| Age | Commit message (Collapse) | Author |
|---|
|
These are for the trap and branch instructions.
Change-Id: Idedab6f3e6c6c954c1f8a36dae52976cf25ad394
Reviewed-on: https://gem5-review.googlesource.com/5461
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
These classes are just used as base classes for other instructions
and don't need to be part of the ISA definition. Pull them into
standard C++ files.
Change-Id: If3e0bd82b1e676f20459bc0293fbda49de66b554
Reviewed-on: https://gem5-review.googlesource.com/5422
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change the definition of PMU events in order to integrate events not
cannot easily be represented by probe points. The software
increment event is now defined as a special type with its separate
implementation in pmu.cc and pmu.hh.
Change-Id: I43874b9641bf38c54f6ba2c26386542b6a73e282
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5764
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I09531e9992e045254e5ee989dd11ccabbf84e4ce
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5763
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.
Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
This fixes a fatal already mapped error in
FuncPageTable::allocate that occurs in some cases
when restoring from a checkpoint.
Change-Id: Ib726a69358118626663e42b7f14889b0d3a98de0
Reported-by: Ruohuang Zheng <zhengruohuang@gmail.com>
Signed-off-by: Austin Harris <austinharris@utexas.edu>
Reviewed-on: https://gem5-review.googlesource.com/5901
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch is fixing the Aarch32 MCR/MRC disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the coprocessor register name
Change-Id: I1937938c43680200cf6c5c9558e835ce2b209adc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5862
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is fixing the Aarch64 MSR/MRS disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the system register name
Change-Id: Iac9d5f2f2fea85abd9a398320ef7aa4844d43c0e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5861
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Suspending the current thread context while draining due to a quiesce
pseudo instruction (for example a wfi instruction) could deadlock the
cpu and prevent it from successfully draining. This change ensures
that the cpu is not draining before suspending the thread context.
Change-Id: I7c019847f5a870d4bc9ce2b19936bc3dc45e5fd7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5881
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Events were not being attached to counters after a checkpoint resume.
By not storing the enable private variable from the stored state the
recreation of the event to counter association is automatically carried.
The enable state is stored in the reg_pmcnten.
Change-Id: I46344df0882a9050c900efb2e8996d64dbfbf297
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Add the power_gating_on_idle option to control whether a core
automatically enters the power gated state. The default behaviour is
to transition to clock gated when idle, but not to power gated. When
this option is set to true, the core automatically transitions to the
power gated state after a configurable latency.
Change-Id: Ida98c7fc532de4140d0e511c25613769b47b3702
Reviewed-on: https://gem5-review.googlesource.com/5741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
If the CPU has been clock gated for a sufficient amount of time
(configurable via pwrGatingLatency), the CPU will go into the OFF
power state. This does not model hardware, just behaviour.
Change-Id: Ib3681d1ffa6ad25eba60f47b4020325f63472d43
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Also, do some minor refactoring to use a BitUnion to pull apart
condition codes, etc.
Change-Id: I0c88878b07a731d0c0fe30f264f53dd795db99ae
Reviewed-on: https://gem5-review.googlesource.com/5421
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
A recent serial device refactoring changed the name of the parameter
that the terminal device gets attached to on the UART. The x86 and
SPARC platform devices didn't get updated though, and were still using
the old name. This change updates those objects.
Reported-by: Kanad Basu <kanad.kut@gmail.com>
Change-Id: I0824a9df8639062d8561420ea9ffea26b8b7e2e9
Reviewed-on: https://gem5-review.googlesource.com/5781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This test has been broken since 70176fecd1ff04 in 2014. The problem was
that the array size in the test was technically not constant because it
was based on an int variable that wasn't declared as const. That
prevented g++ from resolving it as a template parameter. Before the
change mentioned above, the implementation wasn't based on templates.
Change-Id: I6819cf522f9ba4636ac661da368b9bcbae0a813f
Reviewed-on: https://gem5-review.googlesource.com/5821
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Added a check to avoid unlocking/locking the same event queue. Also,
added an optional parameter to enable the migration to be skipped. This
can be useful to disable the synchronization for certain runtime
conditions.
Change-Id: I4b03b3ffff4f9503153cd41dd8aa78705bf16cc4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5730
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch syncs the DRAMPower library of gem5 to the
external github (https://github.com/ravenrd/DRAMPower).
The version pulled in is the commit:
90d6290f802c29b3de9e10233ceee22290907ce6
from 30th Oct. 2016.
