Age | Commit message (Collapse) | Author |
|
Add a new VExpress_GEM5_V1_Base Platform which configures basic on
chip devices. The original VExpress_GEM5_V1 will inherit the Base and
add more on chip devices (currently only the HDLCD). This change will
make it possible to create variations of the base platform with
different devices.
Change-Id: I21f9bf4f6217d87e811ff777f630122593eef013
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10807
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Change-Id: I4c5203b216387d9a4f041c7a00caea926e5cfca6
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10810
|
|
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Add an ARM-specific VirtIO MMIO device to the VExpress_GEM5_V1
platform.
Change-Id: Id1e75398e039aad9d637f46f653cda9084d3d2fe
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2327
|
|
The MMIO interface currently only supports a subset of version 0.9.5
of the VirtIO specification. It has the following known limitations:
* The queue size hint (the QUEUE_NUM register) is ignored.
* Queue alignment is assumed to be hard-coded to
VirtQueue::ALIGN_SIZE (4096 bytes).
* Only 4096 byte pages are currently supported.
Change-Id: Ifd318f5e5bddab0b6a42d8c8af9ff2fbb477f98b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Add GIC-based interrupt adaptor implementations that support PPI
(ArmPPI) and SPI (ArmSPI) delivery. In addition to being useful for
"normal" memory-mapped devices, the PPI adaptor makes it possible to
use the same device model to generate both PPIs and SPIs (e.g., the
PMU).
Change-Id: I73d6591c168040faef2443430c4f1da10c387a2a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2521
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
Change-Id: I1a4849283f9bd5b1856e1378f7cefc33fc14eebd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10023
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
When running gem5, the simulator outputs the following message to
describe the ports used by the VNC server and ther terminal:
Listening for system connection on port 5900
Listening for system connection on port 3456
The code used to extract the basename ('terminal' or 'vncserver') and
print that instead of system. However, this doesn't seem to work any
more. Change the code to output the full object name instead.
Change-Id: Ib27f66a5f8ba64c7a875b4e2f26a2e2ff48db8f3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10026
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Add a simple memory-mapped device that forwards writes to a serial
devices and treats reads as reads from the device. Unlike real UART
models, this one doesn't support interrupts.
This is useful to implement various debug devices that exist in many
systems.
Change-Id: I1e4300e4d3b70825a15d03f47d4e026941f9066c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10025
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Add support for TX interrupts and cleanup existing RX interrupt
handling.
Change-Id: If2e5b0c0cc6fbeb2dce09e7e9d935647516b2c47
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9769
|
|
Move ps2.hh to dev/ps2/types.hh and update the device models to
consistently use well-known constants from this header.
Change-Id: Iadfdc774495957beb82f3d341107b1e9232ffd4c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9770
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The Pl050 KMI model currently has its own keyboard and mouse
models. Use the generic PS/2 interface instead.
Change-Id: I6523d26f8e38bcc8ba399d4d1a131723645d36c7
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9767
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The touchscreen model used ad-hoc mechanisms to enable/disable the
device. Use standard PS/2 commands to activate/deactivate the
device. Add proper TouchKit command handling.
Change-Id: I0c5a2e2b47639f36ab3ee07e3e559f11afa54b9d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9768
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Linux tries to reset the PS/2 keyboard at boot.
Change-Id: I727fbf6138b654885d82d85be9d964ee3d3365ef
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9766
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
All PS/2 device currently implement various ad-hoc mechanisms to
handle multi-byte commands. This is error-prone and makes it hard to
implement new devices. Create a buffering mechanism in the base class
to avoid this.
Change-Id: If5638b0ab68decea8de7631ecead0a9ebad1547b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9765
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Add a touchscreen model that is compatible with Linux's TouchKit
driver. This model is based on the model in the Arm PL050 KMI model.
Change-Id: Id4d88a21a26bb42c455e4d778cd89875f650ac57
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9764
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Add support for keyboard input from the VNC server in the PS/2
keyboard model. The introduced code is based on the functionality in
the Arm PL050 KMI model.
