gem5 - gem5

Age	Commit message (Collapse)	Author
2013-12-26	ruby: fix bugs in mesi cmp directory protocol	Nilay Vaish
	This patch fixes couple of bugs in the L2 controller of the mesi cmp directory protocol. 1. The state MT_I was transitioning to NP on receiving a clean writeback from the L1 controller. This patch makes it inform the directory controller about the writeback. 2. The L2 controller was sending the dirty bit to the L1 controller and the L2 controller used writeback from the L1 controller to update the dirty bit unconditionally. Now, the L1 controller always assumes that the incoming data is clean. The L2 controller updates the dirty bit only when the L1 controller writes to the block. 3. Certain unused functions and events are being removed.
2013-12-20	ruby: slicc: replace max_in_port_rank with number of inports	Nilay Vaish
	This patch replaces max_in_port_rank with the number of inports. The use of max_in_port_rank was causing spurious re-builds and incorrect initialization of variables in ruby related regression tests. This was due to the variable value being used across threads while compiling when it was not meant to be. Since the number of inports is state machine specific value, this problem should get solved.
2013-12-20	ruby: declare variables to be unsigned in Address.hh	Nilay Vaish

2013-12-20	ruby: mesi: remove owner and sharer fields from directory tags	Nilay Vaish
	The directory controller should not have the sharer field since there is only one level 2 cache. Anyway the field was not in use. The owner field was being used to track the l2 cache version (in case of distributed l2) that has the cache block under consideration. The information is not required since the version of the level 2 cache can be obtained from a subset of the address bits.
2013-11-01	mem: Fixes for DRAM stats accounting	Andreas Hansson
	This patch fixes a number of stats accounting issues in the DRAM controller. Most importantly, it separates the system interface and DRAM interface so that it is clearer what the actual DRAM bandwidth (and consequently utilisation) is.
2013-11-01	mem: Fix the LPDDR3 page size	Andreas Hansson
	This patch corrects the LPDDR3 page size, which was set too low.
2013-11-01	mem: Adding stats for DRAM power calculation	Neha Agarwal
	This patch adds stats which are used for offline power calculation from the 'Micron Power Calculator' spreadsheet.
2013-11-01	mem: Unify request selection for read and write queues	Neha Agarwal
	This patch unifies the request selection across read and write queues for FR-FCFS scheduling policy. It also fixes the request selection code to prioritize the row hits present in the request queues over the selection based on earliest bank availability.
2013-11-01	mem: Add a simple adaptive version of the open-page policy	Andreas Hansson
	This patch adds a basic adaptive version of the open-page policy that guides the decision to keep open or close by looking at the contents of the controller queues. If no row hits are found, and bank conflicts are present, then the row is closed by means of an auto precharge. This is a well-known technique that should improve performance in most use-cases.
2013-11-01	mem: Just-in-time write scheduling in DRAM controller	Neha Agarwal
	This patch removes the untimed while loop in the write scheduling mechanism and now schedule commands taking into account the minimum timing constraint. It also introduces an optimization to track write queue size and switch from writes to reads if the number of write requests fall below write low threshold.
2013-11-01	mem: Add tRRD as a timing parameter for the DRAM controller	Andreas Hansson
	This patch adds the tRRD parameter to the DRAM controller. With the recent addition of the actAllowedAt member for each bank, this addition is trivial.
2013-11-01	mem: Less conservative tRAS in DRAM configurations	Andreas Hansson
	This patch changes the default values of the tRAS timing parameter to be less conservative, and closer in line with existing parts.
2013-11-01	mem: Make tXAW enforcement less conservative and per rank	Ani Udipi
	This patch changes the tXAW constraint so that it is enforced per rank rather than globally for all ranks in the channel. It also avoids using the bank freeAt to enforce the activation limit, as doing so also precludes performing any column or row command to the DRAM. Instead the patch introduces a new variable actAllowedAt for the banks and use this to track when a potential activation can occur.
2013-11-01	mem: Fix for 100% write threshold in DRAM controller	Neha Agarwal
	This patch fixes the controller when a write threshold of 100% is used. Earlier for 100% write threshold no data is written to memory as writes never get triggered since this corner case is not considered.
2013-11-01	mem: Pick the next DRAM request based on bank availability	Andreas Hansson
	This patch changes the FCFS bit of FR-FCFS such that requests that target the earliest available bank are picked first (as suggested in the original work on FR-FCFS by Rixner et al). To accommodate this we add functionality to identify a bank through a one-dimensional identifier (bank id). The member names of the DRAMPacket are also update to match the style guide.
2013-11-01	mem: Use the same timing calculation for DRAM read and write	Ani Udipi
	This patch simplifies the DRAM model by re-using the function that computes the busy and access time for both reads and writes.
2013-11-01	mem: Fix DRAM bank occupancy for streaming access	Ani Udipi
	This patch fixes an issue that allowed more than 100% bus utilisation in certain cases.
2013-11-01	mem: Schedule time for DRAM event taking tRAS into account	Ani Udipi
	This patch changes the time the controller is woken up to take the next scheduling decisions. tRAS is now handled in estimateLatency and doDRAMAccess and we do not need to worry about it at scheduling time. The earliest we need to wake up is to do a pre-charge, row access and column access before the bus becomes free for use.
2013-11-01	mem: Add tRAS parameter to the DRAM controller model	Ani Udipi
	This patch adds an explicit tRAS parameter to the DRAM controller model. Previously tRAS was, rather conservatively, assumed to be tRCD + tCL + tRP. The default values for tRAS are chosen to match the previous behaviour and will be updated later.
2013-10-31	mem: Add "const" attribute to Packet getters	Stephan Diestelhorst
	Add a "const" keywords to the getters in the Packet class so these can be invoked on const Packet objects.
2013-10-31	mem: Add privilege info to request class	Prakash Ramrakhyani
	This patch adds a flag in the request class that indicates if the request was made in privileged mode.
2013-10-30	ruby: set SenderMachine in messages of MOESI_CMP_directory	Lluc Alvarez
	This patch adds missing initializations of the SenderMachine field of out_msg's when thery are created in the L2 cache controller of the MOESI_CMP_directory coherence protocol. When an out_msg is created and this field is left uninitialized, it is set to the default value MachineType_NUM. This causes a panic in the MachineType_to_string function when gem5 is executed with the Ruby debug flag on and it tries to print the message. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-10-30	ruby: Fixed a deadlock when restoring a checkpoint with garnet	Emilio Castillo
	This patch fixes a problem where in Garnet, the enqueue time in the VCallocator and the SWallocator which is of type Cycles was being stored inside a variable with int type. This lead to a known problem restoring checkpoints with garnet & the fixed pipeline enabled. That value was really big and didn't fit in the variable overflowing it, therefore some conditions on the VC allocation stage & the SW allocation stage were not met and the packets didn't advance through the network, leading to a deadlock panic right after the checkpoint was restored. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-10-17	mem: De-virtualise interfaces in the CoherentBus	Stephan Diestelhorst
	The CoherentBus eventually got virtual methods for its interface. The "virtuality" of the CoherentBus, however, comes already from the virtual interface of the bus' ports. There is no need to add another layer of virtual functions, here.
2013-10-17	cpu: add consistent guarding to *_impl.hh files.	Matt Horsnell

