| Age | Commit message (Collapse) | Author |
|---|
|
Self-refresh is entered during a refresh event, when the
rank was previously in a precharge power-down state.
The original code would enter self-refresh after a refresh
was issued. The device subsequently will issue a refresh
on self-refresh entry. On self-refresh exit, the controller
will issue another refresh command.
Devices require at least one additional refresh to be issued
between self-refresh exit and re-entry. This ensures that enough
refreshes occur in the case when the device narrowly missed a
refresh on self-refresh exit.
To minimize the number of refresh operations and still maintain
the device requirement, the current logic does the following:
1) The controller will still enter self-refresh from a refresh
event, when the previous state was precharge power-down.
However, the refresh itself will be bypassed and the controller
will immediately issue a self-refresh entry.
2) On a self-refresh exit, the controller will immediately
issue a refresh command (per the original logic). This ensures
the devices requirements are met and is a convenient way to
kick off the command state machine.
Change-Id: I1c4b0dcbfa3bdafd755f3ccd65e267fcd700c491
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10102
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The tags in the cache keep track of the number of references to the
blocks as well as the average number of references between an
insertion and the next invalidation. Previously the stats where
updated only on block insertion and invalidations were ignored. This
changes moves the update of the counters to the block invalidation
function.
Change-Id: Ie7672c13813ec278a65232694024d2e5e17c4612
Reviewed-on: https://gem5-review.googlesource.com/10428
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
At the moment isTouched is used in the warm-up detection mechanism but
it keeps track of the same information as isValid(). This change
removes it and substitutes its use by isValid().
Change-Id: I611ddf2fa4562ae3b3b2ed2fb74d26abd2e5ec62
Reviewed-on: https://gem5-review.googlesource.com/10427
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
Change-Id: I25dbcfcddfe1c422a76eb1af3f726c1360d8d110
Reviewed-on: https://gem5-review.googlesource.com/10426
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When we use the tempBlock to fill-in, we have to write it back and
invalidate it at the end of current transaction. This patch simplifies
the writeback flow by treating it as a regular writeback.
Change-Id: I257be7bbff211e2832ad001a4e991daf67704485
Reviewed-on: https://gem5-review.googlesource.com/10421
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I26136fb49f743c4a597f8021cfd27f78897267b5
Reviewed-on: https://gem5-review.googlesource.com/10463
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Create a block insertion function to be used when inserting
blocks. This resets the number of references to 1 (the
insertion is taken into account), sets the insertion tick,
and set secure state.
Change-Id: Ifc34cbbd1c125207ce47912d188809221c7a157e
Reviewed-on: https://gem5-review.googlesource.com/9824
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I053fc42f0d5f678f8e3434b53a0f09e00fc3e345
Reviewed-on: https://gem5-review.googlesource.com/10221
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Implementation of a Second-Chance replacement policy. Similar to FIFO,
but every block is given a second chance if it has been touched.
Change-Id: Id4d52b698d0045a4914a4d848fdf9c3c00a28508
Reviewed-on: https://gem5-review.googlesource.com/9441
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Replacement data is specific for each replacement policy, and thus
should be instantiated differently by each policy.
Touch() and reset() do not need to be aware of CacheBlk, as they
only update its ReplacementData.
Invalidate() makes replacement policies independent of cache blocks,
by removing the awareness of the valid state.
An inheritable base ReplaceableEntry class was created to allow usage
of replacement policies with any table-like structure.
Change-Id: I998917d800fa48504ed95abffa2f1b7bfd68522b
Reviewed-on: https://gem5-review.googlesource.com/9421
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Use block iteration instead of numSets and assoc in print(),
cleanupRefs() and computeStats().
This makes these functions rely solely on what they are used for:
printing and calculating stats of blocks. With the addition of
Sectors an extra indirection level is added, and thus these
functions would be skipping blocks.
Change-Id: I0006f82736cce02ba3e501ffafe9236f748daf32
Reviewed-on: https://gem5-review.googlesource.com/10143
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
An access must perform a block search, which is done by findBlock.
The tagHash is indexed by tags, so use extractTag instead of re-
implementing its functionality.
Change-Id: Ib5abacbc65cddf0f2d7e4440eb5355b56998a585
Reviewed-on: https://gem5-review.googlesource.com/10082
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
FALRU's findBlock() must use the secure flag to assure proper
functionality.
Change-Id: I54e9fbd3c9093b3e8043c4c6c850b74a8f1f5ec0
Reviewed-on: https://gem5-review.googlesource.com/10081
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a Not Recently Used replacement policy.
Change-Id: I24ab3a6f1db6dcb756b869cfebb5c4bc544170e8
Reviewed-on: https://gem5-review.googlesource.com/9001
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This change fixes a few bugs and refactors the mechanism by which
caches that use the FALRU tags can output statistics for multiple
cache sizes ranging from the minimum cache of interest up to the
actual configured cache size.
