summaryrefslogtreecommitdiff
path: root/src/mem/physical.cc
AgeCommit message (Collapse)Author
2013-05-30mem: Avoid explicitly zeroing the memory backing storeAndreas Hansson
This patch removes the explicit memset as it is redundant and causes the simulator to touch the entire space, forcing the host system to allocate the pages. Anonymous pages are mapped on the first access, and the page-fault handler is responsible for zeroing them. Thus, the pages are still zeroed, but we avoid touching the entire allocated space which enables us to use much larger memory sizes as long as not all the memory is actually used.
2013-03-01mem: Merge interleaved ranges when creating backing storeAndreas Hansson
This patch adds merging of interleaved ranges before creating the backing stores. The backing stores are always a contigous chunk of the address space, and with this patch it is possible to have interleaved memories in the system.
2013-01-07mem: Merge ranges that are part of the conf tableAndreas Hansson
This patch adds basic merging of address ranges when determining which address ranges should be reported in the configuration table. By performing this merging it is possible to distribute an address range across many memory channels (controllers). This is essential to enable address interleaving.
2013-01-07mem: Add interleaving bits to the address rangesAndreas Hansson
This patch adds support for interleaving bits for the address ranges. What was previously just a start and end address, now has an additional three fields, for the high bit, and number of bits to use for interleaving, and a match value to compare against. If the number of interleaving bits is set to zero it is effectively disabled. A number of convenience functions are added to the range to enquire about the interleaving, its granularity and the number of stripes it is part of.
2013-01-07base: Simplify the AddrRangeMap by removing unused codeAndreas Hansson
This patch cleans up the AddrRangeMap in preparation for the addition of interleaving by removing unused code. The non-const editions of find are never used, and hence the duplication is not needed.
2013-01-07base: Encapsulate the underlying fields in AddrRangeAndreas Hansson
This patch makes the start and end address private in a move to prevent direct manipulation and matching of ranges based on these fields. This is done so that a transition to ranges with interleaving support is possible. As a result of hiding the start and end, a number of member functions are needed to perform the comparisons and manipulations that previously took place directly on the members. An accessor function is provided for the start address, and a function is added to test if an address is within a range. As a result of the latter the != and == operator is also removed in favour of the member function. A member function that returns a string representation is also created to allow debug printing. In general, this patch does not add any functionality, but it does take us closer to a situation where interleaving (and more cleverness) can be added under the bonnet without exposing it to the user. More on that in a later patch.
2013-01-07mem: Remove the joining of neighbouring rangesAndreas Hansson
This patch temporarily removes the joining of ranges when creating the backing store, to reserve this functionality for the interleaved ranges that are about to be introduced. When creating the mmaps for the backing store, there is no point in creating larger contigous chunks that what is necessary. The larger chunks will only make life more difficult for the host. Merging will be re-added later, but then only for interleaved ranges.
2013-01-07mem: Fix a bug in the memory serialization file namingAndreas Hansson
This patch fixes a bug that caused multiple systems to overwrite each other physical memory. The system name is now included in the filename such that this is avoided.
2012-11-16sim: have a curTick per eventqNilay Vaish
This patch adds a _curTick variable to an eventq. This variable is updated whenever an event is serviced in function serviceOne(), or all events upto a particular time are processed in function serviceEvents(). This change helps when there are eventqs that do not make use of curTick for scheduling events.
2012-10-15Mem: Separate the host and guest views of memory backing storeAndreas Hansson
This patch moves all the memory backing store operations from the independent memory controllers to the global physical memory. The main reason for this patch is to allow address striping in a future set of patches, but at this point it already provides some useful functionality in that it is now possible to change the number of memory controllers and their address mapping in combination with checkpointing. Thus, the host and guest view of the memory backing store are now completely separate. With this patch, the individual memory controllers are far simpler as all responsibility for serializing/unserializing is moved to the physical memory. Currently, the functionality is more or less moved from AbstractMemory to PhysicalMemory without any major changes. However, in a future patch the physical memory will also resolve any ranges that are interleaved and properly assign the backing store to the memory controllers, and keep the host memory as a single contigous chunk per address range. Functionality for future extensions which involve CPU virtualization also enable the host to get pointers to the backing store.
