| Age | Commit message (Collapse) | Author |
|---|
|
The length of the strncpy should be one less than the destination to
ensure that there is space for the last NULL byte in case the source
is longer than the destination.
Change-Id: Iea65fa6327c8242bd8ddf4bf9a5a2b5164996495
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/8561
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.
Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
* When dispatching multiple gem5 simulations at once, they race
for the socket id, resulting in a panic when calling 'bind'. To
avoid this problem, the socket id is now created before the diod
process is created. In case of a race, a panic is called in the
gem5 process, whereas before the panic was called in the diod
process where it didn't have any effect.
* In some cases killing the diod process in terminateDiod() using
only SIGTERM failed, so a call using SIGKILL is added.
Change-Id: Ie10741e10af52c8d255210cd4bfe0e5d761485d3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2821
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
With the change we explicitly update the types for the VirtIO bit
masks to be Addr (uint64_t). By changing this, we ensure type
promotion where it is needed. Therefore, this fixes issues where, in
certain situations, address calculations were performed in 32-bits,
resulting in overflows.
Change-Id: I5c5c3f9a3f94e806812282da01268e18ae0d2d39
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3968
|
|
This commit adds support for diod to use a unix socket, rather
than a TCP port. We don't rely on the IP-based connection as we
directly use pipes to interact with diod. This allows it to work
on any system, even if the specific port is taken by another diod
instance (or similar). Secondly, the Unix socket could in theory
be used to debug. However, this functionality has not been
tested.
Change-Id: I616e0ad8768da1dfc867de3af98cdfbb22a72d63
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2820
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When setting the size of a PCI BAR, the kernel only supports powers of
two (as per the PCI spec). Previously, the size was incorrectly read
by the kernel, and the address ranges assigned to the PCI devices
could overlap, resulting in gem5 crashes. We now round up to the next
power of two.
Kudos to Sergei Trofimov who helped to debug this issue!
Change-Id: I54ca399b62ea07c09d4cd989b17dfa670e841bbe
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Sergei Trofimov <sergei.trofimov@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2580
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
|
|
VirtIO transport interfaces always expect a VirtIO device
pointer. However, there are cases (in particular when using VirtIO's
MMIO interface) where we want to instantiate an interface without a
device. Add a dummy device using VirtIO device ID 0 and no queues to
handle this use case.
Change-Id: I6cbe12fd403903ef585be40279c3b1321fde48ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2325
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Rename VIOPci -> VIOIface to avoid having a separate flag for the MMIO
interface.
Change-Id: I99f9210fa36ce33662c48537fd3992cd9a69d349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2324
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
|
|
VirtIO spec < 1.0 demands IOREG to be used on PCI and not memory mapped.
Set the correct bit on the PCI address accordingly.
Committed by Jason Lowe-Power <power.jg@gmail.com>
|
|
Result of running 'hg m5style --skip-all --fix-control -a'.
|
|
Move the IDE controller and the disk implementations to
src/dev/storage.
--HG--
rename : src/dev/DiskImage.py => src/dev/storage/DiskImage.py
rename : src/dev/Ide.py => src/dev/storage/Ide.py
rename : src/dev/SimpleDisk.py => src/dev/storage/SimpleDisk.py
rename : src/dev/disk_image.cc => src/dev/storage/disk_image.cc
rename : src/dev/disk_image.hh => src/dev/storage/disk_image.hh
rename : src/dev/ide_atareg.h => src/dev/storage/ide_atareg.h
rename : src/dev/ide_ctrl.cc => src/dev/storage/ide_ctrl.cc
rename : src/dev/ide_ctrl.hh => src/dev/storage/ide_ctrl.hh
rename : src/dev/ide_disk.cc => src/dev/storage/ide_disk.cc
rename : src/dev/ide_disk.hh => src/dev/storage/ide_disk.hh
rename : src/dev/ide_wdcreg.h => src/dev/storage/ide_wdcreg.h
rename : src/dev/simple_disk.cc => src/dev/storage/simple_disk.cc
rename : src/dev/simple_disk.hh => src/dev/storage/simple_disk.hh
|
|
Move pcidev.(hh|cc) to src/dev/pci/device.(hh|cc) and update existing
devices to use the new header location. This also renames the PCIDEV
debug flag to have a capitalization that is consistent with the PCI
host and other devices.
--HG--
rename : src/dev/Pci.py => src/dev/pci/PciDevice.py
rename : src/dev/pcidev.cc => src/dev/pci/device.cc
rename : src/dev/pcidev.hh => src/dev/pci/device.hh
rename : src/dev/pcireg.h => src/dev/pci/pcireg.h
|
|
This patch adds very basic checkpoint support for the VirtIO9PProxy
device. Previously, attempts to checkpoint gem5 with a present 9P
device caused gem5 to fatal as none of the state is tracked. We still
do not track any state, but we replace the fatal with a warning which
is triggered if the device has been used by the guest system. In the
event that it has not been used, we assume that no state is lost
during checkpointing. The warning is triggered on both a serialize and
an unserialize to ensure maximum visibility for the user.
|
|
This patch adds explicit overrides as this is now required when using
"-Wall" with clang >= 3.5, the latter now part of the most recent
XCode. The patch consequently removes "virtual" for those methods
where "override" is added. The latter should be enough of an
indication.
As part of this patch, a few minor issues that clang >= 3.5 complains
about are also resolved (unused methods and variables).
|
|
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.
|
|
Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:
* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.
* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.
* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).
* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.
* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.
|
|
Correctly clear the PCI interrupt belonging to a VirtIO device when
the ISR register is read.
|
|
The VirtIO devices didn't correctly set the response flags in memory
packets. This changeset adds the required Packet::makeResponse()
calls.
|
|
This patch cleans up the packet memory allocation confusion. The data
is always allocated at the requesting side, when a packet is created
(or copied), and there is never a need for any device to allocate any
space if it is merely responding to a paket. This behaviour is in line
with how SystemC and TLM works as well, thus increasing
interoperability, and matching established conventions.
The redundant calls to Packet::allocate are removed, and the checks in
the function are tightened up to make sure data is only ever allocated
once. There are still some oddities in the packet copy constructor
where we copy the data pointer if it is static (without ownership),
and allocate new space if the data is dynamic (with ownership). The
latter is being worked on further in a follow-on patch.
|
|
Mostly addressing uninitialised members.
|
|
This patch adds support for 9p filesystem proxying over VirtIO. It can
currently operate by connecting to a 9p server over a socket
(VirtIO9PSocket) or by starting the diod 9p server and connecting over
pipe (VirtIO9PDiod).
*WARNING*: Checkpoints are currently not supported for systems with 9p
proxies!
|
|
|
|
|
|
This patch adds support for VirtIO over the PCI bus. It does so by
providing the following new SimObjects:
* VirtIODeviceBase - Abstract base class for VirtIO devices.
* PciVirtIO - VirtIO PCI transport interface.
A VirtIO device is hooked up to the guest system by adding a PciVirtIO
device to the PCI bus and connecting it to a VirtIO device using the
vio parameter.
New VirtIO devices should inherit from VirtIODevice base and
implementing one or more VirtQueues. The VirtQueues are usually
device-specific and all derive from the VirtQueue class. Queues must
be registered with the base class from the constructor since the
device assumes that the number of queues stay constant.
|
