summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-12inorder: MDU deadlock fixMaximilien Breughe
2012-01-10DPRINTF: Improve some dprintf messages.Nilay Vaish
2012-01-09CPU: Remove Alpha-specific PC alignment check.Anders Handler
2012-01-09O3: Remove some asserts that no longer seem to be valid.Ali Saidi
2012-01-09O3: Add support of function tracing with O3 CPU.Ali Saidi
2012-01-09MAC: Make gem5 compile and run on MacOSX 10.7.2Andreas Hansson
Adaptations to make gem5 compile and run on OSX 10.7.2, with a stock gcc 4.2.1 and the remaining dependencies from macports, i.e. python 2.7,.2 swig 2.0.4, mercurial 2.0. The changes include an adaptation of the SConstruct to handle non-library linker flags, and Darwin-specific code to find the memory usage of gem5. A number of Ruby files relied on ambigious uint (without the 32 suffix) which caused compilation errors.
2011-12-13gcc: fix unused variable warnings from GCC 4.6.1Nathan Binkert
--HG-- extra : rebase_source : f9e22de341493a25ac6106c16ac35c61c128a080
2011-12-01Output: Add hierarchical output support and cleanup existing codebase.Chris Emmons
--HG-- extra : rebase_source : 3301137733cdf5fdb471d56ef7990e7a3a865442
2011-12-01O3: Remove hardcoded tgts_per_mshr in O3CPU.py.Chander Sudanthi
There are two lines in O3CPU.py that set the dcache and icache tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr. This patch removes these hardcoded lines from O3CPU.py and sets the default L1 cache mshr targets to 20. --HG-- extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
2011-12-01ARM: Add support for having a TLB cache.Ali Saidi
--HG-- extra : rebase_source : 7a5780ab74d7c294682738c7ccb3ce8d56c6fd63
2011-12-01O3: Add stat that counts how many cycles the O3 cpu was quiesced.Ali Saidi
--HG-- extra : rebase_source : 043b9307eef3c5b87f8e6370765641e016ed1fa7
2011-11-03Ruby: Remove some unused typedefsNilay Vaish
This patch removes some of the unused typedefs. It also moves some of the typedefs from Global.hh to TypeDefines.hh. The patch also eliminates the file NodeID.hh.
2011-10-31GCC: Get everything working with gcc 4.6.1.Gabe Black
And by "everything" I mean all the quick regressions.
2011-09-27O3: Tidy up some DPRINTFs in the LSQ.Gabe Black
2011-09-27Faults: Replace calls to genMachineCheckFault with M5PanicFault.Gabe Black
2011-09-26LSQ: Moved a couple of lines to enable O3 + RubyNilay Vaish
This patch makes O3 CPU work along with the Ruby memory model. Ruby overwrites the senderState pointer with another pointer. The pointer is restored only when Ruby gets done with the packet. LSQ makes use of senderState just after sendTiming() returns. But the dynamic_cast returns a NULL pointer since Ruby's senderState pointer is from a different class. Storing the senderState pointer before calling sendTiming() does away with the problem.
2011-09-22event: minor cleanupSteve Reinhardt
Initialize flags via the Event constructor instead of calling setFlags() in the body of the derived class's constructor. I forget exactly why, but this made life easier when implementing multi-queue support. Also rename Event::getFlags() to isFlagSet() to better match common usage, and get rid of some unused Event methods.
2011-09-19Syscall: Make the syscall function available in both SE and FS modes.Gabe Black
In FS mode the syscall function will panic, but the interface will be consistent and code which calls syscall can be compiled in. This will allow, for instance, instructions that use syscall to be built unconditionally but then not returned by the decoder.
2011-09-13LSQ: Only trigger a memory violation with a load/load if the value changes.Ali Saidi
Only create a memory ordering violation when the value could have changed between two subsequent loads, instead of just when loads go out-of-order to the same address. While not very common in the case of Alpha, with an architecture with a hardware table walker this can happen reasonably frequently beacuse a translation will miss and start a table walk and before the CPU re-schedules the faulting instruction another one will pass it to the same address (or cache block depending on the dendency checking). This patch has been tested with a couple of self-checking hand crafted programs to stress ordering between two cores. The performance improvement on SPEC benchmarks can be substantial (2-10%).
2011-09-09StaticInst: Merge StaticInst and StaticInstBase.Gabe Black
Having two StaticInst classes, one nominally ISA dependent and the other ISA dependent, has not been historically useful and makes the StaticInst class more complicated that it needs to be. This change merges StaticInstBase into StaticInst.
