| Age | Commit message (Collapse) | Author |
|---|
|
This patch changes the name the command-line options related to debug
output to all start with "debug" rather than being a mix of that and
"trace". It also makes it clear that the breakpoint time is specified
in ticks and not in cycles.
|
|
Thumb2 ARM kernels may access the TEEHBR via thumbee_notifier
in arch/arm/kernel/thumbee.c. The Linux kernel code just seems
to be saving and restoring the register. This patch adds support
for the TEEHBR cp14 register. Note, this may be a special case
when restoring from an image that was run on a system that
supports ThumbEE.
|
|
Newer linux kernels and distros exercise more functionality in the IDE device
than previously, exposing 2 races. The first race is the handling of aborted
DMA commands would immediately report the device is ready back to the kernel
and cause already in flight commands to assert the simulator when they returned
and discovered an inconsitent device state. The second race was due to the
Status register not being handled correctly, the interrupt status bit would get
stuck at 1 and the driver eventually views this as a bad state and logs the
condition to the terminal. This patch fixes these two conditions by making the
device handle aborted commands gracefully and properly handles clearing the
interrupt status bit in the Status register.
|
|
SimLoopExitEvents weren't serialized by default. Some benchmarks
utilize a delayed m5 exit pseudo op call to terminate the simulation
and this event was lost when resuming from a checkpoint generated
after the pseudo op call. This patch adds the capability to serialize
the SimLoopExitEvents and enable serialization for m5_exit and m5_fail
pseudo ops by default. Does not affect other generic
SimLoopExitEvents.
|
|
The order between updating and using arg_num in
PseudoInst::pseudoInst() is currently undefined. This changeset
explicitly updates arg_num after it has been used to extract an
argument.
--HG--
extra : rebase_source : 67c46dc3333d16ce56687ee8aea41ce6c6d133bb
|
|
This patch ensures the NULL ISA can build without causing issues with
an unused variable.
|
|
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
|
|
This patch is a first step to getting NOISA working again. A number of
redundant includes make life more difficult than it has to be and this
patch simply removes them. There are also some redundant forward
declarations removed.
|
|
This patch moves the system virtual port proxy to the Alpha system
only to make the resurrection of the NOISA slightly less
painful. Alpha is the only ISA that is actually using it.
|
|
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.
A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.
The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.
The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
|
|
This patch adds checkpointing support to x86 tlb. It upgrades the
cpt_upgrader.py script so that previously created checkpoints can
be updated. It moves the checkpoint version to 6.
|
|
This patch removes the notion of a peer block size and instead sets
the cache line size on the system level.
Previously the size was set per cache, and communicated through the
interconnect. There were plenty checks to ensure that everyone had the
same size specified, and these checks are now removed. Another benefit
that is not yet harnessed is that the cache line size is now known at
construction time, rather than after the port binding. Hence, the
block size can be locally stored and does not have to be queried every
time it is used.
A follow-on patch updates the configuration scripts accordingly.
|
|
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.
The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).
The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.
All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.
The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
|
|
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.
As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.
The configs and tests are updated accordingly.
|
|
HG changset 34e3295b0e39 introduced a check in the main simulation
loop that discards exit events that happen at the same tick as another
exit event. This was supposed to fix a problem where a simulation
script got confused by multiple exit events. This obviously breaks the
simulator since it can hide important simulation events, such as a
simulation failure, that happen at the same time as a non-fatal
simulation event.
|
|
in the TLB
Some architectures (currently only x86) require some fixing-up of
physical addresses after a normal address translation. This is usually
to remap devices such as the APIC, but could be used for other memory
mapped devices as well. When running the CPU in a using hardware
virtualization, we still need to do these address fix-ups before
inserting the request into the memory system. This patch moves this
patch allows that code to be used by such CPUs without doing full
address translations.
|
|
|
|
|
|
All architectures execute m5 pseudo instructions by setting up
arguments according to the ABI and executing a magic instruction that
contains an operation number. Handling of such instructions is
currently spread across the different ISA implementations. This
changeset introduces the PseudoInst::pseudoInst function which handles
most of this in an architecture independent way. This is function is
mainly intended to be used from KVM, but can also be used from the
simulated CPUs.
|
|
Previously, nextCycle() could return the *current* cycle if the current tick was
already aligned with the clock edge. This behavior is not only confusing (not
quite what the function name implies), but also caused problems in the
drainResume() function. When exiting/re-entering the sim loop (e.g., to take
checkpoints), the CPUs will drain and resume. Due to the previous behavior of
nextCycle(), the CPU tick events were being rescheduled in the same ticks that
were already processed before draining. This caused divergence from runs that
did not exit/re-entered the sim loop. (Initially a cycle difference, but a
significant impact later on.)
