summaryrefslogtreecommitdiff
path: root/src/dev/io_device.cc
AgeCommit message (Collapse)Author
2013-07-11dev: make BasicPioDevice take size in constructorSteve Reinhardt
Instead of relying on derived classes explicitly assigning to the BasicPioDevice pioSize field, require them to pass a size value in to the constructor. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-02-19mem: Enforce strict use of busFirst- and busLastWordTimeAndreas Hansson
This patch adds a check to ensure that the delay incurred by the bus is not simply disregarded, but accounted for by someone. At this point, all the modules do is to zero it out, and no additional time is spent. This highlights where the bus timing is simply dropped instead of being paid for. As a follow up, the locations identified in this patch should add this additional time to the packets in one way or another. For now it simply acts as a sanity check and highlights where the delay is simply ignored. Since no time is added, all regressions remain the same.
2012-11-02sim: Move the draining interface into a separate base classAndreas Sandberg
This patch moves the draining interface from SimObject to a separate class that can be used by any object needing draining. However, objects not visible to the Python code (i.e., objects not deriving from SimObject) still depend on their parents informing them when to drain. This patch also gets rid of the CountedDrainEvent (which isn't really an event) and replaces it with a DrainManager.
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-07-09Port: Align port names in C++ and PythonAndreas Hansson
This patch is a first step to align the port names used in the Python world and the C++ world. Ultimately it serves to make the use of config.json together with output from the simulation easier, including post-processing of statistics. Most notably, the CPU, cache, and bus is addressed in this patch, and there might be other ports that should be updated accordingly. The dash name separator has also been replaced with a "." which is what is used to concatenate the names in python, and a separation is made between the master and slave port in the bus.
2012-07-09Port: Make getAddrRanges constAndreas Hansson
This patch makes getAddrRanges const throughout the code base. There is no reason why it should not be, and making it const prevents adding any unintentional side-effects.
2012-05-23DMA: Split the DMA device and IO device into seperate filesAndreas Hansson
This patch moves the DMA device to its own set of files, splitting it from the IO device. There are no behavioural changes associated with this patch. The patch also grabs the opportunity to do some very minor tidying up, including some white space removal and pruning some redundant parameters. Besides the immediate benefits of the separation-of-concerns, this patch also makes upcoming changes more streamlined as it split the devices that are only slaves and the DMA device that also acts as a master. --HG-- rename : src/dev/io_device.cc => src/dev/dma_device.cc rename : src/dev/io_device.hh => src/dev/dma_device.hh
2012-05-23MEM: Add a snooping DMA port subclass for table walkerAndreas Hansson
This patch makes the (device) DmaPort non-snooping and removes the recvSnoop constructor parameter and instead introduces a SnoopingDmaPort subclass for the ARM table walker. Functionality is unchanged, as are the stats, and the patch merely clarifies that the normal DMA ports are not snooping (although they may issue requests that are snooped by others, as done with PCI, PCIe, AMBA4 ACE etc). Currently this port is declared in the ARM table walker as it is not used anywhere else. If other ports were to have similar behaviour it could be moved in a future patch.
2012-05-01MEM: Separate requests and responses for timing accessesAndreas Hansson
This patch moves send/recvTiming and send/recvTimingSnoop from the Port base class to the MasterPort and SlavePort, and also splits them into separate member functions for requests and responses: send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq, send/recvTimingSnoopResp. A master port sends requests and receives responses, and also receives snoop requests and sends snoop responses. A slave port has the reciprocal behaviour as it receives requests and sends responses, and sends snoop requests and receives snoop responses. For all MemObjects that have only master ports or slave ports (but not both), e.g. a CPU, or a PIO device, this patch merely adds more clarity to what kind of access is taking place. For example, a CPU port used to call sendTiming, and will now call sendTimingReq. Similarly, a response previously came back through recvTiming, which is now recvTimingResp. For the modules that have both master and slave ports, e.g. the bus, the behaviour was previously relying on branches based on pkt->isRequest(), and this is now replaced with a direct call to the apprioriate member function depending on the type of access. Please note that send/recvRetry is still shared by all the timing accessors and remains in the Port base class for now (to maintain the current bus functionality and avoid changing the statistics of all regressions). The packet queue is split into a MasterPort and SlavePort version to facilitate the use of the new timing accessors. All uses of the PacketQueue are updated accordingly. With this patch, the type of packet (request or response) is now well defined for each type of access, and asserts on pkt->isRequest() and pkt->isResponse() are now moved to the appropriate send member functions. It is also worth noting that sendTimingSnoopReq no longer returns a boolean, as the semantics do not alow snoop requests to be rejected or stalled. All these assumptions are now excplicitly part of the port interface itself.
