summaryrefslogtreecommitdiff
path: root/src/sim/process.cc
AgeCommit message (Collapse)Author
2013-04-17base: load weak symbols from object fileDeyuan Guo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
Without loading weak symbols into gem5, some function names and the given PC cannot correspond correctly, because the binding attributes of unction names in an ELF file are not only STB_GLOBAL or STB_LOCAL, but also STB_WEAK. This patch adds a function for loading weak symbols. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-03-02sim: remove duplicate check on stack sizeNilay Vaish
2013-02-19scons: Fix up numerous warnings about name shadowingAndreas Hansson
This patch address the most important name shadowing warnings (as produced when using gcc/clang with -Wshadow). There are many locations where constructor parameters and function parameters shadow local variables, but these are left unchanged.
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-06process: add progName() virtual functionSteve Reinhardt
This replaces a (potentially uninitialized) string field with a virtual function so that we can have a safe interface without requiring changes to the eio code.
2012-07-10Add hook to call map() on Process from python.Steve Reinhardt
This enables configuration scripts to set up mappings from process virtual addresses to specific physical addresses in SE mode. This feature is needed to support modeling of user-accessible memories or devices in SE mode, avoiding the complexities of FS mode and the need to write a device driver.
2012-02-24MEM: Make port proxies use references rather than pointersAndreas Hansson
This patch is adding a clearer design intent to all objects that would not be complete without a port proxy by making the proxies members rathen than dynamically allocated. In essence, if NULL would not be a valid value for the proxy, then we avoid using a pointer to make this clear. The same approach is used for the methods using these proxies, such as loadSections, that now use references rather than pointers to better reflect the fact that NULL would not be an acceptable value (in fact the code would break and that is how this patch started out). Overall the concept of "using a reference to express unconditional composition where a NULL pointer is never valid" could be done on a much broader scale throughout the code base, but for now it is only done in the locations affected by the proxies.
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31clang: Enable compiling gem5 using clang 2.9 and 3.0Koan-Sin Tan
This patch adds the necessary flags to the SConstruct and SConscript files for compiling using clang 2.9 and later (on Ubuntu et al and OSX XCode 4.2), and also cleans up a bunch of compiler warnings found by clang. Most of the warnings are related to hidden virtual functions, comparisons with unsigneds >= 0, and if-statements with empty bodies. A number of mismatches between struct and class are also fixed. clang 2.8 is not working as it has problems with class names that occur in multiple namespaces (e.g. Statistics in kernel_stats.hh). clang has a bug (http://llvm.org/bugs/show_bug.cgi?id=7247) which causes confusion between the container std::set and the function Packet::set, and this is currently addressed by not including the entire namespace std, but rather selecting e.g. "using std::vector" in the appropriate places.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17MEM: Add port proxies instead of non-structural portsAndreas Hansson
Port proxies are used to replace non-structural ports, and thus enable all ports in the system to correspond to a structural entity. This has the advantage of accessing memory through the normal memory subsystem and thus allowing any constellation of distributed memories, address maps, etc. Most accesses are done through the "system port" that is used for loading binaries, debugging etc. For the entities that belong to the CPU, e.g. threads and thread contexts, they wrap the CPU data port in a port proxy. The following replacements are made: FunctionalPort > PortProxy TranslatingPort > SETranslatingPortProxy VirtualPort > FSTranslatingPortProxy --HG-- rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-07Merge with the main repository again.Gabe Black
2012-01-07Merge with main repository.Gabe Black
2011-12-01SE: Don't warn when not extending stack as it's too noisy with O3.Ali Saidi
--HG-- extra : rebase_source : e56d1551d42d46b5f357cd63f9891715b664f6fc
2011-11-18SE/FS: Get rid of includes of config/full_system.hh.Gabe Black
2011-11-02SE/FS: Get rid of FULL_SYSTEM in sim.Gabe Black
2011-10-30SE/FS: Build the base process class in FS.Gabe Black
2011-10-22SE: move page allocation from PageTable to ProcessSteve Reinhardt
PageTable supported an allocate() call that called back through the Process to allocate memory, but did not have a method to map addresses without allocating new pages. It makes more sense for Process to do the allocation, so this method was renamed allocateMem() and moved to Process, and uses a new map() call on PageTable. The remaining uses of the process pointer in PageTable were only to get the name and the PID, so by passing these in directly in the constructor, we can make PageTable completely independent of Process.
