| Age | Commit message (Collapse) | Author |
|---|
|
|
|
In the atomic model a dynamic_pointer_cast is performed at every tick to
check if the fault is a SyscallRetryFault. This was happening even when
there was no generated fault.
Change-Id: I7f4afeffffdf4f988230e05286602d8d9a919c6c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10101
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
These typedefs aren't used, and they expose ISA specific types outside
the ISA implementations.
Change-Id: I64b9cec18d6f92765eebbdf8c8f1de15c0deba34
Reviewed-on: https://gem5-review.googlesource.com/9404
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This doesn't completely hide the ISA specific ExtMachInst type inside
the ISAs since it still gets applied in arch/generic, but it at least
pulls it into the arch directory.
Change-Id: Ic2188d59696530d7ecafdff0785d71867182701d
Reviewed-on: https://gem5-review.googlesource.com/9403
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The instruction representation is already encoded in the trace
protobuf, so there's no reason to encode a part of it again. This is
especially true since this supposedly generic code is extracting the
first 8 bits of the machInst, a totally arbitrary set of bits for most
ISAs. If certain bits within a machine instruction are actually
relevant, the consumer of the trace should be able to interpret the
instruction bytes which are already there and extract the same bits
within the context of whatever ISA they're appropriate for.
Change-Id: Idaebe6a110d7d4812c3d7c434582d5a9470bcec1
Reviewed-on: https://gem5-review.googlesource.com/9401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Use this function to get the binary representation of the instruction
rather than referencing the ExtMachInst typed machInst member of the
StaticInst directly. ExtMachInst is an ISA specific type and can't
always be straightforwardly squished into a 32 bit integer.
Change-Id: Ic1f74d6d86eb779016677ae45c022939ce3e2b9f
Reviewed-on: https://gem5-review.googlesource.com/7563
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This function takes a pointer to a buffer and the current size of the
buffer as a pass by reference argument. If the size of the buffer is
sufficient, the function stores a binary representation of itself
(generally the ISA defined instruction encoding) in the buffer, and
sets the size argument to how much space it used. This could be used
by ISAs which have two instruction sizes (ARM and thumb, for example).
If the buffer size isn't sufficient, then the size parameter should be
set to what size is required, and then the function should return
without modifying the buffer.
The buffer itself should be aligned to the same standard as memory
returned by new, specifically "The pointer returned shall be suitably
aligned so that it can be converted to a pointer of any complete object
type and then used to access the object or array in the storage
allocated...". This will avoid having to memcpy buffers to avoid
unaligned accesses.
To standardize the representation of the data, it should be stored in
the buffer as little endian. Since most hosts (including ARM and x86
hosts) will be little endian, this will almost always be a no-op.
Change-Id: I2f31aa0b4f9c0126b44f47a881c2901243279bd6
Reviewed-on: https://gem5-review.googlesource.com/7562
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Added fix in the invalid transition panic and various places in ruby
random tester.
Change-Id: I879264da58369faf7de49d1a28b2da1cb935ef0a
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/8941
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Starting with version 3, scons imposes using the print function instead
of the print statement in code it processes. To get things building
again, this change moves all python code within gem5 to use the
function version. Another change by another author separately made this
same change to the site_tools and site_init.py files.
Change-Id: I2de7dc3b1be756baad6f60574c47c8b7e80ea3b0
Reviewed-on: https://gem5-review.googlesource.com/8761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
There are cases where the IEW adds a non-speculative instruction to
the IQ twice. This can happen if an instruction is flagged as
IsMemBarrier and IsNonSpeculative. Avoid adding non-speculative
instructions in the IEW to the IQ by checking if it has been added
already.
Change-Id: Ifcff676a451b57b2406ce00ed8dae19ed399515f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Javier Setoain <javier.setoain@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8374
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
MinorCPU was not handling IsSquashAfter flagged instructions. The
behaviour was to force a branch (hence enforcing refetching) for
SerializeAfter instructions only. This has now been extended to
SquashAfter in order to correctly support ISB barrier instruction
behaviour.
Change-Id: Ie525b23350b0de121372d3b98b433e36b097d5c4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5702
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Equips cpu models with a method to generate the cpu node.
Note: even though official documentation requires that CPU ids start
counting from 0 in every cluster, GEM5 requires a globally unique cpu_id.
Change-Id: Ida3e17af3124a68ef7dbf2449cd034dfc3ec39df
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5963
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Before this CL, the addTwoLevelCacheHierarchy() function uses the
default L2XBar class as the interconnect between CPU L1 caches and
L2. This CL allows passing a user-defined bus to overwrite the
default L2XBar by adding an optional argument to the function.
Change-Id: I917657272fd4924ee0bed882a226851afba26847
Reviewed-on: https://gem5-review.googlesource.com/7364
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This is instead of the architecture specific version.
