summaryrefslogtreecommitdiff
path: root/src/python
AgeCommit message (Collapse)Author
2014-09-03config: Change parsing of Addr so hex values work from scriptsMitch Hayenga
When passed from a configuration script with a hexadecimal value (like "0x80000000"), gem5 would error out. This is because it would call "toMemorySize" which requires the argument to end with a size specifier (like 1MB, etc). This modification makes it so raw hex values can be passed through Addr parameters from the configuration scripts.
2014-09-01ruby: message buffers: significant changesNilay Vaish
This patch is the final patch in a series of patches. The aim of the series is to make ruby more configurable than it was. More specifically, the connections between controllers are not at all possible (unless one is ready to make significant changes to the coherence protocol). Moreover the buffers themselves are magically connected to the network inside the slicc code. These connections are not part of the configuration file. This patch makes changes so that these connections will now be made in the python configuration files associated with the protocols. This requires each state machine to expose the message buffers it uses for input and output. So, the patch makes these buffers configurable members of the machines. The patch drops the slicc code that usd to connect these buffers to the network. Now these buffers are exposed to the python configuration system as Master and Slave ports. In the configuration files, any master port can be connected any slave port. The file pyobject.cc has been modified to take care of allocating the actual message buffer. This is inline with how other port connections work.
2014-08-10config: Add hooks to enable new config sysGeoffrey Blake
This patch adds helper functions to SimObject.py, params.py and simulate.py to enable the new configuration system. Functions like enumerateParams() in SimObject lets the config system auto-generate command line options for simobjects to be modified on the command line. Params in params.py have __call__() added to their definition to allow the argparse module to use them as a type to check command input is in the proper format.
2014-05-09cpu: Add flag name printing to StaticInstAndrew Bardsley
This patch adds a the member function StaticInst::printFlags to allow all of an instruction's flags to be printed without using the individual is... member functions or resorting to exposing the 'flags' vector It also replaces the enum definition StaticInst::Flags with a Python-generated enumeration and adds to the enum generation mechanism in src/python/m5/params.py to allow Enums to be placed in namespaces other than Enums or, alternatively, in wrapper structs allowing them to be inherited by other classes (so populating that class's name-space with the enumeration element names).
2014-05-09config: Avoid generating a reference to myself for Parent.anyGeoffrey Blake
The unproxy code for Parent.any can generate a circular reference in certain situations with classes hierarchies like those in ClockDomain.py. This patch solves this by marking ouself as visited to make sure the search does not resolve to a self-reference.
2014-05-09scons: Require SWIG >= 2.0.4 and remove vector typemapsCurtis Dunham
SWIG commit fd666c1 (*) made it unnecessary for gem5 to have these typemaps to handle Vector types. * https://github.com/swig/swig/commit/fd666c1440628a847793bbe1333c27dfa2f757f0
2014-04-23misc: Proper type check and import for PortRefSascha Bischoff
Rewriting the type checking around PortRef, which was interacting strangely with other Python scripts. Tested-by: stephan.diestelhorst@arm.com
2014-02-10stats: better error message for uninitialized statisticCurtis Dunham
As suggested by Nathan Binkert in 2008: http://permalink.gmane.org/gmane.comp.emulators.m5.users/2676
2014-03-23misc: Fix -q (quiet) flagStan Czerniawski
Check the right flag.
