summaryrefslogtreecommitdiff
path: root/src/mem/port.hh
AgeCommit message (Collapse)Author
2014-10-16misc: Move AddrRangeList from port.hh to addr_range.hhAndreas Hansson
The new location seems like a better fit. The iterator typedefs are removed in favour of using C++11 auto.
2014-09-27mem: Provide better diagnostic for unconnected portCurtis Dunham
When _masterPort is null, a message to that effect is more helpful than a segfault.
2013-07-18mem: Set the cache line size on a system levelAndreas Hansson
This patch removes the notion of a peer block size and instead sets the cache line size on the system level. Previously the size was set per cache, and communicated through the interconnect. There were plenty checks to ensure that everyone had the same size specified, and these checks are now removed. Another benefit that is not yet harnessed is that the cache line size is now known at construction time, rather than after the port binding. Hence, the block size can be locally stored and does not have to be queried every time it is used. A follow-on patch updates the configuration scripts accordingly.
2013-05-30mem: Make returning snoop responses occupy response layerAndreas Hansson
This patch introduces a mirrored internal snoop port to facilitate easy addition of flow control for the snoop responses that are turned into normal responses on their return. To perform this, the slave ports of the coherent bus are wrapped in internal master ports that are passed as the source ports to the response layer in question. As a result of this patch, there is more contention for the response resources, and as such system performance will decrease slightly. A consequence of the mirrored internal port is that the port the bus tells to retry (the internal one) and the port actually retrying (the mirrored) one are not the same. Thus, the existing check in tryTiming is not longer correct. In fact, the test is redundant as the layer is only in the retry state while calling sendRetry on the waiting port, and if the latter does not immediately call the bus then the retry state is left. Consequently the check is removed.
2012-10-31mem: Fix typo in port commentsAndreas Hansson
This patch merely fixes a few typos in the port comments.
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-09-19AddrRange: Transition from Range<T> to AddrRangeAndreas Hansson
This patch takes the final plunge and transitions from the templated Range class to the more specific AddrRange. In doing so it changes the obvious Range<Addr> to AddrRange, and also bumps the range_map to be AddrRangeMap. In addition to the obvious changes, including the removal of redundant includes, this patch also does some house keeping in preparing for the introduction of address interleaving support in the ranges. The Range class is also stripped of all the functionality that is never used. --HG-- rename : src/base/range.hh => src/base/addr_range.hh rename : src/base/range_map.hh => src/base/addr_range_map.hh
2012-08-28Port: Stricter port bind/unbind semanticsAndreas Hansson
This patch tightens up the semantics around port binding and checks that the ports that are being bound are currently not connected, and similarly connected before unbind is called. The patch consequently also changes the order of the unbind and bind for the switching of CPUs to ensure that the rules are adhered to. Previously the ports would be "over-written" without any check. There are no changes in behaviour due to this patch, and the only place where the unbind functionality is used is in the CPU.
2012-08-15O3,ARM: fix some problems with drain/switchout functionality and add Drain ↵Anthony Gutierrez
DPRINTFs This patch fixes some problems with the drain/switchout functionality for the O3 cpu and for the ARM ISA and adds some useful debug print statements. This is an incremental fix as there are still a few bugs/mem leaks with the switchout code. Particularly when switching from an O3CPU to a TimingSimpleCPU. However, when switching from O3 to O3 cores with the ARM ISA I haven't encountered any more assertion failures; now the kernel will typically panic inside of simulation.
2012-07-09Port: Make getAddrRanges constAndreas Hansson
This patch makes getAddrRanges const throughout the code base. There is no reason why it should not be, and making it const prevents adding any unintentional side-effects.
2012-07-09Port: Add getAddrRanges to master port (asking slave port)Andreas Hansson
This patch adds getAddrRanges to the master port, and thus avoids going through getSlavePort to be able to ask the slave. Similar to the previous patch that added isSnooping to the SlavePort, this patch aims to introduce an additional level of hierarchy in the ports (base port being protocol-agnostic) and getSlave/MasterPort will return port pointers to these base classes. The function is named getAddrRanges also on the master port, but does nothing besides asking the connected slave port. The slave port, as before, has to provide an implementation and actually produce a list of address ranges. The initial design used the name getSlaveAddrRanges for the new function, but the more verbose name was later changed.