2012-04-14MEM: Remove the Broadcast destination from the packetAndreas Hansson
This patch simplifies the packet by removing the broadcast flag and instead more firmly relying on (and enforcing) the semantics of transactions in the classic memory system, i.e. request packets are routed from a master to a slave based on the address, and when they are created they have neither a valid source, nor destination. On their way to the slave, the request packet is updated with a source field for all modules that multiplex packets from multiple master (e.g. a bus). When a request packet is turned into a response packet (at the final slave), it moves the potentially populated source field to the destination field, and the response packet is routed through any multiplexing components back to the master based on the destination field. Modules that connect multiplexing components, such as caches and bridges store any existing source and destination field in the sender state as a stack (just as before). The packet constructor is simplified in that there is no longer a need to pass the Packet::Broadcast as the destination (this was always the case for the classic memory system). In the case of Ruby, rather than using the parameter to the constructor we now rely on setDest, as there is already another three-argument constructor in the packet class. In many places where the packet information was printed as part of DPRINTFs, request packets would be printed with a numeric "dest" that would always be -1 (Broadcast) and that field is now removed from the printing.
2012-04-14MEM: Separate snoops and normal memory requests/responsesAndreas Hansson
This patch introduces port access methods that separates snoop request/responses from normal memory request/responses. The differentiation is made for functional, atomic and timing accesses and builds on the introduction of master and slave ports. Before the introduction of this patch, the packets belonging to the different phases of the protocol (request -> [forwarded snoop request -> snoop response]* -> response) all use the same port access functions, even though the snoop packets flow in the opposite direction to the normal packet. That is, a coherent master sends normal request and receives responses, but receives snoop requests and sends snoop responses (vice versa for the slave). These two distinct phases now use different access functions, as described below. Starting with the functional access, a master sends a request to a slave through sendFunctional, and the request packet is turned into a response before the call returns. In a system without cache coherence, this is all that is needed from the functional interface. For the cache-coherent scenario, a slave also sends snoop requests to coherent masters through sendFunctionalSnoop, with responses returned within the same packet pointer. This is currently used by the bus and caches, and the LSQ of the O3 CPU. The send/recvFunctional and send/recvFunctionalSnoop are moved from the Port super class to the appropriate subclass. Atomic accesses follow the same flow as functional accesses, with request being sent from master to slave through sendAtomic. In the case of cache-coherent ports, a slave can send snoop requests to a master through sendAtomicSnoop. Just as for the functional access methods, the atomic send and receive member functions are moved to the appropriate subclasses. The timing access methods are different from the functional and atomic in that requests and responses are separated in time and send/recvTiming are used for both directions. Hence, a master uses sendTiming to send a request to a slave, and a slave uses sendTiming to send a response back to a master, at a later point in time. Snoop requests and responses travel in the opposite direction, similar to what happens in functional and atomic accesses. With the introduction of this patch, it is possible to determine the direction of packets in the bus, and no longer necessary to look for both a master and a slave port with the requested port id. In contrast to the normal recvFunctional, recvAtomic and recvTiming that are pure virtual functions, the recvFunctionalSnoop, recvAtomicSnoop and recvTimingSnoop have a default implementation that calls panic. This is to allow non-coherent master and slave ports to not implement these functions.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-22MEM: Split SimpleTimingPort into PacketQueue and portsAndreas Hansson
This patch decouples the queueing and the port interactions to simplify the introduction of the master and slave ports. By separating the queueing functionality from the port itself, it becomes much easier to distinguish between master and slave ports, and still retain the queueing ability for both (without code duplication). As part of the split into a PacketQueue and a port, there is now also a hierarchy of two port classes, QueuedPort and SimpleTimingPort. The QueuedPort is useful for ports that want to leave the packet transmission of outgoing packets to the queue and is used by both master and slave ports. The SimpleTimingPort inherits from the QueuedPort and adds the implemention of recvTiming and recvFunctional through recvAtomic. The PioPort and MessagePort are cleaned up as part of the changes. --HG-- rename : src/mem/tport.cc => src/mem/packet_queue.cc rename : src/mem/tport.hh => src/mem/packet_queue.hh
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.
