| Age | Commit message (Collapse) | Author |
|---|
|
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
* * *
mem: Adjust cache queue reserve to more conservative values
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
|
|
This patch breaks out the cache write buffer into a separate class,
without affecting any stats. The goal of the patch is to avoid
encumbering the much-simpler write queue with the complex MSHR
handling. In a follow on patch this simplification allows us to
implement write combining.
The WriteQueue gets its own class, but shares a common ancestor, the
generic Queue, with the MSHRQueue.
|
|
Fix the printDataInst function to properly print the immediate value.
|
|
It's apparently not widely known that our scons scripts allow you to
put the build directory wherever you want; not only does it not have
to be immediately under the root of your repo, it doesn't even have
to be underneath the root at all. (For example, sometimes it's useful
to build on a local disk if your repo is on a slow NFS mount.)
I point this out because this functionality has been broken for close
to two years but no one seems to have noticed yet. This patch fixes
an assumption that crept in in changeset be0e1724eb39 (May 09 2014)
that the build dir would be immediately under the top level of the
repo, preventing builds anywhere else.
|
|
clang correctly points out an erroneous use of delete.
|
|
Adding voltage function which returns the current voltage
for a given clocked object. It's handy for power models and
similar stuff that need to retrieve voltage. Function
frequency() is already there, so I see no reason for not having
this one too.
|
|
fu_pool and inst_queue were using -1 for "no such FU" and -2 for "all those
FUs are busy at the moment" when requesting for a FU and replying. This
patch introduces new constants NoCapableFU and NoFreeFU respectively.
In addition, the condition (idx == -2 || idx != -1) is equivalent to
(idx != -1), so this patch also simplifies that.
--HG--
extra : rebase_source : 4833717b9d1e09d7594d1f34f882e13fc4b86846
|
|
Match changes in output stream.
|
|
We can't/shouldn't use KVM after a fork since the child and parent
probably point to the same VM. Knowing the exact effects of this is
hard, but they are likely to be messy. We also disconnect the
performance counters attached to the guest. This works around what
seems to be a kernel bug where spurious SIGIOs get delivered to the
forked child process.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
[andreas.sandberg@arm.com: Fatal if entering KVM in child process ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This changeset adds forking capabilities to the gem5 python scripts. A fork
method is added to simulate.py. This method is responsible for forking the
simulator itself, and will direct all output files to a new output directory
based on the fork sequence number. The default name of the output directory is
the same as the parent with the suffix ".fN" added where N is the fork sequence
number. The fork method provides the option to specify if the system should be
drained prior to forking, or not. By default the system is drained to ensure
that there are no in-flight transactions.
When forking the simulator, the fork method returns the PID of the child
process, or returns 0 if running in the child. This is in line with the standard
Python forking interface.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
[andreas.sandberg@arm.com: Updated to comply with modern draining semantics ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This changeset adds support for notifying the disk images that the simulator has
been forked. We need to disable the saving of the CoW disk image from the child
process, and we need to make sure that systems which use a raw disk image are
not allowed to fork to avoid two or more gem5 processes writing to the same disk
image.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When forking a gem5 process, some objects need to clean up resources
(mainly file descriptions) shared between the child and the parent of
the fork. This changeset adds the notifyFork() method to Drainable,
which is called in the child process.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This changeset adds support for changing the simulator output
directory. This can be useful when the simulation goes through several
stages (e.g., a warming phase, a simulation phase, and a verification
phase) since it allows the output from each stage to be located in a
different directory. Relocation is done by calling core.setOutputDir()
from Python or simout.setOutputDirectory() from C++.
