summaryrefslogtreecommitdiff
path: root/src/dev
AgeCommit message (Collapse)Author
2016-11-09style: [patch 1/22] use /r/3648/ to reorganize includesBrandon Potter
2016-12-19dev: Include DmaDevice in NULL buildsAndreas Sandberg
Builds for the NULL ISA include Device.py, which contains the Python declaration of DmaDevice, but don't include the actual C++ implementation. Add dma_device.cc to the NULL build to the Python and C++ worlds consistent again. Change-Id: I47a57181a1f4d5a7276467678bf16fbc7f161681 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
2016-12-19python: Fix incorrect header in the DmaDevice wrapperAndreas Sandberg
The header declared in the DmaDevice wrapper doesn't actually contain the DmaDevice class. This can potentially lead to incorrect type cases in Swig. Change-Id: If2266d4180d1d6fd13359a81067068854c5e96fe Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
2016-12-06dev: Fix race conditions at terminating dist-gem5 simulationsGabor Dozsa
Two problems may arise when a distributed gem5 simulation terminates: (i) simulation thread(s) may get stuck in an incomplete synchronisation event which prohibits processing the simulation exit event; and (ii) a stale receiver thread may try to access objects that have already been deleted while exiting gem5. This patch terminates receive threads properly and aborts the processing of any incomplete synchronisation event. Change-Id: I72337aa12c7926cece00309640d478b61e55a429 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-11-29dev: Fix buffer length when unserializing an eth pktMichael LeBeane
Changeset 11701 only serialized the useful portion of of an ethernet packets' payload. However, the device models expect each ethernet packet to contain a 16KB buffer, even if there is no data in it. This patch adds a 'bufLength' field to EthPacketData so the original size of the packet buffer can always be unserialized. Reported-by: Gabor Dozsa <Gabor.Dozsa@arm.com>
2016-10-26dev: Add m5 op to toggle synchronization for dist-gem5.Michael LeBeane
This patch adds the ability for an application to request dist-gem5 to begin/ end synchronization using an m5 op. When toggling on sync, all nodes agree on the next sync point based on the maximum of all nodes' ticks. CPUs are suspended until the sync point to avoid sending network messages until sync has been enabled. Toggling off sync acts like a global execution barrier, where all CPUs are disabled until every node reaches the toggle off point. This avoids tricky situations such as one node hitting a toggle off followed by a toggle on before the other nodes hit the first toggle off.
2016-10-26dev: Add 'simLength' parameter in EthPacketDatamlebeane
Currently, all the network devices create a 16K buffer for the 'data' field in EthPacketData, and use 'length' to keep track of the size of the packet in the buffer. This patch introduces the 'simLength' parameter to EthPacketData, which is used to hold the effective length of the packet used for all timing calulations in the simulator. Serialization is performed using only the useful data in the packet ('length') and not necessarily the entire original buffer.
2016-10-15arm, dev: pl011 console interactivityBjoern A. Zeeb
Improve PL011 console interactivity Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
2016-10-07dev, arm: Make GenericTimer param handling more robustAndreas Sandberg
The generic timer needs a pointer to an ArmSystem to wire itself to the system register handler. This was previously specified as an instance of System that was later cast to ArmSystem. Make this more robust by specifying it as an ArmSystem in the Python interface and add a check to make sure that it is non-NULL. Change-Id: I989455e666f4ea324df28124edbbadfd094b0d02 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-09-22arm: disable GIC extensionsCurtis Dunham
Change-Id: If19b9c593b48ded1ea848f2d3710d4369ec8a221 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-09-13dev: Add a DmaCallback class to DmaDeviceMichael LeBeane
This patch introduces the DmaCallback helper class, which registers a callback to fire after a sequence of (potentially non-contiguous) DMA transfers on a DmaPort completes.
2016-09-13dev: Exit correctly in dist-gem5Michael LeBeane
The receiver thread in dist_iface is allowed to directly exit the simulation. This can cause exit to be called twice if the main thread simultaneously wants to exit the simulation. Therefore, have the receiver thread enqueue a request to exit on the primary event queue for the main simulation thread to handle.