Change-Id: Ibea029cf275a8c068c26eceeb06c761fc53aede2
Reviewed-on: https://gem5-review.googlesource.com/9826
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: Ib92f8bb4ab7b61ebc96b935cb8abc42cf5ec6ac8
Reviewed-on: https://gem5-review.googlesource.com/9921
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
There are many devices that need to handle reads/writes of different
word sizes. A common pattern is a switch statement that check for the
size of a packet and then calls the corresponding
Packet::(get|set)<uintXX_t> methods. Simplify this by implementing
Packet::(get|set)UintX helper functions.
The getter reads a word of the size specified in the packet and the
specified endianness. The word is then zero-extended to 64
bits. Conversely, the setter truncates the word down to the size
required in the packet and then byte-swaps it to the desired
endianness.
Change-Id: I2f0c27fe3903abf3859bea13b07c7f5f0fb0809f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9761
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
12db50c895 changed how directory mapping works, but it seems to have
broken the VIPER variants of the GPU protocols. The fix involves
declaring the function in the related '.sm' files.
Change-Id: I116980d42a4aa648369058b529c9f8d9693eb894
Reviewed-on: https://gem5-review.googlesource.com/8521
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Since a3177645, the MESI_Three_Level protocol does not build. This
changeset addresses the problem by adding the L0Cache machine type
to the static machine type declaration in Ruby's export file.
Change-Id: I6327547fcb34595619caeb73932c0032f5f65c9f
Reviewed-on: https://gem5-review.googlesource.com/8383
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I6585c5664d966989991f61303548aed634cf298a
Reviewed-on: https://gem5-review.googlesource.com/9841
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
FALRU was missing MoveToTail functionality within its invalidate
function, and MoveToHead was doing unnecessary passes when the
moved block was the head already.
Besides, added some comments to make the code understandable.
Change-Id: I2430d82b5d53c88b102a62610ea38b46d6e03a55
Reviewed-on: https://gem5-review.googlesource.com/9541
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
fixes line length and white space issues.
Change-Id: Ia04a91ec68cae2bcdabeb93bb1a0f74e8e5486c3
Reviewed-on: https://gem5-review.googlesource.com/9801
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
|
|
Removal of unused/barely used 'using namespace' from C++ files.
Change-Id: I66dc548c04506db2e41180b9ea7ab5abd7d5375a
Reviewed-on: https://gem5-review.googlesource.com/9601
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Block insertion is being done in the getCandidates function, while the
insertBlock function does not do anything.
Besides, BaseTags' stats weren't being updated.
Change-Id: Iadab9c1ea61519214f66fa24c4b91c4fc95604c0
Reviewed-on: https://gem5-review.googlesource.com/8882
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a LRU Insertion Policy replacement policy.
Change-Id: I1a9aa0091ff2cdc1b1652c1d5ec7a3b33fba5b44
Reviewed-on: https://gem5-review.googlesource.com/9002
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a Bimodal Insertion Policy replacement policy.
Change-Id: Ife058d0d4310dbcb35858348006189f0b2bf7c37
Reviewed-on: https://gem5-review.googlesource.com/9003
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Instead of using raw memcpy, use the proper writer functions
from the Packet class in Cache.
Fixed typos in comments of these functions.
Change-Id: I156a00989c6cbaa73763349006a37a18243d6ed4
Reviewed-on: https://gem5-review.googlesource.com/9661
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
The recvTimingReq function in the cache always returns true. This
changeset removes the return value.
Change-Id: I00dddca65ee7224ecfa579ea5195c841dac02972
Reviewed-on: https://gem5-review.googlesource.com/8289
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
FALRU didn't initialize the blocks' data, causing seg faults.
This patch does not make FALRU functional yet.
Change-Id: I10cbcf5afc3f8bc357eeb8b7cb46789dec47ba8b
Reviewed-on: https://gem5-review.googlesource.com/9302
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a Least Frequently Used replacement policy.
Change-Id: I772afccd3a7955777e53d59341e922718db44e5c
Reviewed-on: https://gem5-review.googlesource.com/8890
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a Re-Reference Interval Prediction replacement
policy.
Change-Id: Iba716eb5df2bf2be156e765f889d94f6ad00c91b
Reviewed-on: https://gem5-review.googlesource.com/8981
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Implementation of a Bimodal Re-Reference Interval Prediction
replacement policy.
Change-Id: I25d4a59a60ef7ac496c66852e394fd6cbaf50912
Reviewed-on: https://gem5-review.googlesource.com/8891
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I67759a4532e8a46c1643d4c3a9c546ad6b565b81
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/9321
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Added fix in the invalid transition panic and various places in ruby
random tester.
Change-Id: I879264da58369faf7de49d1a28b2da1cb935ef0a
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/8941
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a First-In, First-Out replacement policy.
Change-Id: Id234ec9d29c092dd4516e609da14b8a75a96b5e4
Reviewed-on: https://gem5-review.googlesource.com/8888
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Rebase of MRU missed a const qualifier, introducing a compilation
error.
Change-Id: Ia25aa30523613a1a87593a353abe439946656f63
Reviewed-on: https://gem5-review.googlesource.com/9301
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Implementation of a Most Recently Used replacement policy.
