| Age | Commit message (Collapse) | Author |
|---|
|
Change 8ba77ae8fc98a355082da2bd9fdc6ecf4928f725 introduced the
writebacks parameter, but it was never used.
Change-Id: I225e5b399de42d77c72fc0012d3dc93ef39b8853
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/14896
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Requests, for which a cache has already committed to respond do not
perform any lookups. Previously in atomic mode the packet would pay
the lookup latency while in timing it wouldn't. This patch aligns
recvAtomic with recvTimingReq and removes the lookup latency from the
the handling of such requests.
Change-Id: I50a0631f8058e5086d94d55af0e1788a60e2883f
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14175
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Move evictBlock(CacheBlk*, PacketList&) to base cache,
as it is both sub-classes implementations are equal.
Change-Id: I80fbd16813bfcc4938fb01ed76abe29b3f8b3018
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/13656
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Enable the cache to detect contiguous writes and hold on to the MSHR
long enough to allow the entire line to be written. If the whole line
is written, the MSHR will be sent out as an invalidation requests, as
it is part of a whole-line write, i.e. no-fetch-on-write.
The cache is also able to switch to a write-no-allocate policy on the
actual completion of the writes, and instead use the tempBlock and
turn the write operation into a writeback.
These policies are all well-known, and described in works such as
Jouppi, Cache Write Policies and Performance, vol 21, no 2, ACM, 1993.
Change-Id: I19792f2970b3c6798c9b2b493acdd156897284ae
Reviewed-on: https://gem5-review.googlesource.com/c/12907
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This patch changes how we deal with whole-line writes their
responses. With these changes, we use the MSHR tracking to determine
if a whole-line is written, and on a fill we simply handle the
invalidation response, with the actual writes taking place as part of
satisfying the CPU-side hit.
Change-Id: I9a18e41a95db3c20b97f8bca7d95ff33d35a578b
Reviewed-on: https://gem5-review.googlesource.com/c/12905
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Rename the files blk.cc and blk.hh to cache_blk.cc and cache_blk.hh
to comply with the usual file-class naming rules.
Change-Id: I8af45df3e4b8dd934fd9929ec914fb230cb2cb09
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/13416
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
"4976ff5 mem-cache: Refactor the recvAtomic function" introduced a bug
where if an atomic request that fills in using the tempBlock it will
not evict it when it finishes handling the request as it should. This
triggers an assertion. This change fixes this bug.
Change-Id: I73c808a7e15237eddb36b5448ef6728f7bcf7fd9
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12644
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
While a cache clean operation is pending, all requests to the
corresponding block get deferred. When the response of a cache clean
operation is received, if the block is present and the response is not
invalidating, we can service all deferred targets that didn't require
writable. This change implements this functionality.
Change-Id: Ief47e74d07749a6a9736ab450eb46eefa53464a2
Reviewed-on: https://gem5-review.googlesource.com/11018
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.
Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
tempBlock has its member variables manually set in order to allow
it to be used in the block address regeneration function. This is
not necessary, and ti can be simply given the address, so it does
not need to be aware of set and tag. This will simplify
implementation of sector and skewed caches.
Change-Id: Iaffb10c323509722cd5589fe1030b818d43336d6
Reviewed-on: https://gem5-review.googlesource.com/9961
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Secure bit was being updated outside insertion.
Change-Id: I83d9b010e8cf64013bbea9bae3ea68b0c414a189
Reviewed-on: https://gem5-review.googlesource.com/10622
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Cache bypass is necessary for cpu models like the KvmCPU. Previously
the bypass would happen at the cache classes. With this change the
bypassing happens directly at the ports.
Change-Id: I34de9fc63383aee8590643e169501ea6060d2d62
Reviewed-on: https://gem5-review.googlesource.com/10432
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch changes what goes into the BaseCache and what goes into the
Cache, to make it easier to add a NoncoherentCache with as much re-use
as possible. A number of redundant members and definitions are also
removed in the process.