2016-09-06dev, arm: Add a customizable NoMali GPU modelAndreas Sandberg
Add a customizable NoMali GPU model and an example Mali T760 configuration. Unlike the normal NoMali model (NoMaliGpu), the NoMaliCustopmGpu model exposes all the important GPU ID registers to Python. This makes it possible to implement custom GPU configurations by without changing the underlying NoMali library. Change-Id: I4fdba05844c3589893aa1a4c11dc376ec33d4e9e Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
2016-08-16dev: Revert 0a316996de76 [dev, sim: Added missing override...]Andreas Sandberg
This changeset reverts the changset "dev, sim: Added missing override keywords to fix CLANG compilation (OSX)" which was incorrectly rebased. Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15dev, sim: Added missing override keywords to fix CLANG compilation (OSX)Matteo Andreozzi
Change-Id: Ice5fa11e77d06576eaa42149f5fa340a769d8b01 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-10arm, dev: Add support for listing DMA ports in new platformsAndreas Sandberg
When using a Ruby memory system, the Ruby configuration scripts expect to get a list of DMA ports to create the necessary DMA sequencers. Add support in the utility functions that wire up devices to append DMA ports to a list instead of connecting them to the IO bus. These functions are currently only used by the VExpress_GEM5_V1 platform. Change-Id: I46059e46b0f69e7be5f267e396811bd3caa3ed63 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
2016-08-10arm: Don't report the boot ROM as a memory in config tablesAndreas Sandberg
The boot ROM shouldn't be used as a memory by the kernel. Memories have a flag to indicate this which is set for some platforms. Update all platforms to consistently set this flag to indicate that the boot ROM shouldn't be reported as normal memory. Change-Id: I2bf0273e99d2a668e4e8d59f535c1910c745aa7b Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Brad Beckmann <brad.beckmann@amd.com> --HG-- extra : amend_source : c2cbda38636ea37cbe9ae6977a06b923eab5ba56
2016-08-02arm: s/ctx_id/ctx/ the GICCurtis Dunham
Factored out of the larger banked register change. Change-Id: I947dbdb9c00b4678bea9d4f77b913b7014208690 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-02arm: bank GIC registers per CPUCurtis Dunham
Updated according to GICv2 documentation. Change-Id: I5d926d1abf665eecc43ff0f7d6e561e1ee1c390a Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-07-19dev, dist: Fixed a scheduling bug in the etherswitchMohammad Alian
This patch fixes a bug in etherswitch. When a packet gets inserted in the output fifo, the txEvent has to always be reschedule, not only when an event is already scheduled. This can raise the assertion in the reschedule function.
2016-06-08dist, dev: Fixed the packet ordering in etherswitchMohammad Alian
This patch fixes the order that packets gets pushed into the output fifo of etherswitch. If two packets arrive at the same tick to the etherswitch, we sort and push them based on their source port id. In dist-gem5 simulations, if there is no ordering inforced while two packets arrive at the same tick, it can lead to non-deterministic simulations Committed by Jason Lowe-Power <power.jg@gmail.com>
2016-06-06stats: Fixing regStats function for some SimObjectsDavid Guillen Fandos
Fixing an issue with regStats not calling the parent class method for most SimObjects in Gem5. This causes issues if one adds new stats in the base class (since they are never initialized properly!). Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-06-06sim: Call regStats of base-class as wellStephan Diestelhorst
We want to extend the stats of objects hierarchically and thus it is necessary to register the statistics of the base-class(es), as well. For now, these are empty, but generic stats will be added there. Patch originally provided by Akash Bagdia at ARM Ltd.