2014-01-24base: add support for probe points and common probesMatt Horsnell
The probe patch is motivated by the desire to move analytical and trace code away from functional code. This is achieved by the probe interface which is essentially a glorified observer model. What this means to users: * add a probe point and a "notify" call at the source of an "event" * add an isolated module, that is being used to carry out *your* analysis (e.g. generate a trace) * register that module as a probe listener Note: an example is given for reference in src/cpu/o3/simple_trace.[hh|cc] and src/cpu/SimpleTrace.py What is happening under the hood: * every SimObject maintains has a ProbeManager. * during initialization (src/python/m5/simulate.py) first regProbePoints and the regProbeListeners is called on each SimObject. this hooks up the probe point notify calls with the listeners. FAQs: Why did you develop probe points: * to remove trace, stats gathering, analytical code out of the functional code. * the belief that probes could be generically useful. What is a probe point: * a probe point is used to notify upon a given event (e.g. cpu commits an instruction) What is a probe listener: * a class that handles whatever the user wishes to do when they are notified about an event. What can be passed on notify: * probe points are templates, and so the user can generate probes that pass any type of argument (by const reference) to a listener. What relationships can be generated (1:1, 1:N, N:M etc): * there isn't a restriction. You can hook probe points and listeners up in a 1:1, 1:N, N:M relationship. They become useful when a number of modules listen to the same probe points. The idea being that you can add a small number of probes into the source code and develop a larger number of useful analysis modules that use information passed by the probes. Can you give examples: * adding a probe point to the cpu's commit method allows you to build a trace module (outputting assembler), you could re-use this to gather instruction distribution (arithmetic, load/store, conditional, control flow) stats. Why is the probe interface currently restricted to passing a const reference: * the desire, initially at least, is to allow an interface to observe functionality, but not to change functionality. * of course this can be subverted by const-casting. What is the performance impact of adding probes: * when nothing is actively listening to the probes they should have a relatively minor impact. Profiling has suggested even with a large number of probes (60) the impact of them (when not active) is very minimal (<1%).
2014-01-24config: Make the Clock a Tick parameter like Latency/FrequencyAndreas Hansson
This patch makes the Clock a TickParamValue just like Latency/Frequency. There is no longer any need to distinguish it (originally needed to support multiplication).
2014-01-03python: provide better error message for wrapped C++ methodsSteve Reinhardt
If you successfully export a C++ SimObject method, but try to invoke it from Python before the C++ object is created, you get a confusing error that says the attribute does not exist, making you question whether you successfully exported the method at all. In reality, your only problem is that you're calling the method too soon. This patch enhances the error message to give you a better clue.
2014-01-03python: don't die on assignment to cloned objectSteve Reinhardt
Updating the SimObject topology of a cloned hierarchy is a little dangerous, in that cloning is a "deep copy" and the clone does not inherit SimObject updates the same way it would inherit scalar variable assignments. However, because of various SimObject-valued proxy parameters, like 'memories', 'clk_domain', and 'system', it turns out that there are a number of implicit topology changes that happen at instantiation, which means that these changes are impossible to avoid. So in order to make cloning systems useful, this error has to go. Changing it to a warning produces a lot of noise, so it seems best just to delete it.
2013-12-03sim: reset stats after startupNilay Vaish
Currently statistics are reset after the initial / checkpoint state has been loaded. But ruby does some checkpoint processing in its startup() function. So the stats need to be reset after the startup() function has been called. This patch moves the class to stats.reset() to achieve this change in functionality.
2013-11-25sim: simulate with multiple threads and event queuesSteve Reinhardt ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E%2C%20Ali%20Saidi%20%3CAli.Saidi%40ARM.com%3E)
This patch adds support for simulating with multiple threads, each of which operates on an event queue. Each sim object specifies which eventq is would like to be on. A custom barrier implementation is being added using which eventqs synchronize. The patch was tested in two different configurations: 1. ruby_network_test.py: in this simulation L1 cache controllers receive requests from the cpu. The requests are replied to immediately without any communication taking place with any other level. 2. twosys-tsunami-simple-atomic: this configuration simulates a client-server system which are connected by an ethernet link. We still lack the ability to communicate using message buffers or ports. But other things like simulation start and end, synchronizing after every quantum are working. Committed by: Nilay Vaish
2013-11-14tests: suppress output on switcheroo testsSteve Reinhardt
The output from the switcheroo tests is voluminous and (because it includes timestamps) highly sensitive to minor changes, leading to extremely large updates to the reference outputs. This patch addresses this problem by suppressing output from the tests. An internal parameter can be set to enable the output. Wiring that up to a command-line flag (perhaps even the rudimantary -v/-q options in m5/main.py) is left for future work.
2013-11-01sim: Clarify the difference between tracing and debuggingAndreas Hansson
This patch changes the name the command-line options related to debug output to all start with "debug" rather than being a mix of that and "trace". It also makes it clear that the breakpoint time is specified in ticks and not in cycles.