This is a modified version of a changeset put together by Andreas
Hansson <andreas.hansson@arm.com>
Change-Id: Ie9dd73c4ec07732e778e7416b712dad8b4bd5d4b
Reviewed-on: https://gem5-review.googlesource.com/10431
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I2df24eb1a8516220bec9b685c8c09bf55be18681
Reviewed-on: https://gem5-review.googlesource.com/10430
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
For a block replacement we first select a victim block, we invalidate
it and then populate it with the new information. Prior to this change
BaseTags::insertBlock() did the invalidation and filled in the block
with the new information. Now that the replacements stat is moved to
the BaseCache, insertBlock does not need to perform the invalidation
and as a result we can unify the block eviction code in BaseCache.
Change-Id: I5bdf00b2dab2752ed2137ab7201ed1dc451333b3
Reviewed-on: https://gem5-review.googlesource.com/10429
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
The recvAtomic function in the cache handles atomic requests. Over
time, recvAtomic has grown in complexity and code size. This change
factors out some of its functionality in a separate functiona. The new
functions handles atomic requests that miss.
Change-Id: If77d2de1e3e802e1da37f889f68910e700c59209
Reviewed-on: https://gem5-review.googlesource.com/10425
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The recvTimingReq function in the cache handles timing requests. Over
time, recvTimingReq has grown in complexity and code size. This change
factors out some of its functionality in two separate functions. The
new functions handle timing requests that hit and timing requests that
miss separately.
Change-Id: I09902d648d7272f0f9ec2851fa6376f7305ba418
Reviewed-on: https://gem5-review.googlesource.com/10424
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The recvTimingResp function in the cache handles timing
responses. Over time, recvTimingResp has grown in complexity and code
size. This change factors out some of its functionality to a separate
function. The new function iterates through the in-service targets and
handles them accordingly.
Change-Id: I0ef28288640f6be1b30452b0664d32432e692ea6
Reviewed-on: https://gem5-review.googlesource.com/10423
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
To decide whether we allocate upon receiving a response we need to
determine if any of the currently serviced requests (non-deferred
targets) is comming from another cache. This change adds support for
tracking this information in the MSHR.
Change-Id: If1db93c12b6af5813b91b9d6b6e5e196d327f038
Reviewed-on: https://gem5-review.googlesource.com/10422
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I25dbcfcddfe1c422a76eb1af3f726c1360d8d110
Reviewed-on: https://gem5-review.googlesource.com/10426
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When we use the tempBlock to fill-in, we have to write it back and
invalidate it at the end of current transaction. This patch simplifies
the writeback flow by treating it as a regular writeback.
Change-Id: I257be7bbff211e2832ad001a4e991daf67704485
Reviewed-on: https://gem5-review.googlesource.com/10421
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Create a block insertion function to be used when inserting
blocks. This resets the number of references to 1 (the
insertion is taken into account), sets the insertion tick,
and set secure state.
Change-Id: Ifc34cbbd1c125207ce47912d188809221c7a157e
Reviewed-on: https://gem5-review.googlesource.com/9824
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Instead of using raw memcpy, use the proper writer functions
from the Packet class in Cache.
Fixed typos in comments of these functions.
Change-Id: I156a00989c6cbaa73763349006a37a18243d6ed4
Reviewed-on: https://gem5-review.googlesource.com/9661
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The recvTimingReq function in the cache always returns true. This
changeset removes the return value.
Change-Id: I00dddca65ee7224ecfa579ea5195c841dac02972
Reviewed-on: https://gem5-review.googlesource.com/8289
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
Replacement policies (LRU, Random) are currently considered as array
indexing methods, but have completely different functionalities:
- Array indexers determine the possible locations for block allocation.
This information is used to generate replacement candidates when
conflicts happen.
- Replacement policies determine which of the replacement candidates
should be evicted to make room for new allocations.
For this reason, they were split into different classes. Advantages:
- Easier and more straightforward to implement other replacement
policies (RRIP, LFU, ARC, ...)
- Allow easier future implementation of cache organization schemes
As now we can't assure the use of sets, the previous way to create a
true LRU is not viable. Now a timestamp_bits parameter controls how
many bits are dedicated for the timestamp, and a true LRU can be
achieved through an infinite number of bits (although a few bits suffice
in practice).
