summaryrefslogtreecommitdiff
path: root/src/dev/dma_device.hh
AgeCommit message (Collapse)Author
2015-10-12misc: Add explicit overrides and fix other clang >= 3.5 issuesAndreas Hansson
This patch adds explicit overrides as this is now required when using "-Wall" with clang >= 3.5, the latter now part of the most recent XCode. The patch consequently removes "virtual" for those methods where "override" is added. The latter should be enough of an indication. As part of this patch, a few minor issues that clang >= 3.5 complains about are also resolved (unused methods and variables).
2015-10-12misc: Remove redundant compiler-specific definesAndreas Hansson
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap (and similar) abstractions, as these are no longer needed with gcc 4.7 and clang 3.1 as minimum compiler versions.
2015-08-07dev: Add a simple DMA engine that can be used by devicesAndreas Sandberg
Add a simple DMA engine that sits behind a FIFO. This engine can be used by devices that need to read large amounts of data (e.g., display controllers). Most aspects of the controller, such as FIFO size, maximum number of in-flight accesses, and maximum request sizes can be configured. The DMA copies blocks of data into its FIFO. Transfers are initiated with a call to startFill() command that takes a start address and a size. Advanced users can create a derived class that overrides the onEndOfBlock() callback that is triggered when the last request to a block has been issued. At this point, the DMA engine is ready to start fetching a new block of data, potentially from a different address range. The DMA engine stops issuing new requests while it is draining. Care must be taken to ensure that devices that are fed by a DMA engine are suspended while the system is draining to avoid buffer underruns.
2015-07-07sim: Refactor and simplify the drain APIAndreas Sandberg
The drain() call currently passes around a DrainManager pointer, which is now completely pointless since there is only ever one global DrainManager in the system. It also contains vestiges from the time when SimObjects had to keep track of their child objects that needed draining. This changeset moves all of the DrainState handling to the Drainable base class and changes the drain() and drainResume() calls to reflect this. Particularly, the drain() call has been updated to take no parameters (the DrainManager argument isn't needed) and return a DrainState instead of an unsigned integer (there is no point returning anything other than 0 or 1 any more). Drainable objects should return either DrainState::Draining (equivalent to returning 1 in the old system) if they need more time to drain or DrainState::Drained (equivalent to returning 0 in the old system) if they are already in a consistent state. Returning DrainState::Running is considered an error. Drain done signalling is now done through the signalDrainDone() method in the Drainable class instead of using the DrainManager directly. The new call checks if the state of the object is DrainState::Draining before notifying the drain manager. This means that it is safe to call signalDrainDone() without first checking if the simulator has requested draining. The intention here is to reduce the code needed to implement draining in simple objects.
2015-07-07sim: Decouple draining from the SimObject hierarchyAndreas Sandberg
Draining is currently done by traversing the SimObject graph and calling drain()/drainResume() on the SimObjects. This is not ideal when non-SimObjects (e.g., ports) need draining since this means that SimObjects owning those objects need to be aware of this. This changeset moves the responsibility for finding objects that need draining from SimObjects and the Python-side of the simulator to the DrainManager. The DrainManager now maintains a set of all objects that need draining. To reduce the overhead in classes owning non-SimObjects that need draining, objects inheriting from Drainable now automatically register with the DrainManager. If such an object is destroyed, it is automatically unregistered. This means that drain() and drainResume() should never be called directly on a Drainable object. While implementing the new functionality, the DrainManager has now been made thread safe. In practice, this means that it takes a lock whenever it manipulates the set of Drainable objects since SimObjects in different threads may create Drainable objects dynamically. Similarly, the drain counter is now an atomic_uint, which ensures that it is manipulated correctly when objects signal that they are done draining. A nice side effect of these changes is that it makes the drain state changes stricter, which the simulation scripts can exploit to avoid redundant drains.
2015-03-02mem: Split port retry for all different packet classesAndreas Hansson
This patch fixes a long-standing isue with the port flow control. Before this patch the retry mechanism was shared between all different packet classes. As a result, a snoop response could get stuck behind a request waiting for a retry, even if the send/recv functions were split. This caused message-dependent deadlocks in stress-test scenarios. The patch splits the retry into one per packet (message) class. Thus, sendTimingReq has a corresponding recvReqRetry, sendTimingResp has recvRespRetry etc. Most of the changes to the code involve simply clarifying what type of request a specific object was accepting. The biggest change in functionality is in the cache downstream packet queue, facing the memory. This queue was shared by requests and snoop responses, and it is now split into two queues, each with their own flow control, but the same physical MasterPort. These changes fixes the previously seen deadlocks.
