summaryrefslogtreecommitdiff
path: root/src/mem/ruby/system/Sequencer.hh
AgeCommit message (Collapse)Author
2019-05-12finally runs dhrystoneIru Cai
Change-Id: I7466a825f8726682622d237460311a1c4b23b8ad
2019-05-12only spec load when hitIru Cai
2019-03-20invisispec-1.0 sourceIru Cai
2017-07-12ruby: Refactor some Event subclasses to lambdasSean Wilson
Change-Id: I9f47a20a869553515a759d9a29c05f6ce4b42d64 Signed-off-by: Sean Wilson <spwilson2@wisc.edu> Reviewed-on: https://gem5-review.googlesource.com/3930 Maintainer: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2016-10-06ruby: rename ALPHA_Network_test protocol to Garnet_standalone.Tushar Krishna
Over the past 6 years, we realized that the protocol is essentially used to run the garnet network in a standalone manner, and feed standard synthetic traffic patterns through it.
2016-01-19gpu-compute: AMD's baseline GPU modelTony Gutierrez
2015-10-12misc: Remove redundant compiler-specific definesAndreas Hansson
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap (and similar) abstractions, as these are no longer needed with gcc 4.7 and clang 3.1 as minimum compiler versions.
2015-09-16ruby: remove unused function removeRequest()Nilay Vaish
2015-09-16ruby: sequencer: remove commented out function printProgress()Nilay Vaish
2015-08-14ruby: replace Address by AddrNilay Vaish
This patch eliminates the type Address defined by the ruby memory system. This memory system would now use the type Addr that is in use by the rest of the system.
2015-08-14ruby: Remove the RubyCache/CacheMemory latencyJoel Hestness
The RubyCache (CacheMemory) latency parameter is only used for top-level caches instantiated for Ruby coherence protocols. However, the top-level cache hit latency is assessed by the Sequencer as accesses flow through to the cache hierarchy. Further, protocol state machines should be enforcing these cache hit latencies, but RubyCaches do not expose their latency to any existng state machines through the SLICC/C++ interface. Thus, the RubyCache latency parameter is superfluous for all caches. This is confusing for users. As a step toward pushing L0/L1 cache hit latency into the top-level cache controllers, move their latencies out of the RubyCache declarations and over to their Sequencers. Eventually, these Sequencer parameters should be exposed as parameters to the top-level cache controllers, which should assess the latency. NOTE: Assessing these latencies in the cache controllers will require modifying each to eliminate instantaneous Ruby hit callbacks in transitions that finish accesses, which is likely a large undertaking.
2014-09-01ruby: move files from ruby/system to ruby/structuresNilay Vaish
The directory ruby/system is crowded and unorganized. Hence, the files the hold actual physical structures, are being moved to the directory ruby/structures. This includes Cache Memory, Directory Memory, Memory Controller, Wire Buffer, TBE Table, Perfect Cache Memory, Timer Table, Bank Array. The directory ruby/systems has the glue code that holds these structures together. --HG-- rename : src/mem/ruby/system/MachineID.hh => src/mem/ruby/common/MachineID.hh rename : src/mem/ruby/buffers/MessageBuffer.cc => src/mem/ruby/network/MessageBuffer.cc rename : src/mem/ruby/buffers/MessageBuffer.hh => src/mem/ruby/network/MessageBuffer.hh rename : src/mem/ruby/buffers/MessageBufferNode.cc => src/mem/ruby/network/MessageBufferNode.cc rename : src/mem/ruby/buffers/MessageBufferNode.hh => src/mem/ruby/network/MessageBufferNode.hh rename : src/mem/ruby/system/AbstractReplacementPolicy.hh => src/mem/ruby/structures/AbstractReplacementPolicy.hh rename : src/mem/ruby/system/BankedArray.cc => src/mem/ruby/structures/BankedArray.cc rename : src/mem/ruby/system/BankedArray.hh => src/mem/ruby/structures/BankedArray.hh rename : src/mem/ruby/system/Cache.py => src/mem/ruby/structures/Cache.py rename : src/mem/ruby/system/CacheMemory.cc => src/mem/ruby/structures/CacheMemory.cc rename : src/mem/ruby/system/CacheMemory.hh => src/mem/ruby/structures/CacheMemory.hh rename : src/mem/ruby/system/DirectoryMemory.cc => src/mem/ruby/structures/DirectoryMemory.cc rename : src/mem/ruby/system/DirectoryMemory.hh => src/mem/ruby/structures/DirectoryMemory.hh rename : src/mem/ruby/system/DirectoryMemory.py => src/mem/ruby/structures/DirectoryMemory.py rename : src/mem/ruby/system/LRUPolicy.hh => src/mem/ruby/structures/LRUPolicy.hh rename : src/mem/ruby/system/MemoryControl.cc => src/mem/ruby/structures/MemoryControl.cc rename : src/mem/ruby/system/MemoryControl.hh => src/mem/ruby/structures/MemoryControl.hh rename : src/mem/ruby/system/MemoryControl.py => src/mem/ruby/structures/MemoryControl.py rename : src/mem/ruby/system/MemoryNode.cc => src/mem/ruby/structures/MemoryNode.cc rename : src/mem/ruby/system/MemoryNode.hh => src/mem/ruby/structures/MemoryNode.hh rename : src/mem/ruby/system/MemoryVector.hh => src/mem/ruby/structures/MemoryVector.hh rename : src/mem/ruby/system/PerfectCacheMemory.hh => src/mem/ruby/structures/PerfectCacheMemory.hh rename : src/mem/ruby/system/PersistentTable.cc => src/mem/ruby/structures/PersistentTable.cc rename : src/mem/ruby/system/PersistentTable.hh => src/mem/ruby/structures/PersistentTable.hh rename : src/mem/ruby/system/PseudoLRUPolicy.hh => src/mem/ruby/structures/PseudoLRUPolicy.hh rename : src/mem/ruby/system/RubyMemoryControl.cc => src/mem/ruby/structures/RubyMemoryControl.cc rename : src/mem/ruby/system/RubyMemoryControl.hh => src/mem/ruby/structures/RubyMemoryControl.hh rename : src/mem/ruby/system/RubyMemoryControl.py => src/mem/ruby/structures/RubyMemoryControl.py rename : src/mem/ruby/system/SparseMemory.cc => src/mem/ruby/structures/SparseMemory.cc rename : src/mem/ruby/system/SparseMemory.hh => src/mem/ruby/structures/SparseMemory.hh rename : src/mem/ruby/system/TBETable.hh => src/mem/ruby/structures/TBETable.hh rename : src/mem/ruby/system/TimerTable.cc => src/mem/ruby/structures/TimerTable.cc rename : src/mem/ruby/system/TimerTable.hh => src/mem/ruby/structures/TimerTable.hh rename : src/mem/ruby/system/WireBuffer.cc => src/mem/ruby/structures/WireBuffer.cc rename : src/mem/ruby/system/WireBuffer.hh => src/mem/ruby/structures/WireBuffer.hh rename : src/mem/ruby/system/WireBuffer.py => src/mem/ruby/structures/WireBuffer.py rename : src/mem/ruby/recorder/CacheRecorder.cc => src/mem/ruby/system/CacheRecorder.cc rename : src/mem/ruby/recorder/CacheRecorder.hh => src/mem/ruby/system/CacheRecorder.hh
2014-03-17ruby: remove some of the unnecessary codeNilay Vaish
2014-01-10ruby: move all statistics to stats.txt, eliminate ruby.statsNilay Vaish
2013-06-25ruby: profiler: lots of inter-related changesNilay Vaish
The patch started of with removing the global variables from the profiler for profiling the miss latency of requests made to the cache. The corrresponding histograms have been moved to the Sequencer. These are combined together when the histograms are printed. Separate histograms are now maintained for tracking latency of all requests together, of hits only and of misses only. A particular set of histograms used to use the type GenericMachineType defined in one of the protocol files. This patch removes this type. Now, everything that relied on this type would use MachineType instead. To do this, SLICC has been changed so that multiple machine types can be declared by a controller in its preamble.
2013-03-22ruby: keep histogram of outstanding requests in seqNilay Vaish
The histogram for tracking outstanding counts per cycle is maintained in the profiler. For a parallel implementation of the memory system, we need that this histogram is maintained locally. Hence it will now be kept in the sequencer itself. The resulting histograms will be merged when the stats are printed.
2013-02-28ruby: mesi coherence protocol: invalidate lockDibakar Gope ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
The MESI CMP directory coherence protocol, while transitioning from SM to IM, did not invalidate the lock that it might have taken on a cache line. This patch adds an action for doing so. The problem was found by Dibakar, but I was not happy with his proposed solution. So I implemented a different solution. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-02-10ruby: replace Time with Cycles (final patch in the series)Nilay Vaish
This patch is as of now the final patch in the series of patches that replace Time with Cycles.This patch further replaces Time with Cycles in Sequencer, Profiler, different protocols and related entities. Though Time has not been completely removed, the places where it is in use seem benign as of now.
2013-02-10ruby: Replace Time with Cycles in SequencerMessageNilay Vaish
2012-09-07Param: Transition to Cycles for relevant parametersAndreas Hansson
This patch is a first step to using Cycles as a parameter type. The main affected modules are the CPUs and the Ruby caches. There are definitely plenty more places that are affected, but this patch serves as a starting point to making the transition. An important part of this patch is to actually enable parameters to be specified as Param.Cycles which involves some changes to params.py.
2012-08-27Ruby: Remove RubyEventQueueNilay Vaish
This patch removes RubyEventQueue. Consumer objects now rely on RubySystem or themselves for scheduling events.
2012-07-12Ruby: remove config information from ruby.statsNilay Vaish
This patch removes printConfig() functions from all structures in Ruby. Most of the information is already part of config.ini, and where ever it is not, it would become in due course.