2012-07-09Port: Add isSnooping to slave port (asking master port)Andreas Hansson
This patch adds isSnooping to the slave port, and thus avoids going through getMasterPort to be able to ask the master. Over the course of the next few patches, all getMasterPort/getSlavePort in Port and MemObject are to be protocol agnostic, and the snooping is part of the protocol layer. The function is already present on the master port, where it is implemented by the module itself, e.g. a cache. On the slave side, it is merely asking the connected master port. The same name is used by both functions despite their difference in behaviour. The initial design used isMasterSnooping on the slave port side, but the more verbose function name was later changed.
2012-07-09Port: Move retry from port base class to Master/SlavePortAndreas Hansson
This patch is the last part of moving all protocol-related functionality out of the Port base class. All the send/recv functions are already moved, and the retry (which still governs all the timing transport functions) is the only part that remained in the base class. The only point where this currently causes a bit of inconvenience is in the bus where the retry list is global and holds Port pointers (not Master/SlavePort). This is about to change with the split into a request/response bus and will soon be removed anyway. The patch has no impact on any regressions.
2012-05-30Packet: Unify the use of PortID in packet and portAndreas Hansson
This patch removes the Packet::NodeID typedef and unifies it with the Port::PortId. The src and dest fields in the packet are used to hold a port id (e.g. in the bus), and thus the two should actually be the same. The typedef PortID is now global (in base/types.hh) and aligned with the ThreadID in terms of capitalisation and naming of the InvalidPortID constant. Before this patch, two flags were used for valid destination and source, rather than relying on a named value (InvalidPortID), and this is now redundant, as the src and dest field themselves are sufficient to tell whether the current value is a valid port identifier or not. Consequently, the VALID_SRC and VALID_DST are removed. As part of the cleaning up, a number of int parameters and local variables are updated to use PortID. Note that Ruby still has its own NodeID typedef. Furthermore, the MemObject getMaster/SlavePort still has an int idx parameter with a default value of -1 which should eventually change to PortID idx = InvalidPortID.
2012-05-01MEM: Separate requests and responses for timing accessesAndreas Hansson
This patch moves send/recvTiming and send/recvTimingSnoop from the Port base class to the MasterPort and SlavePort, and also splits them into separate member functions for requests and responses: send/recvTimingReq, send/recvTimingResp, and send/recvTimingSnoopReq, send/recvTimingSnoopResp. A master port sends requests and receives responses, and also receives snoop requests and sends snoop responses. A slave port has the reciprocal behaviour as it receives requests and sends responses, and sends snoop requests and receives snoop responses. For all MemObjects that have only master ports or slave ports (but not both), e.g. a CPU, or a PIO device, this patch merely adds more clarity to what kind of access is taking place. For example, a CPU port used to call sendTiming, and will now call sendTimingReq. Similarly, a response previously came back through recvTiming, which is now recvTimingResp. For the modules that have both master and slave ports, e.g. the bus, the behaviour was previously relying on branches based on pkt->isRequest(), and this is now replaced with a direct call to the apprioriate member function depending on the type of access. Please note that send/recvRetry is still shared by all the timing accessors and remains in the Port base class for now (to maintain the current bus functionality and avoid changing the statistics of all regressions). The packet queue is split into a MasterPort and SlavePort version to facilitate the use of the new timing accessors. All uses of the PacketQueue are updated accordingly. With this patch, the type of packet (request or response) is now well defined for each type of access, and asserts on pkt->isRequest() and pkt->isResponse() are now moved to the appropriate send member functions. It is also worth noting that sendTimingSnoopReq no longer returns a boolean, as the semantics do not alow snoop requests to be rejected or stalled. All these assumptions are now excplicitly part of the port interface itself.