Change-Id: I23750db121f1474d17831137e6ff618beb2b3eda
Reviewed-on: https://gem5-review.googlesource.com/8501
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Block allocation can fail when there is an in-service MSHR that
operates on the victim block. This can happed due to:
* an upgrade operation: a request that needs a writable copy of the
block finds a shared (non-writable) copy of the block in the cache
and has allocates an MSHR for the pending upgrade operation, or
* a clean operation: a clean request finds a dirty copy of the block
and allocates an MSHR for the pending clean operation.
This changes relaxes an assertion to allow for the 2nd case (cache
clean operations).
Change-Id: Ib51482160b5f2b3702ed744b0eac2029d34bc9d4
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9021
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Skewed caches need to know the way to regenerate a block address.
Change-Id: I62c61ac9509eff2f37bad36862751956db7a6e40
Reviewed-on: https://gem5-review.googlesource.com/8782
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Writebacks write data to either an existing block or a newly allocated
block. In either case we need to populate the whenReady field of the
block which will determine when the new value can be used.
Change-Id: I5788fad0b8086a1be96714639bf6a9470b334926
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8285
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The secure bit should be set when we fill a block with data from a
secure location, as indicated by the packet that triggers the fill.
This patch fixes a bug in which the cache wouldn't populate the secure
bit when filling the temp block.
Change-Id: I95c706146449804ff42b205b25dd79750f3e882a
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8284
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
Change-Id: Ia9b825bcbb8d326705f74c15a93a88703153ba5a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8283
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
A writeclean packet writes a dirty block to the memory below and
therefore sets the dirty flag for the block when the memory below is a
cache. If the block was also marked as writable it can satisfy future
write requests without further requests/snoops. This can lead to
multiple copies of the same block marked as dirty which is not
allowed. This changeset clears the writable flag from the cleaned
block to prevent the cache from satisfying future write requests
without sending a downstream request.
Change-Id: I14d3c62fd33f81b1a8ba62374c8565ccab00a6fe
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/7821
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Exclusive caches use the tempBlock to fill for responses from a
downstream cache. The reason for this is that they only pass the block
to the cache above without keeping a copy. When all requests are
serviced the block is immediately invalidated unless it is dirty, in
which case it has to be written back to the memory below.
To avoid unnecessary writebacks, this changeset forces mostly
exclusive caches to issuse requests that can only fetch clean data
when possible.
Reported-by: Quereshi Muhammad Avais <avais@kaist.ac.kr>
Change-Id: I01b377563f5aa3e12d22f425a04db7c023071849
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5061
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
A clean packet request serving a cache maintenance operation (CMO)
visits all memories down to the specified xbar. The visited caches
invalidate their copy (if the CMO is invalidating) and if a dirty copy
is found a write packet writes the dirty data to the memory level
below the specified xbar. A response is send back when all the caches
are clean and/or invalidated and the specified xbar has seen the write
packet.
This patch adds the following functionality in the xbar:
1) Accounts for the cache clean requests that go through the xbar
2) Generates the cache clean response when both the cache clean
request and the corresponding writeclean packet has crossed the
destination xbar.
Previously transactions in the xbar were identified using the pointer
of the original request. Cache clean transactions comprise of two
different packets, the clean request and the writeclean, and therefore
have different request pointers. This patch adds support for custom
transaction IDs that by default take the value of the request pointer
but can be overriden by the contructor. This allows the clean request
and writeclean share the same id which the coherent xbar uses to
co-ordinate them and send the response in a timely manner.
Change-Id: I80db76386a1caded38dc66e6e18f930c3bb800ff
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5051
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This change adds support for maintenance operations (CMOs) in the
cache. The supported memory operations clean and/or invalidate a cache
block as specified by its VA to the specified xbar (PoU, PoC).
A cache maintenance packet visits all memories down to the specified
xbar. Caches need to invalidate their copy if it is an invalidating
CMO. If it is (additionally) a cleaning CMO and a dirty copy exists,
the cache cleans it with a WriteClean request.
