summaryrefslogtreecommitdiff
path: root/src/sim/System.py
AgeCommit message (Collapse)Author
2015-02-16mem: mmap the backing store with MAP_NORESERVEAndreas Hansson
This patch ensures we can run simulations with very large simulated memories (at least 64 TB based on some quick runs on a Linux workstation). In essence this allows us to efficiently deal with sparse address maps without having to implement a redirection layer in the backing store. This opens up for run-time errors if we eventually exhausts the hosts memory and swap space, but this should hopefully never happen.
2014-08-13sim: remove kernel mapping check for baremetal workloadsDam Sunwoo
Baremetal workloads are specified using the "kernel" parameter, but don't always have the correct address mappings. This patch adds a boolean flag to the system and bypasses the kernel addr mapping checks when running in baremetal mode.
2014-06-30power: Add basic DVFS support for gem5Stephan Diestelhorst
Adds DVFS capabilities to gem5, by allowing users to specify lists for frequencies and voltages in SrcClockDomains and VoltageDomains respectively. A separate component, DVFSHandler, provides a small interface to change operating points of the associated domains. Clock domains will be linked to voltage domains and thus allow separate clock, but shared voltage lines. Currently all the valid performance-level updates are performed with a fixed transition latency as specified for the domain. Config file example: ... vd = VoltageDomain(voltage = ['1V','0.95V','0.90V','0.85V']) tsys.cluster1.clk_domain.clock = ['1GHz','700MHz','400MHz','230MHz'] tsys.cluster2.clk_domain.clock = ['1GHz','700MHz','400MHz','230MHz'] tsys.cluster1.clk_domain.domain_id = 0 tsys.cluster2.clk_domain.domain_id = 1 tsys.cluster1.clk_domain.voltage_domain = vd tsys.cluster2.clk_domain.voltage_domain = vd tsys.dvfs_handler.domains = [tsys.cluster1.clk_domain, tsys.cluster2.clk_domain] tsys.dvfs_handler.enable = True
2014-01-24arm: Add support for ARMv8 (AArch64 & AArch32)ARM gem5 Developers
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2013-07-18mem: Set the cache line size on a system levelAndreas Hansson
This patch removes the notion of a peer block size and instead sets the cache line size on the system level. Previously the size was set per cache, and communicated through the interconnect. There were plenty checks to ensure that everyone had the same size specified, and these checks are now removed. Another benefit that is not yet harnessed is that the cache line size is now known at construction time, rather than after the port binding. Hence, the block size can be locally stored and does not have to be queried every time it is used. A follow-on patch updates the configuration scripts accordingly.
2013-06-27config: Add a system clock command-line optionAkash Bagdia
This patch adds a 'sys_clock' command-line option and use it to assign clocks to the system during instantiation. As part of this change, the default clock in the System class is removed and whenever a system is instantiated a system clock value must be set. A default value is provided for the command-line option. The configs and tests are updated accordingly.
2013-02-15sim: Add a system-global option to bypass cachesAndreas Sandberg
Virtualized CPUs and the fastmem mode of the atomic CPU require direct access to physical memory. We currently require caches to be disabled when using them to prevent chaos. This is not ideal when switching between hardware virutalized CPUs and other CPU models as it would require a configuration change on each switch. This changeset introduces a new version of the atomic memory mode, 'atomic_noncaching', where memory accesses are inserted into the memory system as atomic accesses, but bypass caches. To make memory mode tests cleaner, the following methods are added to the System class: * isAtomicMode() -- True if the memory mode is 'atomic' or 'direct'. * isTimingMode() -- True if the memory mode is 'timing'. * bypassCaches() -- True if caches should be bypassed. The old getMemoryMode() and setMemoryMode() methods should never be used from the C++ world anymore.
2013-01-07config: Do not use hardcoded physmem in fs scriptAndreas Hansson
This patch generalises the address range resolution for the I/O cache and I/O bridge such that they do not assume a single memory. The patch involves adding a parameter to the system which is then defined based on the memories that are to be visible from the I/O subsystem, whether behind a cache or a bridge. The change is needed to allow interleaved memory controllers in the system.
2012-11-02sim: Include object header files in SWIG interfacesAndreas Sandberg
When casting objects in the generated SWIG interfaces, SWIG uses classical C-style casts ( (Foo *)bar; ). In some cases, this can degenerate into the equivalent of a reinterpret_cast (mainly if only a forward declaration of the type is available). This usually works for most compilers, but it is known to break if multiple inheritance is used anywhere in the object hierarchy. This patch introduces the cxx_header attribute to Python SimObject definitions, which should be used to specify a header to include in the SWIG interface. The header should include the declaration of the wrapped object. We currently don't enforce header the use of the header attribute, but a warning will be generated for objects that do not use it.
2012-10-25dev: Make default clock more reasonable for system and devicesAndreas Hansson
This patch changes the default system clock from 1THz to 1GHz. This clock is used by all modules that do not override the default (parent clock), and primarily affects the IO subsystem. Every DMA device uses its clock to schedule the next transfer, and the change will thus cause this inter-transfer delay to be longer. The default clock of the bus is removed, as the clock inherited from the system provides exactly the same value. A follow-on patch will bump the stats.