2012-04-25MEM: Add the PortId type and a corresponding id field to PortAndreas Hansson
This patch introduces the PortId type, moves the definition of INVALID_PORT_ID to the Port class, and also gives every port an id to reflect the fact that each element in a vector port has an identifier/index. Previously the bus and Ruby testers (and potentially other users of the vector ports) added the id field in their port subclasses, and now this functionality is always present as it is moved to the base class.
2012-04-14MEM: Separate snoops and normal memory requests/responsesAndreas Hansson
This patch introduces port access methods that separates snoop request/responses from normal memory request/responses. The differentiation is made for functional, atomic and timing accesses and builds on the introduction of master and slave ports. Before the introduction of this patch, the packets belonging to the different phases of the protocol (request -> [forwarded snoop request -> snoop response]* -> response) all use the same port access functions, even though the snoop packets flow in the opposite direction to the normal packet. That is, a coherent master sends normal request and receives responses, but receives snoop requests and sends snoop responses (vice versa for the slave). These two distinct phases now use different access functions, as described below. Starting with the functional access, a master sends a request to a slave through sendFunctional, and the request packet is turned into a response before the call returns. In a system without cache coherence, this is all that is needed from the functional interface. For the cache-coherent scenario, a slave also sends snoop requests to coherent masters through sendFunctionalSnoop, with responses returned within the same packet pointer. This is currently used by the bus and caches, and the LSQ of the O3 CPU. The send/recvFunctional and send/recvFunctionalSnoop are moved from the Port super class to the appropriate subclass. Atomic accesses follow the same flow as functional accesses, with request being sent from master to slave through sendAtomic. In the case of cache-coherent ports, a slave can send snoop requests to a master through sendAtomicSnoop. Just as for the functional access methods, the atomic send and receive member functions are moved to the appropriate subclasses. The timing access methods are different from the functional and atomic in that requests and responses are separated in time and send/recvTiming are used for both directions. Hence, a master uses sendTiming to send a request to a slave, and a slave uses sendTiming to send a response back to a master, at a later point in time. Snoop requests and responses travel in the opposite direction, similar to what happens in functional and atomic accesses. With the introduction of this patch, it is possible to determine the direction of packets in the bus, and no longer necessary to look for both a master and a slave port with the requested port id. In contrast to the normal recvFunctional, recvAtomic and recvTiming that are pure virtual functions, the recvFunctionalSnoop, recvAtomicSnoop and recvTimingSnoop have a default implementation that calls panic. This is to allow non-coherent master and slave ports to not implement these functions.
2012-03-30MEM: Introduce the master/slave port sub-classes in C++William Wang
This patch introduces the notion of a master and slave port in the C++ code, thus bringing the previous classification from the Python classes into the corresponding simulation objects and memory objects. The patch enables us to classify behaviours into the two bins and add assumptions and enfore compliance, also simplifying the two interfaces. As a starting point, isSnooping is confined to a master port, and getAddrRanges to slave ports. More of these specilisations are to come in later patches. The getPort function is not getMasterPort and getSlavePort, and returns a port reference rather than a pointer as NULL would never be a valid return value. The default implementation of these two functions is placed in MemObject, and calls fatal. The one drawback with this specific patch is that it requires some code duplication, e.g. QueuedPort becomes QueuedMasterPort and QueuedSlavePort, and BusPort becomes BusMasterPort and BusSlavePort (avoiding multiple inheritance). With the later introduction of the port interfaces, moving the functionality outside the port itself, a lot of the duplicated code will disappear again.
2012-02-24MEM: Move all read/write blob functions from Port to PortProxyAndreas Hansson
This patch moves the readBlob/writeBlob/memsetBlob from the Port class to the PortProxy class, thus making a clear separation of the basic port functionality (recv/send functional/atomic/timing), and the higher-level functional accessors available on the port proxies. There are only a few places in the code base where the blob functions were used on ports, and they are all for peeking into the memory system without making a normal memory access (in the memtest, and the malta and tsunami pchip). The memtest also exemplifies how easy it is to create a non-translating proxy if desired. The malta and tsunami pchip used a slave port to perform a functional read, and this is now changed to rely on the physProxy of the system (to which they already have a pointer).
