summaryrefslogtreecommitdiff
path: root/src/dev/x86
AgeCommit message (Collapse)Author
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-10-15Fix: Address a few minor issues identified by cppcheckAndreas Hansson
This patch addresses a number of smaller issues identified by the code inspection utility cppcheck. There are a number of identified leaks in the arm/linux/system.cc (although the function only get's called once so it is not a major problem), a few deletes in dev/x86/i8042.cc that were not array deletes, and sprintfs where the character array had one element less than needed. In the IIC tags there was a function allocating an array of longs which is in fact never used.
2012-09-19AddrRange: Transition from Range<T> to AddrRangeAndreas Hansson
This patch takes the final plunge and transitions from the templated Range class to the more specific AddrRange. In doing so it changes the obvious Range<Addr> to AddrRange, and also bumps the range_map to be AddrRangeMap. In addition to the obvious changes, including the removal of redundant includes, this patch also does some house keeping in preparing for the introduction of address interleaving support in the ranges. The Range class is also stripped of all the functionality that is never used. --HG-- rename : src/base/range.hh => src/base/addr_range.hh rename : src/base/range_map.hh => src/base/addr_range_map.hh
2012-08-22Port: Extend the QueuedPort interface and use where appropriateAndreas Hansson
This patch extends the queued port interfaces with methods for scheduling the transmission of a timing request/response. The methods are named similar to the corresponding sendTiming(Snoop)Req/Resp, replacing the "send" with "sched". As the queues are currently unbounded, the methods always succeed and hence do not return a value. This functionality was previously provided in the subclasses by calling PacketQueue::schedSendTiming with the appropriate parameters. With this change, there is no need to introduce these extra methods in the subclasses, and the use of the queued interface is more uniform and explicit.
2012-08-21Device: Remove overloaded pio_latency parameterAndreas Hansson
This patch removes the overloading of the parameter, which seems both redundant, and possibly incorrect. The PciConfigAll now also uses a Param.Latency rather than a Param.Tick. For backwards compatibility it still sets the pio_latency to 1 tick. All the comments have also been updated to not state that it is in simticks when it is not necessarily the case.
2012-07-09Port: Make getAddrRanges constAndreas Hansson
This patch makes getAddrRanges const throughout the code base. There is no reason why it should not be, and making it const prevents adding any unintentional side-effects.
2012-04-05Config: corrects the way Ruby attaches to the DMA portsNilay Vaish
With recent changes to the memory system, a port cannot be assigned a peer port twice. While making use of the Ruby memory system in FS mode, DMA ports were assigned peer twice, once for the classic memory system and once for the Ruby memory system. This patch removes this double assignment of peer ports.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-22MEM: Split SimpleTimingPort into PacketQueue and portsAndreas Hansson
This patch decouples the queueing and the port interactions to simplify the introduction of the master and slave ports. By separating the queueing functionality from the port itself, it becomes much easier to distinguish between master and slave ports, and still retain the queueing ability for both (without code duplication). As part of the split into a PacketQueue and a port, there is now also a hierarchy of two port classes, QueuedPort and SimpleTimingPort. The QueuedPort is useful for ports that want to leave the packet transmission of outgoing packets to the queue and is used by both master and slave ports. The SimpleTimingPort inherits from the QueuedPort and adds the implemention of recvTiming and recvFunctional through recvAtomic. The PioPort and MessagePort are cleaned up as part of the changes. --HG-- rename : src/mem/tport.cc => src/mem/packet_queue.cc rename : src/mem/tport.hh => src/mem/packet_queue.hh
2012-02-24MEM: Prepare mport for master/slave splitAndreas Hansson
This patch simplifies the mport in preparation for a split into a master and slave role for the message ports. In particular, sendMessageAtomic was only used in a single location and similarly so sendMessageTiming. The affected interrupt device is updated accordingly.
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17MEM: Removing the default port peer from Python portsAndreas Hansson
In preparation for the introduction of Master and Slave ports, this patch removes the default port parameter in the Python port and thus forces the argument list of the Port to contain only the description. The drawback at this point is that the config port and dma port of PCI and DMA devices have to be connected explicitly. This is key for future diversification as the pio and config port are slaves, but the dma port is a master.
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-10-09Interrupts: Make the IO APIC go get the local APICs.Gabe Black
This is so they don't have to declare themselves to the IO APIC and don't have to have a pointer to the platform object.
2011-09-30SE/FS: Remove System::platform and Platform::intrFrequency.Gabe Black
In order for a system object to work in SE mode and FS mode, it has to either always require a platform object even in SE mode, or get rid of the requirement all together. Making SE mode carry around unnecessary/unused bits of FS seems less than ideal, so I decided to go with the second option. The platform pointer in the System class was used for exactly one purpose, a path for the Alpha Linux system object to get to the real time clock and read its frequency so that it could short cut the loops_per_jiffy calculation. There was also a copy and pasted implementation in MIPS, but since it was only there because it was there in Alpha I still count that as one use. This change reverses the mechanism that communicates the RTC frequency so that the Tsunami platform object pushes it up to the AlphaSystem object. This is slightly less specific than it could be because really only the AlphaLinuxSystem uses it. Because the intrFrequency function on the Platform class was no longer necessary (and unimplemented on anything but Alpha) it was eliminated. After this change, a platform will need to have a system, but a system won't have to have a platform.
