feature in c++11. As a minor update, this patch also fixes the build flags for the clang debug target that used to be shared with gcc and incorrectly use "-ggdb".
2012-04-06rubytest: remove spurious printfBrad Beckmann
2012-04-06rubytest: seperated read and write ports.Brad Beckmann
This patch allows the ruby tester to support protocols where the i-cache and d-cache are managed by seperate controllers.
2012-04-06MEM: Enable multiple distributed generalized memoriesAndreas Hansson
This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-04-05NetworkTest: remove unnecessary memory allocationTushar Krishna
2012-04-03Atomic: Remove the physmem_port and access memory directlyAndreas Hansson
This patch removes the physmem_port from the Atomic CPU and instead uses the system pointer to access the physmem when using the fastmem option. The system already keeps track of the physmem and the valid memory address ranges, and with this patch we merely make use of that existing functionality. As a result of this change, the overloaded getMasterPort in the Atomic CPU can be removed, thus unifying the CPUs.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-30CPU: Unify initMemProxies across CPUs and simulation modesAndreas Hansson
This patch unifies where initMemProxies is called, in the init() method of each BaseCPU subclass, before TheISA::initCPU is called. Moreover, it also ensures that initMemProxies is called in both full-system and syscall-emulation mode, thus unifying also across the modes. An additional check is added in the ThreadState to ensure that initMemProxies is only called once.
2012-03-22Scons: Remove Werror=False in SConscript filesAndreas Hansson
This patch removes the overriding of "-Werror" in a handful of cases. The code compiles with gcc 4.6.3 and clang 3.0 without any warnings, and thus without any errors. There are no functional changes introduced by this patch. In the future, rather than ypassing "-Werror", address the warnings.
2012-03-21O3: Fix sizing of decode to rename skid buffer.Andrew Lukefahr
2012-03-21O3: Fix size of skid buffer between fetch and decode when widths are differentBrian Grayson