summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-04-10ARM: Fix checkpoint restoration in ARM_SE.Ali Saidi
2011-04-10ARM: Get rid of some comments/todos that no longer apply.Ali Saidi
2011-04-06ruby: fixes to support more types of RubyRequestsBrad Beckmann
2011-04-04ARM: Include IDE/CF controller by default in PBX model.Ali Saidi
Frame buffer and boot linux: ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit Linux from a CF card: ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit Run Android ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android Run MP ./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04ARM: Use CPU local lock before sending load to mem system.Ali Saidi
This change uses the locked_mem.hh header to handle implementing CLREX. It simplifies the current implementation greatly.
2011-04-04ARM: Fix checkpoint restoration into O3 CPU and the way O3 switchCpu works.Ali Saidi
This change fixes a small bug in the arm copyRegs() code where some registers wouldn't be copied if the processor was in a mode other than MODE_USER. Additionally, this change simplifies the way the O3 switchCpu code works by utilizing TheISA::copyRegs() to copy the required context information rather than the adhoc copying that goes on in the CPU model. The current code makes assumptions about the visibility of int and float registers that aren't true for all architectures in FS mode.
2011-04-04ARM: Fix bug in MicroLdrNeon templates for initiateAcc().Ali Saidi
2011-04-04ARM: Cleanup and small fixes to some NEON ops to match the spec.William Wang
Only certain bits of the cpacr can be written, some must be equal. Mult instructions that write the same register should do something sane
2011-04-04ARM: Cleanup implementation of ITSTATE and put important code in PCState.Ali Saidi
Consolidate all code to handle ITSTATE in the PCState object rather than touching a variety of structures/objects.
2011-04-04ARM: Fix m5op parameters bug.Ali Saidi
All the m5op parameters are 64 bits, but we were only sending 32 bits; and the static register indexes were incorrectly specified.
2011-04-04ARM: Tag appropriate instructions as IsReturnAli Saidi
2011-04-04ARM: Fix table walk going on while ASID changes errorAli Saidi
2011-04-04CPU: Remove references to memory copy operationsAli Saidi
2011-04-04O3: Tighten memory order violation checking to 16 bytes.Ali Saidi
The comment in the code suggests that the checking granularity should be 16 bytes, however in reality the shift by 8 is 256 bytes which seems much larger than required.
2011-04-04IDE: Support x86, Alpha, and ARM use of the IDE controller.Ali Saidi
2011-04-04ARM: Fix checkpointing case where PL111 is powered off.Ali Saidi
2011-04-04ARM: Remove debugging warn that was accidently left in.Ali Saidi
2011-04-04ARM: Fix multiplication error in udelayAli Saidi
2011-04-01hammer: fixed dma uniproc errorBrad Beckmann
Fixed an error reguarding DMA for uninprocessor systems. Basically removed an overly agressive optimization that lead to inconsistent state between the cache and the directory.
2011-03-31CacheMemory: add allocateVoid() that is == allocate() but no return value.Lisa Hsu
This function duplicates the functionality of allocate() exactly, except that it does not return a return value. In protocols where you just want to allocate a block but do not want that block to be your implicitly passed cache_entry, use this function. Otherwise, SLICC will complain if you do not consume the pointer returned by allocate(), and if you do a dummy assignment Entry foo := cache.allocate(address), the C++ compiler will complain of an unused variable. This is kind of a hack to get around those issues, but suggestions welcome.
2011-03-31Ruby: Simplify SLICC and Entry/TBE handling.Lisa Hsu
Before this changeset, all local variables of type Entry and TBE were considered to be pointers, but an immediate use of said variables would not be automatically deferenced in SLICC-generated code. Instead, deferences occurred when such variables were passed to functions, and were automatically dereferenced in the bodies of the functions (e.g. the implicitly passed cache_entry). This is a more general way to do it, which leaves in place the assumption that parameters to functions and local variables of type AbstractCacheEntry and TBE are always pointers, but instead of dereferencing to access member variables on a contextual basis, the dereferencing automatically occurs on a type basis at the moment a member is being accessed. So, now, things you can do that you couldn't before include: Entry foo := getCacheEntry(address); cache_entry.DataBlk := foo.DataBlk; or cache_entry.DataBlk := getCacheEntry(address).DataBlk; or even cache_entry.DataBlk := static_cast(Entry, pointer, cache.lookup(address)).DataBlk;
2011-03-31Ruby: Add new object called WireBuffer to mimic a Wire.Lisa Hsu
This is a substitute for MessageBuffers between controllers where you don't want messages to actually go through the Network, because requests/responses can always get reordered wrt to one another (even if you turn off Randomization and turn on Ordered) because you are, after all, going through a network with contention. For systems where you model multiple controllers that are very tightly coupled and do not actually go through a network, it is a pain to have to write a coherence protocol to account for mixed up request/response orderings despite the fact that it's completely unrealistic. This is *not* meant as a substitute for real MessageBuffers when messages do in fact go over a network.