2012-10-15Clock: Inherit the clock from parent by defaultAndreas Hansson
This patch changes the default 1 Tick clock period to a proxy that resolves the parents clock. As a result of this, the caches and L1-to-L2 bus, for example, will automatically use the clock period of the CPU unless explicitly overridden. To ensure backwards compatibility, the System class overrides the proxy and specifies a 1 Tick clock. We could change this to something more reasonable in a follow-on patch, perhaps 1 GHz or something similar. With this patch applied, all clocked objects should have a reasonable clock period set, and could start specifying delays in Cycles instead of absolute time.
2012-04-06MEM: Enable multiple distributed generalized memoriesAndreas Hansson
This patch removes the assumption on having on single instance of PhysicalMemory, and enables a distributed memory where the individual memories in the system are each responsible for a single contiguous address range. All memories inherit from an AbstractMemory that encompasses the basic behaviuor of a random access memory, and provides untimed access methods. What was previously called PhysicalMemory is now SimpleMemory, and a subclass of AbstractMemory. All future types of memory controllers should inherit from AbstractMemory. To enable e.g. the atomic CPU and RubyPort to access the now distributed memory, the system has a wrapper class, called PhysicalMemory that is aware of all the memories in the system and their associated address ranges. This class thus acts as an infinitely-fast bus and performs address decoding for these "shortcut" accesses. Each memory can specify that it should not be part of the global address map (used e.g. by the functional memories by some testers). Moreover, each memory can be configured to be reported to the OS configuration table, useful for populating ATAG structures, and any potential ACPI tables. Checkpointing support currently assumes that all memories have the same size and organisation when creating and resuming from the checkpoint. A future patch will enable a more flexible re-organisation. --HG-- rename : src/mem/PhysicalMemory.py => src/mem/AbstractMemory.py rename : src/mem/PhysicalMemory.py => src/mem/SimpleMemory.py rename : src/mem/physical.cc => src/mem/abstract_mem.cc rename : src/mem/physical.hh => src/mem/abstract_mem.hh rename : src/mem/physical.cc => src/mem/simple_mem.cc rename : src/mem/physical.hh => src/mem/simple_mem.hh
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-16Merge yet again with the main repository.Gabe Black
2012-01-17MEM: Add the system port as a central access pointAndreas Hansson
The system port is used as a globally reachable access point to the memory subsystem. The benefit of using an actual port is that the usual infrastructure is used to resolve any access and thus makes the overall system able to handle distributed memories in any configuration, and also makes the accesses agnostic to the address map. This patch only introduces the port and does not actually use it for anything.
2012-01-09sim: Enable sampling of run-time for code-sections marked using pseudo insts.Prakash Ramrakhyani
This patch adds a mechanism to collect run time samples for specific portions of a benchmark, using work_begin and work_end pseudo instructions.It also enhances the histogram stat to report geometric mean.
2012-01-07Merge with main repository.Gabe Black
2011-10-30System: Push boot_cpu_frequency down into the subclasses that actually use it.Gabe Black
This parameter depends on a number of coincidences to work properly. First, there must be an array assigned to system called "cpu" even though there's no parameter called that. Second, the items in the "cpu" array have to have a "clock" parameter which has a "frequency" member. This is true of the normal CPUs, but isn't true of the memory tester CPUs. This happened to work before because the memory tester CPUs were only used in SE mode where this parameter was being excluded. Since everything is being pulled into a common binary, this won't work any more. Since the boot_cpu_frequency parameter is only used by Alpha's Linux System object (and Mips's through copy and paste), the definition of that parameter is moved down to those objects specifically.
2011-10-30SE/FS: Make the system object more consistent between SE and FS.Gabe Black
2011-10-20SimObject: add export_method* hooks to export C++ methods to PythonSteve Reinhardt
Replace the (broken as of previous changeset) swig_objdecl() method that allowed/forced you to substitute a whole new C++ struct definition for SWIG to wrap with a set of export_method* hooks that let you just declare a set of C++ methods (or other declarations) that get inserted in the auto-generated struct. Restore the System get/setMemoryMode methods, and use this mechanism to specialize SimObject as well, eliminating teh need for sim_object.i. Needed bits of sim_object.i are moved to the new pyobject.i. Also sucked a little SimObject specialization into cxx_param_decl() allowing us to get rid of src/sim/sim_object_params.hh. Now the generation and wrapping of the base SimObject param struct is more in line with how derived objects are handled. --HG-- rename : src/python/swig/sim_object.i => src/python/swig/pyobject.i
2011-10-20scons/swig: refactor some of the scons/SWIG codeSteve Reinhardt
- Move the random bits of SWIG code generation out of src/SConscript file and into methods on the objects being wrapped. - Cleaned up some variable naming and added some comments to make the process a little clearer. - Did a little generated file/module renaming: - vptype_Foo now Foo_vector - init_Foo is now Foo_init This makes it easier to see all the Foo-related files in a sorted directory listing. - Made cxx_predecls and swig_predecls normal SimObject classmethods. - Got rid of swig_objdecls hook, even though this breaks the System objects get/setMemoryMode method exports. Will be fixing this in a future changeset.