2012-02-12mem: Add a master ID to each request object.Ali Saidi
This change adds a master id to each request object which can be used identify every device in the system that is capable of issuing a request. This is part of the way to removing the numCpus+1 stats in the cache and replacing them with the master ids. This is one of a series of changes that make way for the stats output to be changed to python.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-17MEM: Simplify ports by removing EventManagerAndreas Hansson
This patch removes the inheritance of EventManager from the ports and moves all responsibility for event queues to the owner. Eventually the event manager should be the interface block, which could either be the structural owner or a subblock like a LSQ in the O3 CPU for example.
2012-01-10DPRINTF: Improve some dprintf messages.Nilay Vaish
2012-01-07Another merge with the main repository.Gabe Black
2012-01-07Merge with the main repository again.Gabe Black
2012-01-07Merge with main repository.Gabe Black
2011-12-15IO: Fix bug in DMA Device where receiving a snoop on DMA port would cause a ↵Ali Saidi
panic. --HG-- extra : rebase_source : 8152d4fa7d7354c9f150a450ae0710e95141ba4b
2011-12-01Device: Make changes necessary to support a coherent page walker cache.Mitchell Hayenga
Adds the flag 'recvSnoops' which enables pagewalkers using DmaPorts, to properly configure snoops. --HG-- extra : rebase_source : 64207bef62c3268ddff2236ee4adae873812325f
2011-10-20dev: clean up PioDevice and DmaDevive getPort() methods.Steve Reinhardt
Make DmaDevice::getPort() call PioDevice::getPort() instead of just copying and pasting the code. Also move definitions from .hh to .cc file.
2011-10-08Ports: Print the port name when a port is used but not attached to anything.Gabe Black
2011-10-04SE/FS: Put platform pointers in fewer objects.Gabe Black
Not all objects need a platform pointer, and having one creates a dependence on their being a platform object. This change removes the platform pointer to from the base device object and moves it into subclasses that actually need it.
2011-04-15trace: reimplement the DTRACE function so it doesn't use a vectorNathan Binkert
At the same time, rename the trace flags to debug flags since they have broader usage than simply tracing. This means that --trace-flags is now --debug-flags and --trace-help is now --debug-help
2011-04-15includes: sort all includesNathan Binkert
2011-03-17Mem: Fix issue with dirty block being lost when entire block transferred to ↵Ali Saidi
non-cache. This change fixes the problem for all the cases we actively use. If you want to try more creative I/O device attachments (E.g. sharing an L2), this won't work. You would need another level of caching between the I/O device and the cache (which you actually need anyway with our current code to make sure writes propagate). This is required so that you can mark the cache in between as top level and it won't try to send ownership of a block to the I/O device. Asserts have been added that should catch any issues.
2011-01-07Replace curTick global variable with accessor functions.Steve Reinhardt
This step makes it easy to replace the accessor functions (which still access a global variable) with ones that access per-thread curTick values.
2010-11-08Bus: Have the I/O devices that return address ranges print them out.Ali Saidi
This way we actually get device names associated with the devices.
2010-08-23Devices: Allow a device to specify that a request is uncachable.Gene Wu
2010-06-02DMA: Make DmaPort generic enough to be used other placesAli Saidi
2008-10-09eventq: convert all usage of events to use the new API.Nathan Binkert
For now, there is still a single global event queue, but this is necessary for making the steps towards a parallelized m5.