This patch separates out the two behaviors (nextCycle() and clockEdge()),
uses nextCycle() in drainResume, and uses clockEdge() everywhere else.
Nothing (other than name) should change except for the drainResume timing.
|
|
This changeset adds support for forwarding arguments to the PC
event constructors to following methods:
addKernelFuncEvent
addFuncEvent
Additionally, this changeset adds the following helper method to the
System base class:
addFuncEventOrPanic - Hook a PCEvent to a symbol, panic on failure.
addKernelFuncEventOrPanic - Hook a PCEvent to a kernel symbol, panic
on failure.
System implementations have been updated to use the new functionality
where appropriate.
|
|
Without loading weak symbols into gem5, some function names and the given PC
cannot correspond correctly, because the binding attributes of unction names
in an ELF file are not only STB_GLOBAL or STB_LOCAL, but also STB_WEAK. This
patch adds a function for loading weak symbols.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
|
|
This patch enables warnings for missing declarations. To avoid issues
with SWIG-generated code, the warning is only applied to non-SWIG
code.
|
|
This patch address the most important name shadowing warnings (as
produced when using gcc/clang with -Wshadow). There are many
locations where constructor parameters and function parameters shadow
local variables, but these are left unchanged.
|
|
This patch makes the clock member private to the ClockedObject and
forces all children to access it using clockPeriod(). This makes it
impossible to inadvertently change the clock, and also makes it easier
to transition to a situation where the clock is derived from e.g. a
clock domain, or through a multiplier.
|
|
Virtualized CPUs and the fastmem mode of the atomic CPU require direct
access to physical memory. We currently require caches to be disabled
when using them to prevent chaos. This is not ideal when switching
between hardware virutalized CPUs and other CPU models as it would
require a configuration change on each switch. This changeset
introduces a new version of the atomic memory mode,
'atomic_noncaching', where memory accesses are inserted into the
memory system as atomic accesses, but bypass caches.
To make memory mode tests cleaner, the following methods are added to
the System class:
* isAtomicMode() -- True if the memory mode is 'atomic' or 'direct'.
* isTimingMode() -- True if the memory mode is 'timing'.
* bypassCaches() -- True if caches should be bypassed.
The old getMemoryMode() and setMemoryMode() methods should never be
used from the C++ world anymore.
|
|
|
|
Used as a command in full-system scripts helps the user ensure the benchmarks have finished successfully.
For example, one can use:
/path/to/benchmark args || /sbin/m5 fail 1
and thus ensure gem5 will exit with an error if the benchmark fails.
|
|
When "-I" (maximum instruction number) and "-F" (fastforward instruction
number) are applied together, gem5 immediately exits after the cpu switching.
The reason is that multiple exit events may be generated in the same cycle by
Atomic CPU and inserted to mainEventQueue. However, mainEventQueue can only
serve one exit event in one cycle. Therefore, the rest exit events are left in
mainEventQueue without being descheduled or deleted, which causes gem5 exits
immediately after the system resumes by cpu switching.
|
|
This patch adds the "access" syscall for ARM SE as required by some spec2006
benchmarks.
|
|
Tick was not correctly wrapped for the stats system, and therefore it was not
possible to configure the stats dumping from the python scripts without
defining Ticks as long long. This patch fixes the wrapping of Tick by copying
the typemap of uint64_t to Tick.
|
|
|
|
In order to see all registers independent of the current CPU mode, the
ARM architecture model uses the magic MISCREG_CPSR_MODE register to
change the register mappings without actually updating the CPU
mode. This hack is no longer needed since the thread context now
provides a flat interface to the register file. This patch replaces
the CPSR_MODE hack with the flat register interface.
|
|
After making the ISA an independent SimObject, it is serialized
automatically by the Python world. Previously, this just resulted in
an empty ISA section. This patch moves the contents of the ISA to that
section and removes the explicit ISA serialization from the thread
contexts, which makes it behave like a normal SimObject during
serialization.
Note: This patch breaks checkpoint backwards compatibility! Use the
cpt_upgrader.py utility to upgrade old checkpoints to the new format.
|
|
This patch adds support for the memInvalidate() drain method. TLB
flushing is requested by calling the virtual flushAll() method on the
TLB.