2012-09-19AddrRange: Transition from Range<T> to AddrRangeAndreas Hansson
This patch takes the final plunge and transitions from the templated Range class to the more specific AddrRange. In doing so it changes the obvious Range<Addr> to AddrRange, and also bumps the range_map to be AddrRangeMap. In addition to the obvious changes, including the removal of redundant includes, this patch also does some house keeping in preparing for the introduction of address interleaving support in the ranges. The Range class is also stripped of all the functionality that is never used. --HG-- rename : src/base/range.hh => src/base/addr_range.hh rename : src/base/range_map.hh => src/base/addr_range_map.hh
2012-04-06MEM: Enable multiple distributed generalized memoriesAndreas Hansson
This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-03-30Ruby: Remove the physMemPort and instead access memory directlyAndreas Hansson
This patch removes the physMemPort from the RubySequencer and instead uses the system pointer to access the physmem. The system already keeps track of the physmem and the valid memory address ranges, and with this patch we merely make use of that existing functionality. The memory is modified so that it is possible to call the access functions (atomic and functional) without going through the port, and the memory is allowed to be unconnected, i.e. have no ports (since Ruby does not attach it like the conventional memory system).
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-03-22MEM: Split SimpleTimingPort into PacketQueue and portsAndreas Hansson
This patch decouples the queueing and the port interactions to simplify the introduction of the master and slave ports. By separating the queueing functionality from the port itself, it becomes much easier to distinguish between master and slave ports, and still retain the queueing ability for both (without code duplication). As part of the split into a PacketQueue and a port, there is now also a hierarchy of two port classes, QueuedPort and SimpleTimingPort. The QueuedPort is useful for ports that want to leave the packet transmission of outgoing packets to the queue and is used by both master and slave ports. The SimpleTimingPort inherits from the QueuedPort and adds the implemention of recvTiming and recvFunctional through recvAtomic. The PioPort and MessagePort are cleaned up as part of the changes. --HG-- rename : src/mem/tport.cc => src/mem/packet_queue.cc rename : src/mem/tport.hh => src/mem/packet_queue.hh
2012-02-24MEM: Move port creation to the memory object(s) constructionAndreas Hansson
This patch moves all port creation from the getPort method to be consistently done in the MemObject's constructor. This is possible thanks to the Swig interface passing the length of the vector ports. Previously there was a mix of: 1) creating the ports as members (at object construction time) and using getPort for the name resolution, or 2) dynamically creating the ports in the getPort call. This is now uniform. Furthermore, objects that would not be complete without a port have these ports as members rather than having pointers to dynamically allocated ports. This patch also enables an elaboration-time enumeration of all the ports in the system which can be used to determine the masterId.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-25Mem: Add simple bandwidth stats to PhysicalMemoryAli Saidi
2012-01-17MEM: Remove the functional ports from the memory systemWilliam Wang
The functional ports are no longer used and this patch cleans up the legacy that is still present in buses, memories, CPUs etc. Note that this does not refer to the class FunctionalPort (already removed), but rather ports with the name (and use) functional.
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-07Merge with the main repository again.Gabe Black
2011-12-01physmem: Improved fatal message for size mismatchBrad Beckmann
--HG-- extra : rebase_source : 16da1c63263f8fd6fef9a842c577343cd6246a35
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-06-08Mem: Use sysconf to get the page size instead of the PAGE_SIZE macro.Gabe Black
2011-04-15trace: reimplement the DTRACE function so it doesn't use a vectorNathan Binkert
At the same time, rename the trace flags to debug flags since they have broader usage than simply tracing. This means that --trace-flags is now --debug-flags and --trace-help is now --debug-help
2011-04-15includes: sort all includesNathan Binkert
2011-03-01Spelling: Fix the a spelling error by changing mmaped to mmapped.Gabe Black
There may not be a formally correct spelling for the past tense of mmap, but mmapped is the spelling Google doesn't try to autocorrect. This makes sense because it mirrors the past tense of map->mapped and not the past tense of cape->caped. --HG-- rename : src/arch/alpha/mmaped_ipr.hh => src/arch/alpha/mmapped_ipr.hh rename : src/arch/arm/mmaped_ipr.hh => src/arch/arm/mmapped_ipr.hh rename : src/arch/mips/mmaped_ipr.hh => src/arch/mips/mmapped_ipr.hh rename : src/arch/power/mmaped_ipr.hh => src/arch/power/mmapped_ipr.hh rename : src/arch/sparc/mmaped_ipr.hh => src/arch/sparc/mmapped_ipr.hh rename : src/arch/x86/mmaped_ipr.hh => src/arch/x86/mmapped_ipr.hh
2011-02-23Mem: Print out memory when access > 8 bytesAli Saidi
2011-02-23Includes: Don't include isa_traits.hh and use the TheISA namespace unless ↵Ali Saidi
really needed.
