summaryrefslogtreecommitdiff
path: root/src/dev/arm
AgeCommit message (Collapse)Author
2019-04-25dev-arm: Limit number of max PE in GICv3 to 128Giacomo Travaglini
This is needed since there is a problem in the memory layout of VExpress_GEM5_V2 as it is: having 256KB pages is creating overlapping regions when reserving space for 256 PEs. GICv3 redistributors: 0x2c010000 - 0x30010000 PCI regions: 0x30000000 - 0x40000000 We fix this by cutting down the number of supported PEs to 128 Change-Id: I6e87f66a6150a441ccba298662b4548a4972dc40 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18392 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-04-25dev-arm: Add GICv4 extension switch in GICv3Giacomo Travaglini
This is currently used only for determining which is the correct size of redistributors in memory (256KB in GICv4 and 128KB in GICv3) Change-Id: I2c07005e97167fde03548313c9927176788f31dd Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18391 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-04-25dev-arm: Check for maximum number of supported PE in GICv3Giacomo Travaglini
This is currently set to 256 Change-Id: If7bb2847c22f29bfa0cb4ebf4a7984ee43ab4e29 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18390 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-04-02dev-arm: Make GICv3 maintenance interrupt an ArmInterruptGiacomo Travaglini
Change-Id: I88e2b72849cdf3f69026c62517303837e7d3d551 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17629 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-27dev-arm: Rename GIC maintenance interrupt from ppint to maint_intGiacomo Travaglini
ppint is a generic name which only reflects Arm recommendation of assigning the maintanance interrupt to a PPI (numbered 25) Change-Id: Ic5abb6ed50817ad2d165b5df46dd989eb195a9db Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17628 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-27dev-arm: Fix GICv3 overflow for INTID > 256Giacomo Travaglini
SPIs can get to a maximum number of 1023, so that an uint8_t is not capable of representing all of them. Change-Id: I7a2c43b41ac93eabdfcf8311681240416b954177 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17631 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-27dev-arm: Writing ICENABLER for non-SPIs is RAZ/WI (or RES0)Giacomo Travaglini
For SGIs and PPIs: * When ARE is 1 (only value supported in gem5) for the Security state of an interrupt, the field for that interrupt is RES0 and an implementation is permitted to make the field RAZ/WI in this case. Change-Id: I6da2a89b1c848d458f42540e0113e7139b910abb Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17630 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-26dev-arm: Set/Unset dma coherent mode from pythonGiacomo Travaglini
With this patch it will be possible to automatically enable/disable the dma-coherent property for the GenericArmPciHost autogenerated DTB. This has been done by adding the _dma_coherent param. Change-Id: I1759fced74e42410462637ca77997a351314a90a Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16748 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-14dev-arm: cleanup of gicv3 CPU interface code and fixesJairo Balart
Change-Id: I4643140f60da4dc9179b5bfed1e3ddd7c2f23091 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16484 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-03-12dev-arm: cleanup of gicv3 codeJairo Balart
Change-Id: I9aba90022f6408838c4ab87c6b90bba438752e53 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/16222 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-03-01dev-arm: Set ICV_PMR_EL1-ICH_VMCR_EL2 mapping on readsGiacomo Travaglini
Reading ICV_PMR_EL1 should return the value the VMCR_EL2.VPMR bits which are aliased to the register. Change-Id: Id3e6dfb196f3726edaa3eddb244765598ed62334 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/16545 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-03-01dev-arm: Set ICV_IGRPEN<n>_EL1-ICH_VMCR_EL2 mapping on readsGiacomo Travaglini
Reading ICV_IGRPEN<n>_EL1 should return the value of VMCR_EL2.VENG0 and VMCR_EL2.VENG1 bits. Change-Id: Ia5d748cf60ba074cccf4c127ac479c5cb881773d Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/16544 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-02-18dev-arm: LPI support for GICv3. This doesn't include an ITS model.Jairo Balart
Change-Id: Ia2c02cca4f95672d6361fba16201a56e2047ddb7 Reviewed-on: https://gem5-review.googlesource.com/c/16142 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-02-12python: Don't assume SimObjects live in the global namespaceAndreas Sandberg
