| Age | Commit message (Collapse) | Author |
|---|
|
This patch merely tidies up the types used for the bus member
variables. It also makes the constant ones const.
|
|
This patch takes the final plunge and transitions from the templated
Range class to the more specific AddrRange. In doing so it changes the
obvious Range<Addr> to AddrRange, and also bumps the range_map to be
AddrRangeMap.
In addition to the obvious changes, including the removal of redundant
includes, this patch also does some house keeping in preparing for the
introduction of address interleaving support in the ranges. The Range
class is also stripped of all the functionality that is never used.
--HG--
rename : src/base/range.hh => src/base/addr_range.hh
rename : src/base/range_map.hh => src/base/addr_range_map.hh
|
|
This patch moves the clock of the CPU, bus, and numerous devices to
the new class ClockedObject, that sits in between the SimObject and
MemObject in the class hierarchy. Although there are currently a fair
amount of MemObjects that do not make use of the clock, they
potentially should do so, e.g. the caches should at some point have
the same clock as the CPU, potentially with a 1:n ratio. This patch
does not introduce any new clock objects or object hierarchies
(clusters, clock domains etc), but is still a step in the direction of
having a more structured approach clock domains.
The most contentious part of this patch is the serialisation of clocks
that some of the modules (but not all) did previously. This
serialisation should not be needed as the clock is set through the
parameters even when restoring from the checkpoint. In other words,
the state is "stored" in the Python code that creates the modules.
The nextCycle methods are also simplified and the clock phase
parameter of the CPU is removed (this could be part of a clock object
once they are introduced).
|
|
This patch splits the existing buses into multiple layers. The
non-coherent bus is split into a request and a response layer, and the
coherent bus adds an additional layer for the snoop responses. The
layer is modified to be templatised on the port type, such that the
different layers can have retryLists with either master or slave
ports. This patch also removes the dynamic cast from the retry, as
previously promised when moving the recvRetry from the port base class
to the master/slave port respectively.
Overall, the split bus more closely reflects any modern on-chip bus
and should be at step in the right direction. From this point, it
would be reasonable straight forward to add separate layers (and thus
contention points and arbitration) for each port and thus create a
true crossbar.
The regressions all produce the correct output, but have varying
degrees of changes to their statistics. A separate patch will be
pushed with the updates to the reference statistics.
|
|
This patch moves all flow control, arbitration and state information
into a bus layer. The layer is thus responsible for all the state
transitions, and for keeping hold of the retry list. Consequently the
layer is also responsible for the draining.
With this change, the non-coherent and coherent bus are given a single
layer to avoid changing any temporal behaviour, but the patch opens up
for adding more layers.
|
|
This patch adds a state enum and member variable in the bus, tracking
the bus state, thus eliminating the need for tickNextIdle and inRetry,
and fixing an issue that allowed the bus to be occupied by multiple
packets at once (hopefully it also makes it easier to understand the
code).
The bus, in its current form, uses tickNextIdle and inRetry to keep
track of the state of the bus. However, it only updates tickNextIdle
_after_ forwarding a packet using sendTiming, and the result is that
the bus is still seen as idle, and a module that receives the packet
and starts transmitting new packets in zero time will still see the
bus as idle (and this is done by a number of DMA devices). The issue
can also be seen in isOccupied where the bus calls reschedule on an
event instead of schedule.
This patch addresses the problem by marking the bus as _not_ idle
already by the time we conclude that the bus is not occupied and we
will deal with the packet.
As a result of not allowing multiple packets to occupy the bus, some
regressions have slight changes in their statistics. A separate patch
updates these accordingly.
Further ahead, a follow-on patch will introduce a separate state
variable for request/responses/snoop responses, and thus implement a
split request/response bus with separate flow control for the
different message types (even further ahead it will introduce a
multi-layer bus).
|
|
This patch makes getAddrRanges const throughout the code base. There
is no reason why it should not be, and making it const prevents adding
any unintentional side-effects.
|
|
This patch introduces a class hierarchy of buses, a non-coherent one,
and a coherent one, splitting the existing bus functionality. By doing
so it also enables further specialisation of the two types of buses.
A non-coherent bus connects a number of non-snooping masters and
slaves, and routes the request and response packets based on the
address. The request packets issued by the master connected to a
non-coherent bus could still snoop in caches attached to a coherent
bus, as is the case with the I/O bus and memory bus in most system
configurations. No snoops will, however, reach any master on the
non-coherent bus itself. The non-coherent bus can be used as a
template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses,
and is typically used for the I/O buses.