2011-07-10O3: Make sure fetch doesn't go off into the weeds during speculation.Ali Saidi
2011-02-06m5: added work completed monitoring supportBrad Beckmann
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2010-09-09scons: use code_formatter wherever we can in the build systemNathan Binkert
2010-08-23Loader: Make the load address mask be a parameter of the system rather than ↵Ali Saidi
a constant. This allows one two different OS requirements for the same ISA to be handled. Some OSes are compiled for a virtual address and need to be loaded into physical memory that starts at address 0, while other bare metal tools generate images that start at address 0.
2009-09-22python: Move more code into m5.util allow SCons to use that code.Nathan Binkert
Get rid of misc.py and just stick misc things in __init__.py Move utility functions out of SCons files and into m5.util Move utility type stuff from m5/__init__.py to m5/util/__init__.py Remove buildEnv from m5 and allow access only from m5.defines Rename AddToPath to addToPath while we're moving it to m5.util Rename read_command to readCommand while we're moving it Rename compare_versions to compareVersions while we're moving it. --HG-- rename : src/python/m5/convert.py => src/python/m5/util/convert.py rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-01-29Fix typoNathan Binkert
2007-08-02python: Improve support for python calling back to C++ member functions.Nathan Binkert
Add support for declaring SimObjects to swig so their members can be wrapped. Make sim_object.i only contain declarations for SimObject. Create system.i to contain declarations for System. Update python code to properly call the C++ given the new changes. --HG-- extra : convert_revision : 82076ee69e8122d56e91b92d6767e356baae420a
2007-06-20Make sure all parameters have default values if they'reNathan Binkert
supposed to and make sure parameters have the right type. Also make sure that any object that should be an intermediate type has the right options set. --HG-- extra : convert_revision : d56910628d9a067699827adbc0a26ab629d11e93
2007-05-27Move SimObject python files alongside the C++ and fixNathan Binkert
the SConscript files so that only the objects that are actually available in a given build are compiled in. Remove a bunch of files that aren't used anymore. --HG-- rename : src/python/m5/objects/AlphaTLB.py => src/arch/alpha/AlphaTLB.py rename : src/python/m5/objects/SparcTLB.py => src/arch/sparc/SparcTLB.py rename : src/python/m5/objects/BaseCPU.py => src/cpu/BaseCPU.py rename : src/python/m5/objects/FuncUnit.py => src/cpu/FuncUnit.py rename : src/python/m5/objects/IntrControl.py => src/cpu/IntrControl.py rename : src/python/m5/objects/MemTest.py => src/cpu/memtest/MemTest.py rename : src/python/m5/objects/FUPool.py => src/cpu/o3/FUPool.py rename : src/python/m5/objects/FuncUnitConfig.py => src/cpu/o3/FuncUnitConfig.py rename : src/python/m5/objects/O3CPU.py => src/cpu/o3/O3CPU.py rename : src/python/m5/objects/OzoneCPU.py => src/cpu/ozone/OzoneCPU.py rename : src/python/m5/objects/SimpleOzoneCPU.py => src/cpu/ozone/SimpleOzoneCPU.py rename : src/python/m5/objects/BadDevice.py => src/dev/BadDevice.py rename : src/python/m5/objects/Device.py => src/dev/Device.py rename : src/python/m5/objects/DiskImage.py => src/dev/DiskImage.py rename : src/python/m5/objects/Ethernet.py => src/dev/Ethernet.py rename : src/python/m5/objects/Ide.py => src/dev/Ide.py rename : src/python/m5/objects/Pci.py => src/dev/Pci.py rename : src/python/m5/objects/Platform.py => src/dev/Platform.py rename : src/python/m5/objects/SimConsole.py => src/dev/SimConsole.py rename : src/python/m5/objects/SimpleDisk.py => src/dev/SimpleDisk.py rename : src/python/m5/objects/Uart.py => src/dev/Uart.py rename : src/python/m5/objects/AlphaConsole.py => src/dev/alpha/AlphaConsole.py rename : src/python/m5/objects/Tsunami.py => src/dev/alpha/Tsunami.py rename : src/python/m5/objects/T1000.py => src/dev/sparc/T1000.py rename : src/python/m5/objects/Bridge.py => src/mem/Bridge.py rename : src/python/m5/objects/Bus.py => src/mem/Bus.py rename : src/python/m5/objects/MemObject.py => src/mem/MemObject.py rename : src/python/m5/objects/PhysicalMemory.py => src/mem/PhysicalMemory.py rename : src/python/m5/objects/BaseCache.py => src/mem/cache/BaseCache.py rename : src/python/m5/objects/CoherenceProtocol.py => src/mem/cache/coherence/CoherenceProtocol.py rename : src/python/m5/objects/Repl.py => src/mem/cache/tags/Repl.py rename : src/python/m5/objects/Process.py => src/sim/Process.py rename : src/python/m5/objects/Root.py => src/sim/Root.py rename : src/python/m5/objects/System.py => src/sim/System.py extra : convert_revision : 173f8764bafa8ef899198438fa5573874e407321