| Age | Commit message (Collapse) | Author |
|---|
|
The PMU model currently doesn't calculate the PMU event counter index
correctly for writes to the PMEVTYPER[0-5]_EL0 registers. Fix this
obvious mistake.
Change-Id: I2913eedddeb98480660e2d63948f6d727adf5ab8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3121
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
The current implementation of reference counting for PyEvents only
partially works. The native object is currently kept alive while it is
in the event queue. However, if the Python object goes out of scope,
the Python side of this object is garbage collected which leaves a
"dangling" native object. This results in confusing error messages
where PyBind is unable to find the Python implementation of an event
when it is triggered.
Implement reference counting using the generalized reference counting
API instead.
Change-Id: I4e8e04abc4f61dff238d718065f5371e73b38ab3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3222
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
We currently only support deleting an event if it is triggered and not
re-scheduled. This is fine for most native code. However, there are
cases where Python needs to count references to make sure that the
Python object stays live while the native object is live.
Generalise the mechanism used to implement by adding reference
counting hooks to the event base class:
* Event::acquire() / Event::acquireImpl()
* Event::release() / Event::releaseImpl()
These calls can be used to implement both reference counting and the
existing AutoDelete functionality. The default implementation in Event
maintains backwards compatibility with the existing AutoDelete feature
by ignoring acquireImpl() and deleting the event on releaseImpl() if
it isn't scheduled anymore.
Since AutoDelete functionality is no longer the only way events can be
managed, this change introduces the new Managed flag. This flag
activates automatic memory management. The acquireImpl()/releaseImpl()
methods are only called from acquire()/release() it is set. To
maintain backwards compatibility, AutoDelete is used as an alias for
Managed.
Change-Id: I5637984c906a9d44c22780712cf1c521b8297149
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3221
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes a problem with RISC-V initial stack setup in SE mode
where the AT_RANDOM aux vector value contains an address that is too
close to the top of the stack and doesn't fit the required 16 bytes. To
fix this, the program header table was added to the top of the stack
just like the RISC-V proxy kernel does.
Change-Id: I814562e060ff041cd0d7a7c54c3685645bd325a3
Reviewed-on: https://gem5-review.googlesource.com/3401
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
The ISA code for ARM calculates min and max elements for types using
bit manipulation. That triggers some warnings, treated as errors, as
the compiler can tell that there is an overflow and the sign
flips. Fixed using standard lib definitions instead.
Change-Id: Ie2331b410c7f76d4bd87da5afe9edf20c8ac91b3
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3481
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The PyBind wrappers could potentially delete SimObjects if they don't
have any references. This is not desirable since there could be
pointers to such objects within the C++ world. This problem doesn't
normally occur since Python typically holds a pointer to the root node
as long as the simulator is running.
Prevent SimObject and Param deletion by using a PyBind-prescribed
unique_ptr with a dummy deleter as the pointer wrapper for the Python
world.
Change-Id: Ied14602c9ee69a083a69c5dae1b5fcf8efb4548a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3224
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
There is a weird issue with the PyBind wrapper of
vector<AddrRange>. Assigning new values to a param that is a vector of
AddrRange sometimes results in an out-of-bounds memory access.
We work around this issue by treating AddrRange vectors as opaque
types. This slightly changes the semantics of the wrapper since Python
now manipulates the real object rather than a copy that has been
converted to a list.
Change-Id: Ie027c06e7a7262214b43b19a76b24fe4b20426c5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Timothy Hayes <timothy.hayes@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3223
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The readline module is imported by main.py but doesn't seem to be
used.
Change-Id: I7888e3b6ad0a0fedc14b0feec2adf0a39883bbf8
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3421
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Compiling gem5 with recent version of clang (4 and 5) triggers
warnings that are treated as errors:
* Global templatized static functions result in a warning if they
are not used. These should either be declared as static inline or
without the static identifier to avoid the warning.
* Some templatized classes contain static variables. The
instantiated versions of these variables / templates need to be
explicitly declared to avoid a compiler warning.
Change-Id: Ie8261144836e94ebab7ea04ccccb90927672c257
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3420
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.
Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I2a146ae57aac3787389997961208474a97e7c155
Reviewed-on: https://gem5-review.googlesource.com/3360
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
|
|
If the operands were 64 bit, an intermediate calculation could lose a
carry bit. This change rearranges that intermediate calculation if the
operand width is large, and reworks the microop implementation in general
in an attempt to make it easier to understand.