2012-07-10ruby: tag and data cache access supportJoel Hestness
Updates to Ruby to support statistics counting of cache accesses. This feature serves multiple purposes beyond simple stats collection. It provides the foundation for ruby to model the cache tag and data arrays as physical resources, as well as provide the necessary input data for McPAT power modeling.
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-23O3, Ruby: Forward invalidations from Ruby to O3 CPUNilay Vaish
This patch implements the functionality for forwarding invalidations and replacements from the L1 cache of the Ruby memory system to the O3 CPU. The implementation adds a list of ports to RubyPort. Whenever a replacement or an invalidation is performed, the L1 cache forwards this to all the ports, which is the LSQ in case of the O3 CPU.
2012-01-11Ruby: Resurrect Cache Warmup CapabilityNilay Vaish
This patch resurrects ruby's cache warmup capability. It essentially makes use of all the infrastructure that was added to the controllers, memories and the cache recorder.
2011-11-14Ruby: Process packet instead of RubyRequest in SequencerNilay Vaish
This patch changes the implementation of Ruby's recvTiming() function so that it pushes a packet in to the Sequencer instead of a RubyRequest. This requires changes in the Sequencer's makeRequest() and issueRequest() functions, as they also need to operate on a Packet instead of RubyRequest.
2011-08-29Ruby: Remove some unused codeNilay Vaish
2011-04-15includes: sort all includesNathan Binkert
2011-03-21This patch adds the network tester for simple and garnet networks.Tushar Krishna
The tester code is in testers/networktest. The tester can be invoked by configs/example/ruby_network_test.py. A dummy coherence protocol called Network_test is also addded for network-only simulations and testing. The protocol takes in messages from the tester and just pushes them into the network in the appropriate vnet, without storing any state.
2011-03-19Ruby: Convert CacheRequestType to RubyRequestTypeNilay Vaish
This patch converts CacheRequestType to RubyRequestType so that both the protocol dependent and independent code makes use of the same request type.
2011-03-19Ruby: Convert AccessModeType to RubyAccessModeNilay Vaish
This patch converts AccessModeType to RubyAccessMode so that both the protocol dependent and independent code uses the same access mode.
2011-02-06ruby: Fix RubyPort to properly handle retrysBrad Beckmann
2010-08-20MOESI_hammer: break down miss latency stalled cyclesBrad Beckmann
This patch tracks the number of cycles a transaction is delayed at different points of the request-forward-response loop.
2010-08-20ruby: Added SC fail indication to trace profilingBrad Beckmann
2010-08-20ruby: fix ruby llsc support to sync sc outcomesBrad Beckmann
Added support so that ruby can determine the outcome of store conditional operations and reflect that outcome to M5 physical memory and cpus.
2010-08-20ruby: Reincarnated the responding machine profilingBrad Beckmann
This patch adds back to ruby the capability to understand the response time for messages that hit in different levels of the cache heirarchy. Specifically add support for the MI_example, MOESI_hammer, and MOESI_CMP_token protocols.
2010-06-10ruby: get rid of the Map classNathan Binkert
2010-04-02ruby: get "using namespace" out of headersNathan Binkert
In addition to obvious changes, this required a slight change to the slicc grammar to allow types with :: in them. Otherwise slicc barfs on std::string which we need for the headers that slicc generates.
2010-03-22ruby: style passNathan Binkert
2010-01-29ruby: Removed static members in RubyPort including hitcallbackBrad Beckmann
Removed static members in RubyPort and removed the ruby request unique id.
2010-01-29ruby: added the GEMS ruby testerBrad Beckmann
2010-01-29ruby: Converted the sequencer deadlock event to m5 eventqBrad Beckmann
2010-01-29ruby: Ruby changes required to use the python config systemBrad Beckmann
This patch includes the necessary changes to connect ruby objects using the python configuration system. Mainly it consists of removing unnecessary ruby object pointers and connecting the necessary object pointers using the generated param objects. This patch includes the slicc changes necessary to connect generated ruby objects together using the python configuraiton system.
2010-01-29ruby: Convert most Ruby objects to M5 SimObjects.Steve Reinhardt
The necessary companion conversion of Ruby objects generated by SLICC are converted to M5 SimObjects in the following patch, so this patch alone does not compile. Conversion of Garnet network models is also handled in a separate patch; that code is temporarily disabled from compiling to allow testing of interim code.
2010-01-19ruby: new atomics implementationDerek Hower
This patch changes the way that Ruby handles atomic RMW instructions. This implementation, unlike the prior one, is protocol independent. It works by locking an address from the sequencer immediately after the read portion of an RMW completes. When that address is locked, the coherence controller will only satisfy requests coming from one port (e.g., the mandatory queue) and will ignore all others. After the write portion completed, the line is unlocked. This should also work with multi-line atomics, as long as the blocks are always acquired in the same order.
2010-01-19mergeDerek Hower
2009-11-18ruby: Ruby 64-bit address output fixes.Brad Beckmann
2009-11-18ruby: added sequencer stats to track what requests are waiting onDerek Hower
2009-09-17Functionality migrated to sequencer.Polina Dudnik
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-14 01:38:32 +0000