This change affects several parts of the design of the gem5's output
subsystem. First, files returned by an OutputDirectory instance (e.g.,
simout) are of the type OutputStream instead of a std::ostream. This
allows us to do some more book keeping and control re-opening of files
when the output directory is changed. Second, new subdirectories are
OutputDirectory instances, which should be used to create files in
that sub-directory.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
[sascha.bischoff@arm.com: Rebased patches onto a newer gem5 version]
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds assertions that enforce that only invalidating snoops
will ever reach into the logic that tracks in-order load completion and
also invalidation of LL/SC (and MONITOR / MWAIT) monitors. Also adds
some comments to MSHR::replaceUpgrades().
|
|
Writes to locked memory addresses (LLSC) did not wake up the locking
CPU. This can lead to deadlocks on multi-core runs. In AtomicSimpleCPU,
recvAtomicSnoop was checking if the incoming packet was an invalidation
(isInvalidate) and only then handled a locked snoop. But, writes are
seen instead of invalidates when running without caches (fast-forward
configurations). As as simple fix, now handleLockedSnoop is also called
even if the incoming snoop packet are from writes.
|
|
Properly done for the ERET instruction in v8, but not for v7.
Many control register changes are only visible after explicit
instruction synchronization barriers or exception entry/exit.
This means mode changing instructions should squash any
younger in-flight speculative instructions.
|
|
|
|
This patch fixes an issue where an InvalidationReq only traversed one
level of the cache hierarchy, and was subsequently turned into a
ReadExReq due to it needing writable, and the command not being
checked for explicitly.
|
|
Bug fix for check on protobuf file frequency being different than
global frequency.
The ASCII encoder script is also fixed, and the example trace used in
the regressions is updated.
|
|
Add a callback handler for the NoMali reset callback. This callback is
called whenever the GPU is reset using the register interface or the
NoMali API. The callback can be used to override ID registers using
the raw register API.
|
|
Refactor and cleanup the NoMaliGpu class:
* Use a std::map instead of a switch block to map the parameter enum
describing the GPU type to a NoMali type.
* Remove redundant NoMali handle from the interrupt callback.
* Make callbacks and API wrappers protected instead of private to
enable future extensions.
* Wrap remaining NoMali API calls.
|
|
Make clang happy...again.
|
|
|
|
Both Memory Fence is now flagged as Global Memory only to avoid resource
oversubscribing.
Flat instructions now check for Shared Memory resource busy to avoid
oversubscribing resources.
All WaitClass resources now use cycles (not ticks) to register the number
of pipe stages between Scoreboard and Execute to be consistent with
instruction scheduling logic which always used clock cycles.
|
|
brig_object.hh is specific to the HSAIL ISA, and hence should not be
included in ISA-agnostic code.
|
|
|
|
Allow the user to easily build gem5 with the Address Sanitizer, part
of both gcc and clang these days.
|
|
Since the last round of fixes a few new issues have snuck in. We
should consider switching the regression runs to clang.
|
|
Fix up issue highlighted by Valgrind and the clang Address Sanitizer.
|
|
This patch essentially rolls back 10518:30e3715c9405 to make RubyPort the
parent class of DMASequencer. It removes redundant code and restores some
features which were lost when directly inheriting from MemObject. For
example,
DMASequencer can now communicate to other devices using PIO, which is useful
for memmory-mapped communication between multiple DMADevices.
|
|
This patch adds a --debug-end flag to main.py so that debug output can be
stoped at a specified tick, while allowing the simulation to continue. It is
useful in situations where you would like to produce a trace for a region of
interest while still collecting stats for the entire run. This is in contrast
to the currently existing --debug-break flag, which terminates the simulation
at the tick.
|
|
This patch implements the clock_getres() system call for arm and x86 in linux
SE mode.
|
|
Avoid being overly conservative in clearing load locks in the cache,
and allow writes to the line if they are from the same context. This
is in line with ALPHA and ARM.
|
|
This patch introduces the ability of making the coherent crossbar the
point of coherency. If so, the crossbar does not forward packets where
a cache with ownership has already committed to responding, and also
does not forward any coherency-related packets that are not intended
for a downstream memory controller. Thus, invalidations and upgrades
are turned around in the crossbar, and the memory controller only sees
normal reads and writes.
