Age | Commit message (Collapse) | Author |
|
This was really only in the PC platform class.
Change-Id: I5365d965ea335a7c45be9f80706a875b19ed0417
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
That abstracts the ISA further from the CPU, getting us a small step
closer to being able to build in more than one ISA at a time.
Change-Id: Ibf7e26a3df411ffe994ac1e11d2a53b656863223
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20831
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This removes the recvResponse callback from the IntMasterPort, and
makes it easier to handle the default case where we just need to clean
up the Packet.
Change-Id: I8bcbfee0aaf68b12310d773f925c399fc87ea65d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20828
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
The devices which host an IntMasterPort are very specific to x86 at the
moment, but the ports don't have to be. This change moves
responsibilities around so that the x86 specific aspects are handled
in the device, and the ports themselves are ISA agnostic.
Change-Id: I50141b66895be7d8f6303605505002ef424af7fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20827
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
There is no interrupt response message, and so no need for a function
which would construct one. The other functions which construct the
request can be consolidated since the work being done by each is
incremental. The template parameters can be used to support multiple
types and offsets in a single function, and since that function also
doesn't have to do much work, it makes sense to do everything in one
shot.
Change-Id: I41b202a263a697c5ada6817f3ab2a4728281b894
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20826
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
Most of its functionality has been exported already. This change makes
the two classes which were inheriting IntDevice create an IntMasterPort
themselves.
Change-Id: I73d17cd79cf8252b0e26dd2576f552bf9054adf4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20825
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Originally MessageReq was intended to mark a packet as a holding a
message destined for a particular recipient and which would not
interact with other packets.
This is similar to the way a WriteReq would behave if writing to a
device register which needs to be updated atomically. Also, while the
memory system *could* recognize a MessageReq and know that it didn't
need to interact with other packets, that was never implemented.
Change-Id: Ie54301d1d8820e206d6bae96e200ae8c71d2d784
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20823
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This makes the IntMasterPort usable with any class, making it possible
to avoid inheriting from IntDevice.
It also makes IntMasterPort inherit directly from QueuedMasterPort,
skipping over MessageMasterPort.
Change-Id: I9d218556c838ea567ced5f6fa4d57a3ec9d28d31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20821
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This makes the device IntSlavePort calls back into based on a template
parameter so that IntDevice doesn't have to be in the inheritance
hierarchy to use it.
It also makes IntSlavePort inherit from SimpleTimingPort directly,
skipping over MessageSlavePort.
Change-Id: Ic3213edc9c3ed5e506ee1e9f5e082cd47d7c7998
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20820
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I3915f0ad673119b551dcc4c5cedec180a9b88735
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20702
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: I4551ad00cf205c31555c90b53e87bc206a8d8729
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20701
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.
Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Replace the getMasterPort, getSlavePort, and getEthPort functions
with getPort, and remove extraneous mechanisms that are no longer
necessary.
Change-Id: Iab7e3c02d2f3a0cf33e7e824e18c28646b5bc318
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17040
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
We know data is little endian, so we can use those accessors
explicitly.
Change-Id: I09aa7f1e525ad1346e932ce4a772b64bf59dc350
Reviewed-on: https://gem5-review.googlesource.com/c/13456
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Add support for keyboard input from the VNC server in the PS/2
keyboard model. The introduced code is based on the functionality in
the Arm PL050 KMI model.
Change-Id: If04a9713e5a15e2149d1a7471b999e3060d8ee7d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9763
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
PS/2 devices are currently emulated both in the i8042 model and the
Arm KMI model. This is undesirable since it leads to code duplication.
This change introduces a common PS/2 device interface and factor out
the x86 keyboard and mouse model. A subsequent commit will implement
support for this interface in the Arm KMI model.
Change-Id: I440e83517fd9dce362fdc1676db477cc6eee5211
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9762
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The patch that added M5_FALLTHROUGH (5c41076bd7610 misc: Updates for gcc7.2
for x86) incorrectly added breaks to the i8042 device without implementing
the correct functions. This patch implements keyboard writes, but ignores
output writes.
Information on the PS2 controller can be found at
https://wiki.osdev.org/%228042%22_PS/2_Controller
Note: Without this patch Linux 4.14 won't boot.
Change-Id: I7de137b46cef00e6c1f1c14335cb52107cd7fe5b
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/7301
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
They are now oriented around a class which makes it easy to provide
custom setter/getter functions which let you set or read bits in an
arbitrary way.
Future additions may add the ability to add custom bitfield methods,
and index-able bitfields.
Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333
Reviewed-on: https://gem5-review.googlesource.com/7201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
A recent serial device refactoring changed the name of the parameter
that the terminal device gets attached to on the UART. The x86 and
SPARC platform devices didn't get updated though, and were still using
the old name. This change updates those objects.
Reported-by: Kanad Basu <kanad.kut@gmail.com>
Change-Id: I0824a9df8639062d8561420ea9ffea26b8b7e2e9
Reviewed-on: https://gem5-review.googlesource.com/5781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
|
|
Since the last round of fixes a few new issues have snuck in. We
should consider switching the regression runs to clang.
|
|
Result of running 'hg m5style --skip-all --fix-white -a'.
|
|
The gem5's current PCI host functionality is very ad hoc. The current
implementations require PCI devices to be hooked up to the
configuration space via a separate configuration port. Devices query
the platform to get their config-space address range. Un-mapped parts
of the config space are intercepted using the XBar's default port
mechanism and a magic catch-all device (PciConfigAll).
This changeset redesigns the PCI host functionality to improve code
reuse and make config-space and interrupt mapping more
transparent. Existing platform code has been updated to use the new
PCI host and configured to stay backwards compatible (i.e., no
guest-side visible changes). The current implementation does not
expose any new functionality, but it can easily be extended with
features such as automatic interrupt mapping.
PCI devices now register themselves with a PCI host controller. The
host controller interface is defined in the abstract base class
PciHost. Registration is done by PciHost::registerDevice() which takes
the device, its bus position (bus/dev/func tuple), and its interrupt
pin (INTA-INTC) as a parameter. The registration interface returns a
PciHost::DeviceInterface that the PCI device can use to query memory
mappings and signal interrupts.
The host device manages the entire PCI configuration space. Accesses
to devices decoded into the devices bus position and then forwarded to
the correct device.
Basic PCI host functionality is implemented in the GenericPciHost base
class. Most platforms can use this class as a basic PCI controller. It
provides the following functionality:
* Configurable configuration space decoding. The number of bits
dedicated to a device is a prameter, making it possible to support
both CAM, ECAM, and legacy mappings.
* Basic interrupt mapping using the interruptLine value from a
device's configuration space. This behavior is the same as in the
old implementation. More advanced controllers can override the
interrupt mapping method to dynamically assign host interrupts to
PCI devices.
* Simple (base + addr) remapping from the PCI bus's address space to
physical addresses for PIO, memory, and DMA.
|
|
Make clang >= 3.5 happy when compiling build/X86/gem5.opt on OSX.
|
|
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.
|
|
Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.
|
|
IntDevice::recvResponse is called from two places in current mainline: (1) the
short circuit path of X86ISA::IntDevice::IntMasterPort::sendMessage for atomic
mode, and (2) the full request->response path to and from the x86 interrupts
device (finally called from MessageMasterPort::recvTimingResp). In the former
case, the packet was deleted correctly, but in the latter case, the packet and
request leak. To fix the leak, move request and packet deletion into IntDevice
inherited class implementations of recvResponse.
|
|
The i8042 device drops the contents of a PS2 device's buffer when
serializing, which results in corrupted PS2 state when continuing
simulation after a checkpoint. This changeset fixes this bug and
transitions the i8042 model to use the new serialization API that
requires the serialize() method to be const.
|
|
Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:
* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.
* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.
* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).
* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.
* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.
|
|
This patch clarifies the packet timings annotated
when going through a crossbar.
The old 'firstWordDelay' is replaced by 'headerDelay' that represents
the delay associated to the delivery of the header of the packet.
The old 'lastWordDelay' is replaced by 'payloadDelay' that represents
the delay needed to processing the payload of the packet.
For now the uses and values remain identical. However, going forward
the payloadDelay will be additive, and not include the
headerDelay. Follow-on patches will make the headerDelay capture the
pipeline latency incurred in the crossbar, whereas the payloadDelay
will capture the additional serialisation delay.
|
|
This change includes edits to Intel8254Timer to prevent counter events firing
before startup to comply with SimObject initialization call sequence.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This change includes edits to MC146818 timer to prevent RTC events
firing before startup to comply with SimObject initialization call sequence.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
There was already a stub device at 0x80, the port traditionally used for an IO
delay. 0x80 is also the port used for POST codes sent by firmware, and that
may have prompted adding this port as a second option.
|
|
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.
As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
|
|
The PC platform has a single IO range that is used both legacy IO and PCI IO
while other platforms may use seperate regions. Provide another mechanism to
configure the legacy IO base address range and set it to the PCI IO address
range for x86.
|
|
Stop setting the use_default_range flag in PioBus in order to
have random bad addresses result in a BadAddress response and
not a gem5 fatal error. This is necessary in Ruby as Ruby is
connected directly to PioBus, so misspeculated addresses will
be sent there directly. For the classic memory system, this
change has no effect, as bad addresses are caught by the
memory bus before being sent to the PioBus.