The importer in Python 3 doesn't like the way we import SimObjects from the global namespace. Convert the existing SimObject declarations to import from m5.objects. As a side-effect, this makes these files consistent with configuration files. Change-Id: I11153502b430822130722839e1fa767b82a027aa Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15981 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-02-07configs, arch-arm: Using AddrRange for Realview mem_regionsGiacomo Travaglini
Physical memory ranges are now saved in Realview objects as pairs of addresses (start address and size). This patch is substituting them with a single AddrRange object. Change-Id: I02d25d557c5c54d062f0dccef8ede45744d0ce6b Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/16206 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-02-01dev, arm: Removed contextId variableAnouk Van Laer
The contextId variable is only used by the debug flag and will prevent a more optimised binary (i.e. fast) from compiling. Change-Id: I6cefb5bc06d0d4b415df62f1278db53ba309fb87 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/16042 Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-01-24dev-arm: fix --generate-dtb for ARMCiro Santilli
Was failing with: NameError: global name 'FdtNode' is not defined The problem was introduced at: 75831ce5b7880b67c1aa2e0871ce16d5c01cadc7 Change-Id: I7e2ce0e5311e7814229945b9f4e7318a8652dc1f Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15875 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-22arm: dev: Replace ArmISA::MiscReg with RegVal in the GIC v3 model.Gabe Black
Other dev code was already switched over. This code was written before the switch over (or unaware of it), and checked in after. Change-Id: Ibb9e9e4300d01cc46e4dae668274debc2a4989ba Reviewed-on: https://gem5-review.googlesource.com/c/15755 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-16cpu: dev: sim: gpu-compute: Banish some ISA specific register types.Gabe Black
These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are some remaining types, specifically the vector registers and the CCReg. I'm less familiar with these new types of registers, and so will look at getting rid of them at some later time. Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b Reviewed-on: https://gem5-review.googlesource.com/c/13624 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com>
2019-01-10dev-arm: Add a VExpress_GEM5_V2 platform with GICv3 supportJairo Balart
Change-Id: I6fd14138d94654e8e60cde08239ea9a50fc19eb7 Reviewed-on: https://gem5-review.googlesource.com/c/14255 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-01-10dev-arm: Add a GICv3 modelJairo Balart
Change-Id: Ib0067fc743f84ff7be9f12d2fc33ddf63736bdd1 Reviewed-on: https://gem5-review.googlesource.com/c/13436 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-01-04dev, arm: Warn on PL011 DMA disableJan-Peter Larsson
The PL011 spec specifies a DMACR register at offset 0x48, which isn't implemented in the model. Currently any attempt to access the register results in a panic. This change swaps the panic for a warning only when software writes into DMACR to disable DMA, keeping the panic otherwise. Change-Id: I04586b52df8d5d174536276fd7ae19e77ff4681a Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15279 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-04dev-arm: Added VGIC GICV_IIDR responseAnouk Van Laer
Change-Id: I60e8eadbbbf07c0f8b726213fd580aeb0dd0e00b Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15278 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-04dev-arm: Implement GIC-400 model from GicV2Giacomo Travaglini
Implementation registers for the GICv2 model currently hold values referring to a GIC-400 implementation. This patch is making them parametrizable so that it is possible to instantiate a GIC-400 model. The patch is also modifying Realview platform to use new GIC-400 model in lieau of GICv2. Change-Id: I446db8c796ee3c2708af91e9139f0a6e7947321b Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15277 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-04dev-arm: Move VGic from Realview.py to Gic.pyGiacomo Travaglini
Change-Id: I17f2fb6be2435d4601263e7f68a0582e0cc70838 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15276 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-01-04dev-arm: Added unimplemented GICv2 GICC_DIRAnouk Van Laer
This GICC CPU register is not implemented but just gives a warning. Change-Id: I7630aa1df78dde5cf84a87e26cd580b00b283673 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/15275 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-17dev-arm: Don't panic when EOIR a non active PPIAdrien Pesle
GIC architecture specification says that writing EOIR with a not active irq it is an unpredictable behavior. So, just warn when it happens for a PPI case, like it is already done in SPI case. Change-Id: Icb1b8f5690d5e87b15c3b0fe2ca0d37fdd4085ee Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/13556 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-17dev-arm: Fix Gicv2 distributor group registerAdrien Pesle