This change also modifies the DRAM Ctrl interaction with the
DRAMPower, due to changes in the lib API in the above version.
Previously multiple functions were called to prepare the power
lib before calling the function that would calculate the enery. With
the new API, these functions are encompassed inside the function to
calculate the energy and therefore should now be removed from the
DRAM controller.
The other key difference is the introduction of a new function called
calcWindowEnergy which can be useful for any system that wants
to do measurements over intervals. For gem5 DRAM ctrl that means we
now need to accumulate the window energy measurements into the total
stat.
Change-Id: I3570fff2805962e166ff2a1a3217ebf2d5a197fb
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5724
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch allows the user to specify more than one
power model for any given Clocked Object. This is
useful and some times necessary to properly model
components that have multiple power sources (or
subcomponents) but gem5 doesn't model them.
The ideal solution would be to have a DictParam
to replace the VectorParam so each model can have
a name and can be identified in the stats file.
Change-Id: I4080a7054a16b56069c44750a7a9ce4e674cdf9d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5733
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When ignoring writes to the Dummy ISA device (DummyISADevice),
additionally print the value being ignored in the diagnostic.
Sometimes it is useful to know exactly what we are dropping ...
Change-Id: I9a01623611f0da0aa12b065fbb2031aa27e2c036
Signed-off-by: Sean McGoogan <Sean.McGoogan@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5731
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I5bbf36ef21ac14d9edf68ec6766d33f88e84d308
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5729
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
There are cases where it is desirable to load a kernel and a set of
additional objects. This can, for example, be useful for testing where
the bootstrap code can be loaded from one object (the kernel) and the
test proper from another.
This changeset adds this functionality by adding a kernel_extras
vector parameter to the System class. Object files in this vector are
loaded in order after the kernel when running in full system mode.
Change-Id: I06f57c6a65a17b02eb4267bed0aa829f21bcfa3b
Reviewed-on: https://gem5-review.googlesource.com/5703
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
DSB Instruction shouldn't flush the pipeline, hence the IsSquashAfter
attribute will be removed for either the 32 and 64 bit version.
Change-Id: I98b2b8bc78aa28445ed1a9b5f34645f8d71616ad
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5363
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Writes to DCCMVAC (Data Cache line Clean by VA to PoC) system register
shouldn't flush the pipeline as a result of the operation. This addition
was wrongly introduced for supporting self-modifying code. Software
barriers should be used instead.
Change-Id: Idf0c27d2e49ca01be19888ae5523b8f8eaefa7b3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5362
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This Patch is removing the FlushPipe ArmFault, which was used for
flushing the pipeline in favour of the general IsSquashAfter StaticInstr
flag. Using a fault was preventing tracers from tracing barriers like
ISB and from adding them to the instruction count
Change-Id: I176e9254eca904694f2f611eb486c55e50ec61ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5361
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch introduces the ARM A32/T32/A64 CRC Instructions, which are
mandatory since ARMv8.1. The UNPREDICTABLE behaviours are implemented as
follows:
1) CRC32(C)X (64 bit) instructions are decoded as Undefined in Aarch32
2) The instructions support predication in Aarch32
3) Using R15(PC) as source/dest operand is permitted in Aarch32
Change-Id: Iaf29b05874e1370c7615da79a07f111ded17b6cc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5521
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I017852eac183fac3f914fdb96d7e72a56ea9d682
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5121
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This type expects values in joules (J).
Change-Id: I77a3a4f1c19443f573d5fe7a84d5abd954ce1603
Reviewed-on: https://gem5-review.googlesource.com/5625
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This type was defined, but it was never added to __all__.
Change-Id: I5414829a9562790416f5ceab71af01503d142903
Reviewed-on: https://gem5-review.googlesource.com/5624
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I7299af0e2a6ce9bd2272d6ccb898997336e95e51
Reviewed-on: https://gem5-review.googlesource.com/5623
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
These had a lot of code which duplicated what was already in the
Float param value class. Also, printing into the ini file with "%f"
forces python to truncate values which require more precision than the
fixed float format supports.
Change-Id: Iad9623b71a31d17b69c184082585dcbb881eaa20
Reviewed-on: https://gem5-review.googlesource.com/5622
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ARMv8 Tracers might want to be able to read the intWidth field of the
ArmStaticInst object. The field is specifying the bit width of the
integer registers used by the current instruction.