A coherent bus connects a number of (potentially) snooping masters and
slaves, and routes the request and response packets based on the
address, and also forwards all requests to the snoopers and deals with
the snoop responses. The coherent bus can be used as a template for
modelling QPI, HyperTransport, ACE and coherent OCP buses, and is
typically used for the L1-to-L2 buses and as the main system
interconnect.
The configuration scripts are updated to use a NoncoherentBus for all
peripheral and I/O buses.
A bit of minor tidying up has also been done.
--HG--
rename : src/mem/bus.cc => src/mem/coherent_bus.cc
rename : src/mem/bus.hh => src/mem/coherent_bus.hh
rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc
rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
|
|
This patch merely remove the Packet* from the isOccupied member
function. Historically this was used to check if the packet was an
express snoop, but this is now done outside this function (where
relevant).
|
|
The main aim of this patch is to arrive at a suitable port interface
for vector ports, including both the packet and the port id. This
patch changes the bus transport functions
(recvFunctional/Atomic/Timing) to require a PortId parameter
indicating the source port. Previously this information was passed by
setting the source field of the packet, and this is only required in
the case of a timing request.
With this patch, the use of the source and destination field is also
more restrictive, as they are only needed for timing accesses. The
modifications to these fields for atomic snoops is now removed
entirely, also making minor modifications to the cache.
|
|
This patch removes the Packet::NodeID typedef and unifies it with the
Port::PortId. The src and dest fields in the packet are used to hold a
port id (e.g. in the bus), and thus the two should actually be the
same.
The typedef PortID is now global (in base/types.hh) and aligned with
the ThreadID in terms of capitalisation and naming of the
InvalidPortID constant.
Before this patch, two flags were used for valid destination and
source, rather than relying on a named value (InvalidPortID), and
this is now redundant, as the src and dest field themselves are
sufficient to tell whether the current value is a valid port
identifier or not. Consequently, the VALID_SRC and VALID_DST are
removed.
As part of the cleaning up, a number of int parameters and local
variables are updated to use PortID.
Note that Ruby still has its own NodeID typedef. Furthermore, the
MemObject getMaster/SlavePort still has an int idx parameter with a
default value of -1 which should eventually change to PortID idx =
InvalidPortID.
|
|
This patch moves send/recvTiming and send/recvTimingSnoop from the
Port base class to the MasterPort and SlavePort, and also splits them
into separate member functions for requests and responses:
send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq,
send/recvTimingSnoopResp. A master port sends requests and receives
responses, and also receives snoop requests and sends snoop
responses. A slave port has the reciprocal behaviour as it receives
requests and sends responses, and sends snoop requests and receives
snoop responses.
For all MemObjects that have only master ports or slave ports (but not
both), e.g. a CPU, or a PIO device, this patch merely adds more
clarity to what kind of access is taking place. For example, a CPU
port used to call sendTiming, and will now call
sendTimingReq. Similarly, a response previously came back through
recvTiming, which is now recvTimingResp. For the modules that have
both master and slave ports, e.g. the bus, the behaviour was
previously relying on branches based on pkt->isRequest(), and this is
now replaced with a direct call to the apprioriate member function
depending on the type of access. Please note that send/recvRetry is
still shared by all the timing accessors and remains in the Port base
class for now (to maintain the current bus functionality and avoid
changing the statistics of all regressions).
The packet queue is split into a MasterPort and SlavePort version to
facilitate the use of the new timing accessors. All uses of the
PacketQueue are updated accordingly.
With this patch, the type of packet (request or response) is now well
defined for each type of access, and asserts on pkt->isRequest() and
pkt->isResponse() are now moved to the appropriate send member
functions. It is also worth noting that sendTimingSnoopReq no longer
returns a boolean, as the semantics do not alow snoop requests to be
rejected or stalled. All these assumptions are now excplicitly part of
the port interface itself.
|
|
This patch makes some rather trivial simplifications to the bus in
that it changes the use of BusMasterPort and BusSlavePort pointers to
simply use MasterPort and SlavePort (iterators are also updated
accordingly).