Change-Id: I906ec16eee1f65f0e9b9c24b401430f9ea01637b
Reviewed-on: https://gem5-review.googlesource.com/7349
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Several files in the repository were tracked with execute permissions
even though the files are just normal C/C++ files (and the one .isa).
Change-Id: I976b096acab4a1fc74c5699ef1f9b222c1e635c2
Reviewed-on: https://gem5-review.googlesource.com/7241
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This constant is, first, a #define, and second only used in one place.
In that one place, it appears that the code it guards is no longer
necessary in general. It was originally written to avoid refetching a
block of data that you're still in, even if you've moved slightly
farther in it because you're skipping the next instruction due to an
annulled branch delay slot. In reality however, in SPARC, the one ISA
I'm aware of which has this sort of branching behavior, the PC state
object will correctly determine that no branch is happening in these
cases. Code lower down in the loop will then recompute where fetching
should continue based on the next PC, automatically skipping the
annulled branch slot without misinterpretting the gap as a branch.
This change therefore also removes this block of code.
Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c
Reviewed-on: https://gem5-review.googlesource.com/6821
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When a fault happens in fetch in O3, a dummy inst is created to carry
the fault through the pipeline to commit, but conceptually there isn't
actually any instruction since we failed to fetch one.
This change marks the dummy instruction as NotAnInst, and when any
such instruction gets to commit, the fault object associated with it
is invoked and passed a null static inst pointer instead of a pointer
to the dummy inst.
Change-Id: I18d993083406deb625402e06af4ba0d4772ca5a3
Reviewed-on: https://gem5-review.googlesource.com/7124
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This flag means that the instruction isn't an actual instruction, it's
just a placeholder to carry a fault down a pipeline, for instance.
Change-Id: I1cc12b068662dbd3d3b089c9941a07b6e88b57e3
Reviewed-on: https://gem5-review.googlesource.com/7123
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Get rid of some remnants of a system which was intended to separate
address computation into its own instruction object.
Change-Id: I23f9ffd70fcb89a8ea5bbb934507fb00da9a0b7f
Reviewed-on: https://gem5-review.googlesource.com/7122
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.
This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.
The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.
A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.
Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This removes a dependence on the ISA.
Change-Id: I01013bc70558f0831327213912bcac11258066a6
Reviewed-on: https://gem5-review.googlesource.com/6824
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This can be used whenever generic code needs a filler instruction that
doesn't do anything.
Change-Id: Ib245d3e880a951e229eb315a09ecc7c47e6ae00f
Reviewed-on: https://gem5-review.googlesource.com/6823
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I868021a01eb3e7902a4d64283bdfaa93c6d9f964
Reviewed-on: https://gem5-review.googlesource.com/6822
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Added the ExitGen to the TrafficGenerator which allows an EXIT
state to be added to the TrafficGen configuration file. Entering this
state will cause the simulation to exit immediately. Please note that
if multiple TrafficGen instances have an EXIT state, the first of these
to be encountered will cause the simulation to terminate.
Change-Id: Ieea51f05ffb780771f007787a2b119f79143d0c1
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5723
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I2372a0a88e276dcb0c06c3d0a789e010cfba8013
Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5722
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Replace them with std::array<>s.
Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34
Reviewed-on: https://gem5-review.googlesource.com/6602
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Neither of these were used, particularly memAccInst.
Change-Id: I4ac9e44cf624e5de42519d586d7b699f08a2cdfc
Reviewed-on: https://gem5-review.googlesource.com/6601
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Print faulting instruction for unmapped address panic in faults.cc
and print extra info about corresponding fetched PC in base.cc.
Change-Id: Id9e15d3e88df2ad6b809fb3cf9f6ae97e9e97e0f
Reviewed-on: https://gem5-review.googlesource.com/6461
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Cache maintenance operations go through the write channel of the
cpu. This changes makes sure that the cpu does not try to fill in the
packet with data.
Change-Id: Ic83205bb1cda7967636d88f15adcb475eb38d158
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5055
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The BaseCPU.createThreads() method currently overrides the BaseCPU.isa
parameter. This is sometimes undesirable. Change the behavior so that
the default value for the isa parameter is the empty list and teach
createThreads() to only override the ISA if none has been specified.
Change-Id: I2ac5535e55fc57057e294d3c6a93088b33bf7b84
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6121
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I811b552989caf3601ac65a128dbee6b7bb405d7f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Updated to use IsVector instruction flag. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5732
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
All of the O3 vector stats added by 'arch: ISA parser additions of
vector registers' are currently missing their stat initializers. Add
the missing stat initialization to InstructionQueue::regStats.
Change-Id: Idc4b8e2824120a2542d8a604340a1b41bde6aa28
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6101
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.
Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Suspending the current thread context while draining due to a quiesce
pseudo instruction (for example a wfi instruction) could deadlock the
cpu and prevent it from successfully draining. This change ensures
that the cpu is not draining before suspending the thread context.
Change-Id: I7c019847f5a870d4bc9ce2b19936bc3dc45e5fd7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5881
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Add the power_gating_on_idle option to control whether a core
automatically enters the power gated state. The default behaviour is
to transition to clock gated when idle, but not to power gated. When
this option is set to true, the core automatically transitions to the
power gated state after a configurable latency.
Change-Id: Ida98c7fc532de4140d0e511c25613769b47b3702
Reviewed-on: https://gem5-review.googlesource.com/5741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the CPU has been clock gated for a sufficient amount of time
(configurable via pwrGatingLatency), the CPU will go into the OFF
power state. This does not model hardware, just behaviour.
Change-Id: Ib3681d1ffa6ad25eba60f47b4020325f63472d43
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I017852eac183fac3f914fdb96d7e72a56ea9d682
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5121
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Fixes compile error for gem5.fast on CLANG due to unused variable.
Change-Id: Iabe777a27d75ee8bfa7b214fff577aed3c7582c7
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4980
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The size of the store entry in the LSQ is used to indicate a fault in
the execution of the store. At the same time, a store that is
predicated false will also have 0 size in the corresponding store
queue entry. This changeset ensures that we check if the store was
predicated false before checking the size field. This way we avoid
printing stores as faulting when they are only predicated false.
Change-Id: Ie07982197bd73d7b44d26a3257d54ecb103a952a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4821
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The O3CPU allows stores to commit before they are completed and as
soon as they enter the store queue. This is the reason why stores are
verified by the the checker CPU, separately, once they complete
and after they are sent to the memory.
Store conditionals, on the other hand, have an additional writeback
stage in the pipeline as they return their result to a register,
similarly to loads. This is the reason why they do not commit
before they receive a response from the memory. This allows store
conditionals to be verified by the checker CPU as soon as they
commit in the same way as all other non-store insturctions.
At the same time, the presense of a checker CPU should not require
changes to way we handle instructions. This change removes explicit
calls to:
* incorrectly set the extra data of the request to 0 (a subsequent
call to completeAcc already does this without making any ISA
assumptions about the return value of the failed store conditional)
* complete failing store conditionals
Change-Id: If21d70b21caa55b35e9fdcc50f254c590465d3c3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4820
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The kernel stat mechanism should really be refactored and moved somewhere
else, but in the mean time there's some old cruft that can be cleared away.
Change-Id: I21e725de590dda0d20bf3bc675bbe976c7b1bd86
Reviewed-on: https://gem5-review.googlesource.com/4600
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When different sizes were set for the choice and global saturation
counter (e.g. ex5_big), the threshold calculation used the wrong
size. Thus the branch predictor always predicted "not taken" for
choice > global.
Change-Id: I076549ff1482e2280cef24a0d16b7bb2122d4110
Reviewed-on: https://gem5-review.googlesource.com/4560
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Coverage was wrongly set to PartialAddrRangeCoverage in the case of
disjoint adjacent ranges
Change-Id: I29aaf5145e6cdcf5f0b8f4e009d57ee57bd4c944
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4640
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When a split load hits a memory region where IPRs are mapped, the
Writebackevent which is scheduled for that was carrying a data packet
that was not correctly initialized which caused an assertion to fire
when the Writeback event is processed.
Change-Id: I71a4e291f0086f7468d7e8124a0a8f098088972f
Signed-off-by: Matthias Hille <matthiashille8@gmail.com>
Reported-by: Matthias Hille <matthiashille8@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/4620
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The VM's event queue is normally used for devices in multi-core KVM
mode. Add a helper method, BaseKvmCPU::deviceEventQueue(), to access
this queue. This makes the intention of code migrating to device event
queues clearer.
Change-Id: Ifb10f553a6d7445c8d562f658cf9d0b1f4c577ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4287
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The KVM CPU sometimes needs to access devices when drain() is
called. This typically happens on ARM when synchronizing devices that
use the system register interface. When called from drain(), the event
queue isn't locked since drain is called from the outside when the
simulator isn't servicing any events. In such cases, performing a
migration to the device's queue will unlock a mutex that isn't
locked. This typically results in a deadlock when resuming the system
since the lock will be in an undefined state.
Change-Id: Ibdcc2e034e916a929124f297e72aae306cf66728
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4286
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The introduction of a new vector register class broke rename in the O3
CPU due to an unhandled register class in
DefaultRename<Impl>::renameSrcRegs(). This patch fixes adds the
necessary handling to avoid a panic when the vector register file is
used.
Change-Id: Ie380ab35ec4a151db15402f25b25b58931ee0581
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4140
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