Change-Id: Iaee3123823a2c7380917001c453377c1c12e54a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch corrects the encoding of the HVC (Hypervisor Call) for the
T32 instruction set.
Change-Id: I6f77eaf5c586697e9ccd588419c61e6d90c6c7bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5541
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The python conversion module was really repetitive and fragmented,
where some types of conversions use common code, and some use hand
written case statements which did something very similar. Also, some
types like Voltage could only handle V and mV but no other scaling
prefix.
This change restructures the module to centralize a lot of the unit
handling code into toFloat, and makes the various other functions use
it.
Change-Id: Ic8529203cc226c9b551b8535a444e3f2f25ad1eb
Reviewed-on: https://gem5-review.googlesource.com/5621
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ica08e93f3873a7eafd02fe7d44c3bdbf0ce7f6b7
Reviewed-on: https://gem5-review.googlesource.com/5565
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
When the XBar receives a Writeback/WriteClean packet, it doesn't need
to snoop the upstream caches. It only queries the snoop filter and
sets the blockCached flag accordingly. This is in line with the
recvTimingReq.
Change-Id: I0ae22f21491d75a111019124bb95bac7b16d3cd3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5043
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
A program running in EL0 is allowed to execute CMOs when the UCI bit
in SCTLR is set. The execution of dc ivac, however, would fault
uncoditionally when executed from EL0. This change aligns the
permission checks for dc ivac with the rest of the CMOs.
Change-Id: I1a532f37707c7dc0748b4375252c6ec0bbf95419
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5058
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Add a dummy serial device that discards any output and doesn't provide
any input. This device can be used to terminate UARTs that don't have
a default device (e.g., a terminal) attached.
Change-Id: I4a6b0b5037ce360f59bfb5c566e1698d113a1d26
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4290
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.
Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.
Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Some ISAs (namely RISC-V) implement getrlimit and setrlimit using
prlimit. This patch adds an implementation for the prlimit system call.
Normally prlimit is supposed to provide the functionality of both
getrlimit and setrlimit, but because gem5 does not support setrlimit
this implementation of prlimit will simply display a warning and return
a failure code if the setrlimit mode is used. The same thing will happen
if a pid other than 0 is passed to it.
Change-Id: I653af2d5a60e716f4d6286196be7600409efcef8
Reviewed-on: https://gem5-review.googlesource.com/5321
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.
Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.
Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device. Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.
Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This commit modifies the default behaviour of the vnc frame dumping
process: rather than using 'Bitmap' as a default parameter value, it is
using 'Auto'. Auto parameter is letting gem5 to choose the most
efficient image format among the available ones.
Change-Id: I3c8e2b5a34a5925d24892880ac362dfe38de36e3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5182
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Originally it was possible to use a Bitmap writer class for dumping a
framebuffer snapshot in a .bmp file. This patch enables you to choose
another format. In particular it implements the writing of PNG Images
using libpng library. The latter has to be already installed in your
machine, otherwise gem5 will default to the Bitmap format. This
configurable writer has been introduced in the VNC frame dumping mechanism,
which is storing changed frame buffers from the VNC server
Change-Id: Id7e5763c82235f1ce90381c8486b85a7cce734ce
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5181
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
When decoding VEX prefixed instructions, the x86 predecoder wasn't walking
past the opcode byte and so was also interpreting it as the modRM byte.
Reported-by: likunxi@fas.harvard.edu
Change-Id: I6d4bdabfa03411704c48d905c50c7b23072fc615
Reviewed-on: https://gem5-review.googlesource.com/5281
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Despite online documentation, the type used for sin_addr.s_addr is not
actually an unsigned long, it is an in_addr_t. When an unsigned long is a 64
bit value, the endian conversion moves the relevant bits of the 32 bit
in_addr_t to positions which are truncated away. This forces the value to 0
which means to bind to any interface, the opposite of the intended effect.
Change-Id: I53c63dea6bd88144dfef1a9a49b478fab30a8ba2
Reviewed-on: https://gem5-review.googlesource.com/5301
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The high speed bit-reversing function is now used
for the Aarch64/32 RBIT instruction implementation.
Change-Id: Id5a8a93d928d00fd33ec4061fbb586b8420a1c1b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5262
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch introduces a high-speed template function for mirroring the
bits (MSB=>LSB) in a variable length word. The function is achieving
high performances since it is using a look-up table.
Change-Id: Ib0d0480e68d902f25655f74d243de305103eff75
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5261
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