2012-01-17MEM: Separate queries for snooping and address rangesAndreas Hansson
This patch simplifies the address-range determination mechanism and also unifies the naming across ports and devices. It further splits the queries for determining if a port is snooping and what address ranges it responds to (aiming towards a separation of cache-maintenance ports and pure memory-mapped ports). Default behaviours are such that most ports do not have to define isSnooping, and master ports need not implement getAddrRanges.
2012-01-17MEM: Remove Port removeConn and MemObject deletePortRefsAndreas Hansson
Cleaning up and simplifying the ports and going towards a more strict elaboration-time creation and binding of the ports.
2012-01-17MEM: Remove the notion of the default portAndreas Hansson
This patch removes the default port and instead relies on the peer being set to NULL initially. The binding check (i.e. is a port connected or not) will eventually be moved to the init function of the modules.
2012-01-17MEM: Simplify ports by removing EventManagerAndreas Hansson
This patch removes the inheritance of EventManager from the ports and moves all responsibility for event queues to the owner. Eventually the event manager should be the interface block, which could either be the structural owner or a subblock like a LSQ in the O3 CPU for example.
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2009-06-04types: clean up types, especially signed vs unsignedNathan Binkert
2009-05-17includes: use base/types.hh not inttypes.h or stdint.hNathan Binkert
2008-10-09eventq: Major API change for the Event and EventQueue structures.Nathan Binkert
Since the early days of M5, an event needed to know which event queue it was on, and that data was required at the time of construction of the event object. In the future parallelized M5, this sort of requirement does not work well since the proper event queue will not always be known at the time of construction of an event. Now, events are created, and the EventQueue itself has the schedule function, e.g. eventq->schedule(event, when). To simplify the syntax, I created a class called EventManager which holds a pointer to an EventQueue and provides the schedule interface that is a proxy for the EventQueue. The intent is that objects that frequently schedule events can be derived from EventManager and then they have the schedule interface. SimObject and Port are examples of objects that will become EventManagers. The end result is that any SimObject can just call schedule(event, when) and it will just call that SimObject's eventq->schedule function. Of course, some objects may have more than one EventQueue, so this interface might not be perfect for those, but they should be relatively few.
2008-06-28Backed out changeset 94a7bb476fca: caused memory leak.Steve Reinhardt
2008-06-21Generate more useful error messages for unconnected ports.Steve Reinhardt
Force all non-default ports to provide a name and an owner in the constructor.
2008-06-15port: Clean up default port setup and port switchover code.Nathan Binkert
2008-01-02Add functional PrintReq command for memory-system debugging.Steve Reinhardt
--HG-- extra : convert_revision : 73b753e57c355b7e6873f047ddc8cb371c3136b7
2007-11-28Make ports that aren't connected to anything fail more gracefully.Gabe Black
--HG-- extra : convert_revision : 3803b28fb2fdfd729f01f1a44df2ae02ef83a2fc
2007-05-21Change getDeviceAddressRanges to use bool for snoop arg.Steve Reinhardt
--HG-- extra : convert_revision : 832e52ba80cbab2f5bb6d5b5977a499d41b4d638
2007-05-07fix partial writes with a functional memory hackAli Saidi
figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached configs/common/FSConfig.py: src/mem/bridge.cc: src/mem/bridge.hh: src/python/m5/objects/Bridge.py: fix partial writes with a functional memory hack src/mem/bus.cc: src/mem/bus.hh: src/python/m5/objects/Bus.py: figure out the block size from devices attached to the bus otherwise use a default block size when no devices that care are attached src/mem/packet.cc: fix WriteInvalidateResp to not be a request that needs a response since it isn't src/mem/port.hh: by default return 0 for deviceBlockSize instead of panicing. This makes finding the block size the bus should use easier --HG-- extra : convert_revision : 3fcfe95f9f392ef76f324ee8bd1d7f6de95c1a64
2007-03-09Two fixes:Kevin Lim
1. Make sure connectMemPorts() only gets called when the CPU's peer gets changed. This is done by making setPeer() virtual, and overriding it in the CPU's ports. When it gets called on a CPU's port (dcache specifically), it calls the normal setPeer() function, and also connectMemPorts(). 2. Consolidate redundant code that handles switching in a CPU. src/cpu/base.cc: Move common code of switching over peers to base CPU. src/cpu/base.hh: Move common code of switching over peers to BaseCPU. src/cpu/o3/cpu.cc: Add in function that updates thread context's ports. Also use updated function to takeOverFrom() in BaseCPU. This gets rid of some repeated code. src/cpu/o3/cpu.hh: Include function to update thread context's memory ports. src/cpu/o3/lsq.hh: Add function to dcache port that will update the memory ports upon getting a new peer. Also include a function that will tell the CPU to update those memory ports. src/cpu/o3/lsq_impl.hh: Add function that will update the memory ports upon getting a new peer. src/cpu/simple/atomic.cc: src/cpu/simple/timing.cc: Add function that will update thread context's memory ports upon getting a new peer. Also use the new BaseCPU's take over from function. src/cpu/simple/atomic.hh: Add in function (and dcache port) that will allow the dcache to update memory ports when it gets assigned a new peer. src/cpu/simple/timing.hh: Add function that will update thread context's memory ports upon getting a new peer. src/mem/port.hh: Make setPeer virtual so that other classes can override it. --HG-- extra : convert_revision : 2050f1241dd2e83875d281cfc5ad5c6c8705fdaf
2007-03-08stop m5 from leaking like a sieveAli Saidi
don't create a new physPort/virtPort every time activateContext() is called add the ability to tell a memory object to delete it's reference to a port and a method to have a port call deletePortRefs() on the port owner as well as delete it's peer still need to stop calling connectMemoPorts() every time activateContext() is called or we'll overflow the bus id and panic src/cpu/thread_state.cc: if we hav ea (phys|virt)Port don't create a new on, have it delete it's peer and then reuse it src/mem/bus.cc: src/mem/bus.hh: add ability to delete a port by usig a hash_map instead of an array to store port ids add a function to do deleting src/mem/cache/cache.hh: src/mem/cache/cache_impl.hh: src/mem/mem_object.cc: src/mem/mem_object.hh: adda function to delete port references from a memory object src/mem/port.cc: src/mem/port.hh: add a removeConn function that tell the owener to delete any references to the port and then deletes its peer --HG-- extra : convert_revision : 272f0c8f80e1cf1ab1750d8be5a6c9aa110b06a4
2007-02-07Make memory commands dense again to avoid cache stat table explosion.Steve Reinhardt
Created MemCmd class to wrap enum and provide handy methods to check attributes, convert to string/int, etc. --HG-- extra : convert_revision : 57f147ad893443e3a2040c6d5b4cdb1a8033930b
2007-01-26make our code a little more standards compliantAli Saidi
