| Age | Commit message (Collapse) | Author |
|---|
|
Due to recent changes to clocking system in Ruby and the way Ruby restores
state from a checkpoint, garnet was failing to run from a checkpointed state.
The problem is that Ruby resets the time to zero while warming up the caches.
If any component records a local copy of the time (read calls curCycle())
before the simulation has started, then that component will not operate until
that time is reached. In the context of this particular patch, the Garnet
Network class calls curCycle() at multiple places. Any non-operational
component can block in requests in the memory system, which the system
interprets as a deadlock. This patch makes changes so that Garnet can
successfully run from checkpointed state.
It adds a globally visible time at which the actual execution started. This
time is initialized in RubySystem::startup() function. This variable is only
meant for components with in Ruby. This replaces the private variable that
was maintained within Garnet since it is not possible to figure out the
correct time when the value of this variable can be set.
The patch also does away with all cases where curCycle() is called with in
some Ruby component before the system has actually started executing. This
is required due to the quirky manner in which ruby restores from a checkpoint.
|
|
This patch adds an address mapping scheme where the channel
interleaving takes place on a cache line granularity. It is similar to
the existing RaBaChCo that interleaves on a DRAM page, but should give
higher performance when there is less locality in the address
stream.
|
|
This patch changes the slightly ambigious names used for the address
mapping scheme to be more descriptive, and actually spell out what
they do. With this patch we also open up for adding more flavours of
open- and close-type mappings, i.e. interleaving across channels with
the open map.
|
|
This patch adds a WideIO 200 MHz configuration that can be used as a
baseline to compare with DDRx and LPDDRx. Note that it is a single
channel and that it should be replicated 4 times. It is based on
publically available information and attempts to capture an envisioned
8 Gbit single-die part (i.e. without TSVs).
|
|
This patch provides useful printouts throughut the memory system. This
includes pretty-printed cache tags and function call messages
(call-stack like).
|
|
This patch changes the SimpleTimingPort and RubyPort to panic on
inhibited requests as this should never happen in either of the
cases. The SimpleTimingPort is only used for the I/O devices PIO port
and the DMA devices config port and should thus never see an inhibited
request. Similarly, the SimpleTimingPort is also used for the
MessagePort in x86, and there should also not be any cases where the
port sees an inhibited request.
|
|
Previously, nextCycle() could return the *current* cycle if the current tick was
already aligned with the clock edge. This behavior is not only confusing (not
quite what the function name implies), but also caused problems in the
drainResume() function. When exiting/re-entering the sim loop (e.g., to take
checkpoints), the CPUs will drain and resume. Due to the previous behavior of
nextCycle(), the CPU tick events were being rescheduled in the same ticks that
were already processed before draining. This caused divergence from runs that
did not exit/re-entered the sim loop. (Initially a cycle difference, but a
significant impact later on.)
This patch separates out the two behaviors (nextCycle() and clockEdge()),
uses nextCycle() in drainResume, and uses clockEdge() everywhere else.
Nothing (other than name) should change except for the drainResume timing.
|
|
|
|
When using the o3 or inorder CPUs with many Ruby protocols, the caches may
need to forward invalidations to the CPUs. The RubyPort was instantiating a
packet to be sent to the CPUs to signal the eviction, but the packets were
not being freed by the CPUs. Consistent with the classic memory model, stack
allocate the packet and heap allocate the request so on
ruby_eviction_callback() completion, the packet deconstructor is called, and
deletes the request (*Note: stack allocating the request causes double
deletion, since it will be deleted in the packet destructor). This results in
the least memory allocations without memory errors.
|
|
When warming up caches in Ruby, the CacheRecorder sends fetch requests into
Ruby Sequencers with packet types that require responses. Since responses are
never generated for these CacheRecorder requests, the requests are not deleted
in the packet destructor called from the Ruby hit callback. Free the request.
|
|
This allows you to have (i.e.) an L2 cache that is not named "L2Cache"
but is still a GenericMachineType_L2Cache. This is particularly
helpful if the protocol has multiple L2 controllers.
