| Age | Commit message (Collapse) | Author |
|---|
|
This change is because I want to make CacheBlk::data private, so that
I can track all the places which write to it. But to keep that commit
smaller (it is pretty big, because of all the places which might
change it), I have split this into a commit of its own.
Change-Id: I15a2fc1752085ff3681f5c74ec90be3828a559ea
Reviewed-on: https://gem5-review.googlesource.com/11829
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Packet::checkFunctional also wrote data to/from the packet depending
on if it was read/write, respectively, which the 'check' in the name
would suggest otherwise. This renames it to doFunctional, which is
more suggestive. It also renames any function called checkFunctional
which calls Packet::checkFunctional. These are
- Bridge::BridgeMasterPort::checkFunctional
- calls Packet::checkFunctional
- MSHR::checkFunctional
- calls Packet::checkFunctional
- MSHR::TargetList::checkFunctional
- calls Packet::checkFunctional
- Queue<>::checkFunctional
(of src/mem/cache/queue.hh, not src/cpu/minor/buffers.h)
- Instantiated with Queue<WriteQueueEntry> and Queue<MSHR>
- WriteQueueEntry
- calls Packet::checkFunctional
- WriteQueueEntry::TargetList
- calls Packet::checkFunctional
- MemDelay::checkFunctional
- calls QueuedSlavePort/QueuedMasterPort::checkFunctional
- Packet::checkFunctional
- PacketQueue::checkFunctional
- calls Packet::checkFunctional
- QueuedSlavePort::checkFunctional
- calls PacketQueue::doFunctional
- QueuedMasterPort::checkFunctional
- calls PacketQueue::doFunctional
- SerialLink::SerialLinkMasterPort::checkFunctional
- calls Packet::doFunctional
Change-Id: Ieca2579c020c329040da053ba8e25820801b62c5
Reviewed-on: https://gem5-review.googlesource.com/11810
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The writebacks happen before anything below, not after.
Change-Id: I7eaefbbf33aa17c496255dedd964a56118a28741
Reviewed-on: https://gem5-review.googlesource.com/11749
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
While a cache clean operation is pending, all requests to the
corresponding block get deferred. When the response of a cache clean
operation is received, if the block is present and the response is not
invalidating, we can service all deferred targets that didn't require
writable. This change implements this functionality.
Change-Id: Ief47e74d07749a6a9736ab450eb46eefa53464a2
Reviewed-on: https://gem5-review.googlesource.com/11018
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
AtomicOpFunctor can be used to implement atomic memory operations.
AtomicOpFunctor is captured inside a memory request and executed directly
in the memory hierarchy in a single step.
This patch enables AtomicOpFunctor pointers to be included in a memory
request and executed in a single step in the classic cache system.
This patch also makes the copy constructor of Request class do a deep
copy of AtomicOpFunctor object. This prevents a copy of a Request object
from accessing a deleted AtomicOpFunctor object.
Change-Id: I6649532b37f711e55f4552ad26893efeb300dd37
Reviewed-on: https://gem5-review.googlesource.com/8185
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
When a block is being replaced in an allocation, if successfull,
the block will be inserted. Therefore we move the insertion
functionality to allocateBlock().
allocateBlock's signature has been modified to allow this
modification.
Change-Id: I60d17a83ff4f3021fdc976378868ccde6c7507bc
Reviewed-on: https://gem5-review.googlesource.com/10812
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.
Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Change tag to address check for compatibility with sector design.
Cache should not use tag, as sector sub-blocks share them, and
it could lead to wrong accesses.
Change-Id: Id1fa26f417595f475c5b5c07ae1f02f5fa0684ba
Reviewed-on: https://gem5-review.googlesource.com/10723
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Sector caches must know if there was a sector hit in order
to decide whether a victim's sector must be fully evicted
to give place to a new sector or not.
In order to do so it needs the tag and secure information.
Change-Id: Ib554169e25fa131d6bf986561f7970b787c56874
Reviewed-on: https://gem5-review.googlesource.com/10722
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
For both sector and compressed caches multiple blocks may need
to be evicted in order to make room for a new block.
For example, when replacing a sector, all the blocks in this
sector must be evicted. A replacement, however, does not always
need to evict multiple blocks, as it is in the case of an
insertion of a block whose sector is already present in the cache
(i.e., its corresponding entry in the sector had not been brought
in yet, so it was invalid).
This patch creates the cache framework for that to happen.
