| Age | Commit message (Collapse) | Author |
|---|
|
The bootloader arguments were previously defaulting to a predetermined
value even if initialized elsewhere in the platform config script.
This commit fixes this issue by not calling the default initialization
routine if the bootloader is already defined.
Change-Id: Id80af4762b52dc036da29430b2795bb30970a349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3967
|
|
OnIdle() is never called since DMA active check is completely
opposite to what it should be. old active status should be 'true'
and new active status should be false for OnIdle to be called
Change-Id: I94eca50edbe96113190837c7f6e50a0d061158a6
Reported-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3966
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
|
|
With the change we explicitly update the types for the VirtIO bit
masks to be Addr (uint64_t). By changing this, we ensure type
promotion where it is needed. Therefore, this fixes issues where, in
certain situations, address calculations were performed in 32-bits,
resulting in overflows.
Change-Id: I5c5c3f9a3f94e806812282da01268e18ae0d2d39
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3968
|
|
If an interrupt was pending according to Kvm state during a drain,
the Pl390 model would create an interrupt event that could not be
serviced, preventing the system from draining. The proper behavior
is for the Pl390 not actively being used for simulation to just skip
the GIC state machine that delivers interrupts.
Change-Id: Icb37e7e992f1fb441a9b3a26daa1bb5a6fe19228
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The timer device exposed via the ARM ISA, also known as the
"CP15 timer" due to its legacy coprocessor encodings, is
implemented by the GenericTimerISA class. During Kvm
execution, however, this functionality is directly emulated
by the hardware.
This commit subclasses the GenericTimer, which is (solely)
used by GenericTimerISA, to facilitate Kvm in much the same
way as the prior GIC changes: the gem5 model is used as the
backing store for state, so checkpointing and CPU switching
work correctly, but isn't used during Kvm execution.
The added indirection prevents the timer device from creating
events when we're just updating its state, but not actually
using it for simulation.
Change-Id: I427540d11ccf049c334afe318f575146aa888672
Reviewed-on: https://gem5-review.googlesource.com/3542
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Having timer events stored in checkpoints complicates Kvm
execution. We change the timer behavior so that it always
deschedules any pending events on a drain() and recreates
them on a drainResume(), thus they will never appear in
checkpoints henceforth. This pattern of behavior makes
it simpler to handle Kvm execution, where the hardware
performs the timer function directly.
Change-Id: Ia218868c69350d96e923c640634d492b5c19cd3f
Reviewed-on: https://gem5-review.googlesource.com/3541
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I3395e64311f6aa7bbfb6eee9bfec82e832bcbd4d
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3901
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I864b5d9ed655cc52e440e2eb54987e8ff9a73296
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3900
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I6b03cc6f67e76dffb79940431711ae6171901c6a
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3748
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I08de5f72513645d1fe92bde99fa205dde897e951
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3747
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I953521572e6ace475b656369c9f07ddfa50d731a
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3263
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I6d8a5e3795291b2a4cce022f555cf4b04f997538
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3262
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This commit adds support for diod to use a unix socket, rather
than a TCP port. We don't rely on the IP-based connection as we
directly use pipes to interact with diod. This allows it to work
on any system, even if the specific port is taken by another diod
instance (or similar). Secondly, the Unix socket could in theory
be used to debug. However, this functionality has not been
tested.
Change-Id: I616e0ad8768da1dfc867de3af98cdfbb22a72d63
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2820
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Iac3d15719b2bbc426020a27d6b47a4baaab078c7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2907
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When it comes time to send a packet with the i8254xGBe model hooked up to
EtherTap and while running in KVM mode, the packet will first go to the
EtherTap over the network style port between them. EtherTap, because it's
not actually a model of anything in the simulation, will immediately pass
the packet off to the real network and report that the transmission was
successful to the i8254xGBe. The i8254xGBe will notice that it still has
stuff it can send (the KVM mode CPU has no trouble keeping it full) and
will, without returning and collapsing the stack, immediately call back
into EtherTap with the next packet. This loop repeats, continually
deepening the stack, until gem5 crashes with a segfault.
To break this loop, a few small changes have been made. First, txFifoTick
has been repurposed slightly so that it continuously keeps track of
whether there's still work to do to flush out the fifo during the current
tick. The code in txWire has been adjusted slightly so that it clears that
variable at the start (also removing some redundancy), so that other code
can set it again if more work needs to be done. Specifically, the
ethTxDone function will set that flag.
If there's more work to be done flushing the Fifo while in tick(), it
will loop until txFifoTick stays cleared, meaning either the Fifo is
empty, or the object on the other end hasn't said it's done yet.
Finally, a new bool member called inTick has been added which keeps track
of whether the tick() function is still active somewhere in the callstack.
If it is, then the tick event shouldn't be rescheduled in ethTxDone, since
tick will take care of that before it returns. It won't check to see if it
needs to, and so without this check there's a panic from scheduling the
same event twice.
It's not completely clear that the Fifo should send packets over and over
as fast as the other side accepts them within the same tick, although it's
not clear that it shouldn't either. If not, then probably all that would
need to change would be to remove the "while" loop so that the tick event
would be rescheduled, and the Fifo would be further emptied the next time
around.