2014-12-23arm: Add stats to table walkerCurtis Dunham
This patch adds table walker stats for: - Walk events - Instruction vs Data - Page size histogram - Wait time and service time histograms - Pending requests histogram (per cycle) - measures dist. of L (p(1..) = how often busy, p(0) = how often idle) - Squashes, before starting and after completion
2013-07-18mem: Set the cache line size on a system levelAndreas Hansson
This patch removes the notion of a peer block size and instead sets the cache line size on the system level. Previously the size was set per cache, and communicated through the interconnect. There were plenty checks to ensure that everyone had the same size specified, and these checks are now removed. Another benefit that is not yet harnessed is that the cache line size is now known at construction time, rather than after the port binding. Hence, the block size can be locally stored and does not have to be queried every time it is used. A follow-on patch updates the configuration scripts accordingly.
2012-11-02sim: Move the draining interface into a separate base classAndreas Sandberg
This patch moves the draining interface from SimObject to a separate class that can be used by any object needing draining. However, objects not visible to the Python code (i.e., objects not deriving from SimObject) still depend on their parents informing them when to drain. This patch also gets rid of the CountedDrainEvent (which isn't really an event) and replaces it with a DrainManager.
2012-10-23dev: Remove zero-time loop in DMA timing sendAndreas Hansson
This patch removes the zero-time loop used to send items from the DMA port transmit list. Instead of having a loop, the DMA port now uses an event to schedule sending of a single packet. Ultimately this patch serves to ease the transition to a blocking 4-phase handshake. A follow-on patch will update the regression statistics.
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-08-22DMA: Refactor the DMA device and align timing and atomicAndreas Hansson
This patch does a bunch of house-keeping updates on the DMA, including indentation, and formatting, but most importantly breaks out the response handling such that it can be shared between the atomic and timing modes. It also removes a potential bug caused by the atomic handling of responses only deleting the allocated request (pkt->req) once the DMA action completes instead of doing so for every packet. Before this patch, the handling of responses was near identical for atomic and timing, but the code was simply duplicated. With this patch, the handleResp method deals with the responses in both cases. There are further updates to make after removing the NACKs, but that will be part of a separate follow-up patch. This patch does not change the behaviour of any regression.
2012-08-22Packet: Remove NACKs from packet and its use in endpointsAndreas Hansson
This patch removes the NACK frrom the packet as there is no longer any module in the system that issues them (the bridge was the only one and the previous patch removes that). The handling of NACKs was mostly avoided throughout the code base, by using e.g. panic or assert false, but in a few locations the NACKs were actually dealt with (although NACKs never occured in any of the regressions). Most notably, the DMA port will now never receive a NACK and the backoff time is thus never changed. As a consequence, the entire backoff mechanism (similar to a PCI bus) is now removed and the DMA port entirely relies on the bus performing the arbitration and issuing a retry when appropriate. This is more in line with e.g. PCIe. Surprisingly, this patch has no impact on any of the regressions. As mentioned in the patch that removes the NACK from the bridge, a follow-up patch should change the request and response buffer size for at least one regression to also verify that the system behaves as expected when the bridge fills up.
2012-07-27dma: remove unused variableAnthony Gutierrez
this patch removes the actionInProgress field from the DmaPort class. this variable is only defined and initiated in the ctor. it is never used.
2012-06-05sim: Remove FastAllocAli Saidi
While FastAlloc provides a small performance increase (~1.5%) over regular malloc it isn't thread safe. After removing FastAlloc and using tcmalloc I've seen a performance increase of 12% over libc malloc when running twolf for ARM.
2012-05-23DMA: Split the DMA device and IO device into seperate filesAndreas Hansson
This patch moves the DMA device to its own set of files, splitting it from the IO device. There are no behavioural changes associated with this patch. The patch also grabs the opportunity to do some very minor tidying up, including some white space removal and pruning some redundant parameters. Besides the immediate benefits of the separation-of-concerns, this patch also makes upcoming changes more streamlined as it split the devices that are only slaves and the DMA device that also acts as a master. --HG-- rename : src/dev/io_device.cc => src/dev/dma_device.cc rename : src/dev/io_device.hh => src/dev/dma_device.hh