2011-09-30SE/FS: Build the devices in SE mode.Gabe Black
2011-06-02scons: rename TraceFlags to DebugFlagsNathan Binkert
2011-05-23config: revamp x86 config to avoid appending to SimObjectVectorsSteve Reinhardt
A significant contributor to the need for adoptOrphanParams() is the practice of appending to SimObjectVectors which have already been assigned as children. This practice sidesteps the assignment operation for those appended SimObjects, which is where parent/child relationships are typically established. This patch reworks the config scripts that use append() on SimObjectVectors, which all happen to be in the x86 system configuration. At some point in the future, I hope to make SimObjectVectors immutable (by deriving from tuple rather than list), at which time this patch will be necessary for correct operation. For now, it just avoids some of the warning messages that get printed in adoptOrphanParams().
2011-04-15trace: reimplement the DTRACE function so it doesn't use a vectorNathan Binkert
At the same time, rename the trace flags to debug flags since they have broader usage than simply tracing. This means that --trace-flags is now --debug-flags and --trace-help is now --debug-help
2011-04-15includes: sort all includesNathan Binkert
2011-02-06dev: fixed bugs to extend interrupt capability beyond 15 coresBrad Beckmann
2011-02-06x86: Add checkpointing capability to devicesJoel Hestness
Add checkpointing capability to the Intel 8254 timer, CMOS, I8042, PS2 Keyboard and Mouse, I82094AA, I8237, I8254, I8259, and speaker devices
2011-02-06MessagePort: implement the virtual recvTiming function to avoid double pkt ↵Joel Hestness
delete Double packet delete problem is due to an interrupt device deleting a packet that the SimpleTimingPort also deletes. Since MessagePort descends from SimpleTimingPort, simply reimplement the failing code from SimpleTimingPort: recvTiming.
2011-01-03Make commenting on close namespace brackets consistent.Steve Reinhardt
Ran all the source files through 'perl -pi' with this script: s|\s*(};?\s*)?/\*\s*(end\s*)?namespace\s*(\S+)\s*\*/(\s*})?|} // namespace $3|; s|\s*};?\s*//\s*(end\s*)?namespace\s*(\S+)\s*|} // namespace $2\n|; s|\s*};?\s*//\s*(\S+)\s*namespace\s*|} // namespace $1\n|; Also did a little manual editing on some of the arch/*/isa_traits.hh files and src/SConscript.
2010-12-20Style: Replace some tabs with spaces.Gabe Black
2010-08-17bus: clean up default responder code.Steve Reinhardt
Clean up some minor things left over from the default responder change in rev 9af6fb59752f. Mostly renaming the 'responder_set' param to 'use_default_range' to actually reflect what it does... old name wasn't that descriptive in the first place, but now it really doesn't make sense at all. Also got rid of the bogus obsolete assignment to 'bus.responder' which used to be a parameter but now is interpreted as an implicit child assignment, and which was giving me problems in the config restructuring to come. (A good argument for not allowing implicit child assignments, IMO, but that's water under the bridge, I'm afraid.) Also moved the Bus constructor to the .cc file since that's where it should have been all along.
2009-12-19X86: Add a latency that describes how long an interrupt takes to propagate ↵Gabe Black
through the IO APIC.
2009-11-04build: fix compile problems pointed out by gcc 4.4Nathan Binkert
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-08-17X86: Move the simulated date in X86_FS forward to 2012.Gabe Black
2009-08-02X86: Set up the IDE device correctly, ie. with and using legacy ports.Gabe Black
2009-05-17includes: sort includes againNathan Binkert
2009-04-26X86: Implement lowest priority interrupts more correctly.Gabe Black
Lowest priority interrupts are now delivered based on a rotating offset into the list of potential recipients. There could be parasitic cases were a processor gets picked on and ends up at that rotating offset all the time, but it's much more likely that the group will stay consistent and the pain will be distributed evenly.
2009-04-26X86: Tell the function that sends int messages who to send to instead of ↵Gabe Black
figuring it out itself.
2009-04-26X86: Make the local APICs register themselves with the IO APIC.Gabe Black
This is a hack so that the IO APIC can figure out information about the local APICs. The local APICs still have no way to find out about each other. Ideally, when the local APICs update state that's relevant to somebody else, they'd send an update to everyone. Without being able to do a broadcast, that would still require knowing who else there is to notify. Other broadcasts are implemented using assumptions that may not always be true.
2009-04-26X86: Record the initial APIC ID which identifies an APIC in M5.Gabe Black
The ID as exposed to software can be changed. Tracking those changes in M5 would be cumbersome, especially since there's no guarantee the IDs will remain unique.
2009-04-26X86, Config: Make makeX86System consider the number of CPUs, and clean up ↵Gabe Black
interrupt assignment.
2009-04-19X86: Mask the PIC at startup to avoid a glitch which causes an NMI.Gabe Black
2009-04-19X86: Add a function which gets called when an interrupt message has been ↵Gabe Black
delivered.
2009-04-19X86: Make code that sends an interrupt from the IO APIC available for IPIs.Gabe Black
2009-02-25X86: Add makeAtomicResponse to the read/write functions of x86 devices.Gabe Black
2009-02-01X86: Add some missing default arguments.Gabe Black
2009-02-01X86: Implement pciToDma.Gabe Black
2009-02-01X86: Configure the first PCI interrupt.Gabe Black
2009-02-01X86: Hook up the IDE controller interrupt line.Gabe Black
2009-02-01Devices: Add support for legacy fixed IO locations in BARs.Gabe Black
2009-02-01X86: Plug in an IDE controller.Gabe Black