pretty close to compiling w/ suns compiler briefly: add dummy return after panic()/fatal() split out flags by compiler vendor include cstring and cmath where appropriate use std namespace for string ops SConstruct: Add code to detect compiler and choose cflags based on detected compiler Fix zlib check to work with suncc src/SConscript: split out flags by compiler vendor src/arch/sparc/isa/decoder.isa: use correct namespace for sqrt src/arch/sparc/isa/formats/basic.isa: add dummy return around panic src/arch/sparc/isa/formats/integerop.isa: use correct namespace for stringops src/arch/sparc/isa/includes.isa: include cstring and cmath where appropriate src/arch/sparc/isa_traits.hh: remove dangling comma src/arch/sparc/system.cc: dummy return to make sun cc front end happy src/arch/sparc/tlb.cc: src/base/compression/lzss_compression.cc: use std namespace for string ops src/arch/sparc/utility.hh: no reason to say something is unsigned unsigned int src/base/compression/null_compression.hh: dummy returns to for suncc front end src/base/cprintf.hh: use standard variadic argument syntax instead of gnuc specefic renaming src/base/hashmap.hh: don't need to define hash for suncc src/base/hostinfo.cc: need stdio.h for sprintf src/base/loader/object_file.cc: munmap is in std namespace not null src/base/misc.hh: use M5 generic noreturn macros use standard variadic macro __VA_ARGS__ src/base/pollevent.cc: we need file.h for file flags src/base/random.cc: mess with include files to make suncc happy src/base/remote_gdb.cc: malloc memory for function instead of having a non-constant in an array size src/base/statistics.hh: use std namespace for floor src/base/stats/text.cc: include math.h for rint (cmath won't work) src/base/time.cc: use suncc version of ctime_r src/base/time.hh: change macro to work with both gcc and suncc src/base/timebuf.hh: include cstring from memset and use std:: src/base/trace.hh: change variadic macros to be normal format src/cpu/SConscript: add dummy returns where appropriate src/cpu/activity.cc: include cstring for memset src/cpu/exetrace.hh: include cstring fro memcpy src/cpu/simple/base.hh: add dummy return for panic src/dev/baddev.cc: src/dev/pciconfigall.cc: src/dev/platform.cc: src/dev/sparc/t1000.cc: add dummy return where appropriate src/dev/ide_atareg.h: make define work for both gnuc and suncc src/dev/io_device.hh: add dummy returns where approirate src/dev/pcidev.hh: src/mem/cache/cache_impl.hh: src/mem/cache/miss/blocking_buffer.cc: src/mem/cache/tags/lru.hh: src/mem/cache/tags/split.hh: src/mem/cache/tags/split_lifo.hh: src/mem/cache/tags/split_lru.hh: src/mem/dram.cc: src/mem/packet.cc: src/mem/port.cc: include cstring for string ops src/dev/sparc/mm_disk.cc: add dummy return where appropriate include cstring for string ops src/mem/cache/miss/blocking_buffer.hh: src/mem/port.hh: Add dummy return where appropriate src/mem/cache/tags/iic.cc: cast hastSets to double for log() call src/mem/physical.cc: cast pmemAddr to char* for munmap src/sim/byteswap.hh: make define work for suncc and gnuc --HG-- extra : convert_revision : ef8a1f1064e43b6c39838a85c01aee4f795497bd
2006-10-31Ports now have a pointer to the MemObject that owns it (can be NULL).Kevin Lim
src/cpu/simple/atomic.hh: Port now takes in the MemObject that owns it. src/cpu/simple/timing.hh: Port now takes in MemObject that owns it. src/dev/io_device.cc: src/mem/bus.hh: Ports now take in the MemObject that owns it. src/mem/cache/base_cache.cc: Ports now take in the MemObject that own it. src/mem/port.hh: src/mem/tport.hh: Ports now optionally take in the MemObject that owns it. --HG-- extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
2006-10-20Use PacketPtr everywhereNathan Binkert
--HG-- extra : convert_revision : d9eb83ab77ffd2d725961f295b1733137e187711
2006-10-08Move away from using the statusChange function on snoops. Clean up snooping ↵Ron Dreslinski
code in general. --HG-- extra : convert_revision : 5a57bfd7742a212047fc32e8cae0dc602fdc915c
2006-08-30Move more common functionality into SimpleTimingPort,Steve Reinhardt
allowing derived classes to be simplified. --HG-- extra : convert_revision : c980d3aec5e6c044d8f41e96252726fe9a256605
2006-08-22Commiting a version of the multi-phase snoop atomic bus so people can see ↵Ron Dreslinski