Change-Id: Ibf31daa7213925898f3408738b11b1dd76c90b79
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5049
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When a response indicates that there are no other sharers of the
block, the cache can promote its copy of the block to writable and
potential service deferred targets even if the request didn't ask for
a writable copy.
Previously, a response would guarantee the presence of the block in
the cache. A response could either be filling, upgrading or a response
to an invalidation due to a pending whole line write. Responses to
cache maintenance invalidations break this assumption. This change
adds an extra check to make sure that the block was already valid or
that the response is filling before promoting the block.
Change-Id: I6839f683a05d4dad4205c23f365a925b7b05e366
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5048
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Previously, WriteClean packets would always write to the first memory
below unless the memory was unable to allocate in which case it would
be forwarded further below.
This change adds support for specifying the destination of a
WriteClean packet. The cache annotates the request with the specified
destination and marks the packet as write-through upon its
creation. The coherent xbar checks packets for their destination and
resets the write-through flag when necessary e.g., the coherent xbar
that is set as the PoC will reset the write-through flag for packets
to the PoC.
Change-Id: I84b653f5cb6e46e97e09508649a3725d72d94606
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5046
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This change adds support for creating and handling WriteClean
packets. The WriteClean operation is almost identical to a
WritebackDirty with the exception that the cache generating a
WriteClean retains a copy of the block.
Change-Id: I63c8de62919fad0f9547d412f8266aa4292ebecd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5045
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This changeset adds support for checking whether the cache is
currently busy and a timing request would be rejected.
Change-Id: I5e37b011b2387b1fa1c9e687b9be545f06ffb5f5
Reviewed-on: https://gem5-review.googlesource.com/5042
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Request and Packet for squashed HWPrefetches were not deleted
Change-Id: I9b66bb01b8ed6a5ddfaaa8739a68165dc4a7006c
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4340
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
NOTE: With this change there is a possibility for `DRAMCtrl::Rank`s
event names to not properly match the rank they were generated by. This
could occur if the public rank member is modified after the Rank's
construction. A patch would mean refactoring Rank and `DRAMCtrl`b to
privatize many of the members of Rank behind getters.
Change-Id: I7b8bd15086f4ffdfd3f40be4aeddac5e786fd78e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3745
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I0ed4e528cb750a323facdc811dde7f0ed1ff228e
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
|
|
Change-Id: I79c2662fc81630ab321db8a75be6cd15fa07d372
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Policies like the LRU need to be notified when a block is invalidated,
the helper function does this along with invalidating the block.
Change-Id: I3ed59cf07938caa7f394ee6054b0af9e00b267ea
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Previously the writeback visitor would not consider and set the secure
flag for the blocks that are written back to memory. This patch fixes
this.
Change-Id: Ie1a425fa9211407a70a4343f2c6b3d073371378f
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Rather than having the 1st line on the Log line and every other line on its
own, add a new line to have a common format for all of them. Makes parsing
a lot easier.
Reviewed at http://reviews.gem5.org/r/3808/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Previously when an InvalidateReq snooped a cache with a dirty block or
a pending modified MSHR, it would invalidate the block or set the
postInv flag. The cache would not send an InvalidateResp. though,
causing memory order violations. This patches changes this behavior,
making the cache with the dirty block or pending modified MSHR the
ordering point.
Change-Id: Ib4c31012f4f6693ffb137cd77258b160fbc239ca
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
|
|
Previously an MSHR with one or more invalidating targets would first
service all targets in the MSHR TargetList and then invalidate the
block. As a result any service snooping targets would lookup in the
cache and incorrectly find the block. This patch forces the
invalidation to happen when the first invalidating target is
encountered.
Change-Id: I9df15de24e1d351cd96f5a2c424d9a03d81c2cce
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
|
|
This patch changes an assertion that previously assumed that a non
invalidating snoop request should never be serviced by an
InvalidateReq MSHR. The MSHR serves as the ordering point for the
snooping packet. When the InvalidateResp reaches the cache the
snooping packet snoops the caches above to find the requested
block. One or more of the caches above will have the block since
earlier it has seen a WriteLineReq.
Change-Id: I0c147c8b5d5019e18bd34adf9af0fccfe431ae07
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
|
