| Age | Commit message (Collapse) | Author |
|---|
|
Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.
The following replacements are made:
FunctionalPort > PortProxy
TranslatingPort > SETranslatingPortProxy
VirtualPort > FSTranslatingPortProxy
--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
|
|
The system port is used as a globally reachable access point to the
memory subsystem. The benefit of using an actual port is that the
usual infrastructure is used to resolve any access and thus makes the
overall system able to handle distributed memories in any
configuration, and also makes the accesses agnostic to the address
map. This patch only introduces the port and does not actually use it
for anything.
|
|
This patch adds a mechanism to collect run time samples for specific portions
of a benchmark, using work_begin and work_end pseudo instructions.It also enhances
the histogram stat to report geometric mean.
|
|
This patch adds a function for replacing the event at the head of the queue
with another event. This helps in running a different set of events. Events
already scheduled can processed by replacing the original head event back.
This function has been specifically added to support cache warmup and
cooldown required for creating and restoring checkpoints.
--HG--
extra : rebase_source : ed6e2905720b6bfdefd020fab76235ccf33d28d1
|
|
--HG--
extra : rebase_source : e56d1551d42d46b5f357cd63f9891715b664f6fc
|
|
PageTable supported an allocate() call that called back
through the Process to allocate memory, but did not have
a method to map addresses without allocating new pages.
It makes more sense for Process to do the allocation, so
this method was renamed allocateMem() and moved to Process,
and uses a new map() call on PageTable.
The remaining uses of the process pointer in PageTable
were only to get the name and the PID, so by passing these
in directly in the constructor, we can make PageTable
completely independent of Process.
|
|
|
|
Replace the (broken as of previous changeset) swig_objdecl() method
that allowed/forced you to substitute a whole new C++ struct
definition for SWIG to wrap with a set of export_method* hooks
that let you just declare a set of C++ methods (or other declarations)
that get inserted in the auto-generated struct.
Restore the System get/setMemoryMode methods, and use this mechanism
to specialize SimObject as well, eliminating teh need for sim_object.i.
Needed bits of sim_object.i are moved to the new pyobject.i.
Also sucked a little SimObject specialization into cxx_param_decl()
allowing us to get rid of src/sim/sim_object_params.hh. Now the
generation and wrapping of the base SimObject param struct is more
in line with how derived objects are handled.
--HG--
rename : src/python/swig/sim_object.i => src/python/swig/pyobject.i
|
|
- Move the random bits of SWIG code generation out of src/SConscript
file and into methods on the objects being wrapped.
- Cleaned up some variable naming and added some comments to make
the process a little clearer.
- Did a little generated file/module renaming:
- vptype_Foo now Foo_vector
- init_Foo is now Foo_init
This makes it easier to see all the Foo-related files in a
sorted directory listing.
- Made cxx_predecls and swig_predecls normal SimObject classmethods.
- Got rid of swig_objdecls hook, even though this breaks the System
objects get/setMemoryMode method exports. Will be fixing this in
a future changeset.
|
|
All of the classes will now be available in both modes, and only
GenericPageTableFault will continue to check the mode for conditional
compilation. It uses a process object to handle the fault in SE mode, and
for now those aren't available in FS mode.
|
|
This constant will have the same value as FULL_SYSTEM but will not be usable
by the preprocessor. It can be substituted into places where FULL_SYSTEM is
used in a C++ context and will make it easier to find which parts of the
simulator still use FULL_SYSTEM with the preprocessor using grep.
|
|
Initialize flags via the Event constructor instead of calling
setFlags() in the body of the derived class's constructor. I
forget exactly why, but this made life easier when implementing
multi-queue support.
Also rename Event::getFlags() to isFlagSet() to better match
common usage, and get rid of some unused Event methods.
|
|
Use exitSimLoop() function instead of explicitly scheduling
on mainEventQueue (which won't work once we go to multiple
event queues). Also introduced a local params variable to
shorten a lot of expressions.
|
|
These functions aren't called anywhere and are probably only theoretically
useful.
|
|
It was technically possible but clumsy to determine what endianness a guest
was configured with using the state in byteswap.hh. This change makes that
information available more directly.