Change-Id: If04a9713e5a15e2149d1a7471b999e3060d8ee7d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9763
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
PS/2 devices are currently emulated both in the i8042 model and the
Arm KMI model. This is undesirable since it leads to code duplication.
This change introduces a common PS/2 device interface and factor out
the x86 keyboard and mouse model. A subsequent commit will implement
support for this interface in the Arm KMI model.
Change-Id: I440e83517fd9dce362fdc1676db477cc6eee5211
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9762
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These are single byte commands which change the mode of the mouse. They don't
take any additional parameters like the SetRate or SetResolution.
Change-Id: I29194916cfed5d3f4893947ef6d6cc636aee2419
Reviewed-on: https://gem5-review.googlesource.com/9701
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The EtherTap device may be called into from an event on the PollQueue when
some event queue other than its own is active. This change ensures that it
switches event queues if necessary before doing anything that may cause more
events to be scheduled.
Change-Id: If8666542d7664780c0b371230e1e5fba93fbc1c0
Reviewed-on: https://gem5-review.googlesource.com/9521
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
It's not used, and so doesn't need to be brought in with a "using"
statement.
Change-Id: Iff4f7c66dbf1ee18e2e1a7d3e73bbae8cc4bf8eb
Reviewed-on: https://gem5-review.googlesource.com/9406
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
There was a bunch of commented out code in the MIPS malta
implementation which originally came from Alpha. That code is now
deleted. Also, the MIPS code pulled in the TheISA namespace which it
didn't use.
Change-Id: I8470cc2fecb302f4399e52de4de9daf79c00a711
Reviewed-on: https://gem5-review.googlesource.com/9405
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
If the switch block inside the RFDR case selects the non-default case
and breaks out, it will fall through into the BRAR case, which seems
incorrect. Put in a break to ensure that it breaks out of the parent
switch block as well.
Change-Id: Ie4cedf66954b7e8f4b884ad9e3a653968bbfaef7
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/8563
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The length of the strncpy should be one less than the destination to
ensure that there is space for the last NULL byte in case the source
is longer than the destination.
Change-Id: Iea65fa6327c8242bd8ddf4bf9a5a2b5164996495
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/8561
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Proposed changes to SPARC FS simulation, testing indicates that checkpoints are now loaded correctly with the following command: build/SPARC/gem5.opt configs/example/fs.py -r 1
Change-Id: Icd44f01a74c41a78828ef6fd7b661e584bdb6966
Reviewed-on: https://gem5-review.googlesource.com/8581
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: I412d0b5edf2a08217792fa2ed1e511c17d3d31d4
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8141
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The patch that added M5_FALLTHROUGH (5c41076bd7610 misc: Updates for gcc7.2
for x86) incorrectly added breaks to the i8042 device without implementing
the correct functions. This patch implements keyboard writes, but ignores
output writes.
Information on the PS2 controller can be found at
https://wiki.osdev.org/%228042%22_PS/2_Controller
Note: Without this patch Linux 4.14 won't boot.
Change-Id: I7de137b46cef00e6c1f1c14335cb52107cd7fe5b
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/7301
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Enables automatic generation of Device Trees for RealView PCI host
controllers. Note that some parts are more hard coded than you'd want,
but this is due to the limited understanding the PCI host has of its
configuration (i.e. it doesn't know all memory ranges). Fixing this,
for now at least, went beyond the scope and intentions of the
Device Tree generating code: use with care!
Change-Id: I2041871e0eb4d04fb5191257c47dd38649d1c0cc
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5967
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Adds Device Tree methods for the energy controller to allow for
DVFS simulations with automatically generated DTB files
Change-Id: Id8682f07dff1bbe63987e757faa0694e03ee86ab
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5966
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Implements the Device Tree generating code for devices required by the
RealView VExpress_GEM5_V1 platform
Change-Id: I14244b2f3c028cbddba3c23ce7433fe3b301a0e8
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5965
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Equips cpu models with a method to generate the cpu node.
