summaryrefslogtreecommitdiff
path: root/src/dev
AgeCommit message (Collapse)Author
2020-01-06dev-arm: Fix SMMUv3 walkMasks in page table opsMichiel van Tol
The masks did not include the high bits above the active addressing bits. This could cause overlapping issues when using high addresses. (Translated with TTBR1) Change-Id: Ib705558aac456c1b3f069e1bd3ccdd9229a1c1d2 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23764 Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2020-01-06dev-arm: Fix SMMUv3 16KB next-level table address maskingGiacomo Travaglini
The next-level table address for a granule size of 16KB is retrieved from the 47:14 bits of the current table descriptor (instead of 47:12, which is the valid masking for a 4KB granule) Change-Id: I570138a34003dc034d8e67dc1209316157d57205 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Michiel van Tol <michiel.vantol@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23763 Tested-by: kokoro <noreply+kokoro@google.com>
2020-01-06dev-arm: GICv3, handle GICR_ICFGR0 WI behaviourAdrian Herrera
Architecture states write accesses to GICR_ICFGR0 are WI. This patch implements handling of this behaviour instead of crashing as an invalid offset. This is required to support certain software behaviour. Change-Id: I1f8c57838566c360d243a925306ec35c64a920b2 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24063 Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-12-20configs: arm realview(64) regressions using VExpress_GEM5_V1Giacomo Travaglini
This patch is updating the arm regression configs so that the newer VExpress_GEM_V1 platform is used instead of the older VExpress_EMM and VExpress_EMM64. A new optional kernel_mode argument has been added in order to distinguish between realview and realview64 platforms. If not provided the config will assume the machine is running a AArch64 kernel. Other notable additions: - DTB autogeneration in regressions - Using minimal m5exit.squashfs disk image Change-Id: Ia230565f072fe3eb7756c41876dba4657583f4df Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22687 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
2019-12-13dev-virtio: VIO9P turns on diod verbose output with -d 1Ciro Santilli
Change-Id: I97e5762f4aca384068b87e22902e071fa3014ceb Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22829 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
2019-12-13dev-virtio: don't set the 9p default rootCiro Santilli
It is better to force users to explicitly set this argument, since it is unlikely that we will find one safe option for all users. Change-Id: I612520a44efd205a029a40cd13402584d16e1d88 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22828 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-12-13dev-virtio: use diod basename as the default 9p pathCiro Santilli
This allows diod to be present anywhere in the PATH by default, which works because we are already using execlp. Change-Id: I9d0b6c9a75f32cf0cb5d8f52bb00c465e4d43e1b Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22827 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-12-10dev-arm: GenericTimer, configurable base and low freqsAdrian Herrera
Architecture states the system counter has a fixed base frequency provided in the first entry of the frequency modes table. Optionally, other lower frequencies may be specified in consecutive entries. This patch adds configurable frequencies to the GenericTimer model. The default base frequency is kept as the one that was previously hardcoded for backwards compatibility. The table is not recommended to be updated once the system is running. Change-Id: Icba0b340a0eb1cbb47dfe7d7e03b547af4570c60 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22425 Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-12-10dev-arm: GenericTimer, freq as 32-bit valueAdrian Herrera
The System Counter frequency is now a 32-bit value. This is consistent with CNTFRQ and CNTFRQ_EL0 register sizes. Change-Id: I39886a3767adbe9c58887b8b6d5f30ebc6035bcc Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22424 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-28dev-arm: Automatically assign PCI device ids in attachPciDeviceCiro Santilli
Simulation scripts currently need to assign PCI device addresses when adding new devices. This change moves this responsibility to the VExpress_GEM5_BASE::attachPciDevice method. Change-Id: I6d62af8a8f9176d964cc011dd8fb9744154bbb87 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22830 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-11-28dev-arm: device name in AmbaFake accessesAdrian Herrera
This patch prints the name of the AmbaFake device being accessed. This is useful for identifying the device triggering the warning. Change-Id: I69ca06d5d9bce73d918b8c8b46bb43e92597933b Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22847 Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-25dev-arm: Adjust off_chip ranges in VExpress_GEM5 platformGiacomo Travaglini
This is need after commit b4c9996d894118be04cdf4ed793b35a1d5001942 which makes the AddrRange end address non inclusive. Change-Id: I859b84f6a91107815236b67c4596291c78881fe3 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23003 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-20base,tests: Expanded GTests for addr_range.hhBrandon Potter