Change-Id: I77bedf69637cf899fef4d9432eb6da8529ea398b
Reviewed-on: https://gem5-review.googlesource.com/10142
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
tempBlock has its member variables manually set in order to allow
it to be used in the block address regeneration function. This is
not necessary, and ti can be simply given the address, so it does
not need to be aware of set and tag. This will simplify
implementation of sector and skewed caches.
Change-Id: Iaffb10c323509722cd5589fe1030b818d43336d6
Reviewed-on: https://gem5-review.googlesource.com/9961
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Secure bit was being updated outside insertion.
Change-Id: I83d9b010e8cf64013bbea9bae3ea68b0c414a189
Reviewed-on: https://gem5-review.googlesource.com/10622
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This change modifies forEachBlk tags function to accept std::function
as parameter. It also adds an anyBlk tags function that given a
condition, it iterates through the blocks and returns whether the
condition is met.
Finally, it uses forEachBlk to implement the print, computeStats and
cleanupRefs functions that also work for the FALRU class.
Change-Id: I2f75f4baa1fdd5a1d343a63ecace3eb9458fbf03
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10621
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Cache bypass is necessary for cpu models like the KvmCPU. Previously
the bypass would happen at the cache classes. With this change the
bypassing happens directly at the ports.
Change-Id: I34de9fc63383aee8590643e169501ea6060d2d62
Reviewed-on: https://gem5-review.googlesource.com/10432
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch changes what goes into the BaseCache and what goes into the
Cache, to make it easier to add a NoncoherentCache with as much re-use
as possible. A number of redundant members and definitions are also
removed in the process.
This is a modified version of a changeset put together by Andreas
Hansson <andreas.hansson@arm.com>
Change-Id: Ie9dd73c4ec07732e778e7416b712dad8b4bd5d4b
Reviewed-on: https://gem5-review.googlesource.com/10431
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I25dbcfcddfe1c422a76eb1af3f726c1360d8d110
Reviewed-on: https://gem5-review.googlesource.com/10426
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Replacement policies (LRU, Random) are currently considered as array
indexing methods, but have completely different functionalities:
- Array indexers determine the possible locations for block allocation.
This information is used to generate replacement candidates when
conflicts happen.
- Replacement policies determine which of the replacement candidates
should be evicted to make room for new allocations.
For this reason, they were split into different classes. Advantages:
- Easier and more straightforward to implement other replacement
policies (RRIP, LFU, ARC, ...)
- Allow easier future implementation of cache organization schemes
As now we can't assure the use of sets, the previous way to create a
true LRU is not viable. Now a timestamp_bits parameter controls how
many bits are dedicated for the timestamp, and a true LRU can be
achieved through an infinite number of bits (although a few bits suffice
in practice).
Change-Id: I23750db121f1474d17831137e6ff618beb2b3eda
Reviewed-on: https://gem5-review.googlesource.com/8501
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
NOTE: With this change there is a possibility for `DRAMCtrl::Rank`s
event names to not properly match the rank they were generated by. This
could occur if the public rank member is modified after the Rank's
construction. A patch would mean refactoring Rank and `DRAMCtrl`b to
privatize many of the members of Rank behind getters.
Change-Id: I7b8bd15086f4ffdfd3f40be4aeddac5e786fd78e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3745
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
If the cache access mode is parallel, i.e. "sequential_access" parameter
is set to "False", tags and data are accessed in parallel. Therefore,
the hit_latency is the maximum latency between tag_latency and
data_latency. On the other hand, if the cache access mode is
sequential, i.e. "sequential_access" parameter is set to "True",
tags and data are accessed sequentially. Therefore, the hit_latency
is the sum of tag_latency plus data_latency.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
We want to extend the stats of objects hierarchically and thus it is necessary
to register the statistics of the base-class(es), as well. For now, these are
empty, but generic stats will be added there.
Patch originally provided by Akash Bagdia at ARM Ltd.
|
|
Change-Id: Ia57cc104978861ab342720654e408dbbfcbe4b69
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I5042410be54935650b7d05c84d8d9efbfcc06e70
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I6d1feb164a958dde0da87a1cd2698096112c4a82
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Somehow the WriteLineReq were never added to the list of commands
considered demand.
|
|
Prune cache stats that are never actually used.
|
|
Added stat to the cache to account for HardPF'ed blocks that are evicted
before being referenced (over-prefetching).
|
|
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
* * *
mem: Adjust cache queue reserve to more conservative values
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
|
|
This patch breaks out the cache write buffer into a separate class,
without affecting any stats. The goal of the patch is to avoid
encumbering the much-simpler write queue with the complex MSHR
handling. In a follow on patch this simplification allows us to
implement write combining.
