summaryrefslogtreecommitdiff
path: root/src/mem
AgeCommit message (Collapse)Author
2014-01-28mem: Fixes a bug in simple_dram write mergingAmin Farmahini
Fixes updating the value of size in the write merge function. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-01-24cpu: Add support for instructions that zero cache lines.Ali Saidi
2014-01-24mem: Add flag to request if it was generated by a page table walkGiacomo Gabrielli
2014-01-24mem: Add support for a security bit in the memory systemGiacomo Gabrielli
This patch adds the basic building blocks required to support e.g. ARM TrustZone by discerning secure and non-secure memory accesses.
2014-01-24Cache: Collect very basic stats on tag and data accessesTimothy M. Jones
Adds very basic statistics on the number of tag and data accesses within the cache, which is important for power modelling. For the tags, simply count the associativity of the cache each time. For the data, this depends on whether tags and data are accessed sequentially, which is given by a new parameter. In the parallel case, all data blocks are accessed each time, but with sequential accesses, a single data block is accessed only on a hit.
2014-01-24mem: per-thread cache occupancy and per-block agesDam Sunwoo
This patch enables tracking of cache occupancy per thread along with ages (in buckets) per cache blocks. Cache occupancy stats are recalculated on each stat dump.
2014-01-24mem: track per-request latencies and access depths in the cache hierarchyMatt Horsnell
Add some values and methods to the request object to track the translation and access latency for a request and which level of the cache hierarchy responded to the request.
2014-01-17ruby: remove unused label no_vectorNilay Vaish
2014-01-10ruby: move all statistics to stats.txt, eliminate ruby.statsNilay Vaish
2014-01-09ruby: fix bug introduced to revision 8523754f8885Nilay Vaish
2014-01-08ruby: slicc: remove variable 'addr' used in calls to doTransitionNilay Vaish
This variable causes trouble if a variable of same name is declared in a protocol file. Hence it is being eliminated.
2014-01-04ruby: add a three level MESI protocol.Nilay Vaish
The first two levels (L0, L1) are private to the core, the third level (L2)is possibly shared. The protocol supports clustered designs. For example, one can have two sets of two cores. Each core has an L0 and L1 cache. There are two L2 controllers where each set accesses only one of the L2 controllers.
2014-01-04ruby: rename MESI_CMP_directory to MESI_Two_LevelNilay Vaish
This is because the next patch introduces a three level hierarchy. --HG-- rename : build_opts/ALPHA_MESI_CMP_directory => build_opts/ALPHA_MESI_Two_Level rename : build_opts/X86_MESI_CMP_directory => build_opts/X86_MESI_Two_Level rename : configs/ruby/MESI_CMP_directory.py => configs/ruby/MESI_Two_Level.py rename : src/mem/protocol/MESI_CMP_directory-L1cache.sm => src/mem/protocol/MESI_Two_Level-L1cache.sm rename : src/mem/protocol/MESI_CMP_directory-L2cache.sm => src/mem/protocol/MESI_Two_Level-L2cache.sm rename : src/mem/protocol/MESI_CMP_directory-dir.sm => src/mem/protocol/MESI_Two_Level-dir.sm rename : src/mem/protocol/MESI_CMP_directory-dma.sm => src/mem/protocol/MESI_Two_Level-dma.sm rename : src/mem/protocol/MESI_CMP_directory-msg.sm => src/mem/protocol/MESI_Two_Level-msg.sm rename : src/mem/protocol/MESI_CMP_directory.slicc => src/mem/protocol/MESI_Two_Level.slicc rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/config.ini => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simerr => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simerr rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/simout => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/simout rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_CMP_directory/system.pc.com_1.terminal => tests/long/fs/10.linux-boot/ref/x86/linux/pc-simple-timing-ruby-MESI_Two_Level/system.pc.com_1.terminal rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simerr rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/simout rename : tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/linux/simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/config.ini => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simerr => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simerr rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/simout => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/simout rename : tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/00.hello/ref/alpha/tru64/simple-timing-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simerr => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simerr rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/simout => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/simout rename : tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/50.memtest/ref/alpha/linux/memtest-ruby-MESI_Two_Level/stats.txt rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/ruby.stats => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/ruby.stats rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt
2014-01-04ruby: add support for clustersNilay Vaish
A cluster over here means a set of controllers that can be accessed only by a certain set of cores. For example, consider a two level hierarchy. Assume there are 4 L1 controllers (private) and 2 L2 controllers. We can have two different hierarchies here: a. the address space is partitioned between the two L2 controllers. Each L1 controller accesses both the L2 controllers. In this case, each L1 controller is a cluster initself. b. both the L2 controllers can cache any address. An L1 controller has access to only one of the L2 controllers. In this case, each L2 controller along with the L1 controllers that access it, form a cluster. This patch allows for each controller to have a cluster ID, which is 0 by default. By setting the cluster ID properly, one can instantiate hierarchies with clusters. Note that the coherence protocol might have to be changed as well.