Note: This patch renames invalidateAll() to flushAll() on x86 and
SPARC to make the interface consistent across all supported
architectures.
|
|
This patch adds a check to the clocked object constructor to ensure it
is not configured to have a clock period of 0.
|
|
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.
The change is needed to allow interleaved memory controllers in the
system.
|
|
This patch adds support for outputting protobuf messages through a
ProtoOutputStream which hides the internal streams used by the
library. The stream is created based on the name of an output file and
optionally includes compression using gzip.
The output stream will start by putting a magic number in the file,
and then for every message that is serialized prepend the size such
that the stream can be written and read incrementally. At this point
this merely serves as a proof of concept.
|
|
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
|
|
This patch adds a _curTick variable to an eventq. This variable is updated
whenever an event is serviced in function serviceOne(), or all events upto
a particular time are processed in function serviceEvents(). This change
helps when there are eventqs that do not make use of curTick for scheduling
events.
|
|
This patch adds the following two methods to the Drainable base class:
memWriteback() - Write back all dirty cache lines to memory using
functional accesses.
memInvalidate() - Invalidate memory system buffers. Dirty data
won't be written back.
Specifying calling memWriteback() after draining will allow us to
checkpoint systems with caches. memInvalidate() can be used to drop
memory system buffers in preparation for switching to an accelerated
CPU model that bypasses the gem5 memory system (e.g., hardware
virtualized CPUs).
Note: This patch only adds the methods to Drainable, the code for
flushing the TLB and the cache is committed separately.
|
|
This patch moves the draining interface from SimObject to a separate
class that can be used by any object needing draining. However,
objects not visible to the Python code (i.e., objects not deriving
from SimObject) still depend on their parents informing them when to
drain. This patch also gets rid of the CountedDrainEvent (which isn't
really an event) and replaces it with a DrainManager.
|
|
When casting objects in the generated SWIG interfaces, SWIG uses
classical C-style casts ( (Foo *)bar; ). In some cases, this can
degenerate into the equivalent of a reinterpret_cast (mainly if only a
forward declaration of the type is available). This usually works for
most compilers, but it is known to break if multiple inheritance is
used anywhere in the object hierarchy.
This patch introduces the cxx_header attribute to Python SimObject
definitions, which should be used to specify a header to include in
the SWIG interface. The header should include the declaration of the
wrapped object. We currently don't enforce header the use of the
header attribute, but a warning will be generated for objects that do
not use it.
|
|
This patch enables dumping statistics and Linux process information on
context switch boundaries (__switch_to() calls) that are used for
Streamline integration (a graphical statistics viewer from ARM).
|
|
|
|
This patch changes the default system clock from 1THz to 1GHz. This
clock is used by all modules that do not override the default (parent
clock), and primarily affects the IO subsystem. Every DMA device uses
its clock to schedule the next transfer, and the change will thus
cause this inter-transfer delay to be longer.
The default clock of the bus is removed, as the clock inherited from
the system provides exactly the same value.
A follow-on patch will bump the stats.
|
|
Ruby system was recently converted to a clocked object. Such objects maintain
state related to the time that has passed so far. During the cache warmup, Ruby
system changes its own time and the global time. Later on, the global time is
restored. So Ruby system also needs to reset its own time.
|
|
This patch adds an additional level of ports in the inheritance
hierarchy, separating out the protocol-specific and protocl-agnostic
parts. All the functionality related to the binding of ports is now
confined to use BaseMaster/BaseSlavePorts, and all the
protocol-specific parts stay in the Master/SlavePort. In the future it
will be possible to add other protocol-specific implementations.
The functions used in the binding of ports, i.e. getMaster/SlavePort
now use the base classes, and the index parameter is updated to use
the PortID typedef with the symbolic InvalidPortID as the default.
|
|
This patch moves all the memory backing store operations from the
independent memory controllers to the global physical memory. The main
reason for this patch is to allow address striping in a future set of
patches, but at this point it already provides some useful
functionality in that it is now possible to change the number of
memory controllers and their address mapping in combination with
checkpointing. Thus, the host and guest view of the memory backing
store are now completely separate.
With this patch, the individual memory controllers are far simpler as
all responsibility for serializing/unserializing is moved to the
physical memory. Currently, the functionality is more or less moved
from AbstractMemory to PhysicalMemory without any major
changes. However, in a future patch the physical memory will also
resolve any ranges that are interleaved and properly assign the
backing store to the memory controllers, and keep the host memory as a
single contigous chunk per address range.
Functionality for future extensions which involve CPU virtualization
also enable the host to get pointers to the backing store.
|