2011-09-09Decode: Pull instruction decoding out of the StaticInst class into its own.Gabe Black
This change pulls the instruction decoding machinery (including caches) out of the StaticInst class and puts it into its own class. This has a few intrinsic benefits. First, the StaticInst code, which has gotten to be quite large, gets simpler. Second, the code that handles decode caching is now separated out into its own component and can be looked at in isolation, making it easier to understand. I took the opportunity to restructure the code a bit which will hopefully also help. Beyond that, this change also lays some ground work for each ISA to have its own, potentially stateful decode object. We'd be able to include less contextualizing information in the ExtMachInst objects since that context would be applied at the decoder. Also, the decoder could "know" ahead of time that all the instructions it's going to see are going to be, for instance, 64 bit mode, and it will have one less thing to check when it decodes them. Because the decode caching mechanism has been separated out, it's now possible to have multiple caches which correspond to different types of decoding context. Having one cache for each element of the cross product of different configurations may become prohibitive, so it may be desirable to clear out the cache when relatively static state changes and not to have one for each setting. Because the decode function is no longer universally accessible as a static member of the StaticInst class, a new function was added to the ThreadContexts that returns the applicable decode object.
2011-08-19LSQ: Set store predictor to periodically clear itself as recommended in the ↵Ali Saidi
storesets paper. This patch improves performance by as much as 10% on some spec benchmarks.
2011-08-19Fix bugs due to interaction between SEV instructions and O3 pipelineGeoffrey Blake
SEV instructions were originally implemented to cause asynchronous squashes via the generateTCSquash() function in the O3 pipeline when updating the SEV_MAILBOX miscReg. This caused race conditions between CPUs in an MP system that would lead to a pipeline either going inactive indefinitely or not being able to commit squashed instructions. Fixed SEV instructions to behave like interrupts and cause synchronous sqaushes inside the pipeline, eliminating the race conditions. Also fixed up the semantics of the WFE instruction to behave as documented in the ARMv7 ISA description to not sleep if SEV_MAILBOX=1 or unmasked interrupts are pending.
2011-08-19LSQ: Add some better dprintfs for storeset predictor.Mrinmoy Ghosh
2011-08-19LSQ: Fix a few issues with the storeset predictor.Mrinmoy Ghosh
Two issues are fixed in this patch: 1. The load and store pc passed to the predictor are passed in reverse order. 2. The flag indicating that a barrier is inflight was never cleared when the barrier was squashed instead of committed. This made all load insts dependent on a non-existent barrier in-flight.
2011-08-19O3: Squash the violator and younger instructions instead not all insts.Giacomo Gabrielli
Change the way instructions are squashed on memory ordering violations to squash the violator and younger instructions, not all instructions that are younger than the instruction they violated (no reason to throw away valid work).
2011-08-16InOrder: Make cache_unit.hh include hashmap.hh explicitly, not transitively.Gabe Black
2011-08-16O3: Make lsq_unit.hh include arch/isa_traits.hh directly, not transitively.Gabe Black
2011-08-14O3: When squashing, restore the macroop that should be used for fetching.Gabe Black
2011-08-14O3: Add a pointer to the macroop for a microop in the dyninst.Gabe Black
2011-08-13O3: At the end of an instruction, force fetchAddr to something sensible.Gabe Black
It's possible (though until now very unlikely) for fetchAddr to get out of sync with the actual PC of the current instruction. This change forcefull resets fetchAddr at the end of every instruction.
2011-08-09O3: Stop using the current macroop no matter why you're leaving it.Gabe Black
Until now, the only reason a macroop would be left was because it ended at a microop marked as the last microop. In O3 with branch prediction, it's possible for the branch predictor to have entries which originally came from different instructions which happened to have the same RIP. This could theoretically happen in many ways, but it was encountered specifically when different programs in different address spaces ran one after the other in X86_FS. What would happen in that case was that the macroop would continue to be looped over and microops fetched from it until it reached the last microop even though the macropc had moved out from under it. If things lined up properly, this could mean that the end bytes of an instruction actually fell into the instruction sized block of memory after the one in the predecoder. The fetch loop implicitly assumes that the last instruction sized chunk of memory processed was the last one needed for the instruction it just finished executing. It would then tell the predecoder to move to an offset within the bytes it was given that is larger than those bytes, and that would trip an assert in the x86 predecoder. This change fixes this problem by making fetch stop processing the current macroop if the address it should be fetching from changed when the PC is updated. That happens when the last microop was reached because the instruction handled it properly, and it also catches the case where the branch predictor makes fetch do a macro level branch when it shouldn't. The check of isLastMicroop is retained because otherwise, a macroop that branches back to itself would act like a single, long macroop instead of multiple instances of the same microop. There may be situations (which may turn out to be purely hypothetical) where that matters. This also fixes a relatively minor issue where the curMacroop variable would be set to NULL immediately after seeing that a microop was the last one before curMacroop was used to build the dyninst. The traceData structure would have a NULL pointer to the macroop for that microop.