2008-08-26Device: Fix bug in DmaPort::recvRetry. The interface attempts to send the ↵Clint Smullen
same packet again. It doesn't cause a problem currently, however with a different Memory Object it could cause problems
2008-08-13Add the ability for a DMA to tack on an extra delay after the DMA is ↵Ali Saidi
actually finished.
2007-07-26Merge python and x86 changes with cache branchNathan Binkert
--HG-- extra : convert_revision : e06a950964286604274fba81dcca362d75847233
2007-07-23Major changes to how SimObjects are created and initialized. Almost allNathan Binkert
creation and initialization now happens in python. Parameter objects are generated and initialized by python. The .ini file is now solely for debugging purposes and is not used in construction of the objects in any way. --HG-- extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
2007-07-14Merge of DPRINTF fixes from head.Steve Reinhardt
--HG-- extra : convert_revision : f99a33b2df6a6c5592856d17d00e73ee83267442
2007-07-14Fix & tweak DPRINTFs for tracediff w/new cache code.Steve Reinhardt
Note that we should *not* print pointer values in DPRINTFs as these needlessly clutter tracediff output. --HG-- extra : convert_revision : 25a448f1b3ac8d453a717a104ad6dc0112fb30bb
2007-06-30Get rid of Packet result field. Error responses areSteve Reinhardt
now encoded in cmd field. --HG-- extra : convert_revision : d67819b7e3ee4b9a5bf08541104de0a89485e90b
2007-05-21Change getDeviceAddressRanges to use bool for snoop arg.Steve Reinhardt
--HG-- extra : convert_revision : 832e52ba80cbab2f5bb6d5b5977a499d41b4d638
2007-05-14add uglyiness to fix dmasAli Saidi
src/dev/io_device.cc: extra printing and assertions src/mem/bridge.hh: deal with packets only satisfying part of a request by making many requests src/mem/cache/cache_impl.hh: make the cache try to satisfy a functional request from the cache above it before checking itself --HG-- extra : convert_revision : 1df52ab61d7967e14cc377c560495430a6af266a
2007-05-09update for new reschedule semanticsAli Saidi
--HG-- extra : convert_revision : 8c18b2513d638f67cc096e7f1483b47390a374ca
2007-05-09add a backoff algorithm when nacks are received by devicesAli Saidi
add seperate response buffers and request queue sizes in bus bridge add delay to respond to a nack in the bus bridge src/dev/i8254xGBe.cc: src/dev/ide_ctrl.cc: src/dev/ns_gige.cc: src/dev/pcidev.hh: src/dev/sinic.cc: add backoff delay parameters src/dev/io_device.cc: src/dev/io_device.hh: add a backoff algorithm when nacks are received. src/mem/bridge.cc: src/mem/bridge.hh: add seperate response buffers and request queue sizes add a new parameters to specify how long before a nack in ready to go after a packet that needs to be nacked is received src/mem/cache/cache_impl.hh: assert on the src/mem/tport.cc: add a friendly assert to make sure the packet was inserted into the list --HG-- extra : convert_revision : 3595ad932015a4ce2bb72772da7850ad91bd09b1
2006-10-31Ports now have a pointer to the MemObject that owns it (can be NULL).Kevin Lim
src/cpu/simple/atomic.hh: Port now takes in the MemObject that owns it. src/cpu/simple/timing.hh: Port now takes in MemObject that owns it. src/dev/io_device.cc: src/mem/bus.hh: Ports now take in the MemObject that owns it. src/mem/cache/base_cache.cc: Ports now take in the MemObject that own it. src/mem/port.hh: src/mem/tport.hh: Ports now optionally take in the MemObject that owns it. --HG-- extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
2006-10-20Use PacketPtr everywhereNathan Binkert
--HG-- extra : convert_revision : d9eb83ab77ffd2d725961f295b1733137e187711
2006-08-30Move more common functionality into SimpleTimingPort,Steve Reinhardt
allowing derived classes to be simplified. --HG-- extra : convert_revision : c980d3aec5e6c044d8f41e96252726fe9a256605