2011-03-31Ruby: have the rubytester pass contextId to Ruby.Lisa Hsu
2011-03-31Ruby: enable multiple sequencers in one controller.Lisa Hsu
2011-03-31Ruby: pass Packet->Req->contextId() to Ruby.Lisa Hsu
It is useful for Ruby to understand from whence request packets came. This has all request packets going into Ruby pass the contextId value, if it exists. This supplants the old libruby proc_id value passed around in all the Messages, so I've also removed the unused unsigned proc_id; member generated by SLICC for all Message types.
2011-03-31Ruby: Bug in SLICC forgot semicolon at end of code.Lisa Hsu
2011-03-29sim: typecast Tick to UTick for eventQ assertKorey Sewell
2011-03-29Power: Fix compilation.Gabe Black
2011-03-28This patch supports cache flushing in MOESI_hammerSomayeh Sardashti
2011-03-26mips: cleanup ISA-specific codeKorey Sewell
*** (1): get rid of expandForMT function MIPS is the only ISA that cares about having a piece of ISA state integrate multiple threads so add constants for MIPS and relieve the other ISAs from having to define this. Also, InOrder was the only core that was actively calling this function * * * (2): get rid of corespecific type The CoreSpecific type was used as a proxy to pass in HW specific params to a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense to not force every other ISA to use CoreSpecific as well use a special reset function to set it. That probably should go in a PowerOn reset fault anyway.
2011-03-25Arm: Add in a missing miscRegName.Gabe Black
2011-03-24Arm: Get rid of unused and incomplete setCp15Register and readCp15Register.Gabe Black
2011-03-24Arm: Get rid of the unused copyStringArray32 method from Arm process classes.Gabe Black
2011-03-24ISA parser: Set up op_src_decl and op_dest_decl for pc operands.Gabe Black
2011-03-22This patch fixes a build error in networktest.cc that occurs with gcc4.2Tushar Krishna
2011-03-22Ruby: Remove CacheMsg class from SLICCNilay Vaish
The goal of the patch is to do away with the CacheMsg class currently in use in coherence protocols. In place of CacheMsg, the RubyRequest class will used. This class is already present in slicc_interface/RubyRequest.hh. In fact, objects of class CacheMsg are generated by copying values from a RubyRequest object.
2011-03-21This patch makes garnet use the info about active and inactive vnets during ↵Tushar Krishna
allocation and power estimations etc
2011-03-21fix garnet fleible pipelineTushar Krishna
2011-03-21This patch adds the network tester for simple and garnet networks.Tushar Krishna
The tester code is in testers/networktest. The tester can be invoked by configs/example/ruby_network_test.py. A dummy coherence protocol called Network_test is also addded for network-only simulations and testing. The protocol takes in messages from the tester and just pushes them into the network in the appropriate vnet, without storing any state.
2011-03-20SLICC: Remove WakeUp* import calls from ast/__init__.pyNilay Vaish
I had recently committed a patch that removed the WakeUp*.py files from the slicc/ast directory. I had forgotten to remove the import calls for these files from slicc/ast/__init__.py. This resulted in error while running regressions on zizzer. This patch does the needful.
2011-03-19Ruby: Convert CacheRequestType to RubyRequestTypeNilay Vaish
This patch converts CacheRequestType to RubyRequestType so that both the protocol dependent and independent code makes use of the same request type.
2011-03-19Ruby: Convert AccessModeType to RubyAccessModeNilay Vaish
This patch converts AccessModeType to RubyAccessMode so that both the protocol dependent and independent code uses the same access mode.
2011-03-19MOESI_hammer: minor fixes to full-bit dirBrad Beckmann
2011-03-19Ruby: dma retry fixBrad Beckmann
This patch fixes the problem where Ruby would fail to call sendRetry on ports after it nacked the port. This patch is particularly helpful for bursty dma requests which often include several packets.
2011-03-19RubyPort: minor fixes to trace flag and dprintfsBrad Beckmann
2011-03-19ruby: added useful dma progress dprintfBrad Beckmann
2011-03-19slicc: improved invalid transition messageBrad Beckmann
2011-03-19MOESI_hammer: fixed dma bug with shared dataBrad Beckmann
2011-03-19MOESI_CMP_directory: significant dma bug fixesBrad Beckmann
2011-03-18SLICC: Remove external_type for structuresNilay Vaish
In SLICC, in order to define a type a data type for which it should not generate any code, the keyword external_type is used. For those data types for which code should be generated, the keyword structure is used. This patch eliminates the use of keyword external_type for defining structures. structure key word can now have an optional attribute external, which would be used for figuring out whether or not to generate the code for this structure. Also, now structures can have functions as well data members in them.