In addition this patch moves the express snoop promotion of a packet
to the crossbar, thus allowing the downstream cache to check the
express snoop flag (as it should) for bypassing any blocking, rather
than relying on whether a cache is responding or not.
|
|
Adopt the same flow as in timing mode, where the caches on the path to
memory get to keep the line (if present), and we use the
responderHadWritable flag to determine if we need to forward the
(invalidating) packet or not.
|
|
This patch unifies the snoop handling in case of hitting writebacks
with how we handle snoops hitting in the tags. As a result, we end up
using the same optimisation as the normal snoops, where we inform the
downstream cache if we encounter a line in Modified (writable and
dirty) state, which enables us to avoid sending out express snoops to
invalidate any Shared copies of the line. A few regressions
consequently change, as some transactions are sunk higher up in the
cache hierarchy.
|
|
This patch changes how the cache determines if snoops should be
forwarded from the memory side to the CPU side. Instead of having a
parameter, the cache now looks at the port connected on the CPU side,
and if it is a snooping port, then snoops are forwarded. Less error
prone, and less parameters to worry about.
The patch also tidies up the CPU classes to ensure that their I-side
port is not snooping by removing overrides to the snoop request
handler, such that snoop requests will panic via the default
MasterPort implement
|
|
Due to insufficient build deps, the checkpoint tags might not get
updated; this commit solves this. Due to the uncommon nature of the
build target, regenerating tags.cc is a fairly clean solution. Since
SCons hashes file contents, it won't recompile anything unless a new
checkpoint upgrader is actually added.
--HG--
extra : amend_source : ed3879da7668554693f697076deaf5029cc9b954
|
|
The previous implementation did a pair of nested RMW operations,
which isn't compatible with the way that locked RMW operations are
implemented in the cache models. It was convenient though in that
it didn't require any new micro-ops, and supported cmpxchg16b using
64-bit memory ops. It also worked in AtomicSimpleCPU where
atomicity was guaranteed by the core and not by the memory system.
It did not work with timing CPU models though.
This new implementation defines new 'split' load and store micro-ops
which allow a single memory operation to use a pair of registers as
the source or destination, then uses a single ldsplit/stsplit RMW
pair to implement cmpxchg. This patch requires support for 128-bit
memory accesses in the ISA (added via a separate patch) to support
cmpxchg16b.
|
|
Although the cache models support wider accesses, the ISA descriptions
assume that (for the most part) memory operands are integer types,
which makes it difficult to define instructions that do memory accesses
larger than 64 bits.
This patch adds some generic support for memory operands that are arrays
of uint64_t, and specifically a 'u2qw' operand type for x86 that is an
array of 2 uint64_ts (128 bits). This support is unused at this point,
but will be needed shortly for cmpxchg16b. Ideally the 128-bit SSE
memory accesses will also be rewritten to use this support.
Support for 128-bit accesses could also have been added using the gcc
__int128_t extension, which would have been less disruptive. However,
although clang also supports __int128_t, it's still non-standard.
Also, more importantly, this approach creates a path to defining
256- and 512-byte operands as well, which will be useful for eventual
AVX support.
|
|
MemOperand variables were being initialized to 0
"to avoid 'uninitialized variable' errors" but these
no longer seem to be a problem (with the exception of
one use case in POWER that is arguably broken and
easily fixed here).
Getting rid of the initialization is necessary to
set up a subsequent patch which extends memory
operands to possibly not be scalars, making the
'= 0' initialization no longer feasible.
|
|
Writing 16 bytes from an 8-byte source value is a bad idea.
This doesn't appear to have broken anything, but showed up
as spurious differences when tracediffing runs.
|
|
Result of running 'hg m5style --skip-all --fix-control -a' to get
rid of '== true' comparisons, plus trivial manual edits to get
rid of '== false'/'== False' comparisons.
Left a couple of explicit comparisons in where they didn't seem
unreasonable:
invalid boolean comparison in src/arch/mips/interrupts.cc:155
>> DPRINTF(Interrupt, "Interrupts OnCpuTimerINterrupt(tc) == true\n");<<
invalid boolean comparison in src/unittest/unittest.hh:110
>> "EXPECT_FALSE(" #expr ")", (expr) == false)<<
|
|
In the process of trying to get rid of an '== false' comparison,
it became apparent that a slightly more involved solution was
needed. Split this out into its own changeset since it's not
a totally trivial local change like the others.
|
|
Result of running 'hg m5style --skip-all --fix-control -a'.
|
|
Result of running 'hg m5style --skip-all --fix-white -a'.
|
|
|
|
|
|
|
|
|
