| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I6d8a5e3795291b2a4cce022f555cf4b04f997538
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3262
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Add support for automatic PCI interrupt routing using a device's ID on
the PCI bus. Our current DTBs typically tell the kernel that we do
this or something similar when declaring the PCI controller. This
changeset adds an option to make the simulator behave in the same way.
Interrupt routing can be selected by setting the int_policy parameter
in the GenericArmPciHost. The following values are supported:
* ARM_PCI_INT_STATIC: Use the old static routing policy using the
interrupt line from a device's configurtion space.
* ARM_PCI_INT_DEV: Use device number on the PCI bus to map to an
interrupt in the GIC. The interrupt is computed as:
gic_int = int_base + (pci_dev % int_count)
* ARM_PCI_INT_PIN: Use device interrupt pin on the PCI bus to map to
an interrupt in the GIC. The PCI specification reserves pin ID 0
for devices without interrupts, the interrupt therefore computed
as:
gic_int = int_base + ((pin - 1) % int_count)
|
|
Add a simple device shim that interfaces with the NoMali model
library. The gem5 side of the interface supports Mali T60x/T62x/T760
GPUs. This device model pretends to be a Mali GPU, but doesn't render
anything and executes in zero time.
|
|
This patch introduces a UFS host controller and a UFS device. More
information about the UFS standard can be found at the JEDEC site:
http://www.jedec.org/standards-documents/results/jesd220
Note that the model does not implement the complete standard, and as
such is not an actual implementation of UFS. The following SCSI
commands are implemented: inquiry, read, read capacity, report LUNs,
start/stop, test unit ready, verify, write, format unit, send
diagnostic, synchronize cache, mode select, mode sense, request sense,
unmap, write buffer and read buffer. This is sufficient for usage with
Linux and Android.
To interact with this model a kernel version 3.9 or above is
needed.
|
|
This adds a NAND flash timing model. This model takes the number of
planes into account and is ultimately intended to be used as a
high-level performance model for any device using flash. To access the
memory, use either readMemory or writeMemory.
To make use of the model you will need an interface model
such as UFSHostDevice, which is part of a separate patch.
At the moment the flash device is part of the ARM device tree since
the only use if the UFSHostDevice, and that in turn relies on the ARM
GIC.
|
|
This patch adds a new PIO-accessible GICv2m shim. This shim has a PIO
slave port on one side, and SPI 'wires' on the other. It accepts MSIs
from the system and triggers SPIs on the GIC. It is configurable with
a number of frames, each of which has a number of SPIs and a base SPI
offset.
A Linux driver for GICv2m is available upstream.
|
|
This patch provides an Energy Controller device that provides software
(driver) access to a DVFS handler. The device is currently residing in
the dev/arm tree, but there is nothing inherently ARM specific in the
behaviour. It is currently only tested and supported for ARM Linux,
hence the location.
|
|
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.
Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.
Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
|
|
The VE motherboard provides a set of system control registers through which
various motherboard and coretile registers are accessed. Voltage regulators and
oscillator (DLL/PLL) config are examples. These registers must be impleted to
boot Linux 3.9+ kernels.
|
|
Newer core tiles / daughterboards for the Versatile Express platform have an
HDLCD controller that supports HD-quality output. This patch adds an
implementation of the controller.
|
|
This patch moves the GIC interface to a separate base class and makes
all interrupt devices use that base class instead of a pointer to the
PL390 implementation. This allows us to have multiple GIC
implementations. Future implementations will allow in-kernel GIC
implementations when using hardware virtualization.
--HG--
rename : src/dev/arm/gic.cc => src/dev/arm/gic_pl390.cc
rename : src/dev/arm/gic.hh => src/dev/arm/gic_pl390.hh
|
|
This change implements a PL031 real time clock.
--HG--
rename : src/dev/arm/timer_sp804.cc => src/dev/arm/rtc_pl031.cc
rename : src/dev/arm/timer_sp804.hh => src/dev/arm/rtc_pl031.hh
|
|
|
|
Cortex-A9 processors can have a local timer and watchdog counter. It
is enabled by default in Linux and up to this point we've had to disable
them since a model wasn't available. This change allows a default
MP ARM Linux configuration to boot.
|
|
|
|
|
|
|
|
|
|
The GIC code can write to the registers with 8, 16, or 32 byte
accesses which could set/clear different numbers of interrupts.
|
|
--HG--
rename : src/dev/arm/Versatile.py => src/dev/arm/RealView.py
rename : src/dev/arm/versatile.cc => src/dev/arm/realview.cc
rename : src/dev/arm/versatile.hh => src/dev/arm/realview.hh
|
|
|
|
--HG--
rename : src/arch/sparc/interrupts.hh => src/arch/arm/interrupts.hh
rename : src/arch/sparc/kernel_stats.hh => src/arch/arm/kernel_stats.hh
rename : src/arch/sparc/stacktrace.cc => src/arch/arm/stacktrace.cc
rename : src/arch/sparc/system.cc => src/arch/arm/system.cc
rename : src/arch/sparc/system.hh => src/arch/arm/system.hh
rename : src/dev/sparc/T1000.py => src/dev/arm/Versatile.py
rename : src/dev/sparc/t1000.cc => src/dev/arm/versatile.cc
rename : src/dev/sparc/t1000.hh => src/dev/arm/versatile.hh
|