This work was done while Binh was an intern at AMD Research.
|
|
This patch adds support for simulating with multiple threads, each of
which operates on an event queue. Each sim object specifies which eventq
is would like to be on. A custom barrier implementation is being added
using which eventqs synchronize.
The patch was tested in two different configurations:
1. ruby_network_test.py: in this simulation L1 cache controllers receive
requests from the cpu. The requests are replied to immediately without
any communication taking place with any other level.
2. twosys-tsunami-simple-atomic: this configuration simulates a client-server
system which are connected by an ethernet link.
We still lack the ability to communicate using message buffers or ports. But
other things like simulation start and end, synchronizing after every quantum
are working.
Committed by: Nilay Vaish
|
|
Instead of relying on derived classes explicitly assigning
to the BasicPioDevice pioSize field, require them to pass
a size value in to the constructor.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
PciDev and IntDev stuck out as the only device classes that
ended in 'Dev' rather than 'Device'. This patch takes care
of that inconsistency.
Note that you may need to delete pre-existing files matching
build/*/python/m5/internal/param_* as scons does not pick up
indirect dependencies on imported python modules when generating
params, and the PciDev -> PciDevice rename takes place in a
file (dev/Device.py) that gets imported quite a bit.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
A couple of devices that have single fixed memory mapped regions
were not derived from BasicPioDevice, when that's exactly
the functionality that BasicPioDevice provides. This patch
gets rid of a little bit of redundant code by making those
devices actually do so.
Also fixed the weird case of X86ISA::Interrupts, where
the class already did derive from BasicPioDevice but
didn't actually use all the features it could have.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
It is possible that operating system wants to shutdown the
lapic timer by writing timer's initial count to 0. This patch
adds a check that the timer event is only scheduled if the
count is 0.
The patch also converts few of the panics related to the keyboard
to warnings since we are any way not interested in simulating the
keyboard.
|
|
This patch fixes the warnings that clang3.2svn emit due to the "-Wall"
flag. There is one case of an uninitialised value in the ARM neon ISA
description, and then a whole range of unused private fields that are
pruned.
|
|
This patch adds a check to ensure that the delay incurred by
the bus is not simply disregarded, but accounted for by someone. At
this point, all the modules do is to zero it out, and no additional
time is spent. This highlights where the bus timing is simply dropped
instead of being paid for.
As a follow up, the locations identified in this patch should add this
additional time to the packets in one way or another. For now it
simply acts as a sanity check and highlights where the delay is simply
ignored.
Since no time is added, all regressions remain the same.
|
|
Virtualized CPUs and the fastmem mode of the atomic CPU require direct
access to physical memory. We currently require caches to be disabled
when using them to prevent chaos. This is not ideal when switching
between hardware virutalized CPUs and other CPU models as it would
require a configuration change on each switch. This changeset
introduces a new version of the atomic memory mode,
'atomic_noncaching', where memory accesses are inserted into the
memory system as atomic accesses, but bypass caches.
To make memory mode tests cleaner, the following methods are added to
the System class:
* isAtomicMode() -- True if the memory mode is 'atomic' or 'direct'.
* isTimingMode() -- True if the memory mode is 'timing'.
* bypassCaches() -- True if caches should be bypassed.
The old getMemoryMode() and setMemoryMode() methods should never be
used from the C++ world anymore.
|
|
When casting objects in the generated SWIG interfaces, SWIG uses
classical C-style casts ( (Foo *)bar; ). In some cases, this can
degenerate into the equivalent of a reinterpret_cast (mainly if only a
forward declaration of the type is available). This usually works for
most compilers, but it is known to break if multiple inheritance is
used anywhere in the object hierarchy.
This patch introduces the cxx_header attribute to Python SimObject
definitions, which should be used to specify a header to include in
the SWIG interface. The header should include the declaration of the
wrapped object. We currently don't enforce header the use of the
header attribute, but a warning will be generated for objects that do
not use it.
|
|
This patch adds an additional level of ports in the inheritance
hierarchy, separating out the protocol-specific and protocl-agnostic
parts. All the functionality related to the binding of ports is now
confined to use BaseMaster/BaseSlavePorts, and all the
protocol-specific parts stay in the Master/SlavePort. In the future it
will be possible to add other protocol-specific implementations.
The functions used in the binding of ports, i.e. getMaster/SlavePort
now use the base classes, and the index parameter is updated to use
the PortID typedef with the symbolic InvalidPortID as the default.
|