Change-Id: Ib36333f3f2695a33cd9623e43682de22ebd2e7ea
Reviewed-on: https://gem5-review.googlesource.com/3381
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Add a helper function, m5.event.create(), to create events from
Python. This function takes a callable Python object (e.g., a
function) as an argument and optionally a priority as a keyword
argument. This function was accidentally dropped from the public API
when switching to PyBind.
Change-Id: Icbd0e392d9506934ec2c9f541199aa35c1c2df8c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3220
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The style checker complains about line length and ordering for these
files. This fix should make these two files kosher.
Change-Id: I822a0518a98d9e379a543d2017e90c4e9666a58d
Reviewed-on: https://gem5-review.googlesource.com/3380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
If a (regular) store is followed closely enough by a locked load that
overlaps, the LSQ will forward the store's data to the locked load and
never tell the cache about the locked load. As a result, the cache will
not lock the address and all future store-conditional requests on that
address will fail. This patch fixes that by preventing forwarding if
the memory request is a locked load and adding another case to the LSQ
forwarding logic that delays the locked load request if a store in the
LSQ contains all or part of the data that is requested.
[Merge second and last if blocks because their bodies are the same.]
Change-Id: I895cc2b9570035267bdf6ae3fdc8a09049969841
Reviewed-on: https://gem5-review.googlesource.com/2400
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
We don't implement the GICD_IGROUPRn registers, which is allowed, but
to be correct, they should be RAZ/WI (read as zero, writes ignored).
Change-Id: I8039baf72f45c0095f41e165b8e327c79b1ac082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the client does something bad, don't kill the whole simulation, just
complain, drop the client and keep going.
Change-Id: I824f2d121e2fe03cdf4323a25c192b68e0370acc
Reviewed-on: https://gem5-review.googlesource.com/3200
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Currently, if the remote gdb stub fails to read a byte from an incoming
packet because the connection has been dropped, the read call will return
anyway and the calling code will have no way to know something bad
happened. It might reattempt the read over and over again waiting for some
particular byte, doomed to never make forward progress.
This change modifies the remote GDB code so that if a read or write call
fails, it will instead detach from the debugger and continue. Before this
change, When simulating a port scan, ie connecting to the debugger port
and then immediately dropping the connection using this command:
nc -v -n -z -w 1 127.0.0.1 7000
gem5 would enter the previously described death spiral. After it, gem5
detaches from the bad connection and resumes execution. Subsequently
attaching with gdb was successful.
This code is written in a C centric style, and would benefit from some
refactoring.
Change-Id: Ie3c0bb35b9cfe3671d0f731e3907548bae0d292f
Reviewed-on: https://gem5-review.googlesource.com/3180
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Clang's UBSAN implementation complains about macros that expand to
expressions that contain 'defined'. Explicitly set the various feature
macros to 1 or 0 to avoid this issue.
Change-Id: Iba239dacfe526c43ab9c5da5183a350fc4fdc57d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3241
|
|
The DumpStatsPCEventF is declared but lacks an implementation. This
confuses RTTI in clang. Remove this class since it is clearly not
needed.
Change-Id: Ib95f09f2ba8593f8d0e072b96afd5f8a9ed31070
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3240
Reviewed-by: B.A. Zeeb <baz21@cam.ac.uk>
|
|
Now that the switching header implementation has been generalized, there's
no need to have two nearly identical implementations for the two different
groups of headers.
Change-Id: Ie7c24fcddbc672ac5ca2d69bfc35696f42c55580
Reviewed-on: https://gem5-review.googlesource.com/2984
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Factor out the ISA ness of the switching header generating function. Also
turn it into a SCons builder which builds a single header, and a wrapping
method which uses the builder on a group of header files which all target
the same subdirectory.
Change-Id: I87705f97b6ebd9baebd4ebcfea19cc1218a64ad0
Reviewed-on: https://gem5-review.googlesource.com/2983
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This option invokes the Listener::loopbackOnly() static function which
will make the port listeners bind to the loopback device exclusively and
ignore connections on other devices. That prevents external agents like
port scanners from disrupting simulations with spurious connections.
Change-Id: I46b22165046792a6f970826c109bdbce7db25c84
Reviewed-on: https://gem5-review.googlesource.com/3082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ibb405af54a46a93706a6f476b5314491e84be0c8
Reviewed-on: https://gem5-review.googlesource.com/3081
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The loopback device will allow access to various services like remote GDB
debugging, connecting to the terminal, etc., without letting external
agents like port scanners connect and disrupting the simulation.