2013-10-31config: Fix handling of parents for simobject vectorsGeoffrey Blake
SimObjectVector objects did not provide the same interface to the _parent attribute through get_parent() like a normal SimObject. It also handled assigning a _parent incorrectly if objects in a SimObjectVector were changed post-creation, leading to errors later when the simulator tried to execute. This patch fixes these two omissions.
2013-10-17config: Fix ommission of number base in ethernet address paramGeoffrey Blake
The ethernet address param tries to convert a hexadecimal string using int() in python, which defaults to base 10, need to specify base 16 in this case.
2013-10-17config: Fix for port references generated multiple timesGeoffrey Blake
SimObjects are expected to only generate one port reference per port belonging to them. There is a subtle bug with using "not" here as a VectorPort is seen as not having a reference if it is either None or empty as per Python docs sec 9.9 for Standard operators. Intended behavior is to only check if we have not created the reference.
2013-09-18swig: Fix issue with circular import in 2.0.9/2.0.10Andreas Hansson
This patch fixes an issue which prevented gem5 from running when built using swig 2.0.9 and 2.0.10. The generated event.py tried to import m5.internal which in turn relied on importing event. This patch seems to fix the problem, and so far has not caused any other issues.
2013-09-04util: Add ini string as tooltip info in dot outputAndreas Hansson
This patch adds the config ini string as a tooltip that can be displayed in most browsers rendering the resulting svg. Certain characters are modified for HTML output. Tested on chrome and firefox.
2013-09-04util: Add colours to the dot outputAndreas Hansson
This patch is adding a splash of colour to the dot output to make it easier to distinguish objects of different types. As a bonus, the pastel-colour palette also makes the output look like a something from the 21st century.
2013-09-04util: Add class name to dot graph and output to svgAndreas Hansson
This patch adds the class name to the label, creates some more space by increasing the rank separation, and additionally outputs the graph as an editable SVG in addition to the PDF.
2013-09-04arch: Resurrect the NOISA build target and rename it NULLAndreas Hansson
This patch makes it possible to once again build gem5 without any ISA. The main purpose is to enable work around the interconnect and memory system without having to build any CPU models or device models. The regress script is updated to include the NULL ISA target. Currently no regressions make use of it, but all the testers could (and perhaps should) transition to it. --HG-- rename : build_opts/NOISA => build_opts/NULL rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
2013-08-19power: Add voltage domains to the clock domainsAkash Bagdia
This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-07-18sim: Make MaxTick in Python match the one in C++Andreas Hansson
This patch aligns the MaxTick in Python with the one in C++. Thus, both reflect the maximum value that an unsigned 64-bit integer can have.
2013-06-27config: Remove Clock parameter multiplicationAndreas Hansson
This patch removes the multiplication operator support for Clock parameters as this functionality is now achieved by creating derived clock domains. Nate, this one is for you.
2013-06-03base: Make the Python module loader PEP302 compliantAndreas Sandberg
The custom Python loader didn't comply with PEP302 for two reasons: * Previously, we would overwrite old modules on name conflicts. PEP302 explicitly states that: "If there is an existing module object named 'fullname' in sys.modules, the loader must use that existing module". * The "__package__" attribute wasn't set. PEP302: "The __package__ attribute must be set." This changeset addresses both of these issues.
2013-02-19scons: Add warning for missing declarationsAndreas Hansson
This patch enables warnings for missing declarations. To avoid issues with SWIG-generated code, the warning is only applied to non-SWIG code.
2013-02-19x86: Move APIC clock divider to PythonAndreas Hansson
This patch moves the 16x APIC clock divider to the Python code to avoid the post-instantiation modifications to the clock. The x86 APIC was the only object setting the clock after creation time and this required some custom functionality and configuration. With this patch, the clock multiplier is moved to the Python code and the objects are instantiated with the appropriate clock.