Change-Id: I653379b43389d0539ecfadb3fc6c40e38a8864c2
Reviewed-on: https://gem5-review.googlesource.com/3642
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Fix load_addr_mask in VExpress_GEM5_V1 in order to boot with the 64-bit
kernel.
Change-Id: I13a0a752c60e53262a245cb24b16606071041397
Reviewed-on: https://gem5-review.googlesource.com/3643
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The object is called EtherTap (as opposed to EtherTapStub, what the former
EtherTap was renamed to), and its existance is gated on the linux/if_tun.h
header file existing. That's probably overly strict, but it will hopefully
be minimally likely to break the build for other systems.
Change-Id: Ie03507fadf0d843a4d4d52f283c44a416c6f2a74
Reviewed-on: https://gem5-review.googlesource.com/3646
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
A lot of the implementation of EtherTapStub can be shared with a version
which uses a tap device directly. This change factors out those parts to
accommodate that.
Change-Id: I9c2e31f1be139ca73859a83f05457cef90101006
Reviewed-on: https://gem5-review.googlesource.com/3645
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
The EtherTap object is going to be reworked so that it connects to a tap
device directly, but it's worthwhile to still be able to use the m5tap
utility (util/tap) to send/receive packets on systems which don't support
tap but do support the pcap API. It can also be used to replay ethernet
frames, to capture the ethernet frames coming from gem5 for analysis, to
programmatically consume and/or generate the frames, or even to forward
them to/from a remote system.
Change-Id: Ic7bd763d86cd913ac373dd10a8d6d1fc6b35f95a
Reviewed-on: https://gem5-review.googlesource.com/3644
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
There needs to be a SlavePort called "tap" for the ethertap device to be
able to connect to the gem5 network successfully.
Change-Id: I1ad81219f612fd1ec278c6148af728d20bc916da
Reviewed-on: https://gem5-review.googlesource.com/3580
Reviewed-by: Nathan Binkert <nate@binkert.org>
Maintainer: Nathan Binkert <nate@binkert.org>
|
|
Change-Id: I31808b6d7ca2bc2af41deaec747e3a13bd4f77d2
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3261
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
We don't implement the GICD_IGROUPRn registers, which is allowed, but
to be correct, they should be RAZ/WI (read as zero, writes ignored).
Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part
of the CS5 address range in the RS1/RS2 memory map.
Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2965
|
|
Remove SWIG guards and SWIG-specific C++ code.
Change-Id: Icaad6720513b6f48153727ef3f70e0dba0df4bee
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2921
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
|
|
Add a case for the ATA command ATAPI_IDENTIFY_DEVICE.
This avoids the panic: Unsupported ATA command when booting a recent Linux
kernel. This was tested on 4.8.13.
Change-Id: Ib297a2c02da0730d8698c59801254dd0f5ee9f7f
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/2863
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
This also allows checkpointing of a Kvm GIC via the Pl390 model.
Change-Id: Ic85d81cfefad630617491b732398f5e6a5f34c0b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2444
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
|
The Binary Point Register (BPR) specifies which bits belong to the
group priority field (which are used for preemption) and which to the
subpriority field (which are ignored for preemption).
Change-Id: If51e669d23b49047b69b82ab363dd01a936cc93b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2443
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
|
The aforementioned registers (Interrupt Processor Targets Registers) are
banked per-CPU, but are read-only. This patch eliminates the per-CPU
storage of these values that are simply computed.
Change-Id: I52cafc2f58e87dd54239a71326c01f4923544689
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2442
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
|
Change-Id: I696703418506522ba90df5c2c4ca45c95a6efbea
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2441
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
|
The generic timer sometimes needs to access global state. This can
lead to race conditions when simulating a multi-core KVM system where
each core lives in its own thread. In that case, the setMiscReg and
readMiscReg methods are called from the thread owning the CPU and not
the global device thread.
Change-Id: Ie3e982258648c8562cce0b30a0c122dfbfaf42cd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2460
Reviewed-by: Weiping Liao <weipingliao@google.com>
|
|
When setting the size of a PCI BAR, the kernel only supports powers of
two (as per the PCI spec). Previously, the size was incorrectly read
by the kernel, and the address ranges assigned to the PCI devices
could overlap, resulting in gem5 crashes. We now round up to the next
power of two.
Kudos to Sergei Trofimov who helped to debug this issue!
Change-Id: I54ca399b62ea07c09d4cd989b17dfa670e841bbe
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Sergei Trofimov <sergei.trofimov@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2580
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
|
|
VirtIO transport interfaces always expect a VirtIO device
pointer. However, there are cases (in particular when using VirtIO's
MMIO interface) where we want to instantiate an interface without a
device. Add a dummy device using VirtIO device ID 0 and no queues to
handle this use case.
Change-Id: I6cbe12fd403903ef585be40279c3b1321fde48ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2325
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Rename VIOPci -> VIOIface to avoid having a separate flag for the MMIO
interface.