2010-11-19SE: Fix simulating more than 4GB of RAM in SE modeAli Saidi
This change removes some dead code in PhysicalMemory, uses a 64 bit type for the page pointer in System (instead of 32 bit) and cleans up some style.
2010-11-08ARM: Add checkpointing supportAli Saidi
2010-11-08Mem: Finish half-baked support for mmaping file in physmem.Ali Saidi
Physmem has a parameter to be able to mem map a file, however it isn't actually used. This changeset utilizes the parameter so a file can be mmapped.
2010-01-19util: do checkpoint aggregation more cleanly, fix last changeset.Lisa Hsu
1) Move alpha-specific code out of page_table.cc:serialize(). 2) Begin serializing M5_pid and unserializing it, but adding an function to do optional paramIn so that old checkpoints don't need to be fixed up. 3) Fix up alpha startup code so that the unserialized M5_pid value is properly written to DTB_IPR_ASN. 4) Fix the memory unserialize that I forgot somehow in the last changeset. 5) Add in an agg_se.py to handle aggregated checkpoints. --bench foo-bar plus positional arguments foo bar are the only changes in usage from se.py. Note this aggregation stuff has only been tested for Alpha and nothing else, though it should take a very minimal amount of work to get it to work with another ISA.
2009-11-04build: fix compile problems pointed out by gcc 4.4Nathan Binkert
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-08-01Fix setting of INST_FETCH flag for O3 CPU.Steve Reinhardt
It's still broken in inorder. Also enhance DPRINTFs in cache and physical memory so we can see more easily whether it's getting set or not.
2009-07-08Registers: Add a registers.hh file as an ISA switched header.Gabe Black
This file is for register indices, Num* constants, and register types. copyRegs and copyMiscRegs were moved to utility.hh and utility.cc. --HG-- rename : src/arch/alpha/regfile.hh => src/arch/alpha/registers.hh rename : src/arch/arm/regfile.hh => src/arch/arm/registers.hh rename : src/arch/mips/regfile.hh => src/arch/mips/registers.hh rename : src/arch/sparc/regfile.hh => src/arch/sparc/registers.hh rename : src/arch/x86/regfile.hh => src/arch/x86/registers.hh
2009-06-04types: clean up types, especially signed vs unsignedNathan Binkert
2009-05-17includes: sort includes againNathan Binkert
2009-05-17types: Move stuff for global types into src/base/types.hhNathan Binkert
--HG-- rename : src/sim/host.hh => src/base/types.hh
2009-04-19Mem: Change isLlsc to isLLSC.Gabe Black
2009-04-19Memory: Rename LOCKED for load locked store conditional to LLSC.Gabe Black
2008-11-02Add in Context IDs to the simulator. From now on, cpuId is almost never used,Lisa Hsu
the primary identifier for a hardware context should be contextId(). The concept of threads within a CPU remains, in the form of threadId() because sometimes you need to know which context within a cpu to manipulate.
2008-10-09eventq: convert all usage of events to use the new API.Nathan Binkert
For now, there is still a single global event queue, but this is necessary for making the steps towards a parallelized m5.
2008-06-15physmem: Add a null option to physical memory so it doesn't store data.Nathan Binkert
2008-04-10PhysicalMemory: Add parameter for variance in memory delay.Ali Saidi
--HG-- extra : convert_revision : b931472e81dedb650b7accb9061cb426f1c32e66
2008-01-02Additional comments and helper functions for PrintReq.Steve Reinhardt
--HG-- extra : convert_revision : 7eadf9b7db8c0289480f771271b6efe2400006d4
2008-01-02Add functional PrintReq command for memory-system debugging.Steve Reinhardt
--HG-- extra : convert_revision : 73b753e57c355b7e6873f047ddc8cb371c3136b7
2007-11-19Memory: Cache the physical memory start and size so we don't need a dynamic ↵Ali Saidi
cast on every access. --HG-- extra : convert_revision : d6c3e93718991e7b68248242c80d8e6ac637ac51
2007-11-14remove unnecessary debug messages I addedKorey Sewell
--HG-- extra : convert_revision : 5c23218fd1b899fa7fe42701f7cb2f6033f7a583