The WriteQueue gets its own class, but shares a common ancestor, the
generic Queue, with the MSHRQueue.
|
|
This patch changes how the cache determines if snoops should be
forwarded from the memory side to the CPU side. Instead of having a
parameter, the cache now looks at the port connected on the CPU side,
and if it is a snooping port, then snoops are forwarded. Less error
prone, and less parameters to worry about.
The patch also tidies up the CPU classes to ensure that their I-side
port is not snooping by removing overrides to the snoop request
handler, such that snoop requests will panic via the default
MasterPort implement
|
|
Open up for other subclasses to BaseCache and transition to using the
explicit Cache subclass.
--HG--
rename : src/mem/cache/BaseCache.py => src/mem/cache/Cache.py
|
|
Draining is currently done by traversing the SimObject graph and
calling drain()/drainResume() on the SimObjects. This is not ideal
when non-SimObjects (e.g., ports) need draining since this means that
SimObjects owning those objects need to be aware of this.
This changeset moves the responsibility for finding objects that need
draining from SimObjects and the Python-side of the simulator to the
DrainManager. The DrainManager now maintains a set of all objects that
need draining. To reduce the overhead in classes owning non-SimObjects
that need draining, objects inheriting from Drainable now
automatically register with the DrainManager. If such an object is
destroyed, it is automatically unregistered. This means that drain()
and drainResume() should never be called directly on a Drainable
object.
While implementing the new functionality, the DrainManager has now
been made thread safe. In practice, this means that it takes a lock
whenever it manipulates the set of Drainable objects since SimObjects
in different threads may create Drainable objects
dynamically. Similarly, the drain counter is now an atomic_uint, which
ensures that it is manipulated correctly when objects signal that they
are done draining.
A nice side effect of these changes is that it makes the drain state
changes stricter, which the simulation scripts can exploit to avoid
redundant drains.
|
|
The drain state enum is currently a part of the Drainable
interface. The same state machine will be used by the DrainManager to
identify the global state of the simulator. Make the drain state a
global typed enum to better cater for this usage scenario.
|
|
This patch takes the final step in removing the is_top_level parameter
from the cache. With the recent changes to read requests and write
invalidations, the parameter is no longer needed, and consequently
removed.
This also means that asymmetric cache hierarchies are now fully
supported (and we are actually using them already with L1 caches, but
no table-walker caches, connected to a shared L2).
|
|
This patch adds two new read requests packets:
ReadCleanReq - For a cache to explicitly request clean data. The
response is thus exclusive or shared, but not owned or modified. The
read-only caches (see previous patch) use this request type to ensure
they do not get dirty data.
ReadSharedReq - We add this to distinguish cache read requests from
those issued by other masters, such as devices and CPUs. Thus, devices
use ReadReq, and caches use ReadCleanReq, ReadExReq, or
ReadSharedReq. For the latter, the response can be any state, shared,
exclusive, owned or even modified.
Both ReadCleanReq and ReadSharedReq re-use the normal ReadResp. The
two transactions are aligned with the emerging cache-coherent TLM
standard and the AMBA nomenclature.
With this change, the normal ReadReq should never be used by a cache,
and is reserved for the actual (non-caching) masters in the system. We
thus have a way of identifying if a request came from a cache or
not. The introduction of ReadSharedReq thus removes the need for the
current isTopLevel hack, and also allows us to stop relying on
checking the packet size to determine if the source is a cache or
not. This is fixed in follow-on patches.
|
|
This patch adds a parameter to the BaseCache to enable a read-only
cache, for example for the instruction cache, or table-walker cache
(not for x86). A number of checks are put in place in the code to
ensure a read-only cache does not end up with dirty data.
A follow-on patch adds suitable read requests to allow a read-only
cache to explicitly ask for clean data.
|
|
This patch takes a last step in fixing issues related to uncacheable
accesses. We do not separate uncacheable memory from uncacheable
devices, and in cases where it is really memory, there are valid
scenarios where we need to snoop since we do not support cache
maintenance instructions (yet). On snooping an uncacheable access we
thus provide data if possible. In essence this makes uncacheable
accesses IO coherent.