2011-09-09Stack: Tidy up some comments, a warning, and make stack extension consistent.Gabe Black
Do some minor cleanup of some recently added comments, a warning, and change other instances of stack extension to be like what's now being done for x86.
2011-09-02TLB: comments and a helpful warning.Lisa Hsu
Nothing big here, but when you have an address that is not in the page table request to be allocated, if it falls outside of the maximum stack range all you get is a page fault and you don't know why. Add a little warn() to explain it a bit. Also add some comments and alter logic a little so that you don't totally ignore the return value of checkAndAllocNextPage().
2011-05-23syscall emul: fix Power Linux mmap constant, plus other cleanupSteve Reinhardt
We were getting a spurious warning in the regressions that turned out to be due to having the wrong value for TGT_MAP_ANONYMOUS for Power Linux, but in the process of tracking it down I ended up doing some cleanup of the mmap handling in general.
2011-04-19stats: rename stats so they can be used as python expressionsNathan Binkert
2011-04-15includes: sort all includesNathan Binkert
2010-08-17sim: revamp unserialization procedureSteve Reinhardt
Replace direct call to unserialize() on each SimObject with a pair of calls for better control over initialization in both ckpt and non-ckpt cases. If restoring from a checkpoint, loadState(ckpt) is called on each SimObject. The default implementation simply calls unserialize() if there is a corresponding checkpoint section, so we get backward compatibility for existing objects. However, objects can override loadState() to get other behaviors, e.g., doing other programmed initializations after unserialize(), or complaining if no checkpoint section is found. (Note that the default warning for a missing checkpoint section is now gone.) If not restoring from a checkpoint, we call the new initState() method on each SimObject instead. This provides a hook for state initializations that are only required when *not* restoring from a checkpoint. Given this new framework, do some cleanup of LiveProcess subclasses and X86System, which were (in some cases) emulating initState() behavior in startup via a local flag or (in other cases) erroneously doing initializations in startup() that clobbered state loaded earlier by unserialize().
2010-07-05process: get rid of some unused code & varsSteve Reinhardt
2010-07-05process: minor format/style cleanupSteve Reinhardt
2010-06-03More minor gdb-related cleanup.Steve Reinhardt
Found several more stale includes and forward decls.
2010-06-02ARM: Allow ARM processes to start in Thumb mode.Gabe Black
2010-06-02ARM: Detect thumb mode elf images.Gabe Black
2010-01-19util: do checkpoint aggregation more cleanly, fix last changeset.Lisa Hsu
1) Move alpha-specific code out of page_table.cc:serialize(). 2) Begin serializing M5_pid and unserializing it, but adding an function to do optional paramIn so that old checkpoints don't need to be fixed up. 3) Fix up alpha startup code so that the unserialized M5_pid value is properly written to DTB_IPR_ASN. 4) Fix the memory unserialize that I forgot somehow in the last changeset. 5) Add in an agg_se.py to handle aggregated checkpoints. --bench foo-bar plus positional arguments foo bar are the only changes in usage from se.py. Note this aggregation stuff has only been tested for Alpha and nothing else, though it should take a very minimal amount of work to get it to work with another ISA.