These tests assume the "end address" is not included in the range. This exposed some bugs in addr_range.hh which have been fixed. Where appropriate code comments in addr_range.hh have been extended to improve understanding of the class's behavior. Hard-coded AddrRange values in the project have been updated to take into account that end address is now exclusive. The python params.py interface has been updated to conform to this new standard. Change-Id: Idd1e75d5771d198c4b8142b28de0f3a6e9007a52 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22427 Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-14arch-arm: Refactor code to check if gic is GicV2Chun-Chen TK Hsu
Refactor code to use cpu_addr only when gic is GicV2 since cpu_addr is only meanful to GicV2. Test: Boot Android P successfully with the following command: M5_PATH=$PWD/fs_files ./build/ARM/gem5.opt ./configs/example/arm/fs_bigLITTLE.py --dtb $PWD/fs_files/binaries/armv8_gem5_v2_1cpu.dtb --kernel $PWD/fs_files/binaries/vmlinux --disk $PWD/fs_files/disks/disk.img --kernel-init "/init" --cpu-type fastmodel --machine-type VExpressFastmodel --big-cpu-clock "2GHz" --big-cpus 1 --little-cpus 0 --mem-size 8GB --kernel-cmd "earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=8GB root=/dev/vda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=2 android.bootanim=0 vmalloc=640MB android.early.fstab=/fstab.gem5 androidboot.selinux=permissive audit=0 cma=128M" Change-Id: Iedd1388f292685c25f1effcd2e14b3db8899dff9 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21339 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
2019-11-14fastmodel: Add VExpressFastmodel platformChun-Chen TK Hsu
A VExpress based platform with FastModelGIC as interrupt controller. Change-Id: I5ef6d04573d271225d7b39c110e93350a290c371 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21359 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-05dev-arm: optional instantiation of GICv3 ITSAdrian Herrera
GICv3 ITS is an optional component of GICv3. The previous behaviour was for a stub ITS to be created by default, which resulted in a crash for use cases where a GICv3 with no ITS is required. This patch removes the instantiation of the ITS by default and adds checks for its presence both in initialization and device tree generation code. Change-Id: Id424924c8c1152d512aaa2837de4aa60329ec234 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22423 Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-11-01dev-arm: Add SMMUv3 to VExpress_GEM5_V*Giacomo Travaglini
The VExpress_GEM5_V* Platforms will now optionally make use of the SMMUv3. In order to attach a devices to it, a user must simply use the attachSmmu method, making sure the device it is not part of the _on_chip_devices(). Change-Id: Ib819eb50d43dba1f5e5d1a1f7159ac4fbaccff6e Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21559 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30dev: Make the virtio devices track endianness explicitly.Gabe Black
These classes now track what endianness they're supposed to use explicitly, initially set by the getGuestByteOrder accessor on the system object. In the future, if the endianness depends on the version of the VirtIO spec as the comment suggest, it will be easier to dynamically set the endianness in the various structures based on the version being used, Since there isn't anything special about the virt IO versions of these converters other than their types, and since the endianness conversion infrastructure can be taught how to convert new types, the code was switched over to using the standard htog and gtoh but with the explicit byte order provided. This also gets rid of the final use of TheISA in the dev directory. Change-Id: I9345e3295eb27fc5eb87e8ce0d8d424ad1e75d2d Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22273 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30dev: Adding support for large BARPouya Fotouhi
During PCI setup, this patch checks if a Base Address Register (BAR) is used as a large BAR (64 bits rather than 32), and return proper address range. The order which updates are done is decided by kernel, so this patch implements both cases (writing lower or upper bits first). Bit 2 in a BAR indicates a 64-bit decoder (10X to be more exact, 11X is reserved). The addresses in BARAddrs are full addresses and are set to zero for BAR providing upper 32 bits to avoid conflicts in addr ranges reported. Change-Id: I93303d36ac83dab9ed6837c81e77c9dfb778f409 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22082 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30dev: Remove TheISA from ns_gige.cc.Gabe Black
It was not being used there. Change-Id: Ib39cfb52553e0556f7a6ad616e1029c74fa90e1f Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22271 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-30dev: Stop including config/the_isa.hh unnecessarily.Gabe Black
This file was included in a few files which didn't use TheISA. Change-Id: Ib296b88dc6cfe9d487ee31cf385bb872d2cffaf2 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22270 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-30dev: Get PageBytes from the system in the ARM generic timer.Gabe Black
These will ultimately by ArmISA::PageBytes, but this is more consistent with other devices which don't know what ISA they're part of. Change-Id: Iac13d5010564512207ed009377a771ee5949eff3 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22269 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-30dev: Get PageBytes from the system in the ide_disk model.Gabe Black
This avoids having to use TheISA::. Change-Id: I020860ab343f9b6fafbcb0e23479d0b64f094512 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22268 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-30dev: Remove using namespace std and TheISA from ide_disk.cc.Gabe Black