2016-05-26dev, arm: Add a flag to enable/disable gem5 GIC extensionsAndreas Sandberg
Make it possible to disable gem5 gic extensions by setting the gem5_extensions param to False from Python. Change-Id: Icb255105925ef49891d69cc9fe5cc55578ca066d Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Geoffrey Blake <geoffrey.blake@arm.com>
2016-05-26arm, dev: Remove superfluous loop increment in flash deviceAndreas Hansson
As identified by clang-3.8, there was a superfluous loop increment in the flash device which is now removed. Change-Id: If46a1c4f72d3d4c9f219124030894ca433c790af Reviewed-by: Rene De Jong <rene.dejong@arm.com>
2016-05-19arm,dev: PL011 UART_FR read status enhancementBjoern A. Zeeb
Given we do not simulate a FIFO currently there are only two states we can be in upon read: empty or full. Properly signal the latter. Add and sort constants for states in the header file. Committed by Jason Lowe-Power <power.jg@gmail.com>
2016-05-19dev, virtio: properly set PCI address space to use IOREGBjoern A. Zeeb
VirtIO spec < 1.0 demands IOREG to be used on PCI and not memory mapped. Set the correct bit on the PCI address accordingly. Committed by Jason Lowe-Power <power.jg@gmail.com>
2016-05-06dev, arm: Update GIC to use GICv2 register namingAndreas Sandberg
The GICv2 has a new and slightly more consistent register naming. Update gem5's GIC register names to match the new documentation. Change-Id: I8ef114eee8a95bf0b88b37c18a18e137be78675a Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
2016-04-27dev: Fix incorrect terminal backlog handlingAndreas Sandberg
The Terminal device currently uses the peek functionality in gem5's circular buffer implementation to send existing buffered content on the terminal when a new client attaches. This functionallity is however not implemented correctly and re-sends the same block multiple time. Add the required functionality to peek with an offset into the circular buffer and change the Terminal::accept() implementation to send the buffered contents. Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-04-12misc: Appease clang...againAndreas Hansson
Once again, clang is having issues with recently committed code. Unfortunately HSAIL_X86 is still broken.
2016-04-07Revert to 74c1e6513bd0 (sim: Thermal support for Linux)Andreas Sandberg
2014-11-18power: Add power states to ClockedObjectAkash Bagdia
Add 4 power states to the ClockedObject, provides necessary access functions to check and update the power state. Default power state is UNDEFINED, it is responsibility of the respective simulation model to provide the startup state and any other logic for state change. Add number of transition stat. Add distribution of time spent in clock gated state. Add power state residency stat. Add dump call back function to allow stats update of distribution and residency stats.
2015-05-13sim: Thermal support for LinuxDavid Guillen Fandos
This patch enables Linux to read the temperature using hwmon infrastructure. In order to use this in your gem5 you need to compile the kernel using the following configs: CONFIG_HWMON=y CONFIG_SENSORS_VEXPRESS=y And a proper dts file (containing an entry such as): dcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; temp@0 { compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; label = "DCC"; }; };
2015-11-26dev: Add post-fork handling for disk imagesAndreas Sandberg
This changeset adds support for notifying the disk images that the simulator has been forked. We need to disable the saving of the CoW disk image from the child process, and we need to make sure that systems which use a raw disk image are not allowed to fork to avoid two or more gem5 processes writing to the same disk image. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> [sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version] Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2015-11-27base: Add support for changing output directoriesAndreas Sandberg
This changeset adds support for changing the simulator output directory. This can be useful when the simulation goes through several stages (e.g., a warming phase, a simulation phase, and a verification phase) since it allows the output from each stage to be located in a different directory. Relocation is done by calling core.setOutputDir() from Python or simout.setOutputDirectory() from C++. This change affects several parts of the design of the gem5's output subsystem. First, files returned by an OutputDirectory instance (e.g., simout) are of the type OutputStream instead of a std::ostream. This allows us to do some more book keeping and control re-opening of files when the output directory is changed. Second, new subdirectories are OutputDirectory instances, which should be used to create files in that sub-directory. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> [sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version] Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-02-23dev, arm: Implement the NoMali reset callbackAndreas Sandberg
Add a callback handler for the NoMali reset callback. This callback is called whenever the GPU is reset using the register interface or the NoMali API. The callback can be used to override ID registers using the raw register API.
2016-02-23dev, arm: Refactor the NoMali GPUAndreas Sandberg
Refactor and cleanup the NoMaliGpu class: * Use a std::map instead of a switch block to map the parameter enum describing the GPU type to a NoMali type. * Remove redundant NoMali handle from the interrupt callback. * Make callbacks and API wrappers protected instead of private to enable future extensions. * Wrap remaining NoMali API calls.
2016-02-23scons: Add missing override to appease clangAndreas Hansson
Make clang happy...again.
2016-02-15misc: Add missing overrides to appease clangAndreas Hansson
Since the last round of fixes a few new issues have snuck in. We should consider switching the regression runs to clang.