Change-Id: I99f9210fa36ce33662c48537fd3992cd9a69d349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2324
Reviewed-by: Weiping Liao <weipingliao@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I4c0de7c2a5b40c1a9f009ca12062cb108b450b04
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The Pl390::getAddrRanges() method should have been flagged using the
override keyword. Other methods in this class already use the override
keyword, so this results in a warning about inconsistent override
usage when compiling using clang.
Change-Id: I17449687a8e074262232562487b58c96466bd54e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The GIC model currently adds a delay to interrupts when posting them
to a target CPU. This means that an interrupt signal will be
represented by an event for a short period of time. We currently
ignore this when draining and serialize the tick when the interrupt
will fire. Upon loading the checkpoint, the simulated GIC reschedules
the pending events. This behaviour is undesirable when we implement
support for switching between in-kernel GIC emulation and gem5 GIC
emulation. In that case, the (kernel) GIC model gets a lot simpler if
we don't need to worry about in-flight interrupts from the gem5 GIC.
This changeset adds a draining check to force the GIC into a state
where all interrupts have been delivered prior to checkpointing/CPU
switching. It also removes the now redundant serialization of
interrupt events.
Change-Id: I8b8b080aa291ca029a3a7bdd1777f1fcd5b01179
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2331
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Lots of minor cleaups:
* Make cached params const
* Don't serialize params
* Use AddrRange to represent the distributor and CPU address spaces
* Store a const AddrRangeList of all PIO ranges
Change-Id: I40a17bc3a38868fb3b8af247790e852cf99ddf1d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2330
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Use the new fast scan-out API in the PixelPump to render frames at a
fixed frame rate in KVM mode. The refresh rate when running in KVM can
be controlled by the virt_refresh_rate parameter.
Change-Id: Ib3c78f174e3f8f4ca8a9b723c4e5d311a433b8aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2242
Reviewed-by: Rahul Thakur <rjthakur@google.com>
|
|
Add a helper function to scan out an entire frame in one time
step. This requires the public PixelPump to be changed somewhat to
separate timing updates from general PixelPump control. Instead of
calling PixelPump::start(timings), timings now need to be updated
using a separate call to PixelPump::updateTimings(timings) before
calling PixelPump::start().
Display controllers that don't need accurate timing (e.g., in KVM
mode), can use the new PixelPump::renderFrame() API to render an
entire frame in one step. This call results in the same callbacks
(e.g., calls to nextPixel()) as the timing calls, but they all happen
in immediately. Unlike the timing counterpart, renderFrame() doesn't
support buffer underruns and will panic if nextPixle() indicates an
underrun.
Change-Id: I76c84db04249b02d4207c5281d82aa693d0881be
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2241
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Use a fast, functional, read operations keep the DMA FIFO full when
running in KVM mode.
Change-Id: I5b378c2fb6a1d3e687cef15e807e63a0a53a60e2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2226
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Added functionality to check and clear interrupts for KMI
devices. This fixes a boot bug when using KVM and in-kernel GIC
emulation.
Change-Id: Ia3e91d07567b7faf3f82b0adfda4a165a502a339
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2225
Reviewed-by: Rahul Thakur <rjthakur@google.com>
|
|
Automatically use the MuxingKvmGic in the VExpress_GEM5_V1
platform. This removes the need to patch the host kernel or the
platform configuration when using KVM on ARM.
Change-Id: Ib1ed9b3b849b80c449ef1b62b83748f3f54ada26
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
Change-Id: Ifc65d42eebfd109c1c622c82c3c3b3e523819e85
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
There are drivers writing to WUFC uncondtionally of anything. In order to
not panic gem5 in these cases, ignore writes to WUFC and WUS as we do for
WUC. Similarly return 0 (default reset value) on reads.
Testing Done: Booted in FS with such a driver revision which would
previously panic and now boots fine.
Reviewed at http://reviews.gem5.org/r/3791/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.
|
|
|
|
Builds for the NULL ISA include Device.py, which contains the Python
declaration of DmaDevice, but don't include the actual C++
implementation. Add dma_device.cc to the NULL build to the Python and
C++ worlds consistent again.
Change-Id: I47a57181a1f4d5a7276467678bf16fbc7f161681
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
|
|
The header declared in the DmaDevice wrapper doesn't actually contain
the DmaDevice class. This can potentially lead to incorrect type cases
in Swig.
Change-Id: If2266d4180d1d6fd13359a81067068854c5e96fe
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
|
|
Two problems may arise when a distributed gem5 simulation terminates:
(i) simulation thread(s) may get stuck in an incomplete synchronisation
event which prohibits processing the simulation exit event; and (ii) a
stale receiver thread may try to access objects that have already been
deleted while exiting gem5. This patch terminates receive threads properly
and aborts the processing of any incomplete synchronisation event.
Change-Id: I72337aa12c7926cece00309640d478b61e55a429
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Changeset 11701 only serialized the useful portion of of an ethernet packets'
payload. However, the device models expect each ethernet packet to contain
a 16KB buffer, even if there is no data in it. This patch adds a 'bufLength'
field to EthPacketData so the original size of the packet buffer can always
be unserialized.
Reported-by: Gabor Dozsa <Gabor.Dozsa@arm.com>
|