Neither was necessary since either that namespace wasn't used, or was used explicitly when referenced. Change-Id: I96d2791c09250255e7e65d47cbb6f65eb4fcb3ba Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22267 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-30arm: Get rid of using namespace std and TheISA in realview.cc.Gabe Black
Neither was actually used by the nearly empty file. Change-Id: Ief1b77b18c8c616511bf9870e1667439a42dfcbd Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22266 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30dev: Remove SINIC_VTOPHYS and related code.Gabe Black
The code in this #ifdef isn't turned on by anything, and either has or likely will bitrot, especially since there are no tests to even determine manually if the code they guard works. They are also preceeded by panics which say that the code they guard is known not to work now anyway. This change also gets rid of TheISA in that file since the only reason it was around was for vtophys in the guarded code. Change-Id: I59fd8974d0dd3d7ab0d5a8ccfa6a446d2da41eb0 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22265 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30alpha: Remove TheISA from the Alpha devices.Gabe Black
These are the from the various bits of the tsunami platform. They primarily consisted of "using TheISA" which could be replaced with using AlphaISA or removed altogether (I went with the later), and use of TheISA:: which I replaced with AlphaISA::. Change-Id: Ic52577c65241a92a3f1ae318a19431f8faa50a66 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22264 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-30x86: Remove TheISA from x86 devices.Gabe Black
This was really only in the PC platform class. Change-Id: I5365d965ea335a7c45be9f80706a875b19ed0417 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22263 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-22configs: Clean setupBootLoader signatureGiacomo Travaglini
This is because the bus parameter is not used anymore Change-Id: I27aa8cc064904a6e3e0376f61eb7db74ea1a4d6c Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22002 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-10-22dev-arm, configs: Using _on_chip_memory for on chip memoryGiacomo Travaglini
This patch is pulling the on-chip memory outside of the on_chip_devices list. The external interface will be more or less the same: configuration scripts will still use the attachOnChipIO method; a new kw argument has been added in order to store mem_ports. We want to provide to on-chip memory the same mechanism used when collecting on-chip dma ports. This is needed when using Ruby, since we need to pass a non None mem_ports to prevent the bootmem to be wired to the bus. Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000 Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-19arch: Make a base class for Interrupts.Gabe Black
That abstracts the ISA further from the CPU, getting us a small step closer to being able to build in more than one ISA at a time. Change-Id: Ibf7e26a3df411ffe994ac1e11d2a53b656863223 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20831 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
2019-10-18dev-arm: Check for gem5 extensions in GicV2Tiago Muck
Using GicV2 without setting the gem5_extensions parameter in a config with more than 8 is not allowed to prevent overflow of the 8-bit mask. Change-Id: I780c6985e8f44ed780b4f74f9a27805124e23a7b Signed-off-by: Tiago Mück <tiago.muck@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19288 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-15x86: Use a std::function to handle MSI completion.Gabe Black
This removes the recvResponse callback from the IntMasterPort, and makes it easier to handle the default case where we just need to clean up the Packet. Change-Id: I8bcbfee0aaf68b12310d773f925c399fc87ea65d Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20828 Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2019-10-15dev-arm: Carve out a portion of VExpress_GEM5 for the bootloaderGiacomo Travaglini
This patch is carving out a portion of VExpress_GEM5 memory for the bootloader. Prior to this patch this was only happening conditionally/dynamically via the setupBootLoader call. With this patch the region is always present and the setupBootLoader doesn't instantiate memory, it is only setting up some bootloader parameters. Change-Id: Iaa5cdf471b14e8faa37353a25631bf7c6fc64afc Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21604 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-15x86: De-x86ify the IntMasterPort.Gabe Black
The devices which host an IntMasterPort are very specific to x86 at the moment, but the ports don't have to be. This change moves responsibilities around so that the x86 specific aspects are handled in the device, and the ports themselves are ISA agnostic. Change-Id: I50141b66895be7d8f6303605505002ef424af7fd Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20827 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-14x86: Simplify and consolidate the code that assembles an MSI on x86.Gabe Black
There is no interrupt response message, and so no need for a function which would construct one. The other functions which construct the request can be consolidated since the work being done by each is incremental. The template parameters can be used to support multiple types and offsets in a single function, and since that function also doesn't have to do much work, it makes sense to do everything in one shot. Change-Id: I41b202a263a697c5ada6817f3ab2a4728281b894 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20826 Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