This change is a step towards a future patch that introduces a
separation of the interface and the structural port itself.
|
|
This patch introduces the PortId type, moves the definition of
INVALID_PORT_ID to the Port class, and also gives every port an id to
reflect the fact that each element in a vector port has an
identifier/index.
Previously the bus and Ruby testers (and potentially other users of
the vector ports) added the id field in their port subclasses, and now
this functionality is always present as it is moved to the base class.
|
|
This patch introduces port access methods that separates snoop
request/responses from normal memory request/responses. The
differentiation is made for functional, atomic and timing accesses and
builds on the introduction of master and slave ports.
Before the introduction of this patch, the packets belonging to the
different phases of the protocol (request -> [forwarded snoop request
-> snoop response]* -> response) all use the same port access
functions, even though the snoop packets flow in the opposite
direction to the normal packet. That is, a coherent master sends
normal request and receives responses, but receives snoop requests and
sends snoop responses (vice versa for the slave). These two distinct
phases now use different access functions, as described below.
Starting with the functional access, a master sends a request to a
slave through sendFunctional, and the request packet is turned into a
response before the call returns. In a system without cache coherence,
this is all that is needed from the functional interface. For the
cache-coherent scenario, a slave also sends snoop requests to coherent
masters through sendFunctionalSnoop, with responses returned within
the same packet pointer. This is currently used by the bus and caches,
and the LSQ of the O3 CPU. The send/recvFunctional and
send/recvFunctionalSnoop are moved from the Port super class to the
appropriate subclass.
Atomic accesses follow the same flow as functional accesses, with
request being sent from master to slave through sendAtomic. In the
case of cache-coherent ports, a slave can send snoop requests to a
master through sendAtomicSnoop. Just as for the functional access
methods, the atomic send and receive member functions are moved to the
appropriate subclasses.
The timing access methods are different from the functional and atomic
in that requests and responses are separated in time and
send/recvTiming are used for both directions. Hence, a master uses
sendTiming to send a request to a slave, and a slave uses sendTiming
to send a response back to a master, at a later point in time. Snoop
requests and responses travel in the opposite direction, similar to
what happens in functional and atomic accesses. With the introduction
of this patch, it is possible to determine the direction of packets in
the bus, and no longer necessary to look for both a master and a slave
port with the requested port id.
In contrast to the normal recvFunctional, recvAtomic and recvTiming
that are pure virtual functions, the recvFunctionalSnoop,
recvAtomicSnoop and recvTimingSnoop have a default implementation that
calls panic. This is to allow non-coherent master and slave ports to
not implement these functions.
|
|
This patch introduces the notion of a master and slave port in the C++
code, thus bringing the previous classification from the Python
classes into the corresponding simulation objects and memory objects.
The patch enables us to classify behaviours into the two bins and add
assumptions and enfore compliance, also simplifying the two
interfaces. As a starting point, isSnooping is confined to a master
port, and getAddrRanges to slave ports. More of these specilisations
are to come in later patches.
The getPort function is not getMasterPort and getSlavePort, and
returns a port reference rather than a pointer as NULL would never be
a valid return value. The default implementation of these two
functions is placed in MemObject, and calls fatal.
The one drawback with this specific patch is that it requires some
code duplication, e.g. QueuedPort becomes QueuedMasterPort and
QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort
(avoiding multiple inheritance). With the later introduction of the
port interfaces, moving the functionality outside the port itself, a
lot of the duplicated code will disappear again.
|
|
This patch unifies the recvFunctional, recvAtomic and recvTiming to
all be based on a similar structure: 1) extract information about the
incoming packet, 2) send it out to the appropriate snoopers, 3)
determine where it is going, and 4) forward it to the right
destination. The naming of variables across the different access
functions is now consistent as well.
Additionally, the patch introduces the member functions releaseBus and
retryWaiting to better distinguish between the two cases when we
should tell a sender to retry. The first case is when the bus goes
from busy to idle, and the second case is when it receives a retry
from a destination that did not immediatelly accept a packet.
As a very minor change, the MMU debug flag is no longer used in the bus.
|
|
This patch moves all port creation from the getPort method to be
consistently done in the MemObject's constructor. This is possible
thanks to the Swig interface passing the length of the vector ports.
Previously there was a mix of: 1) creating the ports as members (at
object construction time) and using getPort for the name resolution,
or 2) dynamically creating the ports in the getPort call. This is now
uniform. Furthermore, objects that would not be complete without a
port have these ports as members rather than having pointers to
dynamically allocated ports.
