summaryrefslogtreecommitdiff
path: root/src/dev
AgeCommit message (Collapse)Author
2012-03-01ARM: FIx missing cf controller connection.Ali Saidi
2012-03-01ARM: Add support for Versatile Express extended memory mapAli Saidi
Also clean up how we create boot loader memory a bit.
2012-03-01ARM: Add RTC device for ARM platforms.Ali Saidi
This change implements a PL031 real time clock. --HG-- rename : src/dev/arm/timer_sp804.cc => src/dev/arm/rtc_pl031.cc rename : src/dev/arm/timer_sp804.hh => src/dev/arm/rtc_pl031.hh
2012-02-24MEM: Prepare mport for master/slave splitAndreas Hansson
This patch simplifies the mport in preparation for a split into a master and slave role for the message ports. In particular, sendMessageAtomic was only used in a single location and similarly so sendMessageTiming. The affected interrupt device is updated accordingly.
2012-02-24MEM: Move all read/write blob functions from Port to PortProxyAndreas Hansson
This patch moves the readBlob/writeBlob/memsetBlob from the Port class to the PortProxy class, thus making a clear separation of the basic port functionality (recv/send functional/atomic/timing), and the higher-level functional accessors available on the port proxies. There are only a few places in the code base where the blob functions were used on ports, and they are all for peeking into the memory system without making a normal memory access (in the memtest, and the malta and tsunami pchip). The memtest also exemplifies how easy it is to create a non-translating proxy if desired. The malta and tsunami pchip used a slave port to perform a functional read, and this is now changed to rely on the physProxy of the system (to which they already have a pointer).
2012-02-24MEM: Make port proxies use references rather than pointersAndreas Hansson
This patch is adding a clearer design intent to all objects that would not be complete without a port proxy by making the proxies members rathen than dynamically allocated. In essence, if NULL would not be a valid value for the proxy, then we avoid using a pointer to make this clear. The same approach is used for the methods using these proxies, such as loadSections, that now use references rather than pointers to better reflect the fact that NULL would not be an acceptable value (in fact the code would break and that is how this patch started out). Overall the concept of "using a reference to express unconditional composition where a NULL pointer is never valid" could be done on a much broader scale throughout the code base, but for now it is only done in the locations affected by the proxies.
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.
2012-02-14MEM: Fix residual bus ports and make them master/slaveAndreas Hansson
This patch cleans up a number of remaining uses of bus.port which is now split into bus.master and bus.slave. The only non-trivial change is the memtest where the level building now has to be aware of the role of the ports used in the previous level.
2012-02-13MEM: Explicit ports and Python binding on CopyEngineAndreas Hansson
The copy-engine ports were previously created implicitly and bound based on the dma port peer rather than relying on the normal Python binding (connectPorts) being called explicitly. This patch makes the copy engine port similar to all other ports in that they are visibly in the Python class and bound using the normal explicit calls through Python.
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-12mem: Add a master ID to each request object.Ali Saidi
This change adds a master id to each request object which can be used identify every device in the system that is capable of issuing a request. This is part of the way to removing the numCpus+1 stats in the cache and replacing them with the master ids. This is one of a series of changes that make way for the stats output to be changed to python.
2012-02-01configs: More fixes for the memory system updatesAli Saidi
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-29Implement Ali's review feedback.Gabe Black
Try to decrease indentation, and remove some redundant FullSystem checks.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-27ns_gige: Fix a missing curly brace in if-statementAndreas Hansson
This patch adds a missing curly brace when clearing and setting the appropriate bits in the ns_gige.cc code. This commit is not based on any runtime bug experienced, but rather inspection of the code.
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-17MEM: Removing the default port peer from Python portsAndreas Hansson
In preparation for the introduction of Master and Slave ports, this patch removes the default port parameter in the Python port and thus forces the argument list of the Port to contain only the description. The drawback at this point is that the config port and dma port of PCI and DMA devices have to be connected explicitly. This is key for future diversification as the pio and config port are slaves, but the dma port is a master.
2012-01-17MEM: Make the bus bridge unidirectional and fixed address rangeAndreas Hansson
This patch makes the bus bridge uni-directional and specialises the bus ports to be a master port and a slave port. This greatly simplifies the assumptions on both sides as either port only has to deal with requests or responses. The following patches introduce the notion of master and slave ports, and would not be possible without this split of responsibilities. In making the bridge unidirectional, the address range mechanism of the bridge is also changed. For the cases where communication is taking place both ways, an additional bridge is needed. This causes issues with the existing mechanism, as the busses cannot determine when to stop iterating the address updates from the two bridges. To avoid this issue, and also greatly simplify the specification, the bridge now has a fixed set of address ranges, specified at creation time.
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-17MEM: Simplify ports by removing EventManagerAndreas Hansson
This patch removes the inheritance of EventManager from the ports and moves all responsibility for event queues to the owner. Eventually the event manager should be the interface block, which could either be the structural owner or a subblock like a LSQ in the O3 CPU for example.