|
|
When Ruby stats are printed for events and transitions, they include stats
for all of the controllers of the same type, but they are not necessarily
printed in order of the controller ID "version", because of the way the
profilers were added to the profiler vector. This patch fixes the push order
problem so that the stats are printed in ascending order 0->(# controllers),
so statistics parsers may correctly assume the controller to which the stats
belong.
|
|
When connecting message buffers between Ruby controllers, it is
easy to mistakenly connect multiple controllers to the same message
buffer. This patch prints a more descriptive fatal message than the
previous assert statement in order to facilitate easier debugging.
|
|
The error in the SLICC code was hidden by the python error in SLICC parser
before this patch
|
|
The cache trace variables are array allocated uint8_t* in the RubySystem and
the Ruby CacheRecorder, but the code used delete to free the memory, resulting
in Valgrind memory errors. Change these deletes to delete [] to get rid of the
errors.
|
|
Fixes a latency calculation bug for accesses during a cache line fill.
Under a cache miss, before the line is filled, accesses to the cache are
associated with a MSHR and marked as targets. Once the line fill completes,
MSHR target packets pay an additional latency of
"responseLatency + busSerializationLatency". However, the "whenReady"
field of the cache line is only set to an additional delay of
"busSerializationLatency". This lacks the responseLatency component of
the fill. It is possible for accesses that occur on the cycle of
(or briefly after) the line fill to respond without properly paying the
responseLatency. This also creates the situation where two accesses to the
same address may be serviced in an order opposite of how they were received
by the cache. For stores to the same address, this means that although the
cache performs the stores in the order they were received, acknowledgements
may be sent in a different order.
Adding the responseLatency component to the whenReady field preserves the
penalty that should be paid and prevents these ordering issues.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This patch solves the corner case scenario where the sendRetryEvent could be
scheduled twice, when an io device stresses the IOcache in the system. This
should not be possible in the cache system.
|
|
This patch splits the retryList into a list of ports that are waiting
for the bus itself to become available, and a map that tracks the
ports where forwarding failed due to a peer not accepting the
packet. Thus, when a retry reaches the bus, it can be sent to the
appropriate port that initiated that transaction.
As a consequence of this patch, only ports that are really ready to go
will get a retry, thus reducing the amount of redundant failed
attempts. This patch also makes it easier to reason about the order of
servicing requests as the ports waiting for the bus are now clearly
FIFO and much easier to change if desired.
|
|
This patch introduces a variable to keep track of the retrying port
instead of relying on it being the front of the retryList.
Besides the improvement in readability, this patch is a step towards
separating out the two cases where a port is waiting for the bus to be
free, and where the forwarding did not succeed and the bus is waiting
for a retry to pass on to the original initiator of the transaction.
The changes made are currently such that the regressions are not
affected. This is ensured by always prioritizing the currently
retrying port and putting it back at the front of the retry list.
|
|
This patch adds an optional flags field to the packet trace to encode
the request flags that contain information about whether the request
is (un)cacheable, instruction fetch, preftech etc.
|
|
|
|
A recent set of patches added support for multiple clock domains to ruby.
I had made some errors while writing those patches. The sender was using
the receiver side clock while enqueuing a message in the buffer. Those
errors became visible while creating (or restoring from) checkpoints. The
errors also become visible when a multi eventq scenario occurs.
|
|
The names were getting too long.
|
|
The message buffer node used to keep time in terms of Cycles. Since the
sender and the receiver can have different clock periods, storing node
time in cycles requires some conversion. Instead store the time directly
in Ticks.
|
|
A set of patches was recently committed to allow multiple clock domains
in ruby. In those patches, I had inadvertently made an incorrect use of
the clocks. Suppose object A needs to schedule an event on object B. It
was possible that A accesses B's clock to schedule the event. This is not
possible in actual system. Hence, changes are being to the Consumer class
so as to avoid such happenings. Note that in a multi eventq simulation,
this can possibly lead to an incorrect simulation.
There are two functions in the Consumer class that are used for scheduling
events. The first function takes in the relative delay over the current time
as the argument and adds the current time to it for scheduling the event.