This patch also enables an elaboration-time enumeration of all the
ports in the system which can be used to determine the masterId.
|
|
This patch adds a check in the findPort method to ensure that an
invalid port id is never returned. Previously this could happen if no
default port was set, and no address matched the request, in which
case -1 was returned causing a SEGFAULT when using the id to index in
the port array. To clean things up further a symbolic name is added
for the invalid port id.
|
|
This patch removes the onRetryList field from the BusPort class and
entirely relies on the retryList which holds all ports that are
waiting to retry. The onRetryList field and the retryList were
previously used with overloaded functionalities and only one is really
needed (there were also checks to assert they held the same
information). After this patch the bus ports will be split into master
and slave ports and this simplifies that transition.
|
|
This patch removes the idiosyncratic nature of the default bus port
and makes it yet another port in the list of interfaces. Rather than
having a specific pointer to the default port we merely track the
identifier of this port. This change makes future port diversification
easier and overall cleans up the bus code.
|
|
The functional ports are no longer used and this patch cleans up the
legacy that is still present in buses, memories, CPUs etc. Note that
this does not refer to the class FunctionalPort (already removed), but
rather ports with the name (and use) functional.
|
|
This patch simplifies the address-range determination mechanism and
also unifies the naming across ports and devices. It further splits
the queries for determining if a port is snooping and what address
ranges it responds to (aiming towards a separation of
cache-maintenance ports and pure memory-mapped ports). Default
behaviours are such that most ports do not have to define isSnooping,
and master ports need not implement getAddrRanges.
|
|
Cleaning up and simplifying the ports and going towards a more strict
elaboration-time creation and binding of the ports.
|
|
|
|
Clean up some minor things left over from the default responder
change in rev 9af6fb59752f. Mostly renaming the 'responder_set'
param to 'use_default_range' to actually reflect what it does...
old name wasn't that descriptive in the first place, but now
it really doesn't make sense at all.
Also got rid of the bogus obsolete assignment to 'bus.responder'
which used to be a parameter but now is interpreted as an
implicit child assignment, and which was giving me problems in
the config restructuring to come. (A good argument for not
allowing implicit child assignments, IMO, but that's water under
the bridge, I'm afraid.)
Also moved the Bus constructor to the .cc file since that's
where it should have been all along.
|
|
|
|
|
|
|
|
|
|
Force all non-default ports to provide a name and an
owner in the constructor.
|
|
--HG--
extra : convert_revision : db8497e73a44f2a06aab121e797e88b4c0c31330
|
|
--HG--
extra : convert_revision : acd70dc98ab840e55b114706fbb6afb2a95e54bc
|
|
--HG--
extra : convert_revision : c7768d54d3f78685e93920069f5485083ca989c0
|
|
SimObjects not yet updated:
- Process and subclasses
- BaseCPU and subclasses
The SimObject(const std::string &name) constructor was removed. Subclasses
that still rely on that behavior must call the parent initializer as
: SimObject(makeParams(name))
--HG--
extra : convert_revision : d6faddde76e7c3361ebdbd0a7b372a40941c12ed
|
|
way so a cache can handle partial block requests for i/o devices.
--HG--
extra : convert_revision : a68b5ae826731bc87ed93eb7ef326a2393053964
|
|
--HG--
extra : convert_revision : e6ef262bbbc5ad53498e55caac1897e6cc2a61e6
|
|
Improve MRU checking for StaticInst, Bus, TLB
--HG--
extra : convert_revision : 9116b5655cd2986aeb4205438aad4a0f5a440006
|
|
--HG--
extra : convert_revision : d7cbec7c277fb8f4d8846203caae36ce629602d5
|
|
Also some additional cleanup of Bus::recvTiming().
--HG--
extra : convert_revision : 156814119f75d04c2e954aec2d7ed6fdc186c26f
|
|
Move check for loops outside, since half the call sites
end up working around it anyway. Return integer port ID
instead of port object pointer.
--HG--
extra : convert_revision : 4c31fe9930f4d1aa4919e764efb7c50d43792ea3
|
|
into vm1.(none):/home/stever/bk/newmem-cache2
configs/example/memtest.py:
Hand merge redundant changes.