2016-02-06style: eliminate explicit boolean comparisonsSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-control -a' to get rid of '== true' comparisons, plus trivial manual edits to get rid of '== false'/'== False' comparisons. Left a couple of explicit comparisons in where they didn't seem unreasonable: invalid boolean comparison in src/arch/mips/interrupts.cc:155 >> DPRINTF(Interrupt, "Interrupts OnCpuTimerINterrupt(tc) == true\n");<< invalid boolean comparison in src/unittest/unittest.hh:110 >> "EXPECT_FALSE(" #expr ")", (expr) == false)<<
2016-02-06style: fix missing spaces in control statementsSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-control -a'.
2016-02-06style: remove trailing whitespaceSteve Reinhardt
Result of running 'hg m5style --skip-all --fix-white -a'.
2016-02-06dist, dev: add an ethernet switch modelMohammad Alian
2016-01-17sim: don't ignore SIG_TRAPSteve Reinhardt
By ignoring SIG_TRAP, using --debug-break <N> when not connected to a debugger becomes a no-op. Apparently this was intended to be a feature, though the rationale is not clear. If we don't ignore SIG_TRAP, then using --debug-break <N> when not connected to a debugger causes the simulation process to terminate at tick N. This is occasionally useful, e.g., if you just want to collect a trace for a specific window of execution then you can combine this with --debug-start to do exactly that. In addition to not ignoring the signal, this patch also updates the --debug-break help message and deletes a handful of unprotected calls to Debug::breakpoint() that relied on the prior behavior.
2016-01-15dev, arm: Add a platform with support for both aarch32 and aarch64Andreas Sandberg
Add a platform with support for both aarch32 and aarch64. This platform implements a subset of the devices in a real Versatile Express and extends it with some gem5-specific functionality. It is in many ways similar to the old VExpress_EMM64 platform, but supports the following new features: * Automatic PCI interrupt assignment * PCI interrupts allocated in a contiguous range. * Automatic boot loader selection (32-bit / 64-bit) * Cleaner memory map where gem5-specific devices live in CS5 which isn't used by current Versatile Express platforms. * No fake devices. Devices that were previously faked will be removed from the device tree instead. * Support for 510 GiB contiguous memory
2016-01-15dev, arm: Add support for automatic PCI interrupt routingAndreas Sandberg
Add support for automatic PCI interrupt routing using a device's ID on the PCI bus. Our current DTBs typically tell the kernel that we do this or something similar when declaring the PCI controller. This changeset adds an option to make the simulator behave in the same way. Interrupt routing can be selected by setting the int_policy parameter in the GenericArmPciHost. The following values are supported: * ARM_PCI_INT_STATIC: Use the old static routing policy using the interrupt line from a device's configurtion space. * ARM_PCI_INT_DEV: Use device number on the PCI bus to map to an interrupt in the GIC. The interrupt is computed as: gic_int = int_base + (pci_dev % int_count) * ARM_PCI_INT_PIN: Use device interrupt pin on the PCI bus to map to an interrupt in the GIC. The PCI specification reserves pin ID 0 for devices without interrupts, the interrupt therefore computed as: gic_int = int_base + ((pin - 1) % int_count)
2016-01-11scons: Enable -Wextra by defaultAndreas Hansson
Make best use of the compiler, and enable -Wextra as well as -Wall. There are a few issues that had to be resolved, but they are all trivial.
2016-01-07dev: Distributed Ethernet link for distributed gem5 simulationsGabor Dozsa
Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2015-12-31mem: Make cache terminology easier to understandAndreas Hansson
This patch changes the name of a bunch of packet flags and MSHR member functions and variables to make the coherency protocol easier to understand. In addition the patch adds and updates lots of descriptions, explicitly spelling out assumptions. The following name changes are made: * the packet memInhibit flag is renamed to cacheResponding * the packet sharedAsserted flag is renamed to hasSharers * the packet NeedsExclusive attribute is renamed to NeedsWritable * the packet isSupplyExclusive is renamed responderHadWritable * the MSHR pendingDirty is renamed to pendingModified The cache states, Modified, Owned, Exclusive, Shared are also called out in the cache and MSHR code to make it easier to understand.
2015-12-10dev: Add missing SConscript in src/dev/i2cAndreas Sandberg