The second function takes in the absolute time (in ticks) for scheduling the
event. The first function is now being moved to protected section of the
class so that only objects of the derived classes can use it. All other
objects will have to specify absolute time while scheduling an event
for some consumer.
|
|
|
|
The histogram for tracking outstanding counts per cycle is maintained
in the profiler. For a parallel implementation of the memory system, we
need that this histogram is maintained locally. Hence it will now be
kept in the sequencer itself. The resulting histograms will be merged
when the stats are printed.
|
|
|
|
These functions are currently implemented in one of the files related to Slicc.
Since these are purely C++ functions, they are better suited to be in the base
class.
|
|
This patch modifies ruby so that two controllers can be connected to each
other with only message buffers in between. Before this patch, all the
controllers had to be connected to the network for them to communicate
with each other. With this patch, one can have protocols where a controller
is not connected to the network, but communicates with another controller
through a message buffer.
|
|
The Topology class in Ruby does not need to inherit from SimObject class.
This patch turns it into a regular class. The topology object is now created
in the constructor of the Network class. All the parameters for the topology
class have been moved to the network class.
|
|
|
|
This patch fixes a memory leak caused by not deleting packets that
require no response.
|
|
|
|
This patch fixes the one-and-only gcc 4.8 compilation error, being a
warning about "maybe uninitialized" in Orion.
|
|
This patch removes the functional copy of the memory that was maintained in
the se mode. Now ruby itself will provide the data.
|
|
|
|
The functional write code was assuming that all writes are block sized,
which may not be true for Ruby Requests. This bug can lead to a buffer
overflow.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This check covers a case where a retry is called from the SimpleDRAM
causing a new request to appear before the DRAM itself schedules a
nextReqEvent. By adding this check, the event is not scheduled twice.
|
|
This patch adds a class method that allows easy creation of
channel-interleaved multi-channel DRAM configurations. It is enabled
by a class method to allow customisation of the class independent of
the channel configuration. For example, the user can create a MyDDR
subclass of e.g. SimpleDDR3, and then create a four-channel
configuration of the subclass by calling MyDDR.makeMultiChannel(4,
mem_start, mem_size).
|
|
This patch fixes a number of small cosmetic issues in the SimpleDRAM
module. The most important change is to move the accounting of
received packets to after the check is made if the packet should be
retried or not. Thus, packets are only counted if they are actually
accepted.
|
|
This patch adds support for multi-channel instances of the DRAM
controller model by stripping away the channel bits in the address
decoding. The patch relies on the availiability of address
interleaving and, at this time, it is up to the user to configure the
interleaving appropriately. At the moment it is assumed that the
channel interleaving bits are immediately following the column bits
(smallest sensible interleaving). Convenience methods for building
multi-channel configurations will be added later.
|
|
This patch adds merging of interleaved ranges before creating the
backing stores. The backing stores are always a contigous chunk of the
address space, and with this patch it is possible to have interleaved
memories in the system.
|
|
This patch adds basic merging of address ranges to the bus, such that
interleaved ranges are merged together before being passed on by the
bus. As such, the bus aggregates the address ranges of the connected
slave ports and then passes on the merged ranges through its master
ports. The bus thus hides the complexity of the interleaved ranges and
only exposes contigous ranges to the surrounding system.
As part of this patch, the bus ranges are also cached for any future
queries.
|
|
The MESI CMP directory coherence protocol, while transitioning from SM to IM,
did not invalidate the lock that it might have taken on a cache line. This
patch adds an action for doing so.
The problem was found by Dibakar, but I was not happy with his proposed
solution. So I implemented a different solution.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
|
|
|
|
This patch fixes a newly introduced bug where the sender state was
popped before checking that it should be. Amazingly all regressions
pass, but Linux fails to boot on the detailed CPU with caches enabled.
|
|
This patch fixes the warnings that clang3.2svn emit due to the "-Wall"
flag. There is one case of an uninitialised value in the ARM neon ISA
description, and then a whole range of unused private fields that are
pruned.
|
|
This patch enables warnings for missing declarations. To avoid issues
with SWIG-generated code, the warning is only applied to non-SWIG
code.
|