2009-11-04build: fix compile problems pointed out by gcc 4.4Nathan Binkert
2009-10-30Syscalls: Make system calls access arguments like a stack, not an array.Gabe Black
When accessing arguments for a syscall, the position of an argument depends on the policies of the ISA, how much space preceding arguments took up, and the "alignment" of the index for this particular argument into the number of possible storate locations. This change adjusts getSyscallArg to take its index parameter by reference instead of value and to adjust it to point to the possible location of the next argument on the stack, basically just after the current one. This way, the rules for the new argument can be applied locally without knowing about other arguments since those have already been taken into account implicitly. All system calls have also been changed to reflect the new interface. In a number of cases this made the implementation clearer since it encourages arguments to be collected in one place in order and then used as necessary later, as opposed to scattering them throughout the function or using them in place in long expressions. It also discourages using getSyscallArg over and over to retrieve the same value when a temporary would do the job.
2009-10-27POWER: Add support for the Power ISATimothy M. Jones
This adds support for the 32-bit, big endian Power ISA. This supports both integer and floating point instructions based on the Power ISA Book I v2.06.
2009-09-23arch: nuke arch/isa_specific.hh and move stuff to generated config/the_isa.hhNathan Binkert
2009-07-27ARM: Detect OABI binaries and complain that they're no-longer supported.Ali Saidi
2009-06-04types: clean up types, especially signed vs unsignedNathan Binkert
2009-04-15Get rid of the Unallocated thread context state.Steve Reinhardt
Basically merge it in with Halted. Also had to get rid of a few other functions that called ThreadContext::deallocate(), including: - InOrderCPU's setThreadRescheduleCondition. - ThreadContext::exit(). This function was there to avoid terminating simulation when one thread out of a multi-thread workload exits, but we need to find a better (non-cpu-centric) way.
2009-02-27Processes: Make getting and setting system call arguments part of a process ↵Gabe Black
object.
2009-02-27X86: Add a class to support 32 bit x86 linux process.Gabe Black
2009-02-15X86: Make the loader recognize 32 bit x86 processes.Gabe Black
2009-01-30Errors: Use the correct panic/warn/fatal/info message in some places.Ali Saidi
2008-12-07imported patch aux-fix.patchLisa Hsu
2008-12-05This brings M5 closer to modernity - the kernel being advertised is newer so ↵Lisa Hsu
it won't die on binaries compiled with newer glibc's, and enables use of TLS-toolchain built binaries for ALPHA_SE by putting auxiliary vectors on the stack. There are some comments in the code to help. Finally, stats changes for ALPHA are from slight perturbations to the initial stack frame, all minimal diffs.
2008-12-04This patch pulls out the auxiliary vector struct from individual ISALisa Hsu
LiveProcesses to the base LiveProcess definition so anyone can use them.
2008-11-20Assume files w/o obvious OS are Linux (with warning)Steve Reinhardt
instead of giving a fatal error.
2008-11-02Make it so that all thread contexts are registered with the System, even inLisa Hsu
SE. Process still keeps track of the tc's it owns, but registration occurs with the System, this eases the way for system-wide context Ids based on registration.
2008-07-23process: separate stderr from stdoutMichael Adler
- Add the option of redirecting stderr to a file. With the old behaviour, stderr would follow stdout if stdout was to a file, but stderr went to the host stderr if stdout went to the host stdout. The new default maintains stdout and stderr going to the host. Now the two can specify different files, but they will share a file descriptor if the name of the files is the same. - Add --output and --errout options to se.py to go with --input.
2008-07-23RemoteGDB: add an m5 command line option for setting or disabling remote gdb.Michael Adler
2008-02-05Add base ARM code to M5Stephen Hines
--HG-- extra : convert_revision : d811bf87d1a0bfc712942ecd3db1b48fc75257af
2007-11-29Serialization: Fix serialization of file descriptors. Make sure openRick Strong
file descriptors are reopened and the file pointer is in the same place as when the checkpoint occured. Signed-off by: Ali Saidi --HG-- extra : convert_revision : d9d2cd388c9c02f60e1269d6845891c35f94fc47