The snoop filter is also queried to steer the snoops, but not updated
since the uncacheable accesses do not allocate a block.
|
|
This patch changes the cache implementation to rely on virtual methods
rather than using the replacement policy as a template argument.
There is no impact on the simulation performance, and overall the
changes make it easier to modify (and subclass) the cache and/or
replacement policy.
|
|
Avoid redundant inclusion of the name in the DPRINTF string.
|
|
This patch fixes a long-standing isue with the port flow
control. Before this patch the retry mechanism was shared between all
different packet classes. As a result, a snoop response could get
stuck behind a request waiting for a retry, even if the send/recv
functions were split. This caused message-dependent deadlocks in
stress-test scenarios.
The patch splits the retry into one per packet (message) class. Thus,
sendTimingReq has a corresponding recvReqRetry, sendTimingResp has
recvRespRetry etc. Most of the changes to the code involve simply
clarifying what type of request a specific object was accepting.
The biggest change in functionality is in the cache downstream packet
queue, facing the memory. This queue was shared by requests and snoop
responses, and it is now split into two queues, each with their own
flow control, but the same physical MasterPort. These changes fixes
the previously seen deadlocks.
|
|
This patch adds some much-needed clarity in the specification of the
cache timing. For now, hit_latency and response_latency are kept as
top-level parameters, but the cache itself has a number of local
variables to better map the individual timing variables to different
behaviours (and sub-components).
The introduced variables are:
- lookupLatency: latency of tag lookup, occuring on any access
- forwardLatency: latency that occurs in case of outbound miss
- fillLatency: latency to fill a cache block
We keep the existing responseLatency
The forwardLatency is used by allocateInternalBuffer() for:
- MSHR allocateWriteBuffer (unchached write forwarded to WriteBuffer);
- MSHR allocateMissBuffer (cacheable miss in MSHR queue);
- MSHR allocateUncachedReadBuffer (unchached read allocated in MSHR
queue)
It is our assumption that the time for the above three buffers is the
same. Similarly, for snoop responses passing through the cache we use
forwardLatency.
|
|
Adds a new parameter that reserves some number of MSHR entries for demand
accesses. This helps prevent prefetchers from taking all MSHRs, forcing demand
requests from the CPU to stall.
|
|
Static analysis unearther a bunch of uninitialised variables and
members, and this patch addresses the problem. In all cases these
omissions seem benign in the end, but at least fixing them means less
false positives next time round.
|
|
Support full-block writes directly rather than requiring RMW:
* a cache line is allocated in the cache upon receipt of a
WriteInvalidateReq, not the WriteInvalidateResp.
* only top-level caches allocate the line; the others just pass
the request along and invalidate as necessary.
* to close a timing window between the *Req and the *Resp, a new
metadata bit tracks whether another cache has read a copy of
the new line before the writeback to memory.
|
|
This patch fixes a bug in the cache port where the retry flag was
reset too early, allowing new requests to arrive before the retry was
actually sent, but with the event already scheduled. This caused a
deadlock in the interactions with the O3 LSQ.
The patche fixes the underlying issue by shifting the resetting of the
flag to be done by the event that also calls sendRetry(). The patch
also tidies up the flow control in recvTimingReq and ensures that we
also check if we already have a retry outstanding.
|
|
this patch implements a new tags class that uses a random replacement policy.
these tags prefer to evict invalid blocks first, if none are available a
replacement candidate is chosen at random.
this patch factors out the common code in the LRU class and creates a new
abstract class: the BaseSetAssoc class. any set associative tag class must
implement the functionality related to the actual replacement policy in the
following methods:
accessBlock()
findVictim()
insertBlock()
invalidate()
|
|
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
|
|
This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.
Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.
A follow-on patch updates the configuration scripts accordingly.
|
|
This patch reorganizes the cache tags to allow more flexibility to
implement new replacement policies. The base tags class is now a
clocked object so that derived classes can use a clock if they need
one. Also having deriving from SimObject allows specialized Tag
classes to be swapped in/out in .py files.
The cache set is now templatized to allow it to contain customized
cache blocks with additional informaiton. This involved moving code to
the .hh file and removing cacheset.cc.
The statistics belonging to the cache tags are now including ".tags"
in their name. Hence, the stats need an update to reflect the change
in naming.
|
|
This patch removes the redundant cache builder class.
|