Change-Id: I76dccbf152fa278ae9f342b25f7e345a1329fbe4
Reviewed-on: https://gem5-review.googlesource.com/3080
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The PyBind11 changes slightly modified gem5's internal debug
interfaces. The corresponding change to the public API went missing
before the new bindings were merged. This change updates the Python
glue to use the new interface.
Change-Id: I3ecca5a3f6c35b99d55126d697371124f81a12dd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Matteo Andreozzi <matteo.andreozzi@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3140
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part
of the CS5 address range in the RS1/RS2 memory map.
Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2965
|
|
Add support for a memory mapped m5op interface. When enabled, the TLB
intercepts accesses in the 64KiB region designated by the
ArmTLB.m5ops_base parameter. An access to this range maps to a
specific m5op call. The upper 8 bits of the offset into the range
denote the m5op function to call and the lower 8 bits denote the
subfunction.
Change-Id: I55fd8ac1afef4c3cc423b973870c9fe600a843a2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2964
|
|
The state transfer code wasn't reading back PSTATE correctly from the
CPU prior to updating the thread context and was incorreclty writing
the register as a 32-bit value when updating KVM. Correctly read back
the state before updating gem5's view of PSTATE and cast the value to
a uint64_t.
Change-Id: I0a6ff5b77b897c756b20a20f65c420f42386360f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2963
Reviewed-by: Rahul Thakur <rjthakur@google.com>
|
|
The value of that variable can be computed more directly and more locally
to where it's consumed.
Change-Id: I5ca1f732a34e22d4dae2aeb6ee7fc8adebe1caa0
Reviewed-on: https://gem5-review.googlesource.com/2981
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
For Value() nodes, the get_contents() method and the get_text_contents()
method are just aliases to the same thing, both of which return a value
which has already been converted using str(). The str() which was included
explicitly in the SConscript was redundant, except that it showed that the
value from get_contents was being treated as a string. To avoid the
redundancy but to still leave a hint to the value's type, this change
converts those bits of code to use get_text_contents() and removes the
str().
Change-Id: I8f7da9b652f749e741b553c9a0e2248ae15ec3ca
Reviewed-on: https://gem5-review.googlesource.com/3084
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
That clues scons in to the fact that the contents of the target of that
function depends on the value of that construction variable.
Change-Id: I803322ea1a178152da3d95dffffe20acd4271c88
Reviewed-on: https://gem5-review.googlesource.com/3083
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This commit fixes a stack-buffer underflow
by fixing the way the array is indexed.
Change-Id: I44400e2b99a2f8e1f48f673cd110b9dcd6480a72
Reviewed-on: https://gem5-review.googlesource.com/3040
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
We're already visiting each of the environments, there's no reason to
track them all and then set up test SConscripts on a second pass.
Change-Id: I2d1166f58ac907e874d6ad5de7bd53ff7ad645f8
Reviewed-on: https://gem5-review.googlesource.com/2980
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Remove SWIG-specific Python code.
Change-Id: If1d1b253d84021c9a8f9a64027ea7a94f2336dff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2922
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
|
|
Remove SWIG guards and SWIG-specific C++ code.
Change-Id: Icaad6720513b6f48153727ef3f70e0dba0df4bee
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2921
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
|
|
Use the PyBind11 wrapping infrastructure instead of SWIG to generate
wrappers for functionality that needs to be exported to Python. This
has several benefits:
* PyBind11 can be redistributed with gem5, which means that we have
full control of the version used. This avoid a large number of
hard-to-debug SWIG issues we have seen in the past.
* PyBind11 doesn't rely on a custom C++ parser, instead it relies on
wrappers being explicitly declared in C++. The leads to slightly
more boiler-plate code in manually created wrappers, but doesn't
doesn't increase the overall code size. A big benefit is that this
avoids strange compilation errors when SWIG doesn't understand
modern language features.
* Unlike SWIG, there is no risk that the wrapper code incorporates
incorrect type casts (this has happened on numerous occasions in
the past) since these will result in compile-time errors.
As a part of this change, the mechanism to define exported methods has
been redesigned slightly. New methods can be exported either by
declaring them in the SimObject declaration and decorating them with
the cxxMethod decorator or by adding an instance of
PyBindMethod/PyBindProperty to the cxx_exports class variable. The
decorator has the added benefit of making it possible to add a
docstring and naming the method's parameters.