2013-02-15base: Add warn() and inform() to m5.utils for use from pythonSascha Bischoff
This patch adds two fuctions to m5.util, warn and inform, which mirror those found in the C++ side of gem5. These are added in addition to the already existing m5.util.panic and m5.util.fatal which already mirror the C++ functionality. This ensures that warning and information messages generated by python are in the same format as those generated by C++. Occurrences of print "Warning: %s..." % name have been replaced with warn("%s...", name)
2013-02-15sim: Add a system-global option to bypass cachesAndreas Sandberg
Virtualized CPUs and the fastmem mode of the atomic CPU require direct access to physical memory. We currently require caches to be disabled when using them to prevent chaos. This is not ideal when switching between hardware virutalized CPUs and other CPU models as it would require a configuration change on each switch. This changeset introduces a new version of the atomic memory mode, 'atomic_noncaching', where memory accesses are inserted into the memory system as atomic accesses, but bypass caches. To make memory mode tests cleaner, the following methods are added to the System class: * isAtomicMode() -- True if the memory mode is 'atomic' or 'direct'. * isTimingMode() -- True if the memory mode is 'timing'. * bypassCaches() -- True if caches should be bypassed. The old getMemoryMode() and setMemoryMode() methods should never be used from the C++ world anymore.
2013-02-15config: Move CPU handover logic to m5.switchCpus()Andreas Sandberg
CPU switching consists of the following steps: 1. Drain the system 2. Switch out old CPUs (cpu.switchOut()) 3. Change the system timing mode to the mode the new CPUs require 4. Flush caches if switching to hardware virtualization 5. Inform new CPUs of the handover (cpu.takeOverFrom()) 6. Resume the system m5.switchCpus() previously only did step 2 & 5. Since information about the new processors' memory system requirements is now exposed, do all of the steps above. This patch adds automatic memory system switching and flush (if needed) to switchCpus(). Additionally, it adds optional draining to switchCpus(). This has the following implications: * changeToTiming and changeToAtomic are no longer needed, so they have been removed. * changeMemoryMode is only used internally, so it is has been renamed to be private. * switchCpus requires a reference to the system containing the CPUs as its first parameter. WARNING: This changeset breaks compatibility with existing configuration scripts since it changes the signature of m5.switchCpus().
2013-02-10base: Add support for newer versions of IPythonAndreas Sandberg
IPython is used for the interactive gem5 shell if it exists. IPython made API changes in version 0.11. This patch adds support for IPython version 0.11 and above. --HG-- extra : rebase_source : 5388d0919adb58d97f49a1a637db48cba61283a3
2013-02-10base: Fix broken IPython argument handlingAndreas Sandberg
Prior to this changeset, we used to clear sys.argv before entering the IPython shell. This caused some versions of IPython to crash because they assume argv[0] to exist. The correct way of overriding the arguments passed to IPython is to set the argv keyword argument when initializing the shell.
2013-01-07stats: Fix swig wrapping for Tick in statsSascha Bischoff
Tick was not correctly wrapped for the stats system, and therefore it was not possible to configure the stats dumping from the python scripts without defining Ticks as long long. This patch fixes the wrapping of Tick by copying the typemap of uint64_t to Tick.
2013-01-07cpu: Introduce sanity checks when switching between CPUsAndreas Sandberg
This patch introduces the following sanity checks when switching between CPUs: * Check that the set of new and old CPUs do not overlap. Having an overlap between the set of new CPUs and the set of old CPUs is currently not supported. Doing such a switch used to result in the following assertion error: BaseCPU::takeOverFrom(BaseCPU*): \ Assertion `!new_itb_port->isConnected()' failed. * Check that all new CPUs are in the switched out state. * Check that all old CPUs are in the switched in state.
2013-01-07mem: Add interleaving bits to the address rangesAndreas Hansson
This patch adds support for interleaving bits for the address ranges. What was previously just a start and end address, now has an additional three fields, for the high bit, and number of bits to use for interleaving, and a match value to compare against. If the number of interleaving bits is set to zero it is effectively disabled. A number of convenience functions are added to the range to enquire about the interleaving, its granularity and the number of stripes it is part of.
2013-01-07config: Traverse lists when visiting children in all proxyAndreas Hansson
This patch makes the all proxy traverse any potential list that is encountered in the object hierarchy instead of only looking at children that are SimObjects. An example of where this is useful is when creating a multi-channel memory system as a list of controllers, whilst ensuring that the memories are still visible in the system.
2012-11-16sim: have a curTick per eventqNilay Vaish
This patch adds a _curTick variable to an eventq. This variable is updated whenever an event is serviced in function serviceOne(), or all events upto a particular time are processed in function serviceEvents(). This change helps when there are eventqs that do not make use of curTick for scheduling events.