2011-08-09O3: When waiting to handle an interrupt, let everything drain out.Gabe Black
Before this change, the commit stage would wait until the ROB and store queue were empty before recognizing an interrupt. The fetch stage would stop generating instructions at an appropriate point, so commit would then wait until a valid time to interrupt the instruction stream. Instructions might be in flight after fetch but not the in the ROB or store queue (in rename, for instance), so this change makes commit wait until all in flight instructions are finished.
2011-08-08BuildEnv: Eliminate RUBY as build environment variableNilay Vaish
This patch replaces RUBY with PROTOCOL in all the SConscript files as the environment variable that decides whether or not certain components of the simulator are compiled.
2011-08-07O3: Get rid of the unused addToRemoveList function.Gabe Black
2011-08-07O3: Let squashed and deferred instructions issue.Gabe Black
Let squahsed and deferred instructions issue so they don't accumulate and clog up the CPU.
2011-08-07O3: Fix uninitialized variable in the tournament branch predictor.Ali Saidi
2011-08-07Translation: Use a pointer type as the template argument.Gabe Black
This allows regular pointers and reference counted pointers without having to use any shim structures or other tricks.
2011-08-02O3: Get rid of the raw ExtMachInst constructor on DynInsts.Gabe Black
This constructor assumes that the ExtMachInst can be decoded directly into a StaticInst that's useful to execute. With the advent of microcoded instructions that's no longer true.
2011-07-31O3: Implement memory mapped IPRs for O3.Gabe Black
2011-07-30O3: Fix corner case squashing into the microcode ROM.Gabe Black
When fetching from the microcode ROM, if the PC is set so that it isn't in the cache block that's been fetched the CPU will get stuck. The fetch stage notices that it's in the ROM so it doesn't try to fetch from the current PC. It then later notices that it's outside of the current cache block so it skips generating instructions expecting to continue once the right bytes have been fetched. This change lets the fetch stage attempt to generate instructions, and only checks if the bytes it's going to use are valid if it's really going to use them.
2011-07-15O3: Create a pipeline activity viewer for the O3 CPU model.Giacomo Gabrielli
Implemented a pipeline activity viewer as a python script (util/o3-pipeview.py) and modified O3 code base to support an extra trace flag (O3PipeView) for generating traces to be used as inputs by the tool.
2011-07-10Branch predictor: Fixes the tournament branch predictor.Mrinmoy Ghosh
Branch predictor could not predict a branch in a nested loop because: 1. The global history was not updated after a mispredict squash. 2. The global history was updated in the fetch stage. The choice predictors that were updated used the changed global history. This is incorrect, as it incorporates the state of global history after the branch in encountered. Fixed update to choice predictor using the global history state before the branch happened. 3. The global predictor table was also updated using the global history state before the branch happened as above. Additionally, parameters to initialize ctr and history size were reversed.
2011-07-10O3: Fix up pipelining icache accesses in fetch stage to function properlyGeoffrey Blake
Fixed up the patch from Yasuko Watanabe that enabled pipelining of fetch accessess to icache to work with recent changes to main repository. Also added in ability for fetch stage to delay issuing the fault carrying nop when a pipeline fetch causes a fault and no fetch bandwidth is available until the next cycle.
2011-07-10O3: Make sure fetch doesn't go off into the weeds during speculation.Ali Saidi
2011-07-02ExecContext: Rename the readBytes/writeBytes functions to readMem and writeMem.Gabe Black
readBytes and writeBytes had the word "bytes" in their names because they accessed blobs of bytes. This distinguished them from the read and write functions which handled higher level data types. Because those functions don't exist any more, this change renames readBytes and writeBytes to more general names, readMem and writeMem, which reflect the fact that they are how you read and write memory. This also makes their names more consistent with the register reading/writing functions, although those are still read and set for some reason.
2011-07-02ExecContext: Get rid of the now unused read/write templated functions.Gabe Black
2011-06-30Ruby: Add support for functional accessesBrad Beckmann ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
This patch rpovides functional access support in Ruby. Currently only the M5Port of RubyPort supports functional accesses. The support for functional through the PioPort will be added as a separate patch.
2011-06-20InOder: Fix a compile error.Gabe Black