The new wrappers have the following known issues:
* Global events can't be memory managed correctly. This was the
case in SWIG as well.
Change-Id: I88c5a95b6cf6c32fa9e1ad31dfc08b2e8199a763
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Andrew Bardsley <andrew.bardsley@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2231
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
A previous change forced scons to spawn child processes by exec-ing it
directly rather than going through the shell because the command line
length would be too long for the shell to handle. Now that incremental
linking should keep the command line lengths more under control, that
change should no longer be necessary.
Change-Id: I9e82a62083afd1414324a7fd697bd6d4b76367ae
Reviewed-on: https://gem5-review.googlesource.com/2947
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The groups won't be perfectly balanced or optimally planned, but this
requires no thought and breaks the object files down into a reasonable
number of reasonably sized groups.
Change-Id: I6542fc807aaf356a9be751093f68e2e29f0b1586
Reviewed-on: https://gem5-review.googlesource.com/2946
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The groups will be linked together into intermediate partially linked
object files. Right now the hierarchy is assumed to be flat, but with some
effort it could be extended to allow truly hierarchical linking.
Change-Id: I77b77710554e5f05e8b00720a0170afaf4afac2d
Reviewed-on: https://gem5-review.googlesource.com/2945
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I94e15ae79f0e73692d882f62fd2b7bf45cf0c841
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2900
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Add a case for the ATA command ATAPI_IDENTIFY_DEVICE.
This avoids the panic: Unsupported ATA command when booting a recent Linux
kernel. This was tested on 4.8.13.
Change-Id: Ib297a2c02da0730d8698c59801254dd0f5ee9f7f
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/2863
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
When a branch micro-op belongs to a flow and the micro-op does not change
the nPC and just updates the nuPC (like a 'rep movs' flow), branching()
function always returns not-taken no matter actual micro-branch outcome.
Provided fix adds to the equation nuPC attribute checking since these kind
of branch micro-op only updates that pointer.
This issue has been found while debugging the performance of a copy-loop
implemented with memcopy function. Without the fix, 'rep movss' internal
micro-branch was always predicted as not-taken causing an squash event
after every branch micro-branch execution.
Using the provided test, branch mispredition went from 1922 without the fix
to 7.
Change-Id: I1bcbefae26aef47e3135817ef99b53d0ea0a98fa
|
|
The command line can be too long, causing bash to choke. This means we can't
use any shell syntax like shell variables or redirection when linking, but
that should be easy to avoid.
Change-Id: Ie6c8ecab337cef6bd3c7e403346ced06f46f0993
Reviewed-on: https://gem5-review.googlesource.com/2780
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Steve Reinhardt <stever@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Allow global stats such as sim_seconds in power equations to make it
possible to convert from event stats to rate stats.
Change-Id: I429abe0ffadc0dbd162eb39e0897143be472ef65
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2720
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch fixes a bug where increasing the mmap region too much causes
it to run into already-allocated memory, which causes gem5 to fail an
assertion. Previously, the stack was incorrectly set up such that the
end of the mmap region and the top of the stack were the same address
and both would grow downward. With this patch, the top of the stack has
been separated from the end of mmap and moved up, and the mmap region
now grows upward instead of downward.
[Rebase to master branch and remove dependencies.]
Change-Id: I7271ff478fff2994f918bc5003a6139b9ba6a520
Reviewed-on: https://gem5-review.googlesource.com/2680
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Iab5070fc9b666fcb5b49b0e2b99a4a1605b3b721
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
There is currently no good way of extracting the current operating
voltage in MathExprPowerModels. This change adds a magic variable,
'voltage', that can be referenced from such expressions to get the
current operating voltage.
Change-Id: Ice3c9a4a221921a542de5da52f83f3f88862d246
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2662
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
MathExprPower model currently doesn't print any useful error messages
if an expression fails to evaluate. To add insult to injury, the model
only detects a failure when dumping stats and not at
initialization. This change adds a verification step in startup() that
ensures that all of the referenced stats actually exist.
Change-Id: I8f71c73341578d5882c8d93e482f5383fbda5f1d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2661
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Multiple outstanding DMA requests introduced new DMA states that didn't
be considered into slicc code. This patch implements the missed DMA state
changes on MOESI_CMP_directory protocol.
Change-Id: I700d441d76556b7e77e0d507904af6ec6ba59cc2
Signed-off-by: Michael LeBeane <michael.lebeane@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/2380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