2014-01-04ruby: some small changesNilay Vaish
2013-12-26ruby: fix bugs in mesi cmp directory protocolNilay Vaish
This patch fixes couple of bugs in the L2 controller of the mesi cmp directory protocol. 1. The state MT_I was transitioning to NP on receiving a clean writeback from the L1 controller. This patch makes it inform the directory controller about the writeback. 2. The L2 controller was sending the dirty bit to the L1 controller and the L2 controller used writeback from the L1 controller to update the dirty bit unconditionally. Now, the L1 controller always assumes that the incoming data is clean. The L2 controller updates the dirty bit only when the L1 controller writes to the block. 3. Certain unused functions and events are being removed.
2013-12-20ruby: slicc: replace max_in_port_rank with number of inportsNilay Vaish
This patch replaces max_in_port_rank with the number of inports. The use of max_in_port_rank was causing spurious re-builds and incorrect initialization of variables in ruby related regression tests. This was due to the variable value being used across threads while compiling when it was not meant to be. Since the number of inports is state machine specific value, this problem should get solved.
2013-12-20ruby: declare variables to be unsigned in Address.hhNilay Vaish
2013-12-20ruby: mesi: remove owner and sharer fields from directory tagsNilay Vaish
The directory controller should not have the sharer field since there is only one level 2 cache. Anyway the field was not in use. The owner field was being used to track the l2 cache version (in case of distributed l2) that has the cache block under consideration. The information is not required since the version of the level 2 cache can be obtained from a subset of the address bits.
2013-11-01mem: Fixes for DRAM stats accountingAndreas Hansson
This patch fixes a number of stats accounting issues in the DRAM controller. Most importantly, it separates the system interface and DRAM interface so that it is clearer what the actual DRAM bandwidth (and consequently utilisation) is.
2013-11-01mem: Fix the LPDDR3 page sizeAndreas Hansson
This patch corrects the LPDDR3 page size, which was set too low.
2013-11-01mem: Adding stats for DRAM power calculationNeha Agarwal
This patch adds stats which are used for offline power calculation from the 'Micron Power Calculator' spreadsheet.
2013-11-01mem: Unify request selection for read and write queuesNeha Agarwal
This patch unifies the request selection across read and write queues for FR-FCFS scheduling policy. It also fixes the request selection code to prioritize the row hits present in the request queues over the selection based on earliest bank availability.
2013-11-01mem: Add a simple adaptive version of the open-page policyAndreas Hansson
This patch adds a basic adaptive version of the open-page policy that guides the decision to keep open or close by looking at the contents of the controller queues. If no row hits are found, and bank conflicts are present, then the row is closed by means of an auto precharge. This is a well-known technique that should improve performance in most use-cases.