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-10DPRINTF: Improve some dprintf messages.Nilay Vaish
2012-01-09ARM: Add support for running multiple systemsAli Saidi
2012-01-07Another merge with the main repository.Gabe Black
2012-01-07Merge with the main repository again.Gabe Black
2012-01-07Merge with main repository.Gabe Black
2011-12-15IO: Fix bug in DMA Device where receiving a snoop on DMA port would cause a ↵Ali Saidi
panic. --HG-- extra : rebase_source : 8152d4fa7d7354c9f150a450ae0710e95141ba4b
2011-12-13gcc: fix unused variable warnings from GCC 4.6.1Nathan Binkert
--HG-- extra : rebase_source : f9e22de341493a25ac6106c16ac35c61c128a080
2011-12-01Output: Add hierarchical output support and cleanup existing codebase.Chris Emmons
--HG-- extra : rebase_source : 3301137733cdf5fdb471d56ef7990e7a3a865442
2011-12-01Device: Make changes necessary to support a coherent page walker cache.Mitchell Hayenga
Adds the flag 'recvSnoops' which enables pagewalkers using DmaPorts, to properly configure snoops. --HG-- extra : rebase_source : 64207bef62c3268ddff2236ee4adae873812325f
2011-11-28SPARC: Fixing a minor copy-paste bug using the wrong variableAndreas Hansson
There was a bug in the mm_disk implementation where a copy paste error resulted in the d32 variable not being initialised (as it incorrectly was used instead of d16), and gcc 4.5 complaining. --HG-- extra : rebase_source : 9515e87b188b9eac189da8034cb13c3bf7d9e20b
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-11-13SE/FS: Get rid of FULL_SYSTEM in dev.Gabe Black
2011-10-30SE/FS: Get rid of FULL_SYSTEM in MIPS.Gabe Black
2011-10-20dev: clean up PioDevice and DmaDevive getPort() methods.Steve Reinhardt
Make DmaDevice::getPort() call PioDevice::getPort() instead of just copying and pasting the code. Also move definitions from .hh to .cc file.
2011-10-10mc146818: Correctly serialize tickEventNilay Vaish
'tickEvent' was not being serialized as in its place 'event' was being used. This patch rectifies this error.
2011-10-09Interrupts: Make the IO APIC go get the local APICs.Gabe Black
This is so they don't have to declare themselves to the IO APIC and don't have to have a pointer to the platform object.
2011-10-08Ports: Print the port name when a port is used but not attached to anything.Gabe Black
2011-10-04SE/FS: Put platform pointers in fewer objects.Gabe Black
Not all objects need a platform pointer, and having one creates a dependence on their being a platform object. This change removes the platform pointer to from the base device object and moves it into subclasses that actually need it.
2011-09-30SE/FS: Remove System::platform and Platform::intrFrequency.Gabe Black
In order for a system object to work in SE mode and FS mode, it has to either always require a platform object even in SE mode, or get rid of the requirement all together. Making SE mode carry around unnecessary/unused bits of FS seems less than ideal, so I decided to go with the second option. The platform pointer in the System class was used for exactly one purpose, a path for the Alpha Linux system object to get to the real time clock and read its frequency so that it could short cut the loops_per_jiffy calculation. There was also a copy and pasted implementation in MIPS, but since it was only there because it was there in Alpha I still count that as one use. This change reverses the mechanism that communicates the RTC frequency so that the Tsunami platform object pushes it up to the AlphaSystem object. This is slightly less specific than it could be because really only the AlphaLinuxSystem uses it. Because the intrFrequency function on the Platform class was no longer necessary (and unimplemented on anything but Alpha) it was eliminated. After this change, a platform will need to have a system, but a system won't have to have a platform.
2011-09-30SE/FS: Build the devices in SE mode.Gabe Black
2011-09-22event: minor cleanupSteve Reinhardt
Initialize flags via the Event constructor instead of calling setFlags() in the body of the derived class's constructor. I forget exactly why, but this made life easier when implementing multi-queue support. Also rename Event::getFlags() to isFlagSet() to better match common usage, and get rid of some unused Event methods.
2011-09-13IGbE: Clean up debug printing and proprly account for copied bytes.Ali Saidi
Some DPRINTFs were printing uninitalized values because the DPRINTFs were always being printed even when the features they were printing weren't being used. This change moves the DPRINTFs into the appropriate if blocks and initializes the state variables correctly. There also is a case where the offset into the packet could be calculated incorrectly during a DMA that is fixed.
2011-08-19ARM: Add VExpress_E support with PCIe to gem5Ali Saidi
2011-08-19ARM: Add support for Versatile Express boardsAli Saidi
2011-08-19ARM: Make GIC function that should only be called by GIC protected.Ali Saidi
2011-08-19IDE: Fix issues with new PIIX kernel driver and our model.Ali Saidi
The driver can read the IDE config register as a 32 bit register since some adapters use bit 18 as a disable channel bit. If the size isn't set in a PRD it should be 64K according to the SPEC (and driver) not 128K.
2011-08-19ARM: Add per-cpu local timers for ARM.Geoffrey Blake
Cortex-A9 processors can have a local timer and watchdog counter. It is enabled by default in Linux and up to this point we've had to disable them since a model wasn't available. This change allows a default MP ARM Linux configuration to boot.