2012-11-02sim: Add drain methods to request additional cleanup operationsAndreas Sandberg
This patch adds the following two methods to the Drainable base class: memWriteback() - Write back all dirty cache lines to memory using functional accesses. memInvalidate() - Invalidate memory system buffers. Dirty data won't be written back. Specifying calling memWriteback() after draining will allow us to checkpoint systems with caches. memInvalidate() can be used to drop memory system buffers in preparation for switching to an accelerated CPU model that bypasses the gem5 memory system (e.g., hardware virtualized CPUs). Note: This patch only adds the methods to Drainable, the code for flushing the TLB and the cache is committed separately.
2012-11-02sim: Add SWIG interface for SerializableAndreas Sandberg
This changeset adds a SWIG interface for the Serializable class, which fixes a warning when compiling the SWIG interface for the event queue. Currently, the only method exported is the name() method.
2012-11-02python: Rename doDrain()->drain() and make it do the right thingAndreas Sandberg
There is no point in exporting the old drain() method in Simulate.py. It should only be used internally by doDrain(). This patch moves the old drain() method into doDrain() and renames doDrain() to drain().
2012-11-02sim: Reuse the code to change memory mode.Andreas Sandberg
changeToAtomic and changeToTiming both do essentially the same thing, they check the type of their input argument, drain the system, and switch to the desired memory mode. This patch moves all of that code to a separate method (changeMemoryMode) and calls that from both changeToAtomic and changeToTiming.
2012-11-02sim: Move the draining interface into a separate base classAndreas Sandberg
This patch moves the draining interface from SimObject to a separate class that can be used by any object needing draining. However, objects not visible to the Python code (i.e., objects not deriving from SimObject) still depend on their parents informing them when to drain. This patch also gets rid of the CountedDrainEvent (which isn't really an event) and replaces it with a DrainManager.
2012-11-02sim: Include object header files in SWIG interfacesAndreas Sandberg
When casting objects in the generated SWIG interfaces, SWIG uses classical C-style casts ( (Foo *)bar; ). In some cases, this can degenerate into the equivalent of a reinterpret_cast (mainly if only a forward declaration of the type is available). This usually works for most compilers, but it is known to break if multiple inheritance is used anywhere in the object hierarchy. This patch introduces the cxx_header attribute to Python SimObject definitions, which should be used to specify a header to include in the SWIG interface. The header should include the declaration of the wrapped object. We currently don't enforce header the use of the header attribute, but a warning will be generated for objects that do not use it.
2012-11-02Partly revert [4f54b0f229b5] and move draining to m5.changeToTimingAndreas Sandberg
Changeset 4f54b0f229b5 removed the call to doDrain in changeToTiming based on the assumption that the system does not need draining when running in atomic mode. This is a false assumption since at least the System class requires the system to be drained before it allows switching of memory modes. This patch reverts that part of the changeset.
2012-10-15Port: Add protocol-agnostic ports in the port hierarchyAndreas Hansson
This patch adds an additional level of ports in the inheritance hierarchy, separating out the protocol-specific and protocl-agnostic parts. All the functionality related to the binding of ports is now confined to use BaseMaster/BaseSlavePorts, and all the protocol-specific parts stay in the Master/SlavePort. In the future it will be possible to add other protocol-specific implementations. The functions used in the binding of ports, i.e. getMaster/SlavePort now use the base classes, and the index parameter is updated to use the PortID typedef with the symbolic InvalidPortID as the default.
2012-10-15Param: Fix proxy traversal to support chained proxiesAndreas Hansson
This patch modifies how proxies are traversed and unproxied to allow chained proxies. The issue that is solved manifested itself when a proxy during its evaluation ended up being hitting another proxy, and the second one got evaluated using the object that was originally used for the first proxy. For a more tangible example, see the following patch on making the default clock being inherited from the parent. In this patch, the CPU clock is a proxy Parent.clock, which is overridden in the system to be an actual value. This all works fine, but the AlphaLinuxSystem has a boot_cpu_frequency parameter that is Self.cpu[0].clock.frequency. When the latter is evaluated, it all happens relative to the current object of the proxy, i.e. the system. Thus the cpu.clock is evaluated as Parent.clock, but using the system rather than the cpu as the object to enquire.