2013-11-01mem: Just-in-time write scheduling in DRAM controllerNeha Agarwal
This patch removes the untimed while loop in the write scheduling mechanism and now schedule commands taking into account the minimum timing constraint. It also introduces an optimization to track write queue size and switch from writes to reads if the number of write requests fall below write low threshold.
2013-11-01mem: Add tRRD as a timing parameter for the DRAM controllerAndreas Hansson
This patch adds the tRRD parameter to the DRAM controller. With the recent addition of the actAllowedAt member for each bank, this addition is trivial.
2013-11-01mem: Less conservative tRAS in DRAM configurationsAndreas Hansson
This patch changes the default values of the tRAS timing parameter to be less conservative, and closer in line with existing parts.
2013-11-01mem: Make tXAW enforcement less conservative and per rankAni Udipi
This patch changes the tXAW constraint so that it is enforced per rank rather than globally for all ranks in the channel. It also avoids using the bank freeAt to enforce the activation limit, as doing so also precludes performing any column or row command to the DRAM. Instead the patch introduces a new variable actAllowedAt for the banks and use this to track when a potential activation can occur.
2013-11-01mem: Fix for 100% write threshold in DRAM controllerNeha Agarwal
This patch fixes the controller when a write threshold of 100% is used. Earlier for 100% write threshold no data is written to memory as writes never get triggered since this corner case is not considered.
2013-11-01mem: Pick the next DRAM request based on bank availabilityAndreas Hansson
This patch changes the FCFS bit of FR-FCFS such that requests that target the earliest available bank are picked first (as suggested in the original work on FR-FCFS by Rixner et al). To accommodate this we add functionality to identify a bank through a one-dimensional identifier (bank id). The member names of the DRAMPacket are also update to match the style guide.
2013-11-01mem: Use the same timing calculation for DRAM read and writeAni Udipi
This patch simplifies the DRAM model by re-using the function that computes the busy and access time for both reads and writes.
2013-11-01mem: Fix DRAM bank occupancy for streaming accessAni Udipi
This patch fixes an issue that allowed more than 100% bus utilisation in certain cases.
2013-11-01mem: Schedule time for DRAM event taking tRAS into accountAni Udipi
This patch changes the time the controller is woken up to take the next scheduling decisions. tRAS is now handled in estimateLatency and doDRAMAccess and we do not need to worry about it at scheduling time. The earliest we need to wake up is to do a pre-charge, row access and column access before the bus becomes free for use.
2013-11-01mem: Add tRAS parameter to the DRAM controller modelAni Udipi
This patch adds an explicit tRAS parameter to the DRAM controller model. Previously tRAS was, rather conservatively, assumed to be tRCD + tCL + tRP. The default values for tRAS are chosen to match the previous behaviour and will be updated later.
2013-10-31mem: Add "const" attribute to Packet gettersStephan Diestelhorst
Add a "const" keywords to the getters in the Packet class so these can be invoked on const Packet objects.
2013-10-31mem: Add privilege info to request classPrakash Ramrakhyani
This patch adds a flag in the request class that indicates if the request was made in privileged mode.
2013-10-30ruby: set SenderMachine in messages of MOESI_CMP_directoryLluc Alvarez
This patch adds missing initializations of the SenderMachine field of out_msg's when thery are created in the L2 cache controller of the MOESI_CMP_directory coherence protocol. When an out_msg is created and this field is left uninitialized, it is set to the default value MachineType_NUM. This causes a panic in the MachineType_to_string function when gem5 is executed with the Ruby debug flag on and it tries to print the message. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-10-30ruby: Fixed a deadlock when restoring a checkpoint with garnetEmilio Castillo
This patch fixes a problem where in Garnet, the enqueue time in the VCallocator and the SWallocator which is of type Cycles was being stored inside a variable with int type. This lead to a known problem restoring checkpoints with garnet & the fixed pipeline enabled. That value was really big and didn't fit in the variable overflowing it, therefore some conditions on the VC allocation stage & the SW allocation stage were not met and the packets didn't advance through the network, leading to a deadlock panic right after the checkpoint was restored. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-10-17mem: De-virtualise interfaces in the CoherentBusStephan Diestelhorst
The CoherentBus eventually got virtual methods for its interface. The "virtuality" of the CoherentBus, however, comes already from the virtual interface of the bus' ports. There is no need to add another layer of virtual functions, here.