Also get rid of unused (and mildly redundant) ByteOrderDiffers constant.
|
|
|
|
|
|
Only create a memory ordering violation when the value could have changed
between two subsequent loads, instead of just when loads go out-of-order
to the same address. While not very common in the case of Alpha, with
an architecture with a hardware table walker this can happen reasonably
frequently beacuse a translation will miss and start a table walk and
before the CPU re-schedules the faulting instruction another one will
pass it to the same address (or cache block depending on the dendency
checking).
This patch has been tested with a couple of self-checking hand crafted
programs to stress ordering between two cores.
The performance improvement on SPEC benchmarks can be substantial (2-10%).
|
|
|
|
Do some minor cleanup of some recently added comments, a warning, and change
other instances of stack extension to be like what's now being done for x86.
|
|
Nothing big here, but when you have an address that is not in the page table request to be allocated, if it falls outside of the maximum stack range all you get is a page fault and you don't know why. Add a little warn() to explain it a bit. Also add some comments and alter logic a little so that you don't totally ignore the return value of checkAndAllocNextPage().
|
|
|
|
|
|
|
|
|
|
We were getting a spurious warning in the regressions that turned
out to be due to having the wrong value for TGT_MAP_ANONYMOUS for
Power Linux, but in the process of tracking it down I ended up
doing some cleanup of the mmap handling in general.
|
|
Also got rid of unused C++ unserializeAll() method
(this is now handled in Python)
|
|
|
|
|
|
|
|
this allows things to be overridden at startup (e.g. for tests)
|
|
This is similar to guards on mercurial queues and they're used for selecting
which files are compiled into some given object. We already do something
similar, but it's mostly hard coded for the m5 binary and the m5 library
and I'd like to make it more flexible to better support the unittests
|
|
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help
|
|
|
|
|
|
|
|
Updated some of the assembly code sequences to use armv7 instructions and
coprocessor 15 for storing the TLS pointer.
|
|
This patch prevents not executed conditional instructions marked as
IsQuiesce from stalling the pipeline indefinitely. If the instruction
is not executed the quiesceSkip psuedoinst is called which schedules a
wakes up call to the fetch stage.
|
|
|
|
Some ISAs (like ARM) relies on hardware page table walkers. For those ISAs,
when a TLB miss occurs, initiateTranslation() can return with NoFault but with
the translation unfinished.
Instructions experiencing a delayed translation due to a hardware page table
walk are deferred until the translation completes and kept into the IQ. In
order to keep track of them, the IQ has been augmented with a queue of the
outstanding delayed memory instructions. When their translation completes,
instructions are re-executed (only their initiateAccess() was already
executed; their DTB translation is now skipped). The IEW stage has been
modified to support such a 2-pass execution.
|
|
Setup initial timesync event in initState or loadState so that curTick has
been updated to the new value, otherwise the event is scheduled in the past.
|
|
|
|
Updated patches from Rick Strong's set that modify performance counters for
McPAT
|
|
|
|
--HG--
rename : src/sim/fault.hh => src/sim/fault_fwd.hh
|
|
Moving the definition of NoFault into fault.hh doesn't bring any new
dependencies with it, and allows some files to include just fault.hh which has
less baggage. NoFault will still be available to everything that includes
faults.hh because it includes fault.hh.
|
|
Regex replacement of curTick with curTick() accidentally
changed checkpoint key string for serialization but not
for unserialization.
|
|
|
|
M5 skips over any simulated time where it doesn't have any work to do. When
the simulation is active, the time skipped is short and the work done at any
point in time is relatively substantial. If the time between events is long
and/or the work to do at each event is small, it's possible for simulated time
to pass faster than real time. When running a benchmark that can be good
because it means the simulation will finish sooner in real time. When
interacting with the real world through, for instance, a serial terminal or
bridge to a real network, this can be a problem. Human or network response time
could be greatly exagerated from the perspective of the simulation and make
simulated events happen "too soon" from an external perspective.
This change adds the capability to force the simulation to run no faster than
real time. It does so by scheduling a periodic event that checks to see if
its simulated period is shorter than its real period. If it is, it stalls the
simulation until they're equal. This is called time syncing.
A future change could add pseudo instructions which turn time syncing on and
off from within the simulation. That would allow time syncing to be used for
the interactive parts of a session but then turned off when running a
benchmark using the m5 utility program inside a script. Time syncing would
probably not happen anyway while running a benchmark because there would be
plenty of work for M5 to do, but the event overhead could be avoided.
|
|
Use posix clock functions (and librt) if it is available.
Inline a bunch of functions and implement more operators.
* * *
time: more cleanup
|