Note: even though official documentation requires that CPU ids start
counting from 0 in every cluster, GEM5 requires a globally unique cpu_id.
Change-Id: Ida3e17af3124a68ef7dbf2449cd034dfc3ec39df
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5963
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Within a device tree, the GenericTimer device needs to point (via phandle)
to a clock domain which is itself also an object in the device tree. Within
gem5, clock domains are managed by making all clocked SimObjects inherit
from ClockedObject rather than SimObject.
Without this change, the GenericTimer is unable to generate the appropriate
clock domain phandle, and will crash during DTB autogeneration.
Change-Id: I6d3fb6362847c6a01720b2f14b3d595d1e59f01f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4960
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
They are now oriented around a class which makes it easy to provide
custom setter/getter functions which let you set or read bits in an
arbitrary way.
Future additions may add the ability to add custom bitfield methods,
and index-able bitfields.
Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333
Reviewed-on: https://gem5-review.googlesource.com/7201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Several files in the repository were tracked with execute permissions
even though the files are just normal C/C++ files (and the one .isa).
Change-Id: I976b096acab4a1fc74c5699ef1f9b222c1e635c2
Reviewed-on: https://gem5-review.googlesource.com/7241
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
A recent serial device refactoring changed the name of the parameter
that the terminal device gets attached to on the UART. The x86 and
SPARC platform devices didn't get updated though, and were still using
the old name. This change updates those objects.
Reported-by: Kanad Basu <kanad.kut@gmail.com>
Change-Id: I0824a9df8639062d8561420ea9ffea26b8b7e2e9
Reviewed-on: https://gem5-review.googlesource.com/5781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Add a dummy serial device that discards any output and doesn't provide
any input. This device can be used to terminate UARTs that don't have
a default device (e.g., a terminal) attached.
Change-Id: I4a6b0b5037ce360f59bfb5c566e1698d113a1d26
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4290
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.
Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device. Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.
Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Originally it was possible to use a Bitmap writer class for dumping a
framebuffer snapshot in a .bmp file. This patch enables you to choose
another format. In particular it implements the writing of PNG Images
using libpng library. The latter has to be already installed in your
machine, otherwise gem5 will default to the Bitmap format. This
configurable writer has been introduced in the VNC frame dumping mechanism,
which is storing changed frame buffers from the VNC server
Change-Id: Id7e5763c82235f1ce90381c8486b85a7cce734ce
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5181
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Only panic if there are disks which would actually be connected to it beyond
its limit. Also skip past disks which are set to NULL. This is useful since
it lets you set up disks on different ports of the controller instead of
filling them contiguously.
Change-Id: I92f1316d3ad6931e25bfffeb34fb2603c0b95ce7
Reviewed-on: https://gem5-review.googlesource.com/4848
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
* When dispatching multiple gem5 simulations at once, they race
for the socket id, resulting in a panic when calling 'bind'. To
avoid this problem, the socket id is now created before the diod
process is created. In case of a race, a panic is called in the
gem5 process, whereas before the panic was called in the diod
process where it didn't have any effect.
* In some cases killing the diod process in terminateDiod() using
only SIGTERM failed, so a call using SIGKILL is added.
Change-Id: Ie10741e10af52c8d255210cd4bfe0e5d761485d3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2821
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The error message says an IDE controller can support at most 4 disks, but the
check would fail if there were more than 3 disks.
Change-Id: Ic7d5d8c941fe2580da43019f53991377d4727bb9
Reviewed-on: https://gem5-review.googlesource.com/4460
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
ISA devices typically run in the device event queue. Previously, we
assumed that devices would perform their own EQ migrations as
needed. This isn't ideal since it means we have different conventions
for IO devices and ISA devices. Switch to doing migrations in the KVM
CPU instead to make the behavior consistent.
Change-Id: I33b74480fb2126b0786dbdbfdcfa86083384250c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4288
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Ic59add8afee1d49633634272d9687a4b1558537e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3929
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|