2013-10-17cpu: add consistent guarding to *_impl.hh files.Matt Horsnell
2013-10-17mem: Add PortID to QueuedMasterPort constructorSascha Bischoff
This patch adds the PortID to the QueuedMasterPort. This allows a PortID to be specified as it previously was set to the detault value of -1.
2013-10-17mem: Make MemoryAccess flag more verboseAli Saidi
This patch extends the MemoryAccess debug flag to report who sent the requests and the cacheability.
2013-10-15ruby: eliminate non-determinism from ruby.stats outputSteve Reinhardt
Get rid of non-deterministic "stats" in ruby.stats output such as time & date of run, elapsed & CPU time used, and memory usage. These values cause spurious miscomparisons when looking at output diffs (though they don't affect regressions, since the regressions pass/fail status currently ignores ruby.stats entirely). Most of this information is already captured in other places (time & date in stdout, elapsed time & mem usage in stats.txt), where the regression script is smart enough to filter it out. It seems easier to get rid of the redundant output rather than teaching the regression tester to ignore the same information in two different places.
2013-10-15mem: Rename the ASI_BITS flag field in RequestAndreas Sandberg
ASI_BITS in the Request object were originally used to store a memory request's ASI on SPARC. This is not the case any more since other ISAs use the ASI bits to store architecture-dependent information. This changeset renames the ASI_BITS to ARCH_BITS which better describes their use. Additionally, the getAsi() accessor is renamed to getArchFlags().
2013-10-15mem: Use a flag instead of address bit 63 for generic IPRsAndreas Sandberg
Using address bit 63 to identify generic IPRs caused problems on SPARC, where IPRs are heavily used. This changeset redefines how generic IPRs are identified. Instead of using bit 63, we now use a separate flag (GENERIC_IPR) a memory request.
2013-09-18mem: Fix scheduling bug in SimpleMemoryAndreas Hansson
This patch ensures that a dequeue event is not scheduled if the memory controller is waiting for a retry already. Without this check it is possible for the controller to attempt sending something whilst already having one packet that is in retry, thus causing the bus to have an assertion failure.
2013-09-11ruby: Fix Topology throttle connectionsJoel Hestness
The Topology source sets up input and output buffers for each of the external nodes of a topology by indexing on Ruby's generated controller unique IDs. These unique IDs are found by adding the MachineType_base_number to the version number of each controller (see any generated *_Controller.cc - init() calls getToNetQueue and getFromNetQueue using m_version + base). However, the Topology object used the cntrl_id - which is required to be unique across all controllers - to index the controllers list as they are being connected to their input and output buffers. If the cntrl_ids did not match the Ruby unique ID, the throttles end up connected to incorrectly indexed nodes in the network, resulting in packets traversing incorrect network paths. This patch fixes the Topology indexing scheme by using the Ruby unique ID to match that of the SimpleNetwork buffer vectors.
2013-09-11ruby: Statically allocate stats in SimpleNetwork, Switch, ThrottleJoel Hestness
The previous changeset (9863:9483739f83ee) used STL vector containers to dynamically allocate stats in the Ruby SimpleNetwork, Switch and Throttle. For gcc versions before at least 4.6.3, this causes the standard vector allocator to call Stats copy constructors (a no-no, since stats should be allocated in the body of each SimObject instance). Since the size of these stats arrays is known at compile time (NOTE: after code generation), this patch changes their allocation to be static rather than using an STL vector.
2013-09-06ruby: network: convert to gem5 style statsNilay Vaish
2013-09-06ruby: profiler: removes function resourceUsage()Nilay Vaish
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 08:50:47 +0000