2013-10-17	mem: Add PortID to QueuedMasterPort constructor	Sascha Bischoff
	This patch adds the PortID to the QueuedMasterPort. This allows a PortID to be specified as it previously was set to the detault value of -1.
2013-10-17	mem: Make MemoryAccess flag more verbose	Ali Saidi
	This patch extends the MemoryAccess debug flag to report who sent the requests and the cacheability.
2013-10-15	ruby: eliminate non-determinism from ruby.stats output	Steve Reinhardt
	Get rid of non-deterministic "stats" in ruby.stats output such as time & date of run, elapsed & CPU time used, and memory usage. These values cause spurious miscomparisons when looking at output diffs (though they don't affect regressions, since the regressions pass/fail status currently ignores ruby.stats entirely). Most of this information is already captured in other places (time & date in stdout, elapsed time & mem usage in stats.txt), where the regression script is smart enough to filter it out. It seems easier to get rid of the redundant output rather than teaching the regression tester to ignore the same information in two different places.
2013-10-15	mem: Rename the ASI_BITS flag field in Request	Andreas Sandberg
	ASI_BITS in the Request object were originally used to store a memory request's ASI on SPARC. This is not the case any more since other ISAs use the ASI bits to store architecture-dependent information. This changeset renames the ASI_BITS to ARCH_BITS which better describes their use. Additionally, the getAsi() accessor is renamed to getArchFlags().
2013-10-15	mem: Use a flag instead of address bit 63 for generic IPRs	Andreas Sandberg
	Using address bit 63 to identify generic IPRs caused problems on SPARC, where IPRs are heavily used. This changeset redefines how generic IPRs are identified. Instead of using bit 63, we now use a separate flag (GENERIC_IPR) a memory request.
2013-09-18	mem: Fix scheduling bug in SimpleMemory	Andreas Hansson
	This patch ensures that a dequeue event is not scheduled if the memory controller is waiting for a retry already. Without this check it is possible for the controller to attempt sending something whilst already having one packet that is in retry, thus causing the bus to have an assertion failure.
2013-09-11	ruby: Fix Topology throttle connections	Joel Hestness
	The Topology source sets up input and output buffers for each of the external nodes of a topology by indexing on Ruby's generated controller unique IDs. These unique IDs are found by adding the MachineType_base_number to the version number of each controller (see any generated *_Controller.cc - init() calls getToNetQueue and getFromNetQueue using m_version + base). However, the Topology object used the cntrl_id - which is required to be unique across all controllers - to index the controllers list as they are being connected to their input and output buffers. If the cntrl_ids did not match the Ruby unique ID, the throttles end up connected to incorrectly indexed nodes in the network, resulting in packets traversing incorrect network paths. This patch fixes the Topology indexing scheme by using the Ruby unique ID to match that of the SimpleNetwork buffer vectors.
2013-09-11	ruby: Statically allocate stats in SimpleNetwork, Switch, Throttle	Joel Hestness
	The previous changeset (9863:9483739f83ee) used STL vector containers to dynamically allocate stats in the Ruby SimpleNetwork, Switch and Throttle. For gcc versions before at least 4.6.3, this causes the standard vector allocator to call Stats copy constructors (a no-no, since stats should be allocated in the body of each SimObject instance). Since the size of these stats arrays is known at compile time (NOTE: after code generation), this patch changes their allocation to be static rather than using an STL vector.
2013-09-06	ruby: network: convert to gem5 style stats	Nilay Vaish