the framework. Doesn't work, but also doesn't break uni-processor systems. Working on pulling out the changes in the cache so that it remains working. src/mem/bus.cc: Changes for multi-phase snoop Some code for registering snoop ranges (a version that compiles and runs, but does nothing) src/mem/bus.hh: Changes for multi-phase snoop src/mem/packet.hh: Flag for multi-phase snoop src/mem/port.hh: Status for multi-phase snoop --HG-- extra : convert_revision : 4c2e5263bba16e3bcf03aabe36ff45ec36de4720
2006-08-14Fix up doxygen.Steve Reinhardt
--HG-- rename : docs/footer.html => src/doxygen/footer.html rename : docs/stl.hh => src/doxygen/stl.hh extra : convert_revision : 2b2e5637930843c1be07deaa708fd4126213cda2
2006-06-25Allow ports to be created without a name.Kevin Lim
--HG-- extra : convert_revision : 26dad6853feaf4f68907aab902c54259281cac1c
2006-06-08add write/read functions that have endian conversions in themAli Saidi
when we get a virtual port delete it (even though delete does nothing in these cases) src/arch/alpha/linux/system.cc: src/arch/alpha/stacktrace.cc: src/base/remote_gdb.cc: src/cpu/simple_thread.cc: when we get a virtual port delete it (even though delete does nothing in this case) src/mem/port.hh: src/mem/vport.hh: add write/read functions that have endian conversions in them --HG-- extra : convert_revision : 163e05cc038c461f95c92f8ce55422033f9ea513
2006-05-31Updated Authors from bk prs infoAli Saidi
--HG-- extra : convert_revision : 77f475b156d81c03a2811818fa23593d5615c685
2006-05-30Minor further cleanup & commenting of Packet class.Steve Reinhardt
src/cpu/simple/atomic.cc: Make common ifetch setup based on Request rather than Packet. Packet::reset() no longer a separate function. sendAtomic() returns latency, not absolute tick. src/cpu/simple/atomic.hh: sendAtomic returns latency, not absolute tick. src/cpu/simple/base.cc: src/cpu/simple/base.hh: src/cpu/simple/timing.cc: Make common ifetch setup based on Request rather than Packet. src/dev/alpha_console.cc: src/dev/ide_ctrl.cc: src/dev/io_device.cc: src/dev/isa_fake.cc: src/dev/ns_gige.cc: src/dev/pciconfigall.cc: src/dev/sinic.cc: src/dev/tsunami_cchip.cc: src/dev/tsunami_io.cc: src/dev/tsunami_pchip.cc: src/dev/uart8250.cc: src/mem/physical.cc: Get rid of redundant Packet time field. src/mem/packet.cc: Eliminate reset() method. src/mem/packet.hh: Fold reset() function into reinitFromRequest()... it was only ever called together with that function. Get rid of redundant time field. Cleanup/add comments. src/mem/port.hh: Document in comment that sendAtomic returns latency, not absolute tick. --HG-- extra : convert_revision : 0252f1a294043ca3ed58f437232ad24fc0733e0c
2006-05-30Fix Port pointer initialization.Steve Reinhardt
src/mem/port.hh: Initialize peer port pointer to NULL. Move private data members together. --HG-- extra : convert_revision : dab01f81f0934758891a6b6dc2ad5328149d164b
2006-05-30Add a very poor implementation of dealing with retries on timing requests. ↵Ali Saidi
It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove possibility of packet mangling if packet is going to be refused anyway in bridge src/cpu/simple/atomic.cc: src/cpu/simple/atomic.hh: src/cpu/simple/timing.cc: src/cpu/simple/timing.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/dev/io_device.cc: src/dev/io_device.hh: Make DMA Timing requests/responses work. Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) src/mem/bridge.cc: src/mem/bridge.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Port Blocked/Unblocked and replaced with sendRetry(). Remove posibility of packet mangling if packet is going to be refused anyway. src/mem/bus.cc: src/mem/bus.hh: Add a very poor implementation of dealing with retries on timing requests. It is especially slow with tracing on since it ends up being O(N^2). But it's probably going to have to change for the real bus anyway, so it should be rewritten then src/mem/port.hh: Change recvRetry() to not accept a packet. Sendtiming should be called again (and can respond with false or true) Removed Blocked/Unblocked port status, their functionality is really duplicated in the recvRetry() method --HG-- extra : convert_revision : fab613404be54bfa7a4c67572bae7b559169e573