--HG--
extra : convert_revision : a2e36be254bf052024f37bcb23b5209f367d37e1
|
|
timing mode still broken.
configs/example/memtest.py:
Revamp options.
src/cpu/memtest/memtest.cc:
No need for memory initialization.
No need to make atomic response... memory system should do that now.
src/cpu/memtest/memtest.hh:
MemTest really doesn't want to snoop.
src/mem/bridge.cc:
checkFunctional() cleanup.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/base_cache.cc:
src/mem/cache/base_cache.hh:
src/mem/cache/cache.cc:
src/mem/cache/cache.hh:
src/mem/cache/cache_blk.hh:
src/mem/cache/cache_builder.cc:
src/mem/cache/cache_impl.hh:
src/mem/cache/coherence/coherence_protocol.cc:
src/mem/cache/coherence/coherence_protocol.hh:
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/miss/SConscript:
src/mem/cache/miss/mshr.cc:
src/mem/cache/miss/mshr.hh:
src/mem/cache/miss/mshr_queue.cc:
src/mem/cache/miss/mshr_queue.hh:
src/mem/cache/prefetch/base_prefetcher.cc:
src/mem/cache/tags/fa_lru.cc:
src/mem/cache/tags/fa_lru.hh:
src/mem/cache/tags/iic.cc:
src/mem/cache/tags/iic.hh:
src/mem/cache/tags/lru.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.cc:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.cc:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.cc:
src/mem/cache/tags/split_lru.hh:
src/mem/packet.cc:
src/mem/packet.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/tport.cc:
More major reorg. Seems to work for atomic mode now,
timing mode still broken.
--HG--
extra : convert_revision : 7e70dfc4a752393b911880ff028271433855ae87
|
|
using a divide in order to not loop forever after resuming from a checkpoint
--HG--
extra : convert_revision : 4bbc70b1be4e5c4ed99d4f88418ab620d5ce475a
|
|
--HG--
extra : convert_revision : 832e52ba80cbab2f5bb6d5b5977a499d41b4d638
|
|
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
configs/common/FSConfig.py:
src/mem/bridge.cc:
src/mem/bridge.hh:
src/python/m5/objects/Bridge.py:
fix partial writes with a functional memory hack
src/mem/bus.cc:
src/mem/bus.hh:
src/python/m5/objects/Bus.py:
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached
src/mem/packet.cc:
fix WriteInvalidateResp to not be a request that needs a response since it isn't
src/mem/port.hh:
by default return 0 for deviceBlockSize instead of panicing. This makes finding the block size the bus should use easier
--HG--
extra : convert_revision : 3fcfe95f9f392ef76f324ee8bd1d7f6de95c1a64
|
|
deletePortRefs() is called on it with that port as a parameter.
In this way a MemoryObject can keep a functional port around and give it to anyone who wants to do functional accesses rather
than creating a new one each time.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/cache_impl.hh:
only keep around one func port we give to anyone who wants it. Otherwise we can run out of port ids reasonably quickly if
a lot of functional accesses are happening (e.g. remote debugging, dprintk, etc)
--HG--
extra : convert_revision : 6a9e3e96f51cedaab6de1b36cf317203899a3716
|
|
don't create a new physPort/virtPort every time activateContext() is called
add the ability to tell a memory object to delete it's reference to a port and a method to have a port call deletePortRefs()
on the port owner as well as delete it's peer
still need to stop calling connectMemoPorts() every time activateContext() is called or we'll overflow the bus id and panic
src/cpu/thread_state.cc:
if we hav ea (phys|virt)Port don't create a new on, have it delete it's peer and then reuse it
src/mem/bus.cc:
src/mem/bus.hh:
add ability to delete a port by usig a hash_map instead of an array to store port ids
add a function to do deleting
src/mem/cache/cache.hh:
src/mem/cache/cache_impl.hh:
src/mem/mem_object.cc:
src/mem/mem_object.hh:
adda function to delete port references from a memory object
src/mem/port.cc:
src/mem/port.hh:
add a removeConn function that tell the owener to delete any references to the port and then deletes its peer
--HG--
extra : convert_revision : 272f0c8f80e1cf1ab1750d8be5a6c9aa110b06a4
|
|
--HG--
extra : convert_revision : 41956c9a480163ecac7807982215027e8ff1a4a9
|
|
still use some work.
--HG--
extra : convert_revision : ba0a68bd378d68e4ebd80a101b965d36c8be1db9
|