For each bit in GICD_IGROUPR: value 0 means corresponding irq is group0 value 1 means corresponding irq is group 1. Change-Id: I15699d4bc89ff3df0e0bdb41154c0d0989dc2f63 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/13555 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-12arm: Use little endian packet accessors.Gabe Black
We know data is little endian, so we can use those accessors explicitly. Change-Id: Iee337109fcda134e1ac5a700e5141fd7060f9c45 Reviewed-on: https://gem5-review.googlesource.com/c/13457 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-08dev, arm: remove the RealViewEB platformCiro Santilli
This is an old platform, and we haven't had official Linux kernel configs for it in a while, so we've decided to deprecate it. Furthermore, trying to use it fails with: object 'RealViewEB' has no attribute 'pci_host' and the last commit in the class happened two years ago, which indicates that no one has been using it. Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/12471 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Enable FIQ signaling for Group0 interrupts in GICv2Giacomo Travaglini
Change-Id: Iafaf26344a26eade60c08dd2c0d716af14d9b328 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12948 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Create postFiq events for GICv2Giacomo Travaglini
GICv2 is signaling IRQs only to the CPU. This patch is adding the capability of scheduling FIQs. Change-Id: I395afc83eb8d58cfd32cd93372bcb6f804364ef5 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12947 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Implement GICv2 GICD_IGROUPR registerGiacomo Travaglini
This patch is implementing GICD_IGROUPR register. Change-Id: I1626f61fbf7deec9c81d8d2c135f1d6c0c4eb891 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12946 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Fix GICv2 cpu interrupt enable flagGiacomo Travaglini
Read/WriteCpu methods in the GICv2 are accessing the GICC_CTRL register as if writing any non-zero value to the register will enable IRQ signaling to the CPU. Instead, only the 2 least significant bits control group0/group1 enablement. This patch is renaming GICC_CTRL underlying data buffer from cpuEnabled to cpuControl and it is making it an array of uint32_t instead of bool. cpuEnabled now becomes a method and checks if GICC_CTRL.EnableGrp0 or GICC_CTRL.EnableGrp0 are set. Change-Id: I40f0b3c52c40abd482a856f032bf3686f96ef641 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12945 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-10-01dev-arm: Add basic support for level sensitive SPIs in GICv2Adrien Pesle
For level sensitive interrupt IRQ line must be cleared when interrupt is deasserted. This is not the case for edge-trigerred interrupt. Change-Id: Ib1660da74a296750c0eb9e20878d4ee64bd23130 Reviewed-on: https://gem5-review.googlesource.com/12944 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-28dev-arm: Make CpuLocalTimer use standard ArmInterruptPinGiacomo Travaglini
Change-Id: I8c4eb9389b47df8cdf1eec966bb2c9da85a7a7c8 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12744 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-28dev-arm: Take into account PPI enable bitGiacomo Travaglini
When checking for PPIs to send to the cpu in the PL390 GIC we were forwarding any pending PPI regardless of their masking in the distributor. Change-Id: I2e294abeca733cca95cd0deeb9659c7d3d9d8734 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12624 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-18dev, arm: fix error class-memaccess with GCC >= 8.1Maurice Becker
From GCC 8.1 on GCC issues a warning when using memset et al on structs and classes. With the way gem5 builds, this actually prevents successful builds. Instead of using a pointer with SCSIReply as type, we cast to a void pointer to avoid the message. On the way we wrap the memset call into a method of SCSIReply called reset for better code readability. Signed-off-by: Maurice Becker <madnaurice@googlemail.com> Change-Id: I3ed3fd9714be5d253aba01ca00b1863e1ae5cb68 Reviewed-on: https://gem5-review.googlesource.com/12685 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2018-09-18Pl011: Added registers UART_RSR/UART_ECRMaurice Becker
UART_RSR shows errors with the transmission and UART_ECR can clear those (according to PL011 Technical Reference Manual Revision r1p4). As these transmission errors never occur, they are implemented as RAZ/WI. Both registers exist at the same offset 0x004. RSR is read-only, ECR is write-only. Signed-off-by: Maurice Becker <madnaurice@googlemail.com> Change-Id: Ia9d13c90c65feccf3ecec36a782170755b1e1c02 Reviewed-on: https://gem5-review.googlesource.com/12686 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-12dev-arm: fix build to missing Pl390 to Gicv2 renameCiro Santilli