2019-10-12x86: Stop using and delete the x86 IntDevice class.Gabe Black
Most of its functionality has been exported already. This change makes the two classes which were inheriting IntDevice create an IntMasterPort themselves. Change-Id: I73d17cd79cf8252b0e26dd2576f552bf9054adf4 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20825 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-10dev-arm, configs: Remove RealViewPBX platformGiacomo Travaglini
This is an old unused platform. We should support VExpress_GEM5 based platforms only. Change-Id: If9c29047b2d068992dfbbe0dc268c70b788cce5f Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21601 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-03dev, misc: Fixing "may be used unitialized" compilation errorBobby R. Bruce
When compiling using "scons build/X86/base", "error: 'tx_queue_size' may be used uninitialized in this function" is received (cc1plus: all warnings treated as errors). tx_queue_size is now initialized to zero to avoid this compilation error. Change-Id: I0e2a4fd9ad6053c4c4124c83da9a7919778bcc52 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21399 Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-02dev-arm: Improve fault message on SMMUv3 translation faultMarc Mari Barcelo
Change-Id: Ib1d7ae73951b52f2378f8bd50e804d3237f74074 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21303 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-02dev-arm: Fix address used to update the SMMUv3 Walk CacheMarc Mari Barcelo
Last level of SMMUv3 WalkCache should store the address without an offset. Change-Id: I1046bd8210500c2c38802acd41a4403e52fd3c90 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21302 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-10-02x86: Switch from MessageReq and Resp to WriteReq and Resp.Gabe Black
Originally MessageReq was intended to mark a packet as a holding a message destined for a particular recipient and which would not interact with other packets. This is similar to the way a WriteReq would behave if writing to a device register which needs to be updated atomically. Also, while the memory system *could* recognize a MessageReq and know that it didn't need to interact with other packets, that was never implemented. Change-Id: Ie54301d1d8820e206d6bae96e200ae8c71d2d784 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20823 Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com>
2019-09-21x86: Templatize the IntMasterPort.Gabe Black
This makes the IntMasterPort usable with any class, making it possible to avoid inheriting from IntDevice. It also makes IntMasterPort inherit directly from QueuedMasterPort, skipping over MessageMasterPort. Change-Id: I9d218556c838ea567ced5f6fa4d57a3ec9d28d31 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20821 Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-09-21x86: Templatize IntSlavePort.Gabe Black
This makes the device IntSlavePort calls back into based on a template parameter so that IntDevice doesn't have to be in the inheritance hierarchy to use it. It also makes IntSlavePort inherit from SimpleTimingPort directly, skipping over MessageSlavePort. Change-Id: Ic3213edc9c3ed5e506ee1e9f5e082cd47d7c7998 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20820 Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2019-09-20dev, x86: Delete the now unused X86 specific interrupt pins/lines.Gabe Black
Change-Id: I3915f0ad673119b551dcc4c5cedec180a9b88735 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20702 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-09-20dev, x86: Convert x86 devices to the generic int pins.Gabe Black
Change-Id: I4551ad00cf205c31555c90b53e87bc206a8d8729 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20701 Reviewed-by: Gabe Black <gabeblack@google.com> Maintainer: Gabe Black <gabeblack@google.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-09-19dev: Terminal output's dump name conflictsAndrea Mondelli
The recently Terminal dump options name introduced in patch 1c72e90 conflict with MacOS stdio.h header. From stdio.h: #define stdin __stdinp #define stdout __stdoutp #define stderr __stderrp To remove this conflict, the TerminalDump options are renamed. Change-Id: I1b60fa1031328fc32d6a58bf7889b6e479d95219 Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20959 Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Maintainer: Jason Lowe-Power <jason@lowepower.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-09-19dev-arm: Conditionally enable HDLcd when doing DTB autogenGiacomo Travaglini
This is a preparation change for a real DTB autogen implementation Change-Id: Ia0c1c5e65ea96036e55455eb4222cec12944d33a Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20331 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-09-19dev-arm: Add HDLcd DTB autogenerationGiacomo Travaglini
A Display has been defined. Its sole purpose is to generate the device tree node to be referenced by the HDLcd device. The encoder parameters are based on the existing node defined in: system/arm/dt/armv8.dts Change-Id: I6cdeb0437dce207dbd0f2c65c16b224245eb74e1 Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20330 Maintainer: Andreas Sandberg <andreas.sandberg@arm.com> Tested-by: kokoro <noreply+kokoro@google.com>
2019-09-16dev-arm: Allow IOMMU binding to HDLcdGiacomo Travaglini
Change-Id: I894080e7bd76e7efedef141c937e1561c0c0527c Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com> Reviewed-by: Ciro Santilli <ciro.santilli@arm.com> Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20841 Tested-by: kokoro <noreply+kokoro@google.com> Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 15:49:52 +0000