Change-Id: Id52cb247ca25d4523dcc53490d113695dac6a3f1
Reviewed-on: https://gem5-review.googlesource.com/8889
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Replacement policies (LRU, Random) are currently considered as array
indexing methods, but have completely different functionalities:
- Array indexers determine the possible locations for block allocation.
This information is used to generate replacement candidates when
conflicts happen.
- Replacement policies determine which of the replacement candidates
should be evicted to make room for new allocations.
For this reason, they were split into different classes. Advantages:
- Easier and more straightforward to implement other replacement
policies (RRIP, LFU, ARC, ...)
- Allow easier future implementation of cache organization schemes
As now we can't assure the use of sets, the previous way to create a
true LRU is not viable. Now a timestamp_bits parameter controls how
many bits are dedicated for the timestamp, and a true LRU can be
achieved through an infinite number of bits (although a few bits suffice
in practice).
Change-Id: I23750db121f1474d17831137e6ff618beb2b3eda
Reviewed-on: https://gem5-review.googlesource.com/8501
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Block allocation can fail when there is an in-service MSHR that
operates on the victim block. This can happed due to:
* an upgrade operation: a request that needs a writable copy of the
block finds a shared (non-writable) copy of the block in the cache
and has allocates an MSHR for the pending upgrade operation, or
* a clean operation: a clean request finds a dirty copy of the block
and allocates an MSHR for the pending clean operation.
This changes relaxes an assertion to allow for the 2nd case (cache
clean operations).
Change-Id: Ib51482160b5f2b3702ed744b0eac2029d34bc9d4
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9021
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Only a small quantity of prefetches were issued, as the positive
feedback mechanism was not implemented. This commit adds a new
action po_observeHit, which notifies the RubyPrefetcher of
successful prefetches and resets the prefetch flag.
When a cache line was replaced by a prefetch, the wrong queue could
be stalled. This commit adds a new event PF_L1_Replacement, which
stalls the correct queue.
The behavior when receiving a prefetch or instruction fetch while
in PF_IS_I (prefetch caused GETs, but got invalidated before the
response was received) was undefined. This was changed to drop the
prefetch request or change the state to non-prefetch, respectively.
This behavior is analogous to IS_I (non-prefetch caused GETs, but
got invalidated before the response was received) and the data case,
respectively.
In my local branch a major (20+%) performance increase can be
observed in SPEC2006 gobmk and leslie3d when enabling the
prefetcher. Some other benchmarks like bwaves, GemsFDTD, sphinx and
wrf show smaller (~10%) performance increases. Unfortunately, the
performance in most other SPEC benchmarks is still poor, most likely
as the prefetcher does not detect strides fast/often enough. In
order to push the change timely (most benchmarks have runtimes in
the order of days on my machine even with the smallest parameters)
after checkout, I have only run gobmk with the base repository
+ this commit. The results match those of my local branch.
Change-Id: I9903a2fcd02060ea5e619b409f31f7d6fac47ae8
Reviewed-on: https://gem5-review.googlesource.com/8801
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Swapnil Haria <swapnilster@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Skewed caches need to know the way to regenerate a block address.
Change-Id: I62c61ac9509eff2f37bad36862751956db7a6e40
Reviewed-on: https://gem5-review.googlesource.com/8782
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
clang doesn't like inconsistent overrides. Add override to all overidden
functions in lru.hh
Change-Id: I100ff4a7d90757439afee879ff9838c15f5c0b1d
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/8861
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This change makes the cache block invalidation function in the
BaseTags and CacheBlk class virtual to enable derived classes.
Change-Id: I2e64b01c6ca637f16d10474fc8b08eeec3f23453
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8287
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
invalidate was defined as a separate function in the base associative
and fully-associative tags classes although both functions should
implement identical functionality. This patch moves the invalidate
function in the base tags class.
Change-Id: I206ee969b00ab9e05873c6d87531474fcd712907
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8286
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This lets them hook setCache, perhaps to set up additional state based
on the set cache.
Change-Id: Ic3b34fa43d052c71e8ef733a57fe47c70899cd27
Reviewed-on: https://gem5-review.googlesource.com/8701
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Starting with version 3, scons imposes using the print function instead
of the print statement in code it processes. To get things building
again, this change moves all python code within gem5 to use the
function version. Another change by another author separately made this
same change to the site_tools and site_init.py files.
Change-Id: I2de7dc3b1be756baad6f60574c47c8b7e80ea3b0
Reviewed-on: https://gem5-review.googlesource.com/8761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Merge 1ae7fced4d32898531a6875a339ef00e43e20e66 generated
a bug in tagsInUse calculation.
Change-Id: I079e327a0a26a7968f2ed8e433dd6e790c80998b
Reviewed-on: https://gem5-review.googlesource.com/8781
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Writebacks write data to either an existing block or a newly allocated
block. In either case we need to populate the whenReady field of the
block which will determine when the new value can be used.
Change-Id: I5788fad0b8086a1be96714639bf6a9470b334926
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8285
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Use placement policy specific block search within generic access.
Change-Id: I6070035e6e00595bcf073d4011f78a55ba7e7a8a
Reviewed-on: https://gem5-review.googlesource.com/8721
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