Change-Id: I6756f2c789aaca410d201aa64147443b66afee39 Reviewed-on: https://gem5-review.googlesource.com/12645 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-12config, dev-arm: Fix UART handling baremetal modeCiro Santilli
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform due to inconsistent UART naming with error message: AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart' Consistently name keep all UARTs in the Arm platforms in a vector named 'uart' or as a single device named 'uart'. Update the configuration scripts to reflect the fact that 'uart' can be a vector. Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12473 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-12dev-arm: rename Pl390 to GicV2Ciro Santilli
The Pl390 model has evolved and acquired a lot of the features from GICv2, which means that the name is no longer appropriate. Rename it to GICv2 since this is more representative of the supported features. GICv2 is backwards compatible with the older Pl390, so we decided to simply rename the class to represent both GICv2 and older interfaces such as the instead of creating a new separate one. Change-Id: I1c05fba8b3cb5841c66480e9f05b8c873eba3229 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12492 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-12dev-arm: improve Pl390 parametersCiro Santilli
Remove default dist_addr and cpu_addr register addresses since those are purely platform specific. Parametrize the cpu_size parameter. RealViewPBX has the Gic CPU and distributor base too close for the newer CPU size of 0x2000, leading to overlap. This was introduced in I90a9f669a46a37d79c6cc542087cf91f2044f104 and makes using RealViewPBX fail with: fatal: system.membus has two ports responding within range [0x1f000100 : 0x1f0020ff]: system.realview.gic.pio system.realview.gic.pio Change-Id: Ic6c0e6b3d4705ff369eb739d54a1173a47819b7d Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12491 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-10dev-arm: Make GenericTimer use standard ArmInterruptPinGiacomo Travaglini
This patch is deleting the custom ArchTimer::Interrupt implementation in favour of the standard ArmInterruptPin. Change-Id: I5aa5661e48834398bd7aae15df9578b8db5c8da3 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12402 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-10dev-arm: Factory SimObject for generating ArmInterruptPinGiacomo Travaglini
With this patch the python ArmInterruptPin SimObject matches to the C++ ArmInterruptPinGen. The latter is in charge of generating the ArmInterruptPin (which is not a SimObject anymore). This is meant to ease the generation of ArmInterruptPins: by not being SimObjects we are not forced to instantiate them in the configuration script; we can generate them dynamically instead throughout simulation. Change-Id: I917d73a26168447221f5993c8ae975ee3771e3bf Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12401 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-09-10dev, arm: Add misc reg tracing to the generic timerAndreas Sandberg
Change-Id: Ice9376b8eb42423679b0191910e8c980f8017f88 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12398
2018-09-10dev-arm: Create a getter for ArmInterruptPin ID numberGiacomo Travaglini
A pin owner might want to know which is the irq number associated with the pin. Change-Id: I095393d4d25efe13eb2a75a0b0b055d386c2c126 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/12298 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-08-21dev, arm: Fix incorrect GIC address range sizesAndreas Sandberg
The GICv2 specifies that 8KiB of the memory map is allocated to the CPU interface and 4KiB is allocated to the distributor. The current distributor size is off by 1 and the CPU interface is completely off by a lot. Change-Id: I90a9f669a46a37d79c6cc542087cf91f2044f104 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-on: https://gem5-review.googlesource.com/11769
2018-07-17dev, arm: accept and ignore writes to GIC APRn registersCiro Santilli
Otherwise the Linux kernel v4.17 boot fails with error: Tried to write Gic cpu at offset 0xd0 Change-Id: Ie8063212c9e2b29e2e4766801b4b9538e9eccbf8 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/11590 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2018-06-21dev-arm: Use recurseDeviceTree instead of custom in platformAndreas Sandberg
The platform code uses a custom mechanism to traverse the object hierarchy when generating device trees. This is highly undesirable since this breaks for common cases such as when SimObjects are stored in a list. Change-Id: I1b968e5fa1db62f1456e3c0ac3de47ab1299e58d Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/10781 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-26 21:02:03 +0000