2013-09-06	ruby: profiler: removes function resourceUsage()	Nilay Vaish

2013-09-06	ruby: remove undefined message size type	Nilay Vaish
	This message size type does not work well with one of the statistical variables. It also seems unnecessary.
2013-09-06	ruby: network: removes reset functionality	Nilay Vaish

2013-09-06	ruby: network: shorten variable names	Nilay Vaish

2013-09-06	ruby: converts sparse memory stats to gem5 style	Nilay Vaish

2013-09-04	arch: Resurrect the NOISA build target and rename it NULL	Andreas Hansson
	This patch makes it possible to once again build gem5 without any ISA. The main purpose is to enable work around the interconnect and memory system without having to build any CPU models or device models. The regress script is updated to include the NULL ISA target. Currently no regressions make use of it, but all the testers could (and perhaps should) transition to it. --HG-- rename : build_opts/NOISA => build_opts/NULL rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
2013-08-19	stats: Cumulative stats update	Andreas Hansson
	This patch updates the stats to reflect the: 1) addition of the internal queue in SimpleMemory, 2) moving of the memory class outside FSConfig, 3) fixing up of the 2D vector printing format, 4) specifying burst size and interface width for the DRAM instead of relying on cache-line size, 5) performing merging in the DRAM controller write buffer, and 6) fixing how idle cycles are counted in the atomic and timing CPU models. The main reason for bundling them up is to minimise the changeset size.
2013-08-19	config: Command line support for multi-channel memory	Andreas Hansson
	This patch adds support for specifying multi-channel memory configurations on the command line, e.g. 'se/fs.py --mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it enhances the functionality of MemConfig and moves the existing makeMultiChannel class method from SimpleDRAM to the support scripts. The se/fs.py example scripts are updated to make use of the new feature.
2013-08-19	mem: Change AbstractMemory defaults to match the common case	Andreas Hansson
	This patch changes the default parameter value of conf_table_reported to match the common case. It also simplifies the regression and config scripts to reflect this change.
2013-08-19	mem: Use STL deque in favour of list for DRAM queues	Andreas Hansson
	This patch changes the data structure used for the DRAM read, write and response queues from an STL list to deque. This optimisation is based on the observation that the size is small (and fixed), and that the structures are frequently iterated over in a linear fashion.
2013-08-19	mem: Perform write merging in the DRAM write queue	Andreas Hansson
	This patch implements basic write merging in the DRAM to avoid redundant bursts. When a new access is added to the queue it is compared against the existing entries, and if it is either intersecting or immediately succeeding/preceeding an existing item it is merged. There is currently no attempt made at avoiding iterating over the existing items in determining whether merging is possible or not.
2013-08-19	mem: Replacing bytesPerCacheLine with DRAM burstLength in SimpleDRAM	Amin Farmahini
	This patch gets rid of bytesPerCacheLine parameter and makes the DRAM configuration separate from cache line size. Instead of bytesPerCacheLine, we define a parameter for the DRAM called burst_length. The burst_length parameter shows the length of a DRAM device burst in bits. Also, lines_per_rowbuffer is replaced with device_rowbuffer_size to improve code portablity. This patch adds a burst length in beats for each memory type, an interface width for each memory type, and the memory controller model is extended to reason about "system" packets vs "dram" packets and assemble the responses properly. It means that system packets larger than a full burst are split into multiple dram packets.
2013-08-19	mem: Warn instead of panic for tXAW violation	Andreas Hansson
	Until the performance bug is fixed, avoid killing simulations.
2013-08-19	mem: Allow disabling of tXAW through a 0 activation limit	Andreas Hansson
	This patch fixes an issue where an activation limit of 0 was not allowed. With this patch, setting the limit to 0 simply disables the tXAW constraint.
2013-08-19	mem: Add an internal packet queue in SimpleMemory	Andreas Hansson
	This patch adds a packet queue in SimpleMemory to avoid using the packet queue in the port (and thus have no involvement in the flow control). The port queue was bound to 100 packets, and as the SimpleMemory is modelling both a controller and an actual RAM, it potentially has a large number of packets in flight. There is currently no limit on the number of packets in the memory controller, but this could easily be added in a follow-on patch. As a result of the added internal storage, the functional access and draining is updated. Some minor cleaning up and renaming has also been done. The memtest regression changes as a result of this patch and the stats will be updated.
2013-08-07	ruby: slicc: remove double trigger, continueProcessing	Nilay Vaish
	These constructs are not in use and are not being maintained by any one. In addition, it is not known if doubleTrigger works correctly with Ruby now.