summaryrefslogtreecommitdiff
path: root/src/mem/noncoherent_bus.hh
AgeCommit message (Collapse)Author
2013-07-18mem: Set the cache line size on a system levelAndreas Hansson
This patch removes the notion of a peer block size and instead sets the cache line size on the system level. Previously the size was set per cache, and communicated through the interconnect. There were plenty checks to ensure that everyone had the same size specified, and these checks are now removed. Another benefit that is not yet harnessed is that the cache line size is now known at construction time, rather than after the port binding. Hence, the block size can be locally stored and does not have to be queried every time it is used. A follow-on patch updates the configuration scripts accordingly.
2013-05-30mem: Make the buses multi layeredAndreas Hansson
This patch makes the buses multi layered, and effectively creates a crossbar structure with distributed contention ports at the destination ports. Before this patch, a bus could have a single request, response and snoop response in flight at any time, and with these changes there can be as many requests as connected slaves (bus master ports), and as many responses as connected masters (bus slave ports). Together with address interleaving, this patch enables us to create high-throughput memory interconnects, e.g. 50+ GByte/s.
2013-05-30mem: Add basic stats to the busesUri Wiener
This patch adds a basic set of stats which are hard to impossible to implement using only communication monitors, and are needed for insight such as bus utilization, transactions through the bus etc. Stats added include throughput and transaction distribution, and also a two-dimensional vector capturing how many packets and how much data is exchanged between the masters and slaves connected to the bus.
2013-03-26mem: Separate waiting for the bus and waiting for a peerAndreas Hansson
This patch splits the retryList into a list of ports that are waiting for the bus itself to become available, and a map that tracks the ports where forwarding failed due to a peer not accepting the packet. Thus, when a retry reaches the bus, it can be sent to the appropriate port that initiated that transaction. As a consequence of this patch, only ports that are really ready to go will get a retry, thus reducing the amount of redundant failed attempts. This patch also makes it easier to reason about the order of servicing requests as the ports waiting for the bus are now clearly FIFO and much easier to change if desired.
2013-02-19sim: Make clock private and access using clockPeriod()Andreas Hansson
This patch makes the clock member private to the ClockedObject and forces all children to access it using clockPeriod(). This makes it impossible to inadvertently change the clock, and also makes it easier to transition to a situation where the clock is derived from e.g. a clock domain, or through a multiplier.
2012-11-02sim: Move the draining interface into a separate base classAndreas Sandberg
This patch moves the draining interface from SimObject to a separate class that can be used by any object needing draining. However, objects not visible to the Python code (i.e., objects not deriving from SimObject) still depend on their parents informing them when to drain. This patch also gets rid of the CountedDrainEvent (which isn't really an event) and replaces it with a DrainManager.
2012-10-11Mem: Determine bus block size during initialisationAndreas Hansson
This patch moves the block size computation from findBlockSize to initialisation time, once all the neighbouring ports are connected. There is no need to dynamically update the block size, and the caching of the value effectively avoided that anyhow. This is very similar to what was already in place, just with a slightly leaner implementation.
2012-07-09Bus: Split the bus into separate request/response layersAndreas Hansson
This patch splits the existing buses into multiple layers. The non-coherent bus is split into a request and a response layer, and the coherent bus adds an additional layer for the snoop responses. The layer is modified to be templatised on the port type, such that the different layers can have retryLists with either master or slave ports. This patch also removes the dynamic cast from the retry, as previously promised when moving the recvRetry from the port base class to the master/slave port respectively. Overall, the split bus more closely reflects any modern on-chip bus and should be at step in the right direction. From this point, it would be reasonable straight forward to add separate layers (and thus contention points and arbitration) for each port and thus create a true crossbar. The regressions all produce the correct output, but have varying degrees of changes to their statistics. A separate patch will be pushed with the updates to the reference statistics.
2012-07-09Bus: Add a notion of layers to the busesAndreas Hansson
This patch moves all flow control, arbitration and state information into a bus layer. The layer is thus responsible for all the state transitions, and for keeping hold of the retry list. Consequently the layer is also responsible for the draining. With this change, the non-coherent and coherent bus are given a single layer to avoid changing any temporal behaviour, but the patch opens up for adding more layers.
2012-07-09Port: Make getAddrRanges constAndreas Hansson
This patch makes getAddrRanges const throughout the code base. There is no reason why it should not be, and making it const prevents adding any unintentional side-effects.
2012-06-29Bus: enable non/coherent buses sub-classesUri Wiener
This patch merely changes several methods to be virtual in order to enable non/coherent buses sub-classes.
2012-05-31Bus: Split the bus into a non-coherent